Xenogeneic matrix for basal cell carcinoma reconstruction: a case report.

This case report introduces an innovative approach for tissue regeneration post-total excision of basal cell carcinoma utilizing a xenogeneic collagen matrix coupled with injectable platelet-rich fibrin. The clinical outcome underscores the efficacy and predictability of this protocol in soft tissue regeneration. While further investigation on a larger patient cohort is warranted to fully elucidate its effects and advantages, this technique holds promise in streamlining surgical procedures following excision of extraoral neoplasms. Notably, its simple handling, minimal resource requirements, and potential to mitigate donor site morbidity and patient comorbidities post-surgery signify its value in clinical practice.

GM-CSF-dependent CD301b+ lung dendritic cells confer tolerance to inhaled allergens.

The severity of allergic asthma is driven by the balance between allergen-specific T regulatory (Treg) and T helper (Th)2 cells. However, it is unclear whether specific subsets of conventional dendritic cells (cDCs) promote the differentiation of these two T cell lineaeges. We have identified a subset of lung resident type 2 cDCs (cDC2s) that display high levels of CD301b and have potent Treg-inducing activity ex vivo. Single cell RNA sequencing and adoptive transfer experiments show that during allergic sensitization, many CD301b+ cDC2s transition in a stepwise manner to CD200+ cDC2s that selectively promote Th2 differentiation. GM-CSF augments the development and maintenance of CD301b+ cDC2s in vivo, and also selectively expands Treg-inducing CD301b+ cDC2s derived from bone marrow. Upon their adoptive transfer to recipient mice, lung-derived CD301b+ cDC2s confer immunological tolerance to inhaled allergens. Thus, GM-CSF maintains lung homeostasis by increasing numbers of Treg-inducing CD301b+ cDC2s.

Cytotoxic impact of nicotine products on periodontal ligament cells.

OBJECTIVES: The primary objective of this in vitro experiment was an assessment of proliferative capacity, metabolic activity, and potential cellular detriment of human periodontal ligament cells (hPDL) exposed to cigarette smoke (CS), electronic cigarette vapor (eCV), and heated tobacco product aerosol (HTP), or air (control). MATERIALS AND METHODS: Using a CAD/CAM-designed exposition chamber, hPDL were exposed to CS, eCV, HTP, or air (control) based on the Health Canada Intense Smoking Regime. Cell proliferation, metabolic activity, and cellular detriment were assessed at various time points. RESULTS: Compared to the control, hPDL exposed to CS exhibited significantly decreased cell numbers at all time points. HTP exposure led to reduced cell numbers 48 h and 72 h post-exposure, while eCV-exposed cells showed no significant decrease. The metabolic activity of eCV-treated hPDL was slightly reduced at 7 h but recovered at 24 h and 48 h. In contrast, CS-treated cells exhibited significantly decreased metabolic activity at 24 h and 48 h, and HTP-exposed cells showed a significant decrease after 48 h. Flow cytometry indicated both apoptotic and necrotic cell death following CS exposure, with necrotic cell death being more pronounced. CONCLUSIONS: eCV and HTP demonstrated comparatively reduced detrimental effects on hPDL compared to CS. CLINICAL RELEVANCE: The findings suggest that conventional cigarette smoke poses a substantial risk to periodontal health by significantly impairing cell proliferation and metabolic activity. However, alternatives such as eCV and HTP may offer a comparatively reduced risk.

A comparative analysis of particulate bovine bone substitutes for oral regeneration: a narrative review.

PURPOSE: Particulate bovine bone substitutes (BS) are commonly used in oral regeneration. However, more literature is needed focusing on comparative analyses among various particulate bovine BS. This study evaluates pre-clinical and clinical data of different particulate bovine BS in oral regeneration. METHODS: A narrative review was conducted by screening the PubMed database Included in the review were pre-clinical and clinical studies until 2024 comparing a minimum of two distinct particulate bovine BS. In addition to examining general data concerning manufacturing and treatment processes, biological safety, physical and chemical characteristics, and graft resorption, particular emphasis was placed on assessing pre-clinical and clinical data related to ridge preservation, sinus floor elevation, peri-implant defects, and various forms of alveolar ridge augmentation utilizing particulate bovine BS. RESULTS: Various treatment temperatures ranging from 300 to 1,250 °C and the employment of chemical cleaning steps were identified for the manufacturing process of particulate bovine BS deemed to possess biosecurity. A notable heterogeneity was observed in the physical and chemical characteristics of particulate bovine BS, with minimal or negligible graft resorption. Variations were evident in particle and pore sizes and the porosity of particulate bovine BS. Pre-clinical assessments noted a marginal inclination towards favorable outcomes for particulate bovine BS subjected to higher treatment temperatures. However, clinical data are insufficient. No distinctions were observed regarding ridge preservation, while slight advantages were noted for high-temperature treated particulate bovine BS in sinus floor elevation. CONCLUSIONS: Subtle variances in both pre-clinical and clinical outcomes were observed in across various particulate bovine BS. Due to inadequate data, numerous considerations related to diverse particulate bovine BS, including peri-implant defects, must be more conclusive. Additional clinical studies are imperative to address these knowledge gaps effectively.

Improving material properties of a poloxamer P407 hydrogel-based hydroxyapatite bone substitute material by adding silica-A comparative in vivo study.

The structure and handling properties of a P407 hydrogel-based bone substitute material (BSM) might be affected by different poloxamer P407 and silicon dioxide (SiO2) concentrations. The study aimed to compare the mechanical properties and biological parameters (bone remodeling, BSM degradation) of a hydroxyapatite: silica (HA)-based BSM with various P407 hydrogels in vitro and in an in vivo rat model. Rheological analyses for mechanical properties were performed on one BSM with an SiO2-enriched hydrogel (SPH25) as well on two BSMs with unaltered hydrogels in different gel concentrations (PH25 and PH30). Furthermore, the solubility of all BSMs were tested. In addition, 30 male Wistar rats underwent surgical creation of a well-defined bone defect in the tibia. Defects were filled randomly with PH30 (n = 15) or SPH25 (n = 15). Animals were sacrificed after 12 (n = 5 each), 21 (n = 5 each), and 63 days (n = 5 each). Histological evaluation and histomorphometrical quantification of new bone formation (NB;%), residual BSM (rBSM;%), and soft tissue (ST;%) was conducted. Rheological tests showed an increased viscosity and lower solubility of SPH when compared with the other hydrogels. Histomorphometric analyses in cancellous bone showed a decrease of ST in PH30 (p = .003) and an increase of NB (PH30: p = .001; SPH: p = .014) over time. A comparison of both BSMs revealed no significant differences. The addition of SiO2 to a P407 hydrogel-based hydroxyapatite BSM improves its mechanical stability (viscosity, solubility) while showing similar in vivo healing properties compared to PH30. Additionally, the SiO2-enrichment allows a reduction of poloxamer ratio in the hydrogel without impairing the material properties.

Flotillin-2 dampens T cell antigen-sensitivity and functionality.

T cell receptor (TCR) engagement triggers T cell responses, yet how TCR-mediated activation is regulated at the plasma membrane remains unclear. Here, we report that deleting the membrane scaffolding protein Flotillin-2 (Flot2) increases T cell antigen sensitivity, resulting in enhanced TCR signaling and effector function to weak TCR stimulation. T cell-specific Flot2-deficient mice exhibited reduced tumor growth and enhanced immunity to infection. Flot2-null CD4 + T cells exhibited increased T helper 1 polarization, proliferation, Nur77 induction, and phosphorylation of ZAP70 and LCK upon weak TCR stimulation, indicating a sensitized TCR-triggering threshold. Single cell-RNA sequencing suggested that Flot2 - null CD4 + T cells follow a similar route of activation as wild-type CD4 + T cells but exhibit higher occupancy of a discrete activation state under weak TCR stimulation. Given prior reports that TCR clustering influences sensitivity of T cells to stimuli, we evaluated TCR distribution with super-resolution microscopy. Flot2 ablation increased the number of surface TCR nanoclusters on naïve CD4 + T cells. Collectively, we posit that Flot2 modulates T cell functionality to weak TCR stimulation, at least in part, by regulating surface TCR clustering. Our findings have implications for improving T cell reactivity in diseases with poor antigenicity, such as cancer and chronic infections.

Towards optimized tissue regeneration: a new 3D printable bioink of alginate/cellulose hydrogel loaded with thrombocyte concentrate.

Introduction: Autologous platelet concentrate (APC) are pro-angiogenic and can promote wound healing and tissue repair, also in combination with other biomaterials. However, challenging defect situations remain demanding. 3D bioprinting of an APC based bioink encapsulated in a hydrogel could overcome this limitation with enhanced physio-mechanical interface, growth factor retention/secretion and defect-personalized shape to ultimately enhance regeneration. Methods: This study used extrusion-based bioprinting to create a novel bioink of alginate/cellulose hydrogel loaded with thrombocyte concentrate. Chemico-physical testing exhibited an amorphous structure characterized by high shape fidelity. Cytotoxicity assay and incubation of human osteogenic sarcoma cells (SaOs2) exposed excellent biocompatibility. enzyme-linked immunosorbent assay analysis confirmed pro-angiogenic growth factor release of the printed constructs, and co-incubation with HUVECS displayed proper cell viability and proliferation. Chorioallantoic membrane (CAM) assay explored the pro-angiogenic potential of the prints in vivo. Detailed proteome and secretome analysis revealed a substantial amount and homologous presence of pro-angiogenic proteins in the 3D construct. Results: This study demonstrated a 3D bioprinting approach to fabricate a novel bioink of alginate/cellulose hydrogel loaded with thrombocyte concentrate with high shape fidelity, biocompatibility, and substantial pro-angiogenic properties. Conclusion: This approach may be suitable for challenging physiological and anatomical defect situations when translated into clinical use.

Clinical insights into traumatic injury of the inferior alveolar and lingual nerves: a comprehensive approach from diagnosis to therapeutic interventions.

OBJECTIVES: This scoping review explores the risk and management of traumatic injuries to the inferior alveolar and lingual nerves during mandibular dental procedures. Emphasizing the significance of diagnostic tools, the review amalgamates existing knowledge to offer a comprehensive overview. MATERIALS AND METHODS: A literature search across PubMed, Embase, and Cochrane Library informed the analysis. RESULTS: Traumatic injuries often lead to hypo-/anesthesia and neuropathic pain, impacting individuals psychologically and socially. Diagnosis involves thorough anamnesis, clinical-neurological evaluations, and radiographic imaging. Severity varies, allowing for conservative or surgical interventions. Immediate action is recommended for reversible causes, while surgical therapies like decompression, readaptation, or reconstruction yield favorable outcomes. Conservative management, utilizing topical anesthesia, capsaicin, and systemic medications (tricyclic antidepressants, antipsychotics, and serotonin-norepinephrine-reuptake-inhibitors), proves effective for neuropathic pain. CONCLUSIONS: Traumatic nerve injuries, though common in dental surgery, often go unrecorded. Despite lacking a definitive diagnostic gold standard, a meticulous examination of the injury and subsequent impairments is crucial. CLINICAL RELEVANCE: Tailoring treatment to each case's characteristics is essential, recognizing the absence of a universal solution. This approach aims to optimize outcomes, restore functionality, and improve the quality of life for affected individuals.

Interdisciplinary all-on-four® concept for mandibular jaw in dental education - do students benefit from individual 3d printed models from real patient cases?

PURPOSE: Digitalization is assuming increasing significance in dental education, as dental students are increasingly exposed to digital implant planning and contemporary technologies such as 3D printing. In this study, we present a cohort analysis aimed at assessing the potential benefits derived from the utilization of 3D prints to seamlessly translate planned procedures into real-life applications. METHODS: 21 dental students participated in a virtual planning and hands-on course across two cohorts (C1: n = 10, C2: n = 11). The virtual implant planning phase involved the placement of four implants on an atrophic lower jaw model. Subsequently, Cohort 1 (C1) executed the implantation procedure on a prefabricated hands-on model, while Cohort 2 (C2) engaged with 3D prints representing their individual implant planning during the hands-on session. Subjective assessments of knowledge, skills, and the perceived utility of 3D prints were conducted through pre- and post-course questionnaires, utilizing a 5-point scale. RESULTS: In the subjective evaluation, 17 out of 21 participants expressed a positive appraisal of the use of personalized models. Notably, there was no statistically significant improvement in overall knowledge scores; however, there was a discernible increase of 0.5 points in the ratings related to perceived expertise and procedural abilities. CONCLUSION: While there was a notable increase in the subjective ratings of knowledge and abilities, no statistically significant difference was observed between the two groups. The consensus among dental students is that individually planned and printed implant models serve as a valuable and effective tool in hands-on courses.

The Perfect Timing-Immediate versus Delayed Microvascular Reconstruction of the Mandible.

In this retrospective study, the clinical and economic implications of microvascular reconstruction of the mandible were assessed, comparing immediate versus delayed surgical approaches. Utilizing data from two German university departments for oral and maxillofacial surgery, the study included patients who underwent mandibular reconstruction following continuity resection. The data assessed included demographic information, reconstruction details, medical history, dental rehabilitation status, and flap survival rates. In total, 177 cases (131 male and 46 females; mean age: 59 years) of bony free flap reconstruction (72 immediate and 105 delayed) were included. Most patients received adjuvant treatment (81% with radiotherapy and 51% combined radiochemotherapy), primarily for tumor resection. Flap survival was not significantly influenced by the timing of reconstruction, radiotherapy status, or the mean interval (14.5 months) between resection and reconstruction. However, immediate reconstruction had consumed significantly fewer resources. The rate of implant-supported masticatory rehabilitation was only 18% overall. This study suggests that immediate jaw reconstruction is economically advantageous without impacting flap survival rates. It emphasizes patient welfare as paramount over financial aspects in clinical decisions. Furthermore, this study highlights the need for improved pathways for masticatory rehabilitation, as evidenced by only 18% of patients with implant-supported dentures, to enhance quality of life and social integration.

DIGITAL DENTISTRY AND ITS IMPACT ON ORAL HEALTH-RELATED QUALITY OF LIFE.

Over the past 50 years, digitization has gradually taken root in dentistry, starting with computer tomography in the 1970s. The most disruptive events in digital dentistry were the introduction of digital workflow and computer-aided manufacturing, which made new procedures and materials available for dental use. While the conventional lab-based workflow requires light or chemical curing under inconsistent and suboptimal conditions, computer-aided manufacturing allows for industrial-grade material, ensuring consistently high material quality. In addition, many other innovative, less disruptive, but relevant approaches have been developed in digital dentistry. These will have or already impact prevention, diagnosis, and therapy, thus impacting patients' oral health and, consequently, their oral health-related quality of life. Both software and hardware approaches attempt to maintain, restore, or optimize a patient's perceived oral health. This article outlines innovations in dentistry and their potential impact on patients' oral health-related quality of life in prevention and therapy. Furthermore, possible future developments and their potential implications are characterized.

Variability of the Cervical Branch Depending on the Facial Nerve Branching Pattern and Anthropometric Type of the Head.

(1) Background: Considering that the specialty literature supplies only general data about the variability of the cervical branch of the facial nerve, this study aimed to determine this branch's variation and individual peculiarities depending on the nerve branching pattern and anthropometric type of the head. (2) Methods: The study was conducted on 75 hemifaces of adult formalized cadavers. Ahead of anatomical dissection, each head was measured to establish the anthropometric type, according to Franco and colleagues. The branching patterns were then distributed according to the Davis classification. (3) Results: The number of cervical branches (CB) of the facial nerve varied from one to five branches, with the following rate: 1 CB (61.3%), 2 CB (28%), 3 CB (6.7%), 4 CB (2.7%), and 5 CB (1.3%). Seven branching patterns of the facial nerve were revealed: Type I in 18.7%, Type II in 14.7%, Type III in 20%, Type IV in 14.6%, Type V in 5.3%, Type VI in 18.7%, and Type NI in 8% (bizarre types). According to the branching pattern, the mean numbers of the cervical branches were as follows: Type I-1.6 ± 1.02; Type II-1.4 ± 0.50; Type III-1.4 ± 0.50; Type IV-1.4 ± 0.67; Type V-2.0 ± 1.41; Type VI-1.8 ± 1.12; and Type-NI-1.8 ± 0.75; p = 0.599. According to the anthropometric type of the head, the mean number of CB in the mesocephalic type (MCT) was 1.5 ± 0.82, in the dolichocephalic type (DCT), 1.7 ± 0.87, and in the brachycephalic type, (BCT) 1.8 ± 1.04; p = 0.668. (4) Conclusions: The cervical branch of the facial nerve varies depending on the facial nerve branching pattern and the anthropometric type of the head. The highest degree of variation was characteristic of BCT and Type V and the lowest, of MCT and Types II, III, and IV.

Platelet-rich fibrin for rehydration and pre-vascularization of an acellular, collagen membrane of porcine origin.

OBJECTIVES: Pre-vascularization of the collagen membranes with autologous platelet concentrates is a standard procedure in oral and maxillofacial surgery. This study analyzed the possible interaction of an acellular collagen membrane of porcine origin (NM) with platelet-rich fibrin (PRF) regarding its rehydration protocol with differences in pH values and effect on angiogenesis. MATERIALS AND METHODS: NM was analyzed alone and combined with solid PRF by plotting or co-culturing with injectable PRF. Different media (venous blood, buffer solution with a fixed pH value of 7, saline solution, and injectable PRF) were used to analyze the influence on pH value during rehydration. Chorion allantois membrane assay (CAM) was applied to check pro-angiogenic effects after 24, 48, and 72 h, followed by immunohistochemical analysis. RESULTS: Rehydration in injectable PRF showed acidity over time (p < 0.05). A definite pro-angiogenic effect of NM alone was found regarding neo-vessel formation supported by the respective light microscopically analysis without significant differences to PRF alone (p > 0.005). This pro-angiogenic effect could not be exaggerated when NM was combined with liquid/solid PRF (each p > 0.005). CONCLUSIONS: Rehydration with liquid PRF of the collagen membrane results in acidity compared to a saline solution or patient's blood. The significant pro-angiogenic potential of the membrane alone resulted in enhanced neo-vessel formation that could not be optimized with the addition of PRF. CLINICAL RELEVANCE STATEMENT: Using injectable PRF for rehydration protocol of the collagen membrane leads to acidosis that can ultimately optimize wound healing. Differences in the physio-mechanical interplay of collagen matrices and autologous platelet concentrates must result in clinical algorithms if pre-vascularization can maximize outcomes.

Comparison of morbidity-related parameters between autologous and allogeneic bone grafts for alveolar ridge augmentation from patients' perspective-A questionnaire-based cohort study.

INTRODUCTION: Alveolar ridge augmentation is often required before dental implant placement. In this context, autologous bone grafts are considered the biological gold standard. Still, bone block harvesting is accompanied by some serious potential disadvantages and possible complications, such as pain, bleeding, and nerve irritation. Several studies aimed to compare autologous to allogeneic bone grafts concerning bone quality and implant survival rates; this is the first prospective study analyzing and comparing morbidity-related parameters after alveolar ridge augmentation using autogenous and allogeneic bone blocks from patients' perspective. METHODS: Using a questionnaire, 36 patients were asked to evaluate the surgery as well as the post-operative period concerning pain, stress, sensibility deficits, satisfaction with, and consequences from the surgery as well as the preferred procedure for future alveolar ridge augmentations. RESULTS: No significant differences were shown regarding stress and pain during and after surgery, whereas the rate of nerve irritations was twice as high in the autologous group. The swelling was significantly higher in patients with autologous bone blocks (p = 0.001). Nevertheless, the overall satisfaction of patients of both groups was very high, with over 8/10 points. CONCLUSIONS: The swelling was the main reason for patients' discomfort in both groups and was significantly higher after autologous bone augmentation. Since this side effect seems to be a highly relevant factor for patients' comfort and satisfaction, it needs to be discussed during preoperative consultation to allow shared decision-making considering the anticipated morbidity.

Allogeneic versus autogenous shell technique augmentation procedures: a prospective-observational clinical trial comparing surgical time and complication rates.

OBJECTIVES: Autogenous and allogeneic blocks for shell augmentation of the jaw have shown comparable results. This observational clinical study aimed to compare both materials for shell augmentation concerning surgery time and intra- and postoperative complications. MATERIAL AND METHODS: Bone augmentation with the shell technique using autogenous or allogenous bone was performed in 117 patients with segmental jaw atrophy. The primary study parameter was the surgical time, comparing both materials. Subsequently, intra- and postoperative complications were recorded. RESULTS: Allogeneic (n = 60), autogenous (n = 52), or both materials (n = 5) were used. The use of allogeneic material led to a significantly shorter operation time (p < 0.001). A more experienced surgeon needed significantly less time than a less experienced surgeon (p < 0.001). An increasing number of bone shells (p < 0.001), an additional sinus floor elevation, and intraoperative complications also significantly increased the operation time (p = 0.001). Combining allogeneic and autogenous shells (p = 0.02) and simultaneous sinus floor elevation (p = 0.043) significantly impacted intraoperative complications. No correlations were found between the included variables for postoperative complications (all p > 0.05). In total, 229 implants were inserted after a healing time of 4-6 months, with a survival of 99.6% after a mean follow-up duration of 9 months. CONCLUSIONS: Compared to the autogenous technique, allogeneic shell augmentation has a shorter surgical time and a similar rate of intra- and postoperative complications as autogenous bone. Together with its promising clinical results, this technique can be recommended.

Intraoral Microvascular Anastomosis in Immediate Free Flap Reconstruction for Midfacial Tumor Defects: A Retrospective Multicenter Study.

(1) Background: The current landscape of midface reconstruction is marked by ongoing evolution, with notable advancements in surgical techniques, microvascular procedures, and the implementation of multidisciplinary approaches, all of which have significantly enhanced both functional and aesthetic outcomes. Conventionally, microvascular anastomoses for free flaps in midfacial reconstruction have been executed using cervical vessels. However, this approach necessitates neck access, resulting in extraoral scars and a substantial pedicle length. In light of these considerations, using intraoral anastomoses via the facial vessels emerges as a promising alternative. This retrospective multicentric study aims to provide a comprehensive account of immediate midface reconstruction through intraoral anastomoses. (2) Methods: Between 2020 and 2023, patients were included who underwent intraoral resection of midface/orbit segments (Brown Classes I-VI) as a result of malignant diseases. In all cases, immediate reconstruction was accomplished by utilizing the facial vessels through an intraoral approach. Outcome criteria were identification of vessels, parotid duct or facial nerve damage, success of vascular anastomoses, and flap survival. (3) Results: A total of 117 patients with 132 flaps (91 osseous and 41 cutaneous) were included. The intraoral preparation of facial vessels was successfully completed in less than 1 h, and no complications related to the dissection or anastomoses were observed. In two cases, the vessel diameter was insufficient to facilitate anastomoses, necessitating adopting an extraoral approach. During a follow-up period of 48 months, two osseous flaps were lost, accounting for a 1.5% loss rate out of 132 flaps used. Additionally, 3 flaps experienced partial loss, including a skin island of a scapula, the border zone of a femur, and a rectus flap, resulting in a 2.3% partial loss rate out of 130 flaps utilized. (4) Conclusions: This case series underscores the feasibility of employing intraoral anastomoses for immediate complex midface reconstruction following oncological resection. This approach is particularly advantageous for flaps with shorter pedicles, as it helps mitigate external scarring and minimizes the risk of facial nerve injury.

Platelet-rich fibrin ensures hemostasis after single-tooth removal under factor Xa inhibitors - a clinical prospective randomized split-mouth study.

OBJECTIVES: In this prospective, double-blinded, randomized split-mouth study, the local hemostatic effect of platelet-rich fibrin (PRF) inserted into the extraction socket in patients taking factor Xa (FXa) inhibitors (apixaban, rivaroxaban, edoxaban) was compared to a hemostatic gelatine sponge (GS) as the "therapeutic gold standard" without withdrawal of oral anticoagulant therapy. MATERIALS AND METHODS: Single-tooth extraction was conducted under local anesthesia in n = 21 patients using a split-mouth design (42 teeth). Using a double-blind approach, the extraction socket on one side of the jaw was filled with PRF and on the other with a GS. Bleeding was assessed immediately after surgery, in 30 min, 1 h, 1.5 h, and on follow-up appointments in 24 h and on the 7th day. RESULTS: In 67% of cases, mild postoperative oozing could be stopped 30-90 min after tooth extraction via gauze pressure without any delayed bleeding. Concerning bleeding events, there was no difference among the PRF and GS groups and no significant difference among rivaroxaban, apixaban, and edoxaban (all p > 0.15). CONCLUSION: PRF and GS are reliable hemostatic methods in postextraction sockets of patients taking FXa inhibitors. CLINICAL RELEVANCE: Consequently, there is no need to discontinue FXa inhibitors because of a single-tooth removal, eliminating the risk of thrombus formation.

First Clinical Case Report of a Xenograft-Allograft Combination for Alveolar Ridge Augmentation Using a Bovine Bone Substitute Material with Hyaluronate (Cerabone® Plus) Combined with Allogeneic Bone Granules (Maxgraft®).

BACKGROUND: A patient had lost the first left maxillary incisor in the esthetic zone. METHODS: The defect in the alveolar ridge was reconstructed for an implant-supported restoration using a new xenogeneic bone substitute containing hyaluronate, which was used in combination with allogeneic bone granules. RESULTS: After three years of follow-up, the dental implant was stable and showed no signs of infection. CONCLUSIONS: This is the first case report with a long-term follow-up time of three years of a successful clinical application of a xenograft-allograft combination (cerabone® plus combined with maxgraft®) for alveolar ridge augmentation before dental implantation. Cerabone® plus offers volume stability, provides reliable and efficient structural support of the oral soft tissues in the augmented region (particularly crucial in the aesthetic zone), and preserves the alveolar ridge shape.

The Impact of Transfer-Related Ischemia on Free Flap Metabolism and Electrolyte Homeostasis-A New In Vivo Experimental Approach in Pigs.

Free flap tissue transfer represents the gold standard for extensive defect reconstruction, although malperfusion due to thrombosis remains the leading risk factor for flap failure. Recent studies indicate an increased immune response and platelet activation in connection with pathologic coagulation. The underlying cellular and molecular mechanisms remain poorly understood, however. The presented study, therefore, aims to investigate if transfer-related ischemia alters intra-flap metabolism and electrolyte concentrations compared to central venous blood after free flap transfer in pigs to establish a novel experimental model. Free transfer of a myocutaneous gracilis flap to the axillary region was conducted in five juvenile male pigs. The flap artery was anastomosed to the axillary artery, and intra-flap venous blood was drained and transfused using a rubber-elastic fixed intravenous catheter. Blood gas analysis was performed to assess the effect of transfer time-induced ischemia on intra-flap electrolyte levels, acid-base balance, and hemoglobin concentrations compared to central venous blood. Time to flap reperfusion was 52 ± 10 min on average, resulting in a continuous pH drop (acidosis) in the flaps' venous blood compared to the central venous system (p = 0.037). Potassium (p = 0.016), sodium (p = 0.003), and chloride (p = 0.007) concentrations were significantly increased, whereas bicarbonate (p = 0.016) and calcium (p = 0.008) significantly decreased within the flap. These observations demonstrate the induction of anaerobic glycolysis and electrolyte displacement resulting in acidosis and hence significant tissue damage already after a short ischemic period, thereby validating the novel animal model for investigating intra-flap metabolism and offering opportunities for exploring various (immuno-) thrombo-hemostatic issues in transplantation surgery.

ITI consensus report on zygomatic implants: indications, evaluation of surgical techniques and long-term treatment outcomes.

OBJECTIVES: The aim of the ITI Consensus Workshop on zygomatic implants was to provide Consensus Statements and Clinical Recommendations for the use of zygomatic implants. MATERIALS AND METHODS: Three systematic reviews and one narrative review were written to address focused questions on (1) the indications for the use of zygomatic implants; (2) the survival rates and complications associated with surgery in zygomatic implant placement; (3) long-term survival rates of zygomatic implants and (4) the biomechanical principles involved when zygoma implants are placed under functional loads. Based on the reviews, three working groups then developed Consensus Statements and Clinical Recommendations. These were discussed in a plenary and finalized in Delphi rounds. RESULTS: A total of 21 Consensus Statements were developed from the systematic reviews. Additionally, the group developed 17 Clinical Recommendations based on the Consensus Statements and the combined expertise of the participants. CONCLUSIONS: Zygomatic implants are mainly indicated in cases with maxillary bone atrophy or deficiency. Long-term mean zygomatic implant survival was 96.2% [95% CI 93.8; 97.7] over a mean follow-up of 75.4 months (6.3 years) with a follow-up range of 36-141.6 months (3-11.8 years). Immediate loading showed a statistically significant increase in survival over delayed loading. Sinusitis presented with a total prevalence of 14.2% [95% CI 8.8; 22.0] over a mean 65.4 months follow-up, representing the most common complication which may lead to zygomatic implant loss. The international experts suggested clinical recommendations regarding planning, surgery, restoration, outcomes, and the patient's perspective.