Study on the Physico-Chemical Properties of the Si Nanowires Surface.

Silicon nanowires (Si-NWs) have been extensively studied for their numerous applications in nano-electronics. The most common method for their synthesis is the vapor-liquid-solid growth, using gold as catalyst. After the growth, the metal remains on the Si-NW tip, representing an important issue, because Au creates deep traps in the Si band gap that deteriorate the device performance. The methods proposed so far to remove Au offer low efficiency, strongly oxidize the Si-NW sidewalls, or produce structural damage. A physical and chemical characterization of the as-grown Si-NWs is presented. A thin shell covering the Au tip and acting as a barrier is found. The chemical composition of this layer is investigated through high resolution transmission electron microscopy (TEM) coupled with chemical analysis; its formation mechanism is discussed in terms of atomic interdiffusion phenomena, driven by the heating/cooling processes taking place inside the eutectic-Si-NW system. Based on the knowledge acquired, a new efficient etching procedure is developed. The characterization after the chemical etching is also performed to monitor the removal process and the Si-NWs morphological characteristics, demonstrating the efficiency of the proposed method and the absence of modifications in the nanostructure.

Freestanding photocatalytic materials based on 3D graphene and polyporphyrins.

A new concept in the formulation of hybrid nanostructured materials combining high quality graphene 3D supported by Nickel foam and polyporphyrins for visible light photocatalytic application is here reported. Our innovative approach involves the development of a freestanding device able to: i) offer a high surface area to bind the photosensitizers by π-π interactions, and ii) enhance stability and photocatalytic efficiency by using cyclic porphyrin polymers. For these purposes, homo- and co-polymerization reactions by using different porphyrin (free or zinc complexed) monomers were performed. The microscopic structures and morphology of graphene polymer nanocomposites were investigated by using Scanning Electron Microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and Atomic Force Microscopy (AFM). Finally, photocatalytic activity under visible light irradiation of the obtained nanocomposites was tested, by using methylene blue (MB) as organic pollutant. The obtained data suggested that hindered cyclic polymeric structures stacked on graphene surface by non-covalent interactions, restrict the formation of non photoactive aggregates and, as a consequence, induce an enhancement of photocatalytic activity. Remarkably, our systems show a degradation efficiency in the visible-light range much higher than other similar devices containing nanoporphyrin units reported in literature.

Novel synthesis of ZnO/PMMA nanocomposites for photocatalytic applications.

The incorporation of nanostructured photocatalysts in polymers is a strategic way to obtain novel water purification systems. This approach takes the advantages of: (1) the presence of nanostructured photocatalyst; (2) the flexibility of polymer; (3) the immobilization of photocatalyst, that avoids the recovery of the nanoparticles after the water treatment. Here we present ZnO-polymer nanocomposites with high photocatalytic performance and stability. Poly (methyl methacrylate) (PMMA) powders were coated with a thin layer of ZnO (80 nm thick) by atomic layer deposition at low temperature (80 °C). Then the method of sonication and solution casting was performed so to obtain the ZnO/PMMA nanocomposites. A complete morphological, structural, and chemical characterization was made by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) analyses. The remarkable photocatalytic efficiency of the nanocomposites was demonstrated by the degradation of methylene blue (MB) dye and phenol in aqueous solution under UV light irradiation. The composites also resulted reusable and stable, since they maintained an unmodified photo-activity after several MB discoloration runs. Thus, these results demonstrate that the proposed ZnO/PMMA nanocomposite is a promising candidate for photocatalytic applications and, in particular, for novel water treatment.

Multi-Scale-Porosity TiO2 scaffolds grown by innovative sputtering methods for high throughput hybrid photovoltaics.

We propose an up-scalable, reliable, contamination-free, rod-like TiO2 material grown by a new method based on sputtering deposition concepts which offers a multi-scale porosity, namely: an intra-rods nano-porosity (1-5 nm) arising from the Thornton's conditions and an extra-rods meso-porosity (10-50 nm) originating from the spatial separation of the Titanium and Oxygen sources combined with a grazing Ti flux. The procedure is simple, since it does not require any template layer to trigger the nano-structuring, and versatile, since porosity and layer thickness can be easily tuned; it is empowered by the lack of contaminations/solvents and by the structural stability of the material (at least) up to 500 °C. Our material gains porosity, stability and infiltration capability superior if compared to conventionally sputtered TiO2 layers. Its competition level with chemically synthesized reference counterparts is doubly demonstrated: in Dye Sensitized Solar Cells, by the infiltration and chemisorption of N-719 dye (∼1 × 1020 molecules/cm3); and in Perovskite Solar Cells, by the capillary infiltration of solution processed CH3NH3PbI3 which allowed reaching efficiency of 11.7%. Based on the demonstrated attitude of the material to be functionalized, its surface activity could be differently tailored on other molecules or gas species or liquids to enlarge the range of application in different fields.

Spontaneous bidirectional ordering of CH3NH3(+) in lead iodide perovskites at room temperature: The origins of the tetragonal phase.

CH3NH3PbI3 is a hybrid organic-inorganic material with a perovskite structure and a temperature-dependent polymorphism whose origins are still unclear. Here we perform ab initio molecular dynamics simulations in order to investigate the structural properties and atom dynamics of CH3NH3PbI3 at room temperature. Starting from different initial configurations, we find that a single-crystalline system undergoes a spontaneous ordering process which brings the CH3NH3(+) ions to alternately point towards the center of two out of the six faces of the cubic PbI3(-) framework, i.e. towards the 〈100〉 and 〈010〉 directions. This bidirectional ordering gives rise to a preferential distortion of the inorganic lattice on the a-b plane, shaping the observed tetragonal symmetry of the system. The process requires tens of picoseconds for CH3NH3PbI3 supercells with just eight CH3NH3(+) ions.

Stability of solution-processed MAPbI3 and FAPbI3 layers.

We provide a semi-empirical model based on in situ degradation measurements to predict the durability of hybrid perovskite materials under simulated thermal operation conditions. In the model, the degradation path of MAPbI3 layers is proved to follow an Arrhenius-type law. The predictive role is played by the activation energy combined with its pre-exponential factor. Our comparative study under moisture conditions with respect to vacuum and nitrogen treatments has assessed the occurrence of an intrinsic dynamic exchange of protons between the organic cations and the inorganic cage with a direct impact on the lattice stability, for which the presence of water molecules is not mandatory. This mutual interaction produces defects inside the material and volatile species, such as HI, CH3NH2 or MAI, with an associated experimental activation energy of 1.54 eV measured under vacuum conditions in dark. This value is comparable to that calculated by the density functional theory for defect generation in MAPbI3. In air, the action of water molecules reduces the activation energy for proton exchanges in dark to 0.96 eV. As an alternative solution to increase the material stability, we demonstrate that the substitution of methylammonium (MA(+)) with the formamidinium (FA(+)) cations inside the inorganic cage gives greater robustness to the overall lattice and extends the material durability due to a different interaction between the organic molecules and the inorganic cage. This definitely supports the use of FAPbI3 in applications, provided its structure can be stabilized in the dark phase at room temperature.

Similar Structural Dynamics for the Degradation of CH3 NH3 PbI3 in Air and in Vacuum.

We investigate the degradation path of MAPbI3 (MA=methylammonium) films over flat TiO2 substrates at room temperature by means of X-ray diffraction, spectroscopic ellipsometry, X-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy. The degradation dynamics is found to be similar in air and under vacuum conditions, which leads to the conclusion that the occurrence of intrinsic thermodynamic mechanisms is not necessarily linked to humidity. The process has an early stage, which drives the starting tetragonal lattice in the direction of a cubic atomic arrangement. This early stage is followed by a phase change towards PbI2 . We describe how this degradation product is structurally coupled with the original MAPbI3 lattice through the orientation of its constituent PbI6 octahedra. Our results suggest a slight octahedral rearrangement after volatilization of HI+CH3 NH2 or MAI, with a relatively low energy cost. Our experiments also clarify why reducing the interfaces and internal defects in the perovskite lattice enhances the stability of the material.

Elusive Presence of Chloride in Mixed Halide Perovskite Solar Cells.

The role of chloride in the MAPbI3-xClx perovskite is still limitedly understood, albeit subjected of much debate. Here, we present a combined angle-resolved X-ray photoelectron spectroscopy (AR-XPS) and first-principles DFT modeling to investigate the MAPbI3-xClx/TiO2 interface. AR-XPS analyses carried out on ad hoc designed bilayers of MAPbI3-xClx perovskite deposited onto a flat TiO2 substrate reveal that the chloride is preferentially located in close proximity to the perovskite/TiO2 interface. DFT calculations indicate the preferential location of chloride at the TiO2 interface compared to the bulk perovskite due to an increased chloride-TiO2 surface affinity. Furthermore, our calculations clearly demonstrate an interfacial chloride-induced band bending, creating a directional "electron funnel" that may improve the charge collection efficiency of the device and possibly affecting also recombination pathways. Our findings represent a step forward to the rationalization of the peculiar properties of mixed halide perovskite, allowing one to further address material and device design issues.

Magnetostructural correlations in Tetrairon(III) single-molecule magnets.

Tunable single-molecule magnets: The spin-level landscape in a series of Fe(III) (4) single-molecule magnets with propeller-like structure was analyzed by means of high-frequency EPR spectroscopy. The zero-field splitting parameter D of the ground S=5 spin state correlates strongly with the pitch of the propeller gamma (see picture), and thus provides a simple link between molecular structure and magnetic behavior.We report three novel tetrairon(III) single-molecule magnets with formula [Fe(4)(L)(2)(dpm)(6)] (Hdpm=2,2,6,6-tetramethylheptane-3,5-dione), prepared by using pentaerythritol monoether ligands H(3)L=R'OCH(2)C(CH(2)OH)(3) with R'=allyl (1), (R,S)-2-methyl-1-butyl (2), and (S)-2-methyl-1-butyl (3), along with a new crystal phase of the complex containing H(3)L=11-(acetylthio)-2,2-bis(hydroxymethyl)- undecan-1-ol (4). High-frequency EPR (HF-EPR) spectra at low temperature were collected on powder samples in order to determine the zero-field splitting (zfs) parameters in the ground S=5 spin state. In 1-4 and in other eight isostructural compounds previously reported, a remarkable correlation is found between the axial zfs parameter D and the pitch gamma of the propeller-like structure. The relationship is directly demonstrated by 1, which features both structurally and magnetically inequivalent molecules in the crystal. The dynamics of magnetization has been investigated by ac susceptometry, and the results analyzed by master-matrix calculations. The large rhombicities of 2 and 3 were found to be responsible for the fast magnetic relaxation observed in the two compounds. However, complex 3 shows an additional faster relaxation mechanism which is unaccounted for by the set of spin Hamiltonian parameters determined by HF-EPR.