Lead-free alternative cation (Ethylammonium) in organometallic perovskites for thermoelectric applications.

CONTEXT: Hybrid halide perovskites are gaining prominence as a promising option in the advancement of photovoltaic devices. Ethylammonium-based hybrid halide perovskites have demonstrated impressive characteristics, such as a reduced band gap, enhanced stability, and non-toxic properties. In this study, we have explored the structural, electronic, optical, and thermoelectric characteristics of Ethylammonium tin chloride. We have found that Ethylammonium tin chloride (EASnCl3) is a direct wide band gap semiconductor. Additionally, we conducted calculations for various optical parameters, including the dielectric function, absorption coefficient, and refractive index, across a photon energy spectrum ranging from 0 to 7 eV. The research highlights the exceptional qualities of EASnCl3, which exhibits a high absorption coefficient and an elevated Seeback coefficient, among other favorable attributes. These findings position it as a promising material for cost-effective photovoltaic device applications, addressing concerns related to environmental stability. METHODS: Fundamental properties based on the full-potential linearized augmented plane wave (FP-LAPW) method, this computation was performed using the WIEN2k simulation code. We utilized the exchange-correlation potentials PBE-GGA and KTB-mBJ to compute the optimized structure, density of states, and band structure of the material. In order to calculate the thermoelectric properties of the material, the Boltztrap simulation tool has been used. There are several critical absorbance parameters, including the Seeback coefficient, figure of merit, power factor, electrical conductivity, and thermal conductivity, concerning their carrier concentration and chemical potential, that have been taken into consideration.

Modeling and simulation of multifaceted properties of X2NaIO6 (X = Ca and Sr) double perovskite oxides for advanced technological applications.

CONTEXT: In this study, the authors have investigated the structural, optoelectronic, thermoelectric, and thermodynamic properties of Ca2NaIO6 and Sr2NaIO6 double perovskite oxides. Both materials exhibit semiconductor behavior with direct band gaps (Eg) of 0.353 eV and 0.263 eV, respectively. Optical parameters like absorption coefficient α(ω), reflectivity R(ω), dielectric constants, and refractive index have been calculated. The most notable absorption peaks are identified at 5.52 eV (equal to 108.33 × 104 cm-1) in the case of Ca2NaIO6 and at 11.16 eV (equivalent to 118.17 × 104 cm-1) for Sr2NaIO6. These findings suggest a promising outlook for applications in optoelectronics. Moreover, their commendably low thermal conductivity and a high figure of merit, particularly at low temperatures (100 K), indicate their effectiveness as thermoelectric materials. This analysis underscores that these materials hold potential as suitable candidates for n-type doping, making them well-suited for use in thermoelectric devices. Studying thermal properties, including thermal expansion, bulk modulus, acoustic Debye temperature, entropy, and heat capacity, contributes to understanding the materials' thermodynamic stability. The titled materials are dynamically stable. The analysis of these double perovskite materials highlights their potential across various technological applications due to their advantageous structural, electronic, optical, and transport properties, offering new possibilities in material science and technology development. METHODS: The study utilized the full potential linearized augmented plane wave (FP-LAPW) method in conjunction with density functional theory within the WIEN2k simulation code. This approach is widely recognized as one of the most dependable methods for evaluating the photovoltaic characteristics of semiconducting perovskites. The thermoelectric properties were ascertained using the rigid band approach and the constant scattering time approximation, both implemented in the BoltzTraP computational code.

Electronic structure, theoretical power conversion efficiency, and thermoelectric properties of bismuth-based alkaline earth antiperovskites.

CONTEXT: This research paper investigates the properties and potential applications of antiperovskite materials. Antiperovskites are a class of materials with a unique crystal structure, where the central atom is surrounded by a cage of anions. We review recent research on antiperovskite-based materials for energy storage, photovoltaics, catalysis, and sensors. We discovered that these materials display direct band gap semiconductors, strong absorption in the visible (VIS), ultra-violet (UV), and near infrared regions (NIR) based on their fundamental features, which is the most admirable quality that may be found in many optoelectronic devices. Both mechanical and thermodynamic stability have been confirmed for these materials. We discovered that these materials exhibit high figures of merit through the calculation of transport properties, which makes them a promising candidate for thermoelectric devices. It is anticipated that the proposed material BiPMg3, which has a theoretical efficiency of 11.5%, will make a suitable photovoltaic absorber. This paper highlights the potential of these materials for future technological advancements. METHODS: Herein, we have used most authentic techniques to compute fundamental physical properties of these antiperovskites. Full-potential linear augmented plane wave (FP-LAPW) method has been used to investigate electronic, magnetic, optical properties, and make antiperovskites attractive for a variety of applications. In light of its implementation, we have checked the theoretical power conversion efficiency by first principles spectroscopic screening methodology, and inspect the fundamental physical parameters of antiperovskites, focusing on their potential as functional materials for energy and information technologies.

Curcumin nanoparticles as a multipurpose additive to achieve high-fidelity SLA-3D printing and controlled delivery.

Light-based three-dimensional (3D) printing has been under use extensively to fabricate complex geometrical constructs which find a vast application in the fields of drug delivery and tissue engineering fields due to its ability to recapitulate the intricate biological architecture and thus provides avenues to achieve previously unachievable biomedical devices. The inherent problem associated with light-based 3D printing (from a biomedical perspective) is that of light scattering causing inaccurate and defective prints which results in erroneous drug loading in 3D printed dosage forms and can also render the environment of the polymers toxic for the biological cells and tissues. In this regard, an innovative additive comprising of a nature-derived drug-cum-photoabsorber (curcumin) entrapped in naturally derived protein (bovine serum albumin) is envisaged to act as a photoabsorbing system that can improve the printing quality of 3D printed drug delivery formulations (macroporous pills) as well as provide stimuli-responsive release of the same upon oral ingestion. The delivery system was designed to endure the chemically and mechanically hostile gastric environment and deliver the drug in the small intestine to improve absorption. A 3 × 3 grid macroporous pill was designed (specifically to withstand the mechanically hostile gastric environment) and 3D printed using Stereolithography comprising of a resin system including acrylic Acid, PEGDA and PEG 400 along with curcumin loaded BSA nanoparticles (Cu-BSA NPs) as a multifunctional additive and TPO as the photoinitiator. The 3D printed macroporous pills were found to show excellent fidelity to CAD design as evident from the resolution studies. The mechanical performance of the macroporous pills was found to be extremely superior to monolithic pills. The pills found to release curcumin in pH responsive manner with slower release at acidic pH but faster release at intestinal pH due to its similar swelling behavior. Finally, the pills were found to be cytocompatible to mammalian kidney and colon cell lines.

Progress in theoretical study of lead-free halide double perovskite Na2AgSbX6 (X = F, Cl, Br, and I) thermoelectric materials.

CONTEXT: Herein, we have studied progressively novel metal lead-free halide double perovskite renewable energy materials. Due to their potential use in electronic devices, researchers have investigated these materials with a lot of interest. From the electronic structure, we have found that these are the indirect band gap semiconductors within the range between 1.273 and 3.986 eV. Optical parameters such as dielectric constant, electrical conductivity, and absorption coefficient have also been investigated, which have shown that these materials have potential use in photovoltaics. We have checked stability issues by thermodynamic parameters and phonon spectra. We have found them thermally stable; however, the phonon spectra show their dynamical instability and except for Na2AgSbF6 and Na2AgSbI6, the remaining compounds are weak in mechanical stability. For another futuristic purpose, thermoelectric parameters such as Seebeck coefficient, power factor, and figure of merit have also been calculated, which again verifies that these materials may be very useful in thermoelectric devices. Most of the parameters have been computed for the first time. METHODS: We have performed this computational work using WIEN2k simulation code, which is based on the full-potential linearized augmented plane wave (FP-LAPW) technique. It is one of the most reliable techniques to calculate the photovoltaic properties of semiconducting perovskites. The interaction between ion-core and valence electrons was dealt with within the PAW technique as implemented in Vienna Ab initio Simulation Package (VASP).

Effect of Tartrazine as Photoabsorber for Improved Printing Resolution of 3D Printed "Ghost Tablets": Non-Erodible Inert Matrices.

Stereolithography (SLA) 3D printing of pharmaceuticals suffers from the problem of light scattering, which leads to over-curing, resulting in the printing of objects that are non-compliant with design dimensions and the overloading of drugs. To minimize this problem, photoabsorbers such as tartrazine (food grade) can be used to absorb the stray light produced by scattering, leading to unintended photopolymerization. Ghost tablets (i.e., non-erodible inert matrices) were additively manufactured using SLA with varying ratios of polyethylene glycol diacrylate (PEGDA): polyethylene glycol (PEG) 300, along with tartrazine concentrations. The 3D printed ghost tablets containing maximum (0.03%) tartrazine were extremely precise in size and adhered to the nominal value of the metformin hydrochloride content. Resolution analysis reinstated the influence of tartrazine in achieving highly precise objects of even 0.07 mm2 area. Furthermore, 3D printed ghost tablets were characterized using analytical means, and swelling studies. Additionally, ghost tablets were tested for their mechanical robustness using dynamic mechanical and texture analysis, and were able to withstand strains of up to 5.0% without structural failure. The printed ghost tablets displayed a fast metformin hydrochloride release profile, with 93.14% release after 12 h when the PEG 300 ratio was at its maximum. Ghost tablets were also subjected to in vivo X-ray imaging, and the tablets remained intact even after four hours of administration and were eventually excreted in an intact form through fecal excretion.

Serum albumin is the strongest predictor of anti-tumor necrosis factor nonresponse in inflammatory bowel disease in resource-constrained regions lacking therapeutic drug monitoring

Background/Aims@#Evidence on predictors of primary nonresponse (PNR), and secondary loss of response (SLR) to anti-tumor necrosis factor (anti-TNF) agents in inflammatory bowel disease is scarce from Asia. We evaluated clinical/biochemical/molecular markers of PNR/SLR in ulcerative colitis (UC) and Crohn’s disease (CD). @*Methods@#Inflammatory bowel disease patients treated with anti-TNF agents (January 2005–October 2020) were ambispectively included. Data concerning clinical and biochemical predictors was retrieved from a prospectively maintained database. Immunohistochemistry for expression of oncostatin M (OSM), OSM receptor (OSM-R), and interleukin-7 receptor (IL-7R) were done on pre anti-TNF initiation mucosal biopsies. @*Results@#One-hundred eighty-six patients (118 CD, 68 UC: mean age, 34.1±13.7 years; median disease duration at anti-TNF initiation, 60 months; interquartile range, 28–100.5 months) were included. PNR was seen in 17% and 26.5% and SLR in 47% and 28% CD and UC patients, respectively. In CD, predictors of PNR were low albumin (P<0.001), postoperative recurrence (P=0.001) and high IL-7R expression (P<0.027) on univariate; and low albumin alone (hazard ratio [HR], 0.09; 95% confidence interval [CI], 0.03–0.28; P<0.001) on multivariate analysis respectively. Low albumin (HR, 0.31; 95% CI, 0.15–0.62; P=0.001) also predicted SLR. In UC, predictors of PNR were low albumin (P<0.001), and high C-reactive protein (P<0.001), OSM (P<0.04) and OSM-R (P=0.07) stromal expression on univariate; and low albumin alone (HR, 0.11; 95% CI, 0.03–0.39; P=0.001) on multivariate analysis respectively. @*Conclusions@#Low serum albumin at baseline significantly predicted PNR in UC and PNR/SLR in CD patients. Mucosal markers of PNR were high stromal OSM/OSM-R in UC and high IL-7R in CD patients.

Interferon-gamma release assay has poor diagnostic accuracy in differentiating intestinal tuberculosis from Crohn’s disease in tuberculosis endemic areas

Background/Aims@#Intestinal tuberculosis (ITB) and Crohn’s disease (CD) frequently present with a diagnostic dilemma because of similar presentation. Interferon-gamma release assay (IGRA) has been used in differentiating ITB from CD, but with sparse reports on its diagnostic accuracy in tuberculosis endemic regions and this study evaluated the same. @*Methods@#Patients with definitive diagnosis of ITB (n=59) or CD (n=49) who underwent IGRA testing (n=307) were retrospectively included at All India Institute of Medical Sciences, New Delhi (July 2014 to September 2021). CD or ITB was diagnosed as per standard criteria. IGRA was considered positive at >0.35 IU/mL.Relevant data was collected and IGRA results were compared between ITB and CD to determine its accuracy. @*Results@#Among 59 ITB patients (mean age, 32.6±13.1 years; median disease duration, 1 year; male, 59.3%), 24 were positive and 35 tested negative for IGRA. Among 49 CD patients (mean age, 37.8±14.0; median disease duration, 4 years; male, 61.2%), 12 were positive and 37 tested negative for IGRA. Hence, for diagnosing ITB, IGRA showed a sensitivity, specificity, positive and negative predictive values of 40.68%, 75.51%, 66.67%, and 51.39%, respectively. The area under the curve of IGRA for ITB diagnosis was 0.66 (95% confidence interval, 0.55–0.75). In a subset (n=64), tuberculin skin test (TST) showed sensitivity, specificity, positive and negative predictive values of 64.7%, 73.3%, 73.3%, and 64.71%, respectively. IGRA and TST were concordant in 38 (59.4%) patients with κ=0.17. @*Conclusions@#In a tuberculosis endemic region, IGRA had poor diagnostic accuracy for differentiating ITB from CD, suggesting a limited value of IGRA in this setting.

Nowotny-Juza phase KBeX (X = N, P, As, Sb, and Bi) half-Heusler compounds: applicability in photovoltaics and thermoelectric generators.

In the present research, we have considered KBeX (X = N, P, As, Sb, and Bi) half-Heusler compounds to study their inherent properties and have used FP-LAPW + lo scheme with density functional theory based WIEN2k package. The structural and band structural parameters have been explained, and various optical, thermoelectric, and thermodynamic parameters of half-Heuslers have also been analyzed in detail. The trend followed by the lattice constant of these materials approves the reliability of this investigation. The band structures show all the materials are direct band gap semiconductors except KBeN. Here, we have noticed that absorption is highest, and optical conductivity is also highest, confirming the theoretical concept and thus the accuracy of the projected outcomes. All materials (except KBeBi) show a figure of merit near unity in both p- and n-regions, and a small decay is observed with increasing temperature, which affirms their potential as thermoelectric candidates in both p- and n-regions at room temperature. Since conventional resources are limited in nature and their vanishing rate is more than their reproduction rate, hence to fulfil the high energy demand, it has become necessary to search for renewable energy resources. Herein, the values of optical and thermoelectric parameters confirm the photovoltaic and thermoelectric applications of these materials.

Glyoxal Fixation Is Optimal for Immunostaining of Brain Vessels, Pericytes and Blood-Brain Barrier Proteins.

Brain vascular staining is very important for understanding cerebrovascular pathologies. 4% paraformaldehyde is considered the gold standard fixation technique for immunohistochemistry and it revolutionized the examination of proteins in fixed tissues. However, this fixation technique produces inconsistent immunohistochemical staining results due to antigen masking. Here, we test a new fixation protocol using 3% glyoxal and demonstrate that this method improves the staining of the brain vasculature, pericytes, and tight junction proteins compared to 4% paraformaldehyde. Use of this new fixation technique will provide more detailed information about vascular protein expressions, their distributions, and colocalizations with other proteins at the molecular level in the brain vasculature.

Myriad Presentations of Intracranial Meningiomas: Pictoral Essay.

Meningiomas are the most common non-glial tumor of the central nervous system (CNS). Seen in middle age with a female preponderance, most of the tumors are solitary and supratentorial with benign histology (WHO grade I). Atypical and anaplastic (malignant) meningiomas (WHO grade II and III), comprise 15-20% of all intracranial meningiomas [12345]. Magnetic resonance imaging (MRI) is the imaging modality of choice.

Targeting Hemoglobin to Reduce Delayed Cerebral Ischemia After Subarachnoid Hemorrhage.

Delayed cerebral ischemia (DCI) continues to be a sequela of aneurysmal subarachnoid hemorrhage (aSAH) that carries significant morbidity and mortality. Aside from nimodipine, no therapeutic agents are available to reduce the incidence of DCI. Pathophysiologic mechanisms contributing to DCI are poorly understood, but accumulating evidence over the years implicates several factors. Those have included microvessel vasoconstriction, microthrombosis, oxidative tissue damage, and cortical spreading depolarization as well as large vessel vasospasm. Common to these processes is red blood cell leakage into the cerebrospinal fluids (CSF) and subsequent lysis which releases hemoglobin, a central instigator in these events. This has led to the hypothesis that early blood removal may improve clinical outcome and reduce DCI. This paper will provide a narrative review of the evidence of hemoglobin as an instigator of DCI. It will also elaborate on available human data that discuss blood clearance and CSF drainage as a treatment of DCI. Finally, we will address a recent novel device that is currently being tested, the Neurapheresis CSF Management System™. This is an automated dual-lumen lumbar drainage system that has an option to filter CSF and return it to the patient.

3D printing of nanocomposite pills through desktop vat photopolymerization (stereolithography) for drug delivery reasons.

BACKGROUND: The desktop vat polymerization process or stereolithography printing is an ideal approach to develop multifunctional nanocomposites wherein a conventional solid dosage form is used as a reservoir for compliant administration of drug-loaded nanocarriers. METHODS: In this study, a nanocomposite drug delivery system, that is, hydrogel nanoparticles of an approved nutraceutical, berberine entrapped within vat photopolymerized monoliths, was developed for drug delivery applications. For the fabrication of the nanocomposite drug delivery systems/pills, a biocompatible vat photopolymerized resin was selected as an optimum matrix capable of efficiently delivering berberine from stereolithography mediated 3D printed nanocomposite pill. RESULTS: The obtained data reflected the efficient formation of berberine-loaded hydrogel nanoparticles with a mean particle diameter of 95.05 ± 4.50 nm but low loading. Stereolithography-assisted fabrication of monoliths was achieved with high fidelity (in agreement with computer-aided design), and photo-crosslinking was ascertained through Fourier-transform infrared spectroscopy. The hydrogel nanoparticles were entrapped within the pills during the stereolithography process, as evidenced by electron microscopy. The nanocomposite pills showed a higher swelling in an acidic environment and consequently faster berberine release of 50.39 ± 3.44% after 4 h. The overall results suggested maximal release within the gastrointestinal transit duration and excretion of the exhausted pills. CONCLUSIONS: We intended to demonstrate the feasibility of making 3D printed nanocomposite pills achieved through the desktop vat polymerization process for drug delivery applications.

Stereolithography-assisted fabrication of 3D printed polymeric film for topical berberine delivery: in-vitro, ex-vivo and in-vivo investigations.

OBJECTIVES: 3D printed polymeric film intended for topical delivery of berberine (BBR) was developed using stereolithography (SLA) to enhance its local concentrations. PEGDMA was utilized as photopolymerizing resin, with PEG 400 as an inert component to facilitate BBR solubilization and permeation. METHODS: Three batches of topical films were printed by varying resin and PEG 400 compositions. In-vitro physicochemical characterizations of the 3D printed films were performed using several analytical techniques including ex-vivo drug permeation studies. In-vivo skin irritation studies were also conducted to assess the skin irritation potential. KEY FINDINGS: Films were 3D printed according to design specifications with minimal variations. Microscopic analysis confirmed 3D architecture, while thermal and X-ray diffraction studies revealed amorphous BBR entrapment. Drug permeation study showed effective ex-vivo diffusion up to 344.32 ± 61.20 µg/cm2 after 24.0 h possessing a higher ratio of PEG 400. In-vivo skin irritation studies have suggested the non-irritant nature of printed films. CONCLUSIONS: Results indicated the suitability of SLA 3D printing for topical application in the treatment of skin diseases. The presence of PEG 400 in the printed 3D films facilitated BBR diffusion, resulting in an improved flux in ex-vivo model and non-irritant properties in vivo.

3D printed hollow microneedles array using stereolithography for efficient transdermal delivery of rifampicin.

A 3D printed assembly of hollow microneedles (HMNs) array, conjoined with a reservoir void, was designed and additively manufactured using stereolithography (SLA) technology utilizing a proprietary class-I resin. The HMNs array was utilized for transdermal delivery of high molecular weight antibiotics, i.e., rifampicin (Mw 822.94 g/mol), which suffers from gastric chemical instability, low bioavailability, and severe hepatotoxicity. HMNs morphology was designed with sub-apical holes present in a quarter of the needle tip to improve its mechanical strength and integrity of the HMNs array. The HMNs array was characterized by optical microscopy and electron microscopy to ascertain the print quality and uniformity across the array. The system was also subjected to mechanical characterization for failure and penetration analyses. The ex vivo permeation and consequent transport of rifampicin across porcine skin were systematically evaluated. Finally, in vivo examinations of rifampicin administration through the microneedle reservoir system in SD rats revealed efficient penetration and desired bioavailability.

Epigenetics in blood-brain barrier disruption.

The vessels of the central nervous system (CNS) have unique barrier properties. The endothelial cells (ECs) which comprise the CNS vessels contribute to the barrier via strong tight junctions, specific transporters, and limited endocytosis which combine to protect the brain from toxins and maintains brain homeostasis. Blood-brain barrier (BBB) leakage is a serious secondary injury in various CNS disorders like stroke, brain tumors, and neurodegenerative disorders. Currently, there are no drugs or therapeutics available to treat specifically BBB damage after a brain injury. Growing knowledge in the field of epigenetics can enhance the understanding of gene level of the BBB and has great potential for the development of novel therapeutic strategies or targets to repair a disrupted BBB. In this brief review, we summarize the epigenetic mechanisms or regulators that have a protective or disruptive role for components of BBB, along with the promising approaches to regain the integrity of BBB.

Outcome of Conservative Therapy in COVID-19 Patients Presenting with Gastrointestinal Bleeding

Background/ObjectiveThere is a paucity of data on the management of gastrointestinal (GI) bleeding in patients with COVID-19 amid concerns about the risk of transmission during endoscopic procedures. We aimed to study the outcomes of conservative treatment for GI bleeding in patients with COVID-19. MethodsIn this retrospective analysis, 24 of 1342 (1.8%) patients with COVID-19, presenting with GI bleeding from 22 April to 22 July 2020, were included. ResultsThe mean age of patients was 45.8{+/-}12.7 years; 17 (70.8%) were males; upper GI (UGI) bleeding: lower GI (LGI) 23:1. Twenty-two (91.6%) patients had evidence of cirrhosis-21 presented with UGI bleeding while one had bleeding from hemorrhoids. Two patients without cirrhosis were presumed to have non-variceal bleeding. The medical therapy for UGI bleeding included vasoconstrictors-somatostatin in 17 (73.9%) and terlipressin in 4 (17.4%) patients. All patients with UGI bleeding received proton pump inhibitors and antibiotics. Packed red blood cells (PRBCs), fresh frozen plasma and platelets were transfused in 14 (60.9%), 3 (13.0%) and 3 (13.0%), respectively. The median PRBCs transfused was 1 (0-3) unit(s). The initial control of UGI bleeding was achieved in all 23 patients and none required an emergency endoscopy. At 5-day follow-up, none rebled or died. Two patients later rebled, one had intermittent bleed due to gastric antral vascular ectasia, while another had rebleed 19 days after discharge. Three (12.5%) cirrhosis patients succumbed to acute hypoxemic respiratory failure during hospital stay. ConclusionConservative management strategies including pharmacotherapy, restrictive transfusion strategy, and close hemodynamic monitoring can successfully manage GI bleeding in COVID-19 patients and reduce need for urgent endoscopy. The decision for proceeding with endoscopy should be taken by a multidisciplinary team after consideration of the patients condition, response to treatment, resources and the risks involved, on a case to case basis.

Self-emulsifying drug delivery system: Mucus permeation and innovative quantification technologies.

Mucus is a dynamic barrier which covers and protects the underlying mucosal epithelial membrane against bacteria and foreign particles. This protection mechanism extends to include therapeutic macromolecules and nanoparticles (NPs) through trapping of these particles. Mucus is not only a physical barrier that limiting particles movements based on their sizes but it selectively binds with particles through both hydrophilic and lipophilic interactions. Therefore, nano-carriers for mucosal delivery should be designed to eliminate entrapment by the mucus barrier. For this reason, different strategies have been approached for both solid nano-carriers and liquid core nano-carriers to synthesise muco-diffusive nano-carrier. Among these nano-strategies, Self-Emulsifying Drug Delivery System (SEDDS) was recognised as very promising nano-carrier for mucus delivery. The system was introduced to enhance the dissolution and bioavailability of orally administered insoluble drugs. SEDDS has shown high stability against intestinal enzymatic activity and more importantly, relatively rapid permeation characteristics across mucus barrier. The high diffusivity of SEDDS has been tested using various in vitro measurement techniques including both bulk and individual measurement of droplets diffusion within mucus. The selection and processing of an optimum in vitro technique is of great importance to avoid misinterpretation of the diffusivity of SEDDS through mucus barrier. In conclusion, SEDDS is a system with high capacity to diffuse through intestinal mucus even though this system has not been studied to the same extent as solid nano-carriers.

Amine-functionalized, porous silica-coated NaYF4:Yb/Er upconversion nanophosphors for efficient delivery of doxorubicin and curcumin.

Upconversion nanoparticles (UCNP) with unique multi-photon excitation photo-luminescence properties have been extensively explored as novel contrast agents for low-background biomedical imaging. There is an increasing interest in employing UCNPs as carrier for drug delivery as these offers a unique opportunity to combine therapy and diagnostics in one platform (theranostics). In the present work, we report microwave-assisted synthesis of hexagonal NaYF4:Yb/Er UCNPs coated with porous silica and functionalized with amine (UCNP@mSiO2). The UCNP@mSiO2 were investigated for controlled delivery of a chemotherapeutic agent, doxorubicin (DOX, hydrophilic), and a chemosensitizing agent, curcumin (CCM, hydrophobic). The drug loading was relatively higher for DOX (17.4%), in comparison to CCM (8.1%). The cumulative drug release from DOX-loaded UCNP@mSiO2 were 30 and 41% at physiological (7.4) and tumoral (6.4) pH, following a pseudo Fickian release pattern, whereas the release from CCM-loaded UCNP@mSiO2 were 27 and 50% at pH 7.4 and 6.4, following a non-Fickian and pseudo-Fickian release patterns, respectively. Both DOX and CCM-loaded UCNP@mSiO2 exhibited pH-dependent controlled drug delivery but the effect was more pronounced for CCM, the hydrophobic chemosensitizer. Cell viability assay using HeLa cells showed that DOX-loaded UCNP@mSiO2 inhibit cell growth in a dose-dependent manner, similar to free DOX, but the cell inhibition activity of free CCM was lower than CCM passively entrapped in UCNP@mSiO2. Confocal microscopy studies revealed cell uptake of both the drug by HeLa cells. Thus, UCNP@mSiO2 exhibited the unique capability to deliver hydrophilic and hydrophobic drugs, individually. UCNP@mSiO2 carrier, equipped with theranostic capabilities, may potentially be used for pH-responsive release of chemotherapeutic agents in cancer environment.