A critical review on the potential impacts of neonicotinoid insecticide use: current knowledge of environmental fate, toxicity, and implications for human health.

Neonicotinoid insecticides are widely used in both urban and agricultural settings around the world. Historically, neonicotinoid insecticides have been viewed as ideal replacements for more toxic compounds, like organophosphates, due in part to their perceived limited potential to affect the environment and human health. This critical review investigates the environmental fate and toxicity of neonicotinoids and their metabolites and the potential risks associated with exposure. Neonicotinoids are found to be ubiquitous in the environment, drinking water, and food, with low-level exposure commonly documented below acceptable daily intake standards. Available toxicological data from animal studies indicate possible genotoxicity, cytotoxicity, impaired immune function, and reduced growth and reproductive success at low concentrations, while limited data from ecological or cross-sectional epidemiological studies have identified acute and chronic health effects ranging from acute respiratory, cardiovascular, and neurological symptoms to oxidative genetic damage and birth defects. Due to the heavy use of neonicotinoids and potential for cumulative chronic exposure, these insecticides represent novel risks and necessitate further study to fully understand their risks to humans.

Differentiating Pseudomonas sp. strain ADP cells in suspensions and biofilms using Raman spectroscopy and scanning electron microscopy.

High quality spectra of Pseudomonas sp. strain ADP in the planktonic and biofilm state were obtained using Raman microspectroscopy. These spectra enabled the identification of key differences between free and biofilm cells in the fingerprint region of Raman spectra in the nucleic acid, carbohydrate, and protein regions. Scanning electron microscopy (SEM) enabled detailed visualization of ADP biofilm with confirmation of associated extracellular matrix structure. Following extraction and Raman analysis of extracellular polymeric substances, Raman spectral differences between free and biofilm cells were largely attributed to the contribution of extracellular matrix components produced in mature biofilms. Raman spectroscopy complemented with SEM proves to be useful in distinguishing physiological properties among cells of the same species. Graphical Abstract Raman spectroscopy complemented with SEM proves to be useful in distinguishing physiological properties among cells of the same species.

Solvent resistance pumps of Pseudomonas putida S12: Applications in 1-naphthol production and biocatalyst engineering.

The solvent resistance capacity of Pseudomonas putida S12 was applied by using the organism as a host for biocatalysis and through cloning and expressing solvent resistant pump genes into Escherichia coli. P. putida S12 expressing toluene ortho mononooxygenase (TOM-Green) was used for 1-naphthol production in a water-organic solvent biphasic system. Application of P. putida S12 improved 1-naphthol production per gram cell dry weight by approximately 42% compared to E. coli. Moreover, P. putida S12 enabled the use of a less expensive solvent, decanol, for 1-naphthol production. The solvent resistant pump (srpABC) genes of P. putida S12 were cloned into a solvent sensitive E. coli strain to transfer solvent tolerance. Recombinant strains bearing srpABC genes in either a low-copy number or a high-copy number plasmid grew in the presence of saturated concentration of toluene. Both of the recombinant strains were more tolerant to 1% v/v of toxic solvents, decanol and hexane, reaching similar cell density as the no-solvent control. Reverse-transcriptase analysis revealed that the srpABC genes were transcribed in engineered strains. The results demonstrate successful transfer of the proton-dependent solvent resistance mechanism and suggest that the engineered strain could serve as more robust biocatalysts in media with organic solvents.

Whole-cell biocatalysis for 1-naphthol production in liquid-liquid biphasic systems.

Whole-cell biocatalysis to oxidize naphthalene to 1-naphthol in liquid-liquid biphasic systems was performed. Escherichia coli expressing TOM-Green, a variant of toluene ortho-monooxygenase (TOM), was used for this oxidation. Three different solvents, dodecane, dioctyl phthalate, and lauryl acetate, were screened for biotransformations in biphasic media. Of the solvents tested, lauryl acetate gave the best results, producing 0.72 +/- 0.03 g/liter 1-naphthol with a productivity of 0.46 +/- 0.02 g/g (dry weight) cells after 48 h. The effects of the organic phase ratio and the naphthalene concentration in the organic phase were investigated. The highest 1-naphthol concentration (1.43 g/liter) and the highest 1-naphthol productivity (0.55 g/g [dry weight] cells) were achieved by optimization of the organic phase. The ability to recycle both free cells and cells immobilized in calcium alginate was tested. Both free and immobilized cells lost more than approximately 60% of their activity after the first run, which could be attributed to product toxicity. On a constant-volume basis, an eightfold improvement in 1-naphthol production was achieved using biphasic media compared to biotransformation in aqueous media.

Determining design and scale-up parameters for degradation of atrazine with suspended Pseudomonas sp. ADP in aqueous bioreactors.

This work investigated the kinetic parameters of atrazine mineralization by suspended cells of Pseudomonas sp. ADP in both shake flasks and spherical stirred tank batch reactors (SSTR). The degradation of atrazine and growth of Pseudomonas sp. ADP were studied. Experiments were performed at different temperatures and stirring speeds in both reactors at varying initial concentrations of atrazine. Cell growth and atrazine concentration were monitored over time, and a Monod model with one limiting substrate was used to characterize the kinetic behavior. Temperature, stirring speed, and reactor type were all found to significantly affect the regressed Monod parameters. At 27 degrees C and 200 rpm, for the shaker flask experiments, mu max and Ks were determined to be 0.14 (+/-0.01) h-1 and 1.88 (+/-1.80) mg/L, respectively. At 37 degrees C, mu max and Ks increased to 0.25 (+/-0.05) h-1 and 9.59 (+/-6.55) mg/L, respectively. As expected, stirrer speed was also found to significantly alter the kinetic parameters. At 27 degrees C and 125 rpm, mu max and Ks were 0.04 (+/-0.002) h-1 and 3.72 (+/-1.05) mg/L, respectively, whereas at 37 degrees C and 125 rpm, mu max and Ks were 0.07 (+/-0.008) h-1 and 1.65 (+/-2.06) mg/L. In the SSTR the kinetic parameters mu max and Ks at room temperature were determined to be 0.12 (+/-0.009) h-1 and 2.18 (+/-0.47) mg/L, respectively. Although the mu max values for both types of reactors were similar, the shaker flask experiments resulted in considerable error. Error analysis on calculated values of Ks were found to impact estimates in atrazine concentration by as much as two orders of magnitude, depending on the reactor design, illustrating the importance of these factors in reactor scale-up.

Microbial oxidation of naphthalene to cis-1,2-naphthalene dihydrodiol using naphthalene dioxygenase in biphasic media.

The selective oxidation of aryl substrates to chiral cis-1,2-dihydrodiols is an industrially important reaction for the production of intermediates that can be used to produce fine chemicals, pharmaceuticals, and many other bioactive natural products. More specifically, the oxidation of naphthalene to produce optically pure (+)-cis-(1R,2S)-1,2-napthalene dihydrodiol (NDHD) to be used as a chiral synthon for specialty chemicals has gained much interest. Escherichia coli JM109(DE3) pDTG141 expresses naphthalene dioxygenase which catalyzes this reaction. Poor substrate solubility and substrate toxicity are barriers to using the power of these enzymes in large-scale aqueous whole cell systems. A biphasic reaction system was chosen to overcome these barriers. The optimal biphasic conditions for E. coli JM109(DE3) pDTG141 were determined to be 20% dodecane as the organic solvent containing 40 g/L naphthalene. The productivity of the biotransformation using resting cells was 1.75 g-diol/g-cdw/h for the first 6 h with 20% organic phase, which was increased from 0.59 g-diol/g-cdw/h for growing cells with 40% organic phase. The biocatalytic activity was retained for at least 12 h. The biocatalyst could be recycled for at least four runs in both suspended and immobilized form. The stability of the 12 h recycle was improved by immobilization in calcium alginate beads. The process has been improved both environmentally and economically by reducing the amount of solvent used and by recycling the biocatalyst.

Amyloglucosidase enzymatic reactivity inside lipid vesicles.

Efficient functioning of enzymes inside liposomes would open new avenues for applications in biocatalysis and bioanalytical tools. In this study, the entrapment of amyloglucosidase (AMG) (EC 3.2.1.3) from Aspergillus niger into dipalmitoylphosphatidylcholine (DPPC) multilamellar vesicles (MLVs) and large unilamellar vesicles (LUVs) was investigated. Negative-stain, freeze-fracture, and cryo-transmission electron microscopy images verified vesicle formation in the presence of AMG. Vesicles with entrapped AMG were isolated from the solution by centrifugation, and vesicle lamellarity was identified using fluorescence laser confocal microscopy. The kinetics of starch hydrolysis by AMG was modeled for two different systems, free enzyme in aqueous solution and entrapped enzyme within vesicles in aqueous suspension. For the free enzyme system, intrinsic kinetics were described by a Michaelis-Menten kinetic model with product inhibition. The kinetic constants, Vmax and Km, were determined by initial velocity measurements, and Ki was obtained by fitting the model to experimental data of glucose concentration-time curves. Predicted concentration-time curves using these kinetic constants were in good agreement with experimental measurements. In the case of the vesicles, the time-dependence of product (glucose) formation was experimentally determined and simulated by considering the kinetic behavior of the enzyme and the permeation of substrate into the vesicle. Experimental results demonstrated that entrapped enzymes were much more stable than free enyzme. The entrapped enzyme could be recycled with retention of 60% activity after 3 cycles. These methodologies can be useful in evaluating other liposomal catalysis operations.

Screening extremophiles for bioconversion potentials.

A screening protocol was developed and implemented to evaluate extremophiles, in particular hyperthermophiles and thermoacidophiles, for their capacity to transform starch-based feedstocks to high-value organic acids and solvents. Screening results of 14 extremophiles showed promising growth and biotransformation potentials. In particular, Hyperthermus butylicus, Thermococcus litoralis, and Sulfolobus acidocaldarius were identified as producers of both organic acids and solvents under the screening protocol. The screening effort presented here represents an important step toward realization of biotransformation potentials of extremophiles, potentially improving upon biomass-based processes.

Purification of hyperthermophilic archaeal amylolytic enzyme (MJA1) using thermoseparating aqueous two-phase systems.

Purification of a recombinant, thermostable alpha-amylase (MJA1) from the hyperthermophile, Methanococcus jannaschii, was investigated in the ethylene oxide-propylene oxide random copolymer (PEO-PPO)/(NH(4))(2)SO(4), and poly(ethylene glycol) (PEG)/(NH(4))(2)SO(4) aqueous two-phase systems. MJA1 partitioned in the top polymer-rich phase, while the remainder of proteins partitioned in the bottom salt-rich phase. It was found that enzyme recovery of up to 90% with a purification factor of 3.31 was achieved using a single aqueous two-phase extraction step. In addition, the partition behavior of pure amyloglucosidase in polymer/salt aqueous two-phase systems was also evaluated. All of the studied enzymes partitioned unevenly in these polymer/salt systems. This work is the first reported application of thermoseparating polymer aqueous two-phase systems for the purification of extremophile enzymes.

Archaeal tetraether lipids: unique structures and applications.

The extremely stable biomolecules manufactured by organisms from extreme environments are of great scientific and engineering interest in the development of robust and stable industrial biocatalysts. Identification of molecules that impart stability under extremes will also have a profound impact on our understanding of cellular survival. This review discusses isolation and characterization of archaeal tetraethers as well as target technologies for tetraether lipid application. The isolation and characterization of archaeal tetraether lipids has led to some interesting applications improving on ester lipid technologies. Potential applications include novel lubricants, gene-delivery systems, monolayer lipid matrices for sensor devices, and protein stabilization. Following this review, patent abstracts and additional literature pertaining to the isolation, characterization, and application of archaeal membrane lipids are listed.

Amylase partitioning and extractive bioconversion of starch using thermoseparating aqueous two-phase systems.

The effectiveness of thermoseparating polymer-based aqueous two-phase systems (ATPS) in the enzymatic hydrolysis of starch was investigated. In this work, the phase diagrams of PEO-PPO-2500/ammonium sulfate and PEO-PPO-2500/magnesium sulfate systems were determined at 25 degrees C. The partition behavior of pure alpha-amylase and amyloglucosidase in four ATPS, namely, PEO-PPO/(NH(4))(2)SO(4), PEO-PPO/MgSO(4), polyethylene glycol (PEG)/(NH(4))(2)SO(4), and PEG/MgSO(4), was evaluated. The effects of phase-forming component concentrations on the enzyme activity and partitioning were assessed. Partitioning of a recombinant, thermostable alpha-amylase (MJA1) from the hyperthermophile, Methanococcus jannaschii was also investigated. All of the studied enzymes partitioned unevenly in these polymer/salt systems. The PEO-PPO-2500/MgSO(4) system was extremely attractive for starch hydrolysis. Polymer-based starch hydrolysis experiments containing PEO-PPO-2500/MgSO(4) indicated that the use of ATPS had a significant effect on soluble starch hydrolysis. Batch starch hydrolysis experiments with PEO-PPO/salt two-phase systems resulted in higher production of maltose or glucose and exhibited remarkably faster hydrolysis. A 22% gain in maltose yield was obtained as a result of the increased productivity. This work is the first reported application of thermoseparating polymer ATPS in the processing of starches. These results reveal the potential for thermoseparating polymer-enhanced extractive bioconversion of starch as a practical technology.

Role of multiple gene copies in particulate methane monooxygenase activity in the methane-oxidizing bacterium Methylococcus capsulatus Bath.

Genes for the subunits of particulate methane monooxygenase, PmoABC, have been sequenced from the gamma-proteobacterial methanotroph Methylococcus capsulatus Bath. M. capsulatus Bath contains two complete copies of pmoCAB, as well as a third copy of pmoC. The two pmoCAB regions were almost identical at the nucleotide sequence level, differing in only 13 positions in 3183 bp. At the amino acid level, each translated gene product contained only one differing residue in each copy. However, the pmoC3 sequence was more divergent from the two other pmoC copies at both the far N-terminus and far C-terminus. Chromosomal insertion mutations were generated in all seven genes. Null mutants could not be obtained for pmoC3, suggesting that it may play an essential role in growth on methane. Null mutants were obtained for pmoC1, pmoC2, pmoA1, pmoA2, pmoB1 and pmoB2. All of these mutants grew on methane, demonstrating that both gene copies were functional. Copy 1 mutants showed about two-thirds of the wild-type whole-cell methane oxidation rate, while copy 2 mutants showed only about one-third of the wild-type rate, indicating that both gene copies were necessary for wild-type particulate methane monooxygenase activity. It was not possible to obtain double null mutants that were defective in both pmo copies, which may indicate that some expression of pMMO is important for growth.