Treatment of aqueous wastes by means of Thermophilic Aerobic Membrane Reactor (TAMR) and nanofiltration (NF): process auditing of a full-scale plant.

This work focuses on the Thermophilic Aerobic Membrane Reactor (TAMR) process. The research was carried out on a full-scale facility where, all along a 12-year period, daily monitoring and process audit tests were conducted for the process analysis and optimization. The plant treated -light and high-strength aqueous wastes and two different configurations were adopted: (1) thermophilic biological reactor + ultrafiltration (TAMR) and (2) TAMR + nanofiltration (TAMR + NF). In the latter case, the average chemical oxygen demand removal yield was equal to 89% and an effective denitrification (nitrogen oxides removal equal to 96%) was achieved by reducing the dissolved oxygen concentration in the bioreactor. Low specific sludge production was observed. Poor sludge settling properties were measured by a lab-scale settling test; respirometric tests (nitrogen uptake rate and ammonia uptake rate) showed the presence of denitrification and the inhibition of nitrification. Hydrodynamic tests revealed the presence of a significant dead space, thus showing room for improving the overall process performance. Finally, the rheological properties of the sludge were measured as a function of the biomass concentration, pH, temperature, and aeration scheme.

Is anaerobic digestion effective for the removal of organic micropollutants and biological activities from sewage sludge?

The occurrence of emerging organic micropollutants (OMPs) in sewage sludge has been widely reported; nevertheless, their fate during sludge treatment remains unclear. The objective of this work was to study the fate of OMPs during mesophilic and thermophilic anaerobic digestion (AD), the most common processes used for sludge stabilization, by using raw sewage sludge without spiking OMPs. Moreover, the results of analytical chemistry were complemented with biological assays in order to verify the possible adverse effects (estrogenic and genotoxic) on the environment and human health in view of an agricultural (re)use of digested sludge. Musk fragrances (AHTN, HHCB), ibuprofen (IBP) and triclosan (TCS) were the most abundant compounds detected in sewage sludge. In general, the efficiency of the AD process was not dependent on operational parameters but compound-specific: some OMPs were highly biotransformed (e.g. sulfamethoxazole and naproxen), while others were only slightly affected (e.g. IBP and TCS) or even unaltered (e.g. AHTN and HHCB). The MCF-7 assay evidenced that estrogenicity removal was driven by temperature. The Ames test did not show point mutation in Salmonella typhimurium while the Comet test exhibited a genotoxic effect on human leukocytes attenuated by AD. This study highlights the importance of combining chemical analysis and biological activities in order to establish appropriate operational strategies for a safer disposal of sewage sludge. Actually, it was demonstrated that temperature has an insignificant effect on the disappearance of the parent compounds while it is crucial to decrease estrogenicity.

High-strength wastewater treatment in a pure oxygen thermophilic process: 11-year operation and monitoring of different plant configurations.

This research was carried out on a full-scale pure oxygen thermophilic plant, operated and monitored throughout a period of 11 years. The plant treats 60,000 t y⁻¹ (year 2013) of high-strength industrial wastewaters deriving mainly from pharmaceuticals and detergents production and landfill leachate. Three different plant configurations were consecutively adopted: (1) biological reactor + final clarifier and sludge recirculation (2002-2005); (2) biological reactor + ultrafiltration: membrane biological reactor (MBR) (2006); and (3) MBR + nanofiltration (since 2007). Progressive plant upgrading yielded a performance improvement chemical oxygen demand (COD) removal efficiency was enhanced by 17% and 12% after the first and second plant modification, respectively. Moreover, COD abatement efficiency exhibited a greater stability, notwithstanding high variability of the influent load. In addition, the following relevant outcomes appeared from the plant monitoring (present configuration): up to 96% removal of nitrate and nitrite, due to denitrification; low-specific biomass production (0.092 kgVSS kgCODremoved⁻¹), and biological treatability of residual COD under mesophilic conditions (BOD5/COD ratio = 0.25-0.50), thus showing the complementarity of the two biological processes.

Tertiary ozonation of industrial wastewater for the removal of estrogenic compounds (NP and BPA): a full-scale case study.

Wastewater treatment plant (WWTP) effluents are considered to be a major source for the release in the aquatic environment of endocrine-disrupting compounds (EDCs). Ozone has proved to be a suitable solution for polishing secondary domestic effluents. In this work, the performance of a full-scale ozonation plant was investigated in order to assess the removal efficiency of four target EDCs: nonylphenol, nonylphenol monoethoxylate, nonylphenol diethoxylate and bisphenol A. The studied system was the tertiary treatment stage of a municipal WWTP which receives an important industrial (textile) load. Chemical analyses showed that the considered substances occurred with a significant variability, typical of real wastewaters; based on this, ozonation performance was carefully evaluated and it appeared to be negatively affected by flow-rate increase (during rainy days, with consequent contact time reduction). Moreover, EDCs' measured removal efficiency was lower than what could be predicted based on literature data, because of the relatively high residual content of biorefractory compounds still present after biological treatment.

How green are environmental technologies? A new approach for a global evaluation: the case of WWTP effluents ozonation.

The research on the impact of chemical pollution is now increasingly attracted by the topic of organic micropollutants: as secondary biological treatment of wastewater does not provide the complete elimination of these substances, an advanced treatment downstream the biological process can be implemented. Notwithstanding, the benefits of improved effluent quality can be weakened by the negative effects on air quality, when energy consumption and related pollutants emissions deriving from the advanced treatment technologies are taken into account. It is the aim of this work to present an innovative methodology to judge the environmental compatibility of wastewater treatment processes on the basis of the damage on human health produced/avoided, expressed as an economic value. In particular, while for air pollution the established external costs were applied, for water pollution the rates of the impacts on human health have been evaluated in terms of Global Burden of Disease and measured in units of DALY (Disability-Adjusted Life Years), then converted into costs based on Gross Domestic Product. As a first application, this procedure was used for assessing environmental compatibility of a final ozonation: the results of this study showed that the reduction of water pollution achieved by means of ozonation might be beneficial for human health at an extent which is in the same order of magnitude of damage caused by air pollution, emphasizing that the question if the use of advanced (energy-intensive) treatments is a proper solution to remove organic micropollutants from wastewater remains still open.

EDCs, estrogenicity and genotoxicity reduction in a mixed (domestic + textile) secondary effluent by means of ozonation: a full-scale experience.

WWTP (wastewater treatment plant) effluents are considered to be a major source for the release in the aquatic environment of EDCs (Endocrine-Disrupting Compounds), a group of anthropogenic substances able to alter the normal function of the endocrine system. The application of conventional processes (e.g. activated sludge with biological nitrogen removal) does not provide complete elimination of all these micropollutants and, consequently, an advanced treatment should be implemented. This experimental work was conducted on the tertiary ozonation stage of a 140,000 p.e. activated sludge WWTP, treating a mixed domestic and textile wastewater: an integrated monitoring, including both chemical (nonylphenol, together with the parent compounds mono- and di-ethoxylated, and bisphenol A were chosen as model EDCs) and biological (estrogenic and genotoxic activities) analyses, was carried out. Removal efficiencies of measured EDCs varied from 20% to 70%, depending on flow conditions (ozone dosage being 0.5 gO3/gTOC). Biological tests, furthermore, displayed that the oxidation stage did not significantly reduce (only by 20%) the estrogenicity of the effluent and revealed the presence and/or formation of genotoxic compounds. These results highlight the importance of the application of an integrated (biological+chemical) analytical procedure for a global evaluation of treatment suitability; poor performances recorded in this study have been attributed to the presence of a significant industrial component in the influent wastewater.

'You've got m@il: fluoxetine coming soon!': accessibility and quality of a prescription drug sold on the web.

BACKGROUND: The increasing phenomenon of online pharmacies has potential for serious public health problems. This study aimed to evaluate the possibility of accessing a prescription drug in the absence of a prescription for an Italian purchaser. METHODS: Fluoxetine pills were ordered from several online pharmacies. The study included website analysis, and the quality of the received product including packaging, chemical and microbiological analyses. RESULTS: Orders could be placed correctly on 61 of the 98 selected websites, and a sales transaction was concluded successfully on 17 websites. Thirteen drug samples were eventually received. In one case it was necessary to fill in a questionnaire before ordering the drugs. All websites displayed aggressive marketing strategies. There was wide variation in terms of domain registration, company base (when declared) and manufacturer's location (mostly India). All pills were delivered in sealed blister packs showing the lot number and manufacturer's details. A leaflet was enclosed in one case only. In three cases we received more pills than ordered, and in one case Viagra pills as a free gift. Pharmacopoeia microbiological requirements were satisfied. Chemical analysis revealed that the active principle was always present, although many samples did not meet the Pharmacopoeia "other impurities" or "total impurities" criteria. Heavy metals and solvents regulated by the Pharmacopoeia did not exceed the set limits; some of the non-regulated ones were also assessed, in some cases with a positive result (e.g. styrene). CONCLUSION: About 20% of purchase attempts resulted in delivery of the drugs, even in the absence of a medical prescription. Traceability was poor and drug quality was generally worse compared to conventional pharmacy-purchased products. Based on all these broad-spectrum results, user safety appears not to be globally guaranteed.

Removal of endocrine disrupting compounds from wastewater treatment plant effluents by means of advanced oxidation.

Municipal sewage and WWTP effluents are considered to be a major source of pollution, regarding the occurrence of endocrine disrupting compounds (EDCs) in the environment. Although removal potential of many EDCs by conventional WWTPs is recognised, literature data are not easily comparable. Besides, in order to reach very low concentrations, a further treatment might be sometimes required. Positive results can be achieved by tertiary chemical oxidation; nevertheless, technical-economic suitability is still to be fully demonstrated. In this work, two estrogen-like susbstances were considered: nonylphenol (NP) (and its parent compounds) and bisphenol A (BPA). The experimental work was conducted at Verona (Northern Italy) WWTP (370,000 p.e.): after a 15 days sampling campaign, which was carried out in order to calculate mass balance of target compounds, chemical oxidation tests were performed on effluent by means of UV/H(2)O(2) process and ozonation. Technical-economic feasibility of these solutions is discussed.

Integration between chemical oxidation and membrane thermophilic biological process.

Full scale applications of activated sludge thermophilic aerobic process for treatment of liquid wastes are rare. This experimental work was carried out at a facility, where a thermophilic reactor (1,000 m(3) volume) is operated. In order to improve the global performance of the plant, it was decided to upgrade it, by means of two membrane filtration units (ultrafiltration -UF-, in place of the final sedimentation, and nanofiltration -NF-). Subsequently, the integration with chemical oxidation (O(3) and H(2)O(2)/UV processes) was taken into consideration. Studied solutions dealt with oxidation of both the NF effluents (permeate and concentrate). Based on experimental results and economic evaluation, an algorithm was proposed for defining limits of convenience of this process.

How to assess chemical oxidation efficiency.

In this work, a real wastewater (deriving from the chemical-pharmaceutical field) was treated by means of H2O2/UV process under different conditions in a pilot-scale plant. Several methods were used in order to assess the oxidation efficiency and to understand the main reaction features. It was shown that non-conventional COD measurement (with a 75 degrees C digestion of the sample) is helpful for understanding reaction mechanisms, when integrated with TOC and COD analyses and GC-MS determinations. For the biodegradability study, beside BOD (5 and 20 days) measurements, OUR and AUR tests provide additional information especially when wastewater is tested by taking the activated sludge from the treatment plant which should really be fed with it. Finally, dehydrogenase activity measurements can show the presence of complex organic matter, which may be degraded only by an acclimated biomass.

A comparison among different methods for evaluating the biomass activity in activated sludge systems: preliminary results.

In order to improve activated sludge plant operation (achieving higher efficiency and cost savings) beside influent and effluent characteristics and working parameters (e.g. dissolved oxygen, total and volatile suspended solids, pH, recirculation flow rate, etc.), the biomass activity should be monitored, the bacteria being responsible for the pollutant degradation. Since conventional cultivation based methods are inadequate to quantify environmental microorganisms (due to scarce number of cultivable microorganisms and time-consuming procedures) several "non-conventional" techniques were applied in this study, in order to compare the obtainable information and their routine feasibility. Different measurements (VSS concentration, Oxygen Uptake Rate, microbial counts by cultural and biomolecular methods--MPN-PCR, ATP content, dehydrogenase activity, microbial cell viability and enzymatic activity) were carried out on mixed liquor samples, taken from a municipal activated sludge plant (440,000 p. e.). The preliminary results of the research are presented in this paper.

The role of chemical oxidation in combined chemical-physical and biological processes: experiences of industrial wastewater treatment.

In this work, some experiences are described concerning the application of chemical oxidation in the treatment of industrial wastewaters in combination with other chemical-physical and/or biological processes. In the first case, two different wastewaters from saturated and unsaturated polyester resin production were considered. In a second case, optimal process conditions were assessed for the treatment of a wastewater deriving from polystyrene production. A third experience dealt with a comparison among different processes (flocculation, Fenton process, ozonisation, oxidation by means of ozone and hydrogen peroxide, oxidation by means of hydrogen peroxide and UV radiation), for the pretreatment of two industrial wastewaters (the first one being produced in a textile factory, the second one coming from detergent manufacturing). The evaluation of different processes was carried out by means of laboratory scale tests, considering treatment efficiency (organic substance removal, changes in wastewater biodegradability) and parameters (chemicals and energy consumption, sludge production) which play an important role in cost determination.