Assessment of H2S and BTEX concentrations in ambient air using passive sampling method and the health risks.

Wastewater treatment plants (WWTPs) may be a source of nuisance in neighbouring places due to hydrogen sulphide (H2S) and BTEX (benzene, toluene, ethylbenzene, and xylenes) emissions. In this study, samples were collected from WWTP workplace ambient air and outdoor ambient air around one of the largest WWTPs in Istanbul with a capacity of 250,000 m3/day to evaluate the effects of H2S and BTEX emissions. Samples were collected in three seasons for 15-day durations: winter (November 2015), spring (May 2015), and summer (August 2016). Average concentrations of H2S and BTEX were determined as 1.1 and 56.2 µg/m3, respectively. Average concentrations BTEX components were 4.9, 20.7, 6.4, and 24.2 µg/m3, respectively. Health risk assessment for plant workers and local residents was performed for H2S and BTEX inhalation exposure using the method by USEPA. Results show that H2S and BTEX emissions do not have harmful effects on human health.

Assessment of occupational exposure to fine particulate matter in dental prosthesis laboratories in Kocaeli, Turkey.

Dental prosthesis laboratories (DPLs) are among the workplaces where predominantly manual production takes place. In such working environments, during the manual manufacturing process, which involves fine smoothing and polishing of dental prostheses, fine particulate matter is released into the ambient air. In this study, the particulate matter (PM) concentrations and elemental content of the fine particles in the working ambient air were identified in six DPLs in Kocaeli, Turkey. PM2.5 mass concentrations, measured in all the DPLs, ranged between 80.8 and 1645 µg/m3 (mean 414 ± 406). As a result of the analyses performed with an ICP-MS device (Perkin Elmer Elan®DRC-e), trace elements of Be, Cd, Hg, and, notably, Co, Cr, Mo, and Ni were found. The researchers calculated the excess lifetime cancer risks and total hazard indexes. The average total cancer risk for all the DPLs was 8 × 10-3, which is higher than the acceptable limit of 1.0 × 10-6, and the total hazard index was 187, which is greater than the acceptable limit of 1.0. Considering these high-level risks, the study concluded that there is a need for new production methods, and strict application of occupational health and safety measures, to reduce the fine particle exposure of the workers in the laboratories. In addition, there are prescribed limit values for particulate matter only for respirable particles in working environments. The establishment of limit values, especially for PM2.5 concentrations, is important for the protection of the health of the employees.

Atmospheric ambient trace element concentrations of PM10 at urban and sub-urban sites: source apportionment and health risk estimation.

In this study, PM10 concentrations and elemental (Al, Fe, Sc, V, Cr, Mn, Co, Ni, Cu, Zn, As, Se, Mo, Ag, Cd, Sn, Sb, Ba, Pb, and Bi) contents of particles were determined in Düzce, Turkey. The particulate matter samplings were carried out in the winter and summer seasons simultaneously in both urban and sub-urban sampling sites. The average PM10 concentration measured in the winter season was 86.4 and 27.3 µg/m3, respectively, in the urban and sub-urban sampling sites, while it was measured as 53.2 and 34.7 µg/m3 in the summer season. According to the results, it was observed that the PM10 levels and the element concentrations reached higher levels, especially at the urban sampling site, in the winter season. The positive matrix factorization model (PMF) was applied to the data set for source apportionment. Analysis with the PMF model revealed six factors for both the urban (coal combustion, traffic, oil combustion, industry, biomass combustion, and soil) and sub-urban (industry, oil combustion, traffic, road dust, soil resuspension, domestic heating) sampling sites. Loadings of grouped elements on these factors showed that the major sources of the elements in the atmosphere of Düzce were traffic, fossil fuel combustion, and metal industry-related emissions.

Determination of the personal, indoor and outdoor exposure levels of inorganic gaseous pollutants in different microenvironments in an industrial city.

We measured SO2, NO2 and O3 concentrations during the summer and winter in Kocaeli, Turkey. The sampling was carried out indoors and outdoors at homes, schools and offices. Personal samplers were also used to determine personal exposures to these pollutants. High NO2 and SO2 concentrations were observed in outdoor samples collected close to locations characterized by heavy urban traffic. Concentrations of O3, on the other hand, were higher in rural areas around the city due to ozone distillation. For both sampling periods, the concentrations of outdoor SO2 and O3 were higher than for indoor and personal samples; however, the NO2 concentrations were higher in indoor and personal samples, indicating that outdoor sources significantly contribute to indoor SO2 and O3 levels and that indoor NO2 concentrations are primarily modulated by sources within buildings. Seasonal variations in pollutant concentrations showed statistically significant differences. Indoor and outdoor concentrations of NO2 and SO2 measured in the winter were higher than the levels measured in the summer; O3 concentrations, on the other hand, exhibited the opposite trend. Active-to-passive concentration ratios for NO2, SO2 and O3 were 0.99, 1.08 and 1.16, respectively; the corresponding outdoor ratios were 0.95, 0.99 and 1.00.

Fine particulate matter in the indoor air of barbeque restaurants: elemental compositions, sources and health risks.

Cooking is a significant source of indoor particulate matter that can cause adverse health effects. In this study, a 5-stage cascade impactor was used to collect particulate matter from 14 restaurants that cooked with charcoal in Kocaeli, the second largest city in Turkey. A total of 24 elements were quantified using ICP-MS. All of the element contents except for Mn were higher for fine particles (PM2.5) than coarse particles (PM>2.5), and the major trace elements identified in the PM2.5 included V, Se, Zn, Cr, As, Cu, Ni, and Pb. Principle component analysis (PCA) and enrichment factor (EF) calculations were used to determine the sources of PM2.5. Four factors that explained over 77% of the total variance were identified by the PCA. These factors included charcoal combustion, indoor activities, crustal components, and road dust. The Se, As, Cd, and V contents in the PM2.5 were highly enriched (EF>100). The health risks posed by the individual metals were calculated to assess the potential health risks associated with inhaling the fine particles released during charcoal cooking. The total hazard quotient (total HQ) for a PM2.5 of 4.09 was four times greater than the acceptable limit (i.e., 1.0). In addition, the excess lifetime cancer risk (total ELCR) for PM2.5 was 1.57×10(-4), which is higher than the acceptable limit of 1.0×10(-6). Among all of the carcinogenic elements present in the PM2.5, the cancer risks resulting from Cr(VI) and As exposure were the highest (i.e., 1.16×10(-4) and 3.89×10(-5), respectively). Overall, these results indicate that the lifetime cancer risk associated with As and Cr(VI) exposure is significant at selected restaurants, which is of concern for restaurant workers.

Metals in the surface sediments of Istanbul Strait (Turkey).

Surface sediments from 17 stations in the Istanbul Strait and Marmara Sea were collected and analysed for major and trace elements by wavelength-dispersive X-ray fluorescence spectrometry (WDXRF). Metal concentrations in surface sediments varied from 1.3 to 7.2 % for Al, 4.8 to 18 mg kg(- 1) for As, 119 to 599 mg kg(- 1) for Ba, below detection limit (bdl) to 6.6 mg kg(- 1) for Cd, 18 to 222 mg kg(- 1) for Cr, 7.6 to 180 mg kg(- 1) for Cu, 1.0 to 5.5 % for Fe (10 000 to 55 000 mg kg(- 1)), 171 to 718 mg kg(- 1)for Mn, 3.3 to 64 mg kg(- 1) for Ni, 4.5 to 461 mg kg(- 1) for Pb, 1.3 to 68 mg kg(- 1) for Sn, 19 to 170 mg kg(- 1) for V and 16 to 859 mg kg(- 1) for Zn. Three tools have been applied in order to evaluate metal pollution in the sediments; Sediment quality guidelines (SQGs), enrichment factors (EFs) and geoaccumulation index (I(geo)). SQGs values indicate that Pb and Ni are the most likely contaminants to cause adverse biological effects. On the other hand, both metal enrichment factors and geoaccumulation index show that As, Zn, Pb and Cd contaminations exist in the entire study area and contamination of other metals is also present in some sites depending on the sources. Factor analysis (FA) receptor modelling technique was applied to investigate the sources affecting surface sediment samples at the Istanbul Strait.

Heavy metal pollution assessment in sediments of the Izmit Bay, Turkey.

Surface sediments in the fraction < 63 microm collected from eight stations along the north coastline of Izmit Bay, north-eastern Marmara Sea, Turkey, were analyzed for major (organic carbon, Al, Ba, Fe and Mg) and trace (As, Cd, Co, Cr, Cu, Mo, Ni, Pb and Zn) elements by using inductively coupled plasma atomic emission spectrometry (ICP-AES). Sediments heavily contaminated are evaluated by the Sediment Quality Guidelines (SQG) of US EPA. The results were compared with the marine sediment quality standards (SQS), as well as literature values reported to assess the pollution status of the sediments. The enrichment factors (EFs) were calculated to evaluate actual level of contamination for all the elements using the earth crust as reference matrix, based on elemental values by Mason which show a normal pattern near to unity. The analysis revealed two groups of elements: (i) Arsenic, Cd, Pb, and Zn are the most enriched elements; (ii) Barium, Co, Cr, Cu, Fe, Mg, Mo and Ni are at background levels. The results show that road traffic run-offs, paint industries and coal combustion are among the most significant sources.

The distribution and sources of heavy metals in Izmit Bay surface sediments affected by a polluted stream.

Dil Deresi stream is a highly contaminated stream passing through the most heavily industrialized area of Izmit Bay. In this research, surface sediments in the <63-microm fraction collected from 34 sites at western part of Izmit Bay, Northeastern Marmara Sea, Turkey were analyzed by ICP-AES for Al, As, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Sn and Zn. Metal concentrations were compared with the marine sediment quality standards (SQS) and literature data to assess the pollution status of the sediments. Enrichment factors (EFs) were calculated to assess whether the concentrations observed represent background or contaminated levels. The analysis revealed three groups of elements: (1) Sn is the most enriched element; (2) As, Cd, Pb and Zn are minor enriched elements; and (3) Co, Cr, Cu, Fe, Mg, Mn and Ni are at background concentrations. The distribution maps of the concentrations and enrichment factors for all heavy metals were also produced as a contour plot based on Geographic Information System (GIS) technology.

Source apportionment of trace metals in surface waters of a polluted stream using multivariate statistical analyses.

Surface water samples were collected from ten previously selected sites of the polluted Dil Deresi stream, during two field surveys, December 2001 and April 2002. All samples were analyzed using ICP-AES, and the concentrations of trace metals (Al, As, Ba, Cd, Co, Cr, Cu, Fe, Pb, Sn and Zn) were determined. The results were compared with national and international water quality guidelines, as well as literature values reported for similar rivers. Factor analysis (FA) and a factor analysis-multiple regression (FA-MR) model were used for source apportionment and estimation of contributions from identified sources to the concentration of each parameter. By a varimax rotated factor analysis, four source types were identified as the paint industry; sewage, crustal and road traffic runoff for trace metals, explaining about 83% of the total variance. FA-MR results showed that predicted concentrations were calculated with uncertainties lower than 15%.

Ecological risk assessment using trace elements from surface sediments of Izmit Bay (Northeastern Marmara Sea) Turkey.

The aim of this study was to study ecological risk assessment of trace elements (As, Cd, Cr, Cu, Ni, Pb and Zn) in Izmit Bay surface sediments in the <63 microm fraction. Sediment samples were collected from 8 sites along the north coastline of the bay. Samples were subjected to a total digestion technique and analyzed for major (organic carbon) and minor (As, Cd, Cr, Cu, Ni, Pb and Zn) elements. Sediments heavily contaminated are evaluated by the Sediment Quality Guidelines (SQG) of US EPA. The degree of contamination (Cd) is estimated as very high at each site. Two sets of SQGs, effect range-low/effect range median values and TEL/probable effect level (PEL) values were used in our study. Sediments from the each site are judged toxic when two or more of the PEL values exceed EPA guidelines. Our results are in agreement with previously reported sediment toxicity test results.