Glenohumeral mechanics: a study of articular geometry, contact, and kinematics.

Stereophotogrammetry was used to investigate the functional relations between the articular surface geometry, contact patterns, and kinematics of the glenohumeral joint. Nine normal shoulder specimens were elevated in the scapular plane by using simulated muscle forces in neutral rotation (NR) and starting rotation (SR). Motion was quantified by analyzing the translations of the geometric centers of the humeral head cartilage and bone surfaces relative to the glenoid surface. In both NR and SR, the ranges of translations of the center of the humeral head cartilage surface were greatest in the inferior-superior direction (NR 2.0 +/- 0.7 mm, SR 2.9 +/- 1.2 mm). Results of this study also show that joints with less congruence of the articular surfaces exhibit larger translations, and elevation in SR yields greater translations than in NR. Kinematic analyses with the humeral head bone surface data yielded larger values of translation than analyses that used the cartilage surface data, suggesting that similar overestimations may occur in radiographic motion studies. Results of this study demonstrate that small translations of the humeral head center occurred in both SR and NR. The proximity of the origin of the helical axes to the geometric center of the humeral head articular surface confirmed that glenohumeral elevation is mainly rotation about this geometric center with small translations.

Effects of repetitive subfailure strains on the mechanical behavior of the inferior glenohumeral ligament.

The mechanical response of the inferior glenohumeral ligament to varying subfailure cyclic strains was studied in 33 fresh frozen human cadaver shoulders. The specimens were tested as bone-ligament-bone preparations representing the 3 regions of the inferior glenohumeral ligament (superior band and anterior and posterior axillary pouches) through use of uniaxial tensile cycles. After mechanical preconditioning, each specimen was subjected to 7 test segments, consisting of a baseline strain level L1 (400 cycles) alternating with either 1 (group A, 10 shoulders), 10 (group B, 13 shoulders), or 100 (group C, 10 shoulders) cycles at increasing levels (L2, L3, L4) of subfailure strain. Cycling to higher levels of subfailure strain (L2, L3, L4) produced dramatic declines in the peak load response of the inferior glenohumeral ligament for all specimens. The group of ligaments subjected to 100 cycles of higher subfailure strains demonstrated a significantly greater decrease in load response than the other 2 groups. Ligament elongation occurred with cyclic testing at subfailure strains for all 3 groups, averaging 4.6% +/- 2.0% for group A, 6.5% +/- 2.6% for group B, and 7.1% +/- 3.2% for group C. Recovery of length after an additional time of nearly 1 hour was minimal. The results from this study demonstrate that repetitive loading of the inferior glenohumeral ligament induces laxity in the ligament, as manifested in the peak load response and measured elongations. The mechanical response of the ligament is affected by both the magnitude of the cyclic strain and the frequency of loading at the higher strain levels. The residual length increase was observed in all of the specimens and appeared to be largely unrecoverable. This length increase may result from accumulated microdamage within the ligament substance, caused by the repetitively applied subfailure strains. The clinical relevance of the study is that this mechanism may contribute to the development of acquired glenohumeral instability, which is commonly seen in the shoulders of young athletes who participate in repetitive overhead sports activities.

Osteoarthritic changes in the biochemical composition of thumb carpometacarpal joint cartilage and correlation with biomechanical properties.

The biochemical composition and biomechanical properties of articular cartilage from 53 human thumb carpometacarpal (CMC) joints from cadavers aged 20 to 79 years were measured and studied in normal, mildly fibrillated, and advanced osteoarthritic (OA) joints. Statistical analyses were performed to determine the correlations between the compositional measures and biomechanical properties. For these CMC joint tissues we found that water content increased, proteoglycan content decreased, and collagen content per dry weight remained unaltered with progression of OA degeneration. We also found that with disease progression, as defined by an OA staging score, the aggregate modulus (ie, compressive stiffness) decreased, along with an unexpected moderate decrease in permeability. This latter finding appears to be specific to CMC cartilage degeneration since articular cartilage from knees and hips generally demonstrates an increase in permeability with water content and OA score. Correlations between biochemical composition and biomechanical properties were found to be stronger in joints with OA than in joints without OA. This finding suggests that OA changes in biochemical composition, relative to baseline normal values, directly affect the biomechanical properties of cartilage, even though the baseline compositional values themselves do not directly determine the magnitude of the biomechanical properties in normal tissue.

Thenar insertion of abductor pollicis longus accessory tendons and thumb carpometacarpal osteoarthritis.

Although the etiology of osteoarthritis of the thumb carpometacarpal (CMC) joint remains unclear, some theories have focused on variations in the local anatomy of the abductor pollicis longus tendon insertion. This cadaver study of 68 specimens analyzed the relationship between a thenar insertion of an accessory abductor pollicis longus tendon and the presence and severity of thumb CMC osteoarthritis. The joint cartilage surfaces were visually graded for degenerative changes. Thirty-five of 68 specimens (51%) had a thenar insertion, most frequently inserting on either the abductor pollicis brevis or opponens pollicis fascia or muscle belly. No significant association between a thenar insertion and thumb CMC arthritis was observed. Conversely, increasing age was noted to have a significant association with degenerative joint disease. Thus, these findings indicate that a thenar slip of the abductor pollicis longus tendon does not correlate with the presence or severity of CMC osteoarthritis.

Topography of the osteoarthritic thumb carpometacarpal joint and its variations with regard to gender, age, site, and osteoarthritic stage.

The articular topography of 46 osteoarthritic thumb carpometacarpal joints was quantitatively analyzed, as well as variations with regard to gender, age, site, and anatomic osteoarthritic stage. It was found that for osteoarthritic thumb carpometacarpal joints, (1) the opposing articular surfaces of elder and severely degenerated joints are more congruent than those of middle-aged and minimally or moderately degenerated joints, although the articular contact area is not significantly different when accounting for thinning of the cartilage layer with age or disease; (2) significant changes in joint topography due to osteoarthritis only occur in severely degenerated joints; (3) joints in women are less congruent, have smaller contact areas, and are likely to experience higher contact stresses than joints in men for similar activities of daily living that involve similar joint loads; and (4) osteoarthritic changes are less severe on the dorsoulnar aspect of the trapezium and the dorsal aspect of the metacarpal, which are known to be low load-bearing regions.

Inferior glenohumeral ligament: geometric and strain-rate dependent properties.

The inferior glenohumeral ligament (IGHL) is an important structure for maintaining shoulder stability. This study was aimed at determining the geometric and anatomic characteristics of the IGHL and its tensile properties at a higher strain rate than previously tested. Eight fresh-frozen human cadaver shoulders (average age 69 years, age range 62 to 73 years) from four female and four male cadavers were used to harvest bone-ligament-bone specimens from the three regions of the IGHL (superior band, anterior axillary pouch, and posterior axillary pouch). Uniaxial tensile tests were performed at the moderately high strain rate of approximately 10% per second with a servo-hydraulic testing machine. This represented a strain rate that was approximately 100 to 1000 times faster than that previously reported. During tensile testing, bone-ligament-bone strains were calculated from grip-to-grip motion on the testing machine, and mid-substance strains were determined by a video dimensional analyzer. Although all regions of the IGHL had similar lengths (averaging 43.4 mm), their thickness varied by region and by proximal-to-distal location. The superior band was the thickest (2.23 +/- 0.38 mm) of the three regions. Of the remaining two regions the anterior axillary pouch (1.94 +/- 0.38 mm) was thicker than the posterior axillary pouch (1.59 +/- 0.64 mm). By proximal-to-distal location the IGHL was thicker for all three regions near the glenoid (2.30 +/- 0.57 mm) than near the humerus (1.61 +/- 0.52 mm). The superior band had a greater stiffness (62.63 +/- 9.78 MPa) than either the anterior axillary pouch (47.75 +/- 17.89 MPa) or the posterior axillary pouch (39.97 +/- 13.29 MPa). Tensile stress at failure was greater in the superior band (8.4 +/- 2.2 MPa) and the anterior axillary pouch (7.8 +/- 3.1 MPa) than the posterior axillary pouch (5.9 +/- 1.7 MPa). The anterior axillary pouch demonstrated greater bone-to-bone and mid-substance strains (30.4% +/- 4.3% and 10.8% +/- 2.4%, respectively) before failure than the other two regions (superior band: 20.8% +/- 3.8% and 9.1% +/- 2.8%, respectively; posterior axillary pouch: 25.2% +/- 5.8% and 7.8% +/- 2.6%, respectively). Bone-to-bone strain was always greater than mid-substance strain, indicating that when the IGHL is stretched, the tissue near the insertion sites will experience much greater strain than the tissue in the mid-substance. insertion failures were more likely at slower strain rates, and ligamentous failures were predominant at the fast strain rate. When compared with other tensile studies of the IGHL at slower strain rates (0.01% per second and 0.1% per second), the superior band and the anterior axillary pouch demonstrated the viscoelastic effects of increased stiffness and failure stress. This superior band and anterior axillary pouch pouch viscoelastic stiffening effect suggests that these two regions may function to restrain the humeral head from rapid abnormal anterior displacement in the clinically vulnerable position of abduction and external rotation.

Contact areas in the thumb carpometacarpal joint.

The thumb carpometacarpal joint is a common site of osteoarthritis. It has been hypothesized that peaks of localized stress on the dorsoradial or volar-ulnar regions, or both, of the articular surfaces of the trapezium and metacarpal lead to erosion of cartilage and may be responsible for the progression of the disease. The objective of this study was to determine the contact areas in this joint under the functional position of lateral (key) pinch and in the extremes of range of motion of the joint. These contact areas were assessed relative to the observed sites of cartilage thinning. Eight hands from cadavers of women and five from cadavers of men were tested in vitro with the thumb under a 25 N load in the lateral pinch position, and under small muscle loads (0-5 N) with the thumb in flexion, extension, abduction, adduction, and neutral positions. Contact areas of articular surfaces of the thumb carpometacarpal joint were determined for these positions using a stereophotogrammetric technique. The lateral pinch position produced contact areas predominantly on the central, volar, and volar-ulnar regions of the trapezium and the metacarpal. In three specimens, contact areas were distinctly separated between the dorsoradial and volar-ulnar regions, and in one specimen, from a man, contact occurred exclusively on the dorsoradial region of the trapezium. Using stereophotogrammetry, maps of cartilage thickness also were determined for a subset of nine specimens. The volar-ulnar, ulnar, and dorsoradial regions of the trapezium were the most common sites of thin cartilage, and these may be sites of cartilage wear.(ABSTRACT TRUNCATED AT 250 WORDS)

Excursion of the rotator cuff under the acromion. Patterns of subacromial contact.

Nine fresh-frozen, human cadaveric shoulders were elevated in the scapular plane in two different humeral rotations by applying forces along action lines of rotator cuff and deltoid muscles. Stereophotogrammetry determined possible regions of subacromial contact using a proximity criterion; radiographs measured acromiohumeral interval and position of greater tuberosity. Contact starts at the anterolateral edge of the acromion at 0 degrees of elevation; it shifts medially with arm elevation. On the humeral surface, contact shifts from proximal to distal on the supraspinatus tendon with arm elevation. When external rotation is decreased, distal and posterior shift in contact is noted. Acromial undersurface and rotator cuff tendons are in closest proximity between 60 degrees and 120 degrees of elevation; contact was consistently more pronounced for Type III acromions. Mean acromiohumeral interval was 11.1 mm at 0 degrees of elevation and decreased to 5.7 mm at 90 degrees, when greater tuberosity was closest to the acromion. Radiographs show bone-to-bone relationship; stereophotogrammetry assesses contact on soft tissues of the subacromial space. Contact centers on the supraspinatus insertion, suggesting altered excursion of the greater tuberosity may initially damage this rotator cuff region. Conditions limiting external rotation or elevation may also increase rotator cuff compression. Marked increase in contact with Type III acromions supports the role of anterior acromioplasty when clinically indicated, usually in older patients with primary impingement.

Computer simulation of glenohumeral and patellofemoral subluxation. Estimating pathological articular contact.

Analytic stereophotogrammetry and an interactive computer graphics program were used to obtain first order assessments of joint contact patterns in patellofemoral and glenohumeral joints, simulating normal and abnormal articulations. Precise (90 microns accuracy) computer graphic representations of the humeral head, glenoid, patella, and femoral articular surfaces were obtained from cadaver knees and shoulders. These surface representations were then manipulated into an articulated position, and joint contact areas computed by a proximity criterion. Pathologic states were then simulated, and contact recomputed. Simulated glenohumeral subluxations dramatically reduced contact area, and focused it eccentrically on the glenoid rim. Simulated size mismatch of humeral heads to glenoids reduced contact area, producing a pattern of peripheral contact on the glenoid if the humeral head had a larger radius of curvature, and central contact on the glenoid if the humeral head had a smaller radius of curvature. At 30 degrees knee flexion, the patellofemoral joint demonstrated a broad distribution of contact along the distal aspect of the patella and proximal aspect of the trochlea. Simulated lateral tilt (5 degrees) and translation (5 mm) of the patella resulted in shift of the predominant contact area laterally, along with a drastic decrease in the contact area. These results have implications for prosthetic sizing and biomechanical modeling of the glenohumeral and patellofemoral joints, and in selecting models for more rigorous empiric studies of joint contact. Furthermore, this technique allows a first order assessment of the effects of specific surgical reconstructions on articular mechanics.

Quantitation of in situ contact areas at the glenohumeral joint: a biomechanical study.

Glenohumeral arthritis may result from abnormal articular mechanics, and shoulder reconstructive procedures often rely implicitly on the belief that the restoration of normal articular mechanics is required to obtain satisfactory clinical results. Despite this, limited knowledge of normal or pathologic glenohumeral joint articular mechanics and contact is available. This study uses a stereophotogrammetry technique to determine contact areas in normal cadaver glenohumeral joints with intact ligaments and capsule through a large range of motion using simulated forces of the four rotator cuff muscles and three deltoid heads. All shoulders were first elevated to their maximum elevation in the scapular plane at an external rotation (starting rotation = 40 +/- 8 degrees), which allowed each shoulder to attain its maximal elevation in the scapular plane, and then repeated at 20 degrees internal to this rotation. Contact areas consistently increased with increasing elevation until 120 degrees to an average of 5.07 cm2 before decreasing with further increased elevation to an average of 2.59 cm2 at 180 degrees of total arm elevation. At 20 degrees internal to the starting rotation, contact areas reached high values 60 degrees earlier (averaged 4.56 cm2 at 60 degrees of total arm elevation) and then remained fairly constant through 120 degrees before decreasing with further increased elevation to 2.51 cm2 at 180 degrees total arm elevation. With increasing elevation in the external starting rotation, humeral head contact dramatically migrates from an inferior region to a superocentral-posterior region while glenoid contact shifts posteriorly. When the humeral shaft is positioned 20 degrees internal to the starting rotation, humeral head contact shifts from inferocentral-anterior to superocentral-posterior regions. Simultaneously, a similar posterior shift in glenoid contact is observed. Furthermore, whereas only a small portion of the humeral head surface area is in contact in any given position, contact on the glenoid surface is much more uniformly distributed over its entire articulating surface.

Tensile properties of the inferior glenohumeral ligament.

The tensile properties of the inferior glenohumeral ligament have been determined in 16 freshly frozen cadaver shoulders. The inferior glenohumeral ligament was divided into three anatomical regions: a superior band, an anterior axillary pouch, and a posterior axillary pouch. This yielded 48 bone-ligament-bone specimens, which were tested to failure in uniaxial tension. The superior band was consistently the thickest region, averaging 2.79 mm. The thickness of the inferior glenohumeral ligament decreased from antero-superiorly to postero-inferiorly. The resting length of all three anatomical regions was not statistically different. Total specimen strain to failure for all bone-ligament-bone specimens averaged 27%. Variations occurred between the three regions, with the anterior pouch specimens failing at a higher strain (34%) than those from the superior band (24%) or the posterior pouch (23%). Strain to failure for the ligament midsubstance (11%) was found to be significantly less than that for the entire specimen (27%). Thus, larger strain must occur near the insertion sites of the inferior glenohumeral ligament. Stress at failure was found to be nearly identical for the three regions of the ligament, averaging 5.5 MPa. These values are lower than those reported for other soft tissues, such as the anterior cruciate ligament and patellar tendon. The anterior pouch was found to be less stiff than the other two regions, perhaps suggesting that it is composed of more highly crimped collagen fibers. Three failure sites were seen for the inferior glenohumeral ligament: the glenoid insertion (40%), the ligament substance (35%), and the humeral insertion (25%). In addition, significant capsular stretching occurred before failure, regardless of the failure mode.

Bioengineering activities at the New York Orthopaedic Hospital Research Laboratory.

The studies described above are representative of the Laboratory's long-standing dedication to the philosophy of multi-disciplinary research. Results from these studies will continue to provide new insights as to the function of diarthrodial joints, articular cartilage and other hydrated soft tissues. It appears reasonable to expect that in the years ahead we will have a better understanding of the mechanisms behind histomorphogenesis, growth, functional adaptation, regeneration, ageing and degeneration of connective tissues and osteoarthritis resulting from these investigations being conducted at the New York Orthopaedic Hospital Research Laboratory.

A non-operative salvage of surgically-resistant pseudarthroses and non-unions by pulsing electromagnetic fields. A preliminary report.

This report documents, for the first time, to the authors' knowledge, the therapeutic use in humans of low energy, electromagnetic fields pulsing in the extremely low frequency (E.L.F.) range. These fields, established outside the body, were used to treat congenital and acquired pseudarthroses and non-unions. Energy of this type appears to affect biological processes, not through heat production, but through electrically-induced changes in the environment of cells within the organism. Of the 29 patients included in the study, 17 had experienced at least one failure of surgical repair and, in each of these, amputation had been recommended. The overall success rate, including those patients treated with inadequate pulse characteristics and those who failed to follow the protocol, was in excess of 70 per cent. Improvements in the specificity of pulse characteristics hold promise for increasing the rate of success. The simple, clinical methodology, which is conducted on an out-patient basis, appears to be both safe and effective. It can be applied with or without surgery. This approach requires additional controlled investigations before it is ready for general use in the orthopaedic community. The indications for amputation of surgically-resistant pseudarthroses, however, should be reassessed. The principles and technology, which have been established during this endeavor, may have physiologic and practical significance for processes other than pseudarthrosis and non-union.

In vivo effects of direct current in the mandible.

The application of low level direct current (3 to 5 mua in situ, that is, 50 mua/cm2), within the mandible of mature Beagle dogs results in an increased osteogenesis at the cathode (negative electrode) when compared to responses about nonactive (control) packs within the same dog. The increased osteogenesis suggests a stimulation of cellular activity rather than the electrophoretic migration of cells. Significant differences observed between platinum-iridium and stainless-steel electrodes seem to suggest that faradaic results play little or no role in the osteogenic response at the platinum-iridium cathode. Conversely, at all other electrodes, faradaic reactions compete to some extent with an osteogenic response. Careful consideration of current density and electrode composition must be taken into account when direct current stimulation is to be used.

Augmentation of bone repair by inductively coupled electromagnetic fields.

Pulsing electromagnetic fields of low frequency and strength have been inductively coupled across skin, directly to bone, to enhance the repair of canine osteotomies. The induced voltage field in bone appears to increase the organization and strength of the repair process at 28 days after "fracture."