The relation between meniscal dynamics and tibiofemoral kinematics.

Over the past 30 years, research on meniscal kinematics has been limited by challenges such as low-resolution imaging and capturing continuous motion from static data. This study aimed to develop a computational knee model that overcomes these limitations and enables the continuous assessment of meniscal dynamics. A high-resolution MRI dataset (n = 11) was acquired in 4 configurations of knee flexion. In each configuration, the menisci were modeled based on the underlying osseous anatomy. Principal Polynomial Shape Analysis (PPSA) was employed for continuous meniscal modeling. Maximal medial anterior horn displacement occurred in 60° of flexion, equaling 6.24 mm posteromedial, while the posterior horn remained relatively stable. At 90° of flexion, the lateral anterior and posterior horn displaced posteromedially, amounting 5.70 mm and 6.51 mm respectively. The maximal observed Average Surface Distance (ASD) equaled 0.70 mm for lateral meniscal modeling in 90° of flexion. Based on our results, a strong relation between meniscal dynamics and tibiofemoral kinematics was confirmed. Expanding on static meniscal modeling and employing PPSA, we derived and validated a standardized and systematic methodological workflow.

Quantifying walking speeds in relation to ankle biomechanics on a real-time interactive gait platform: a musculoskeletal modeling approach in healthy adults.

Background: Given the inherent variability in walking speeds encountered in day-to-day activities, understanding the corresponding alterations in ankle biomechanics would provide valuable clinical insights. Therefore, the objective of this study was to examine the influence of different walking speeds on biomechanical parameters, utilizing gait analysis and musculoskeletal modelling. Methods: Twenty healthy volunteers without any lower limb medical history were included in this study. Treadmill-assisted gait-analysis with walking speeds of 0.8 m/s and 1.1 m/s was performed using the Gait Real-time Analysis Interactive Lab (GRAIL®). Collected kinematic data and ground reaction forces were processed via the AnyBody® modeling system to determine ankle kinetics and muscle forces of the lower leg. Data were statistically analyzed using statistical parametric mapping to reveal both spatiotemporal and magnitude significant differences. Results: Significant differences were found for both magnitude and spatiotemporal curves between 0.8 m/s and 1.1 m/s for the ankle flexion (p < 0.001), subtalar force (p < 0.001), ankle joint reaction force and muscles forces of the M. gastrocnemius, M. soleus and M. peroneus longus (α = 0.05). No significant spatiotemporal differences were found between 0.8 m/s and 1.1 m/s for the M. tibialis anterior and posterior. Discussion: A significant impact on ankle joint kinematics and kinetics was observed when comparing walking speeds of 0.8 m/s and 1.1 m/s. The findings of this study underscore the influence of walking speed on the biomechanics of the ankle. Such insights may provide a biomechanical rationale for several therapeutic and preventative strategies for ankle conditions.

Application of external torque enhances the detection of subtle syndesmotic ankle instability in a weight-bearing CT.

PURPOSE: Acute syndesmotic ankle injuries continue to impose a diagnostic dilemma and it remains unclear whether weightbearing and/or external rotation should be added during the imaging process. Therefore, the aim of this study was to assess if combined weightbearing and external rotation increases the diagnostic sensitivity of syndesmotic ankle instability using weightbearing CT (WBCT) imaging, compared to isolated weightbearing. METHODS: In this retrospective study, patients with an acute syndesmotic ankle injury were analysed using a WBCT (N = 21; Age = 31.6 ± 14.1 years old). Inclusion criteria were an MRI confirmed syndesmotic ligament injury imaged by a WBCT of the ankle during weightbearing and combined weightbearing-external rotation. Exclusion criteria consisted of fracture associated syndesmotic injuries. Three-dimensional (3D) models were generated from the CT slices. Tibiofibular displacement and talar rotation were quantified using automated 3D measurements (anterior tibiofibular distance (ATFD), Alpha angle, posterior Tibiofibular distance (PTFD) and Talar rotation (TR) angle in comparison to the contralateral non-injured ankle. RESULTS: The difference in neutral-stressed Alpha angle and ATFD showed a significant difference between patients with a syndesmotic ankle lesion and contralateral control (P = 0.046 and P = 0.039, respectively). The difference in neutral-stressed PTFD and TR angle did not show a significant difference between patients with a syndesmotic ankle lesion and healthy ankles (n.s.). CONCLUSION: Application of combined weightbearing-external rotation reveals an increased ATFD in patients with syndesmotic ligament injuries. This study provides the first insights based on 3D measurements to support the potential relevance of applying external rotation during WBCT imaging. In clinical practice, this could enhance the current diagnostic accuracy of subtle syndesmotic instability in a non-invasive manner. However, to what extent certain displacement patterns require operative treatment strategies has yet to be determined in future studies. LEVEL OF EVIDENCE: Level III.

Personalized statistical modeling of soft tissue structures in the knee.

Background and Objective: As in vivo measurements of knee joint contact forces remain challenging, computational musculoskeletal modeling has been popularized as an encouraging solution for non-invasive estimation of joint mechanical loading. Computational musculoskeletal modeling typically relies on laborious manual segmentation as it requires reliable osseous and soft tissue geometry. To improve on feasibility and accuracy of patient-specific geometry predictions, a generic computational approach that can easily be scaled, morphed and fitted to patient-specific knee joint anatomy is presented. Methods: A personalized prediction algorithm was established to derive soft tissue geometry of the knee, originating solely from skeletal anatomy. Based on a MRI dataset (n = 53), manual identification of soft-tissue anatomy and landmarks served as input for our model by use of geometric morphometrics. Topographic distance maps were generated for cartilage thickness predictions. Meniscal modeling relied on wrapping a triangular geometry with varying height and width from the anterior to the posterior root. Elastic mesh wrapping was applied for ligamentous and patellar tendon path modeling. Leave-one-out validation experiments were conducted for accuracy assessment. Results: The Root Mean Square Error (RMSE) for the cartilage layers of the medial tibial plateau, the lateral tibial plateau, the femur and the patella equaled respectively 0.32 mm (range 0.14-0.48), 0.35 mm (range 0.16-0.53), 0.39 mm (range 0.15-0.80) and 0.75 mm (range 0.16-1.11). Similarly, the RMSE equaled respectively 1.16 mm (range 0.99-1.59), 0.91 mm (0.75-1.33), 2.93 mm (range 1.85-4.66) and 2.04 mm (1.88-3.29), calculated over the course of the anterior cruciate ligament, posterior cruciate ligament, the medial and the lateral meniscus. Conclusion: A methodological workflow is presented for patient-specific, morphological knee joint modeling that avoids laborious segmentation. By allowing to accurately predict personalized geometry this method has the potential for generating large (virtual) sample sizes applicable for biomechanical research and improving personalized, computer-assisted medicine.

Validation of a personalized ligament-constraining discrete element framework for computing ankle joint contact mechanics.

BACKGROUND AND OBJECTIVE: Computer simulations of joint contact mechanics have great merit to improve our current understanding of articular ankle pathology. Owed to its computational simplicity, discrete element analysis (DEA) is an encouraging alternative to finite element analysis (FEA). However, previous DEA models lack subject-specific anatomy and may oversimplify the biomechanics of the ankle. The objective of this study was to develop and validate a personalized DEA framework that permits movement of the fibula and incorporates personalized cartilage thickness as well as ligamentous constraints. METHODS: A linear and non-linear DEA framework, representing cartilage as compressive springs, was established, verified, and validated. Three-dimensional (3D) bony ankle models were constructed from cadaveric lower limb CT scans imaged during application of weight (85 kg) and/or torque (10 Nm). These 3D models were used to generate cartilage thickness and ligament insertion sites based on a previously validated statistical shape model. Ligaments were modelled as non-linear tension-only springs. Validation of contact stress prediction was performed using a simple, axially constrained tibiotalar DEA model against an equivalent FEA model. Validation of ligamentous constraints compared the final position of the ankle mortise to that of the cadaver after application of torque and sequential ligament sectioning. Finally, a combined ligamentous-constraining DEA model was validated for predicted contact stress against an equivalent ligament-constraining FEA model. RESULTS: The linear and non-linear DEA model reproduced a mean articular contact stress within 0.36 MPa and 0.39 MPa of the FEA calculated stress, respectively. With respect to the ligamentous validation, the DEA ligament-balancing algorithm could reproduce the position of the distal fibula within the ankle mortise to within 0.97 mm of the experimental observed distal fibula. When combining the ligament-constraining and contact stress algorithm, DEA was able to reproduce a mean articular contact stress to within 0.50 MPa of the FEA calculated contact stress. CONCLUSION: The DEA framework presented herein offers a computationally efficient alternative to FEA for the prediction of contact stress in the ankle joint, manifesting its potential to enhance the mechanical understanding of articular ankle pathologies on both a patient-specific and population-wide level. The novelty of this model lies in its personalized nature, inclusion of the distal tibiofibular joint and the use of non-linear ligament balancing to maintain the physiological ankle joint articulation.

Personalised statistical modelling of soft tissue structures in the ankle.

BACKGROUND AND OBJECTIVE: Revealing the complexity behind subject-specific ankle joint mechanics requires simultaneous analysis of three-dimensional bony and soft-tissue structures. 3D musculoskeletal models have become pivotal in orthopedic treatment planning and biomechanical research. Since manual segmentation of these models is time-consuming and subject to manual errors, (semi-) automatic methods could improve the accuracy and enlarge the sample size of personalised 'in silico' biomechanical experiments and computer-assisted treatment planning. Therefore, our aim was to automatically predict ligament paths, cartilage topography and thickness in the ankle joint based on statistical shape modelling. METHODS: A personalised cartilage and ligamentous prediction algorithm was established using geometric morphometrics, based on an 'in-house' generated lower limb skeletal model (N = 542), tibiotalar cartilage (N = 60) and ankle ligament segmentations (N = 10). For cartilage, a population-averaged thickness map was determined by use of partial least-squares regression. Ligaments were wrapped around bony contours based on iterative shortest path calculation. Accuracy of ligament path and cartilage thickness prediction was quantified using leave-one-out experiments. The novel personalised thickness prediction was compared with a constant cartilage thickness of 1.50 mm by use of a paired sample T-test. RESULTS: Mean distance error of cartilage and ligament prediction was 0.12 mm (SD 0.04 mm) and 0.54 mm (SD 0.05 mm), respectively. No significant differences were found between the personalised thickness cartilage and segmented cartilage of the tibia (p = 0.73, CI [-1.60 .10-17, 1.13 .10-17]) and talus (p = 0.95, CI[ -1.35 .10-17, 1.28 .10-17]). For the constant thickness cartilage, a statistically significant difference was found in 89% and 92% of the tibial (p < 0.001, CI [0.51, 0.58]) and talar (p < 0.001, CI [0.33, 0.40]) cartilage area. CONCLUSIONS: In this study, we described a personalised prediction algorithm of cartilage and ligaments in the ankle joint. We were able to predict cartilage and main ankle ligaments with submillimeter accuracy. The proposed method has a high potential for generating large (virtual) sample sizes in biomechanical research and mitigates technological advances in computer-assisted orthopaedic surgery.

Three-dimensional displacement after a medializing calcaneal osteotomy in relation to the osteotomy angle and hindfoot alignment.

BACKGROUND: A medializing calcaneal osteotomy is frequently performed to correct adult-acquired flatfoot deformities, but there is lack of data on the associated three-dimensional variables defining the final correction. The aim of this study was to assess the correlation between the pre-operative hindfoot valgus deformity and calcaneal osteotomy angles and the post-operative calcaneal displacement. METHODS: Weight-bearing CT scans obtained pre- and post-operatively were retrospectively analyzed for sixteen patients. Corresponding three-dimensional bone models were used to measure valgus deformity pre- and post-operatively, inclination of the osteotomy and displacement of the calcaneus. Linear regression was conducted to assess the relationship between these measurements. RESULTS: On average, the hindfoot valgus changed from 13.1° (±4.6) pre-operatively to 5.7° (±4.3) post-operatively. A mean inferior displacement of 3.2mm (±1.3) was observed along the osteotomy with a mean inclination of 54.6° (±5.6), 80.5° (±10.7), -13.7° (±15.7) in the axial, sagittal and coronal planes, respectively. A statistically significant positive relationship (p<.05, R2=0.6) was found between the pre-operative valgus, the axial osteotomy inclination, and the inferior displacement. CONCLUSIONS: This study shows that the degree of pre-operative hindfoot valgus and the axial osteotomy angle are predictive factors for the amount of post-operative inferior displacement of the calcaneus. These findings demonstrate the added value of a computer-based pre-operative planning in clinical practice. Level of evidence II Prospective comparative study.

Cascaded statistical shape model based segmentation of the full lower limb in CT.

Image segmentation has become an important tool in orthopedic and biomechanical research. However, it greatly remains a time-consuming and laborious task. In this manuscript, we propose a fully automatic model-based segmentation pipeline for the full lower limb in computed tomography (CT) images. The method relies on prior shape model fitting, followed by a gradient-defined free from deformation. The technique allows for the generation of anatomically corresponding surface meshes, which can subsequently be applied in anatomical and mechanical simulation studies. Starting from an initial, small (n ≤ 10) sample of manual segmentations, the model is continuously updated and refined with newly segmented training samples. Validation of the segmentation pipeline was performed by comparing the automatic segmentations against corresponding manual segmentations. Convergence of the segmentation pipeline was obtained in 250 cases and failed in three samples. The average distance error ranged from 0.53 to 0.76 mm and maximal error ranged from 2.0 to 7.8 mm for the 7 different osteological structures that were investigated. The accuracy of the shape model-based segmentation gradually increased as the number of training shapes in the updated population also increased. When optimized with the free form deformation, however, average segmentation accuracy rapidly plateaued from already as little as 20 training samples on. The maximum segmentation error plateaued from 100 training samples on.

Reliability and correlation analysis of computed methods to convert conventional 2D radiological hindfoot measurements to a 3D setting using weightbearing CT.

PURPOSE: The exact radiographic assessment of the hindfoot alignment remains challenging. This is reflected in the different measurement methods available. Weightbearing CT (WBCT) has been demonstrated to be more accurate in hindfoot measurements. However, current measurements are still performed in 2D. This study wants to assess the use of computed methods to convert the former uniplanar hindfoot measurements obtained after WBCT towards a 3D setting. METHODS: Forty-eight patients, mean age of 39.6 ± 13.2 years, with absence of hindfoot pathology were included. A WBCT was obtained, and images were subsequently segmented and analyzed using computer-aided design operations. In addition to the hindfoot angle (HA), other ankle and hindfoot parameters such as the anatomical tibia axis, talocalcaneal axis (TCA), talocrural angle, tibial inclination (TI), talar tilt, and subtalar vertical angle were determined in 2D and 3D. RESULTS: The mean [Formula: see text] was [Formula: see text] of valgus ± 3.2 and the [Formula: see text] was [Formula: see text] of valgus ± 6.5. These angles differed significantly from each other with a [Formula: see text]. The correlation between both showed to be good by [Formula: see text] Pearson correlation coefficient (r) of 0.72 ([Formula: see text]). The [Formula: see text] showed to be excellent when compared to the [Formula: see text], which was good. Similar findings were obtained in other angles. The highest correlation was seen between the [Formula: see text] and [Formula: see text] (r = 0.83, [Formula: see text]) and an almost perfect agreement in the [Formula: see text] ([Formula: see text]). CONCLUSION: This study shows a good and reliable correlation between the [Formula: see text] and [Formula: see text]. However, the [Formula: see text] overcomes the shortcomings of inaccuracy and provides valuable spatial data that could be incorporated during computer-assisted surgery to assess the multiplanar correction of a hindfoot deformity.

[Retrospective study--pregnancy after assisted medical reproduction from 2001 to 2009 at the Central Hospital of Luxembourg (first section)]. / Etude retrospective--suivis de grossesses après Procréation Médicalement Assistée (PMA) de 2001 à 2009 au Centre Hospitalier de Luxembourg (1re partie).

Retrospective study on a nine year ART practice focusing on pregnancy outcomes and multiple pregnancies, their complications, the gestational duration, delivery options, the new born weights and health statements til the age of two. Post ART pregnancies seem to have an increased complication rate; multiple births are more frequent than with spontaneous conception. The first chapter deals with the entire group. The second chapter analyses several sub-groups according to the ART method employed. The results are compared to publications in PubMed and Medline.

[Retrospective studies of pregnancies after assisted medical reproduction from 2001-2009 and Central Hospital in Luxembourg (part 2)]. / Etude rétrospective--suivis de grossesses après Procréation Médicalement Assistée (PMA) de 2001 à 2009 au Centre Hospitalier de Luxembourg (2e partie).

The first chapter analyses the ART methods of the Centre Hospitalier of Luxembourg, in the department of reproductive medicine between 2001 and 2009. The second chapter examines the techniques individually, their influence on pregnancy outcomes, the complications on offsprings and their health. The results coincide with literature in that risks are acceptable as long as good medical and biological conditions are maintained. Multiple pregnancies remain the most frequent complication, particularly once out of IVF. These are analysed separately as well as the pregnancies after egg and semen donation.

[Biological parameters for evaluation of ovarian reserve and resultant antimullerian hormone]. / Paramètres biologiques d'evaluation de la réserve ovarienne et résultats en PMA.

No biological parameter allows a predictive result in ART for ovary stimulation. We studied the interest of dosing AMH in ovary stimulation in balance with the the clinical context.

Two distinct mechanisms regulate luteovirus transmission efficiency and specificity at the aphid salivary gland.

Barley yellow dwarf luteovirus (BYDV) particles are transmitted by aphids in a species-specific manner. Transmission to plants requires that the virus particles be transported across the basal lamina and plasmalemma of the accessory salivary gland (ASG). To characterize the role of the ASG basal lamina in regulating BYDV transmission, five aphid species were microinjected with purified New York isolates BYDV-PAV or -RPV. Both viruses associated specifically only with the ASG basal lamina. The ability of virions to penetrate the basal lamina was separate from the ability to penetrate the plasmalemma. When the salivary glands of vector, Sitobion avenae, or non-vector, Rhopalosiphum maidis, aphids were incubated in vitro with New York isolate BYDV-MAV, virions only attached to the ASG basal lamina of S. avenae. When anionic and cationic ferritin were microinjected into aphids, only cationic ferritin aggregated on the surface of the ASG basal lamina and at openings of plasmalemma invaginations into the cytoplasm, suggesting that these sites had a net negative charge. In vitro studies of anionic and cationic gold penetration of ASG basal laminae indicated a macromolecular size exclusion limit of approximately 20 nm that depended on charge. Anionic gold particles did not accumulate in the basal lamina as densely as the 25 nm BYDV particles, suggesting that the virus particles have a greater affinity for the ASG basal lamina. These results indicate that both the ASG basal lamina and plasmalemma contain specific components independently involved in the recognition and transmission of luteoviruses.

[Initial experience with the NOVACOR left heart assist system in transition for heart transplantation at the Grosshadern Clinic]. / Erste Anwendung des Linksherzunterstützungssystems NOVACOR als Uberbrückung zur Herztransplantation am Klinikum Grosshadern.

We recently used an electrically powered left ventricular assist device (NOVACOR Corp., Oakland, Calif.) to support the circulation of a 17-year-old man with profound circulatory impairment. He had been regularly listed for cardiac transplantation previously because of dilated cardiomyopathy, and decompensated acutely with severe biventricular failure before a suitable donor heart became available. Isolated left ventricular support with the NOVACOR system provided adequate haemodynamics and recovery of right ventricular, hepatic and renal function. After 2 days of support, orthotopic heart transplantation could be performed successfully. Five days after transplantation he developed a massive cerebral haemorrhage during a hypertensive crisis of which he recovered completely after neurosurgery without any residuals. He ist currently doing extremely well some 14 months after transplantation.

Doppler velocimetry and placental disease.

Quantitative placental examinations were performed on 47 women who had Doppler flow velocity studies of the umbilical artery during their pregnancy. The systolic-diastolic ratio of the umbilical artery was used as the measurement parameter to divide the study population into two groups. Group 1 consisted of women with normal systolic-diastolic ratios (systolic-diastolic less than 3), and group 2 consisted of women with an elevated systolic-diastolic ratio (systolic-diastolic greater than or equal to 3). The group with an increase in systolic-diastolic ratio had more perinatal complications as demonstrated by two stillbirths, a higher incidence of cesarean deliveries for fetal distress, and more admissions to the neonatal intensive care unit. Significant differences were found when gestational age at delivery, placental weight, birth weight, and the number of small muscular arteries in the placenta were compared. Since gestational age may have accounted for the difference in placental findings, patients were matched for gestational age. The placental weights were comparable, but there were fewer small muscular arteries in those patients with an increase in systolic-diastolic ratio (p less than 0.001). In addition, when these findings were examined to determine the influence of diminished uterine flow velocity, none was found.