Temperature-Limited Synthesis of Copper Manganites along the Borderline of the Amorphous/Crystalline State and Their Catalytic Activity in CO Oxidation.

Copper manganese oxides (CMO) with CuMn2O4 composition are well-known catalysts, which are widely used for the oxidative removal of dangerous chemicals, e.g., enhancing the CO to CO2 conversion. Their catalytic activity is the highest, close to those of the pre-crystalline and amorphous states. Here we show an easy way to prepare a stable CMO material at the borderline of the amorphous and crystalline state (BAC-CMO) at low temperatures (<100 °C) followed annealing at 300 °C and point out its excellent catalytic activity in CO oxidation reactions. We demonstrate that the temperature-controlled decomposition of [Cu(NH3)4](MnO4)2 in CHCl3 and CCl4 at 61 and 77 °C, respectively, gives rise to the formation of amorphous CMO and NH4NO3, which greatly influences the composition as well as the Cu valence state of the annealed CMOs. Washing with water and annealing at 300 °C result in a BAC-CMO material, whereas the direct annealing of the as-prepared product at 300 °C gives rise to crystalline CuMn2O4 (sCMO, 15-40 nm) and ((Cu,Mn)2O3, bCMO, 35-40 nm) mixture. The annealing temperature influences both the quantity and crystallite size of sCMO and bCMO products. In 0.5% CO/0.5% O2/He mixture the best CO to CO2 conversion rates were achieved at 200 °C with the BAC-CMO sample (0.011 mol CO2/(m2 h)) prepared in CCl4. The activity of this BAC-CMO at 125 °C decreases to half of its original value within 3 h and this activity is almost unchanged during another 20 h. The BAC-CMO catalyst can be regenerated without any loss in its catalytic activity, which provides the possibility for its long-term industrial application.

Synthesis of 3,4-Dihydropyrano[c]chromenes Using Carbon Microsphere Supported Copper Nanoparticles (Cu-NP/C) Prepared from Loaded Cation Exchange Resin as a Catalyst.

AIM AND OBJECTIVE: The present study was performed with the aim to develop an efficient and environmentally benign protocol for the synthesis of biologically siginifcant 3, 4-dihydropyrano[c]chromenes using a new catalytic material. The protocol involves the use of a reusable, environment friendly materials and solvents with operational simplicity. MATERIALS AND METHODS: Carbon microsphere supported copper nanoparticles (Cu-NP/C) prepared from loaded cation exchange resin were synthesized, characterized with well versed analytical techniques such as XRD, SEM and Raman spectroscopy and the synthesized material was used as a catalyst for the environmentally benign synthesis of 3,4-dihydropyrano[c]chromenes. RESULTS: The formation of carbon microsphere supported copper nanoparticles (Cu-NP/C) prepared from loaded cation exchange resin was confirmed by XRD, SEM and Raman spectroscopy which was employed as a heterogeneous material for the synthesis of 3,4-dihydropyrano[c]chromenes. The products formed were characterized by the analysis of spectroscopic data - NMR, IR and mass. The safe catalytic system offers several advantages including operational simplicity, environmental friendliness, high yield, and reusability of catalyst and green chemical transformation. CONCLUSION: Herein we report an easy and efficient protocol for the one-pot synthesis of dihydropyrano[ c]chromenes using environmentally benign MCR approach in ethanol as the green solvent. The method developed herein constitutes a valuable addition to the existing methods for the synthesis of titled compounds.

Proton Triggered Colorimetric and Fluorescence Response of a Novel Quinoxaline Compromising a Donor-Acceptor System.

Quinoxaline-based novel acid-responsive probe Q1 was designed on the basis of a conjugated donor-acceptor (D-A) subunit. Q1 shows colorimetric and fluorometric changes through protonation and deprotonation in dichloromethane. With the addition of the trifluoroacetic acid (TFA), UV-vis absorption spectral changes in peak intensity of Q1 was observed. Moreover, the appearance of a new peaks at 284 nm 434 nm in absorption spectra with the addition of TFA indicating protonation of quinoxaline nitrogen and form Q1.H⁺ and Q1.2H⁺. The emission spectra display appearance of new emission peak at 515 nm. The optical property variations were supported by time resolved fluorescence studies. The energy band gap was calculated by employing cyclic voltammetry and density functional calculations. Upon addition of triethylamine (TEA) the fluorescence emission spectral changes of Q1 are found to be reversible. Q1 shows color changes from blue to green in basic and acidic medium, respectively. The paper strip test was developed for making Q1 a colorimetric and fluorometric indicator.

Ethylene glycol promoted catalyst-free pseudo three-component green synthesis of bis(coumarin)s and bis(3-methyl-1-phenyl-1H-pyrazol-5-ol)s.

An ethylene glycol promoted catalyst-free practically efficient and sustainable approach has been developed for the synthesis of several benzylidene-bis-(4-hydroxycoumarin)s and 4,[Formula: see text]-(arylmethylene)-bis(3-methyl-1-phenyl-1H-pyrazol-5-ol)s by the pseudo three-component reaction of an aldehyde with 4-hydroxycoumarin and 3-methyl-1-phenylpyrazol-5-one, respectively. Inexpensive, non-toxic, and easily available ethylene glycol used as the reaction solvent and promoter renders an efficient protocol in terms of catalyst-free reaction conditions, short reaction time, high yield, practical utility, and green approach.

Inhibition of Helicobacter pylori and Its Associate Urease by Labdane Diterpenoids Isolated from Andrographis paniculata.

The present study was carried out to evaluate anti-Helicobacter pylori and its associated urease activity of labdane diterpenoids isolated from Andrographis paniculata. A molecular docking analysis was performed by using ArgusLab 4.0.1 software. The results obtained indicate that compound A possesses strong inhibition to H. pylori, 28 ± 2.98 (minimum inhibitory concentration, 9 µg/mL), and its urease, 85.54 ± 2.62% (IC50 , 20.2 µg/mL). Compounds B, C, and D also showed moderate inhibition to H. pylori and its urease. The obtained results were in agreement with the molecular docking analysis of compounds. The phytochemicals under investigation were found to be promising antibacterial agents. Moreover, the isolated compounds can be considered as a resource for searching novel anti-H. pylori agents possessing urease inhibition.

Synthesis of indazole motifs and their medicinal importance: an overview.

Indazoles is an important class of heterocyclic compounds having a wide range of biological and pharmaceutical applications. There is enormous potential in the synthesis of novel heterocyclic systems to be used as building blocks for the next generation of pharmaceuticals as anti-bacterial, anti-depressant and anti-inflammatory. Fused aromatic 1H and 2H-indazoles are well recognized for anti-hypertensive and anti-cancer properties. The present review focuses on novel routes of their synthesis and various biological activities.

Stability-Indicating LC Method for the Determination of Prasugrel Hydrochloride in Pharmaceutical Dosage Form.

A simple, rapid and precise method was developed for the quantitative estimation of prasugrel hydrochloride in pharmaceutical dosage form. A chromatographic separation of prasugrel and its degradants was achieved with Zorbax XDB C(8), 150 × 4.6 mm, 3.5µm analytical column using aqueous solution of 0.05 M ammonium acetate pH 4.5 with acetic acid-acetonitrile (40:60 v/v). The instrumental settings include flow rate of 1.0 ml/min, column temperature at 30°C and detector wavelength of 254 nm using a photodiode array detector. Theoretical plates for prasugrel were 7023. Tailing factor for prasugrel was 1.11. Prasugrel was exposed to thermal, photolytic, hydrolytic and oxidative stress conditions, and the stressed samples were analyzed by the proposed method. Peak homogeneity data of prasugrel was obtained using photodiode array detector in the stressed sample chromatograms, which demonstrated the specificity of the method for the estimation in presence of degradants. The described method showed excellent linearity over a range of 10-300 µg/ml for prasugrel. The correlation coefficient is 0.999. The relative standard deviation of peak area for six measurements is always less than 2%. Overall, the proposed method was found to be suitable and accurate for quantitative determination and stability study of prasugrel in pharmaceutical dosage form.

Pharmacokinetic and efficacy study of cisplatin and paclitaxel formulated in a new injectable poly(sebacic-co-ricinoleic acid) polymer.

Injectable biodegradable polymer poly(sebacic-co-ricinoleic acid), P(SA-RA) is currently under development for intratumoral (IT) delivery of drugs for treating solid tumors. This study presents formulation development, pharmacokinetic and efficacy studies of two anticancer drugs (cisplatin and paclitaxel) formulated with P(SA-RA) polymer. In pharmacokinetic study, systemic exposure and pharmacokinetic parameters of cisplatin/paclitaxel following single intravenous (IV) or subcutaneous (SC) doses of cisplatin/paclitaxel was compared with intramuscular (IM) or SC doses of cisplatin/paclitaxel formulated with P(SA-RA) polymer in male CD rat. Simultaneously, the tumor reduction effect and toxicity for these formulations were evaluated in human FaDu head and neck tumor xenograft subcutaneous nude mouse model. Pharmacokinetic data reflect the lower maximal concentrations and sustained release of polymer-cisplatin/paclitaxel formulations compared to standard cisplatin/paclitaxel administration. Regarding efficacy study, a single IT or near the tumor injection (NT) of polymer-paclitaxel or polymer-cisplatin formulation significantly reduced the tumor size, compared to the standard paclitaxel or cisplatin treatments. No death or toxicity and no effect on body weight as well as macroscopic and/or microscopic changes in or near the injected area were observed, proving biocompatibility and acceptability of polymer-formulations. In conclusion, the developed formulation demonstrated controlled release and significant efficacy in delivering these agents and exhibit potential for further clinical development.

Ionic liquid promoted synthesis, antibacterial and in vitro antiproliferative activity of novel α-aminophosphonate derivatives.

Ionic liquid ethyl ammonium nitrate is used as an excellent catalyst and solvent for three-component one-pot reaction of an aldehydes, amines and diethylphosphite to form novel α-aminophosphonates at room temperature. Among the various catalysts, the preparation of ethyl ammonium nitrate is an environmental friendly, cost effective and recyclable catalyst. Compounds 4b, 4c, 4d, 4f and 4j were found more potent antibacterials against pathogenic microorganisms. Whereas, compounds 4a, 4g, 4h and 4j inhibits growth of active Escherichia coli NCIM 2645 and Salmonella typhi NCIM 2501. Compound 4j was found a promising antiproliferative agent against A549 and SK-MEL2 human melanoma cell lines.

An efficient protocol for the synthesis of 2-amino-4,6-diphenylpyridine-3-carbonitrile using ionic liquid ethylammonium nitrate.

Chalcones on condensation with malononitrile and ammonium acetate in the presence of ionic liquid ethylammonium nitrate affords the corresponding 2-amino-4, 6-diphenylpyridine-3-carbonitrile in excellent yield. The ionic liquid is recycled and reused several times.