Influence of the chemical composition of leachates on the results of ecotoxicity tests for different slag types.

In this study, four ecotoxicological tests on Vibrio fischeri bacteria, Sinapis alba L. (white mustard), Daphnia magna S. (daphnia's) and earthworms were performed for three types of aqueous slag (ladle, blast furnace and converter) leachates with two-grain sizes (<4 mm, <10 mm). Concentrations of toxic elements and concentrations of Cr(VI), Ca, Na, Al, and other ions were determined. The raw slags were analyzed using X-ray fluorescence spectroscopy (XRFS), and major substances were determined by X-ray powder diffraction (XRD). The aqueous slag leachates passed ecotoxicological tests and met the required criteria, showing no toxicity to Vibrio fischeri and complying with white mustard test criteria. According to the results of the ecotoxicity tests with daphnia, the blast furnace slag samples were not ecotoxic, while two other slag samples were found to be entirely compliant. Characterization of the slags showed that the effect of element/ion leachability and slag grain size is essential. Biplot principal component analysis (PCA) showed that grain size does not significantly affect the separation of individuals on the plane. A positive correlation on toxicity was found with pH, conductivity, calcium content, dissolved content, salinity and fluoride concentration, whereas a negative correlation was found with magnesium concentration, dissolved organic carbon and potassium concentration. The effective concentration at 50% inhibition (EC50) value for Vibrio fischeri correlated with the first dimension of bivariate assessment. In summary, it was found that the investigated slags can be effectively reused as they comply with regulations and do not endanger the environment.

Comparative study of photocatalysis with bulk and nanosheet graphitic carbon nitrides enhanced with silver.

The main goal of this research is to investigate the effectiveness of graphitic carbon nitride (g-C3N4, g-CN) in both bulk and nanosheet forms, which have been surface-modified with silver nanoparticles (Ag NPs), as photocatalysts for the degradation of acid orange 7 (AO7), a model dye. The photodegradation of AO7 dye molecules in water was used to test the potential photocatalytic properties of these powder materials under two different lamps with wavelengths of 368 nm (UV light) and 420 nm (VIS light). To produce Ag NPs (Ag content 0.5, 1.5, and 3 wt%) on the g-CN materials, a new synthesis route based on a wet and low-temperature method was proposed, eliminating the need for reducing agents. The photodegradation activity of the samples increased with increasing silver content, with the best photocatalytic performances achieved for bulk g-CN samples and nanosheet silver-modified samples (with the highest content of 3 wt% Ag) under UV light, i.e., more than 75% and 78%, respectively. The VIS-induced photocatalytic activity of both examined series was higher than that of UV. The highest activities of 92% and 98% were achieved for the 1.5% Ag-modified g-CN bulk and nanosheet materials. This research presents an innovative, affordable, and environmentally friendly chemical approach to synthesizing photocatalysts that can be used for degrading organic pollutants in wastewater treatment.

Synthesis of vacant graphitic carbon nitride in argon atmosphere and its utilization for photocatalytic hydrogen generation.

Graphitic carbon nitride (C3N4) was synthesised from melamine at 550 °C for 4 h in the argon atmosphere and then was reheated for 1-3 h at 500 °C in argon. Two band gaps of 2.04 eV and 2.47 eV were observed in all the synthetized materials. Based on the results of elemental and photoluminescence analyses, the lower band gap was found to be caused by the formation of vacancies. Specific surface areas of the synthetized materials were 15-18 m2g-1 indicating that no thermal exfoliation occurred. The photocatalytic activity of these materials was tested for hydrogen generation. The best photocatalyst showed 3 times higher performance (1547 µmol/g) than bulk C3N4 synthetized in the air (547 µmol/g). This higher activity was explained by the presence of carbon (VC) and nitrogen (VN) vacancies grouped in their big complexes 2VC + 2VN (observed by positron annihilation spectroscopy). The effect of an inert gas on the synthesis of C3N4 was demonstrated using Graham´s law of ammonia diffusion. This study showed that the synthesis of C3N4 from nitrogen-rich precursors in the argon atmosphere led to the formation of vacancy complexes beneficial for hydrogen generation, which was not referred so far.

Potential Ecological Risk and Human Health Risk Assessment of Heavy Metal Pollution in Industrial Affected Soils by Coal Mining and Metallurgy in Ostrava, Czech Republic.

The heavy metal pollution of soils has become serious environmental problem, mainly in localities with high industrialization and rapid growth. The purpose of this detailed research was to determine the actual status of heavy metal pollution of soils and an assessment of heavy metal pollution in a highly industrialized city, Ostrava, with a history of long-term impacts from the metallurgy industry and mining. The ecological risks to the area was subsequently also assessed. The heavy metals Cd, Hg, Cu, Mn, Pb, V, Zn, Cr and Fe were determined in top-soils (0-20 cm) using atomic absorption spectrometry (F AAS, GF AAS) from three areas with different anthropogenic loads. The obtained data expressed as mean metal concentrations were very varied among the sampled soils and values of all analyzed metal concentrations were higher than its background levels. To identify the ecological risk and assessment of soil pollution, various pollution indices were calculated, such as single pollution indices (Igeo, CF, EF, PI) and total complex indices (IPI, PLI, PINemerow, Cdeg, mCdeg, Er and PERI). The identification of pollution sources was assessed using Pearson's correlation analysis and multivariate methods (HCA, PCA/FA). The obtained results confirmed three major groups of metals (Fe-Cr, Pb-Cu and Mn-V). A human health risk was identified in the case of Pb, Cd and Cr, and the HI value of V for children also exceeded 1.

α-Fe2O3 Nanoparticles/Vermiculite Clay Material: Structural, Optical and Photocatalytic Properties.

Photocatalysis is increasingly becoming a center of interest due to its wide use in environmental remediation. Hematite (α-Fe2O3) is one promising candidate for photocatalytic applications. Clay materials as vermiculite (Ver) can be used as a carrier to accommodate and stabilize photocatalysts. Two different temperatures (500 °C and 700 °C) were used for preparation of α-Fe2O3 nanoparticles/vermiculite clay materials. The experimental methods used for determination of structural, optical and photocatalytic properties were X-ray fluorescence (ED-XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM) with energy dispersive X-ray spectrometry (EDS), N2 adsorption method (BET), diffuse reflectance UV-Vis spectroscopy (DRS), photoluminescence spectroscopy (PL) and photocatalytic reduction of CO2, respectively. The data from XRD were confronted with molecular modeling of the material arrangement in the interlayer space of vermiculite structure and the possibility of anchoring the α-Fe2O3 nanoparticles to the surface and edge of vermiculite. Correlations between structural, textural, optical and electrical properties and photocatalytic activity have been studied in detail. The α-Fe2O3 and α-Fe2O3/Ver materials with higher specific surface areas, a smaller crystallite size and structural defects (oxygen vacancies) that a play crucial role in photocatalytic activity, were prepared at a lower calcination temperature of 500 °C.

Toxicity of Diclofenac: Cadmium Binary Mixtures to Algae Desmodesmus subspicatus Using Normalization Method.

Algal test using chlorococcal algae Desmodesmus subspicatus was used to determine single acute toxicity of either diclofenac or cadmium and to assess acute toxicity of their binary mixtures. The test confirmed significant acute toxicity of both diclofenac and cadmium; diclofenac with acute toxicity ErC50 60.44 ± 0.20 mg/L and cadmium with acute toxicity ErC50 2.14 ± 0.02 mg/L. This study of acute toxicity of binary cadmium-diclofenac mixtures confirmed their negative effects on aquatic producers and it also proved influence of the above substances on acute toxicity of their mixtures. Normalization method was applied to predict acute toxicity of binary mixtures composed of chemicals with significantly different acute toxicities. Normalization method used molar ratio (R) of chemicals in binary mixtures as their composition descriptor.

Photocatalytic decomposition of N2O over g-C3N4/WO3 photocatalysts.

Although the nitrous oxide belongs among three of the most contributing greenhouse gases to global warming, it is quite neglected by photocatalytic society. The g-C3N4 and WO3 composites were therefore tested for the photocatalytic decomposition of N2O for the first time. The pure photocatalysts were prepared by simple calcination of precursors, and the composites were prepared by mixing of suspension of pure components in water followed by calcination. The structural (X-ray diffraction, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy), textural (N2 physisorption), and optical properties (diffuse reflectance spectroscopy, photoluminescence spectroscopy, photoelectrochemical measurements) of all composites were correlated with photocatalytic activity. The experimental results and results from characterization techniques confirmed creation of Z-scheme in the WO3/g-C3N4 composites, which was confirmed by hydroxyl radicals' trapping measurements. The photocatalytic decomposition of N2O was carried out in the presence of UVA light (peak intensity at 365 nm) and the 1:2 WO3/g-C3N4 composite was the most active one, but the photocatalytic activity was just negligibly higher than that of pure WO3. This is caused by relatively weak interaction between WO3 and g-C3N4 which was revealed from XPS.

Indices of soil contamination by heavy metals - methodology of calculation for pollution assessment (minireview).

This article provides the assessment of heavy metal soil pollution with using the calculation of various pollution indices and contains also summarization of the sources of heavy metal soil pollution. Twenty described indices of the assessment of soil pollution consist of two groups: single indices and total complex indices of pollution or contamination with relevant classes of pollution. This minireview provides also the classification of pollution indices in terms of the complex assessment of soil quality. In addition, based on the comparison of metal concentrations in soil-selected sites of the world and used indices of pollution or contamination in soils, the concentration of heavy metal in contaminated soils varied widely, and pollution indices confirmed the significant contribution of soil pollution from anthropogenic activities mainly in urban and industrial areas.

Photocatalytic Hydrogen Formation from Ammonia in an Aqueous Solution Over Pt-Enriched TiO2-ZrO2 Photocatalyst.

The aim of this study was to remove ammonia from an aqueous solution by its decomposition to valuable products such as H2 and harmless N2 under UV light. The decomposition of ammonia by photocatalytic process represents an emerging and interesting way of its removal since beside the need of its reduction from the drinking and wastewaters with the respect to its negative impact on human and mammals health, it can lead to generation of hydrogen as an alternative fuel. A laboratory-synthesized Pt/TiO2-ZrO2 photocatalyst was studied and its photocatalytic activity was compared with the activity of commercial TiO2 Evonik P25. The Pt/TiO2-ZrO2 photocatalyst was prepared by combining a sol-gel process controlled within reverse micelles of nonionic surfactant Triton X-114 in cyclohexane, impregnation under vacuum and calcination. Explored photocatalysts were characterized by organic elementary analysis, nitrogen physisorption, XRD, FESEM and UV-Vis spectroscopy. The real platinum content in the Pt/TiO2-ZrO2 photocatalyst was determined by ICP-MS. The photocatalytic decomposition of ammonia was investigated in the time range of 0-12 h. During the first two hours the generation of hydrogen was almost negligible. The generation of hydrogen increased after 4 h of irradiation. Based on time dependences of ammonia decomposition the kinetic rate constants for Pt/TiO2-ZrO2 and TiO2 Evonik P25 photocatalysts were calculated. The ammonia photocatalytic decomposition was described well by the first order kinetic equation. The photocatalytic ammonia decomposition over the platinized TiO2-ZrO2 photocatalyst was proving 2 times higher photocatalytic performance than Evonik P25 (1241 µmol/g(cat) and 665 µmol/g(cat), respectively).