The influence of pressure on the acoustic cavitation in saturated CO2-expanded N, N-dimethylformamide.

CO2-expanded organic solvent is a kind of important fluid medium and has broad applications in chemical industry, environmental protection and other fields. Ultrasonic cavitation in gas expanded liquids (GXLs) is conducive to enhancing mass transfer and producing many exciting phenomena. In this paper, the ultrasonic cavitations and streaming in the saturated CO2-expanded liquid N, N-dimethylformamide (DMF) at 4.2 MPa and 5.2 MPa are observed by a high-speed camera. The cavitation intensity and time trace of pressure pulses are recorded using a PZT hydrophone. The influences of gas-liquid equilibrium pressure and ultrasonic power on the cluster dynamics of transient and stable cavitation are examined. The excess molar enthalpies required for CO2 dissociation from DMF are calculated by Peng-Robinson equations of state and the change of surface free energy of CO2-expanded DMF is predicted. The results show that the excess enthalpy of the mixture is one of the key factors to control ultrasonic cavitation at high pressurized conditions, while the surface tension is the key factor for low pressure. As the increase of applied ultrasonic power, the formation and collapsing frequency of bubble clusters increases, and the amplitude and cyclic frequency of pressure pulse are enhanced. The transient cavitation intensity increases as it reaches a maximum value at a certain ultrasonic power and then decreases. The change trends of stable cavitation intensity under different pressures are basically same. It can be concluded from the evidence that ultrasonic cavitation in CO2-expanded DMF is affected by the combined effect of compression and substitution: compression depresses the nucleation and growth of bubbles, while the high solubility of CO2 in DMF is conducive to the generation of bubbles in cavitation.

Ultrasonic cavitation in CO2-expanded N, N-dimethylformamide (DMF).

Due to the tunability in mass transfer, solvation and solubility, gas-expanded liquids show advantages over traditional organic solvents in many characteristics. Ultrasonication is a commonly used method to promote heat and mass transfer. The introduction of ultrasonic technology into the gas-expanded liquid system can promote the polymerization of polymer monomers, enhance extraction efficiency, and control the growth size of nanocrystals, etc. Although acoustic cavitation has been extensively explored in aqueous solutions, there are still few studies on cavitation in organic liquids, especially in gas-expanded liquid systems. In this article, the development of cavitation bubble cloud structure in CO2-expanded N, N-dimethylformamide (DMF) was observed by a high-speed camera, and the cavitation intensity was recorded using a spherical hydrophone. It was found that the magnitude of the transient cavitation energy was not only related to input power, but also closely related to CO2 content. The combination of ultrasound (causing a rapid alternation of gas solubility) and gas-expanded liquid system (causing a decrease in viscosity and surface tension of liquids) is expected to provide a perfect platform for high-speed mass transfer.