Improvement of Mechanical and Thermoelectric Properties of AgCuTe by Pinning Effect and Enhanced Liquid-Like Behavior via SiC Alloying.

With the development and application of thermoelectric (TE) devices, it requires not only high-performance of TE materials but also high mechanical properties. Here, we report a medium-temperature liquid material, AgCuTe, with high mechanical properties. The results demonstrate that AgCuTe possesses a multiphase structure characterized by abundant grain boundaries, resulting in reduced lattice thermal conductivity and inherently high mechanical strength. Furthermore, nano-SiC was alloyed into the AgCuTe material to further improve its mechanical and TE properties. Nano-SiC exhibited a button-like distribution within the grain boundaries, introducing a pinning effect that significantly elevated the Vickers hardness of the samples. Additionally, nano-SiC induced strong lattice distortion energy in the vicinity, which promotes Ag/Cu ions to escape from the lattice and enhances the liquid-like behavior of Ag/Cu ions. Finally, these enhancements led to a 21% improvement in the mechanical properties and a 40% improvement in the TE properties for AgCuTe. Notably, AgCuTe achieved its peak TE performance, with a latest peak ZT value of 1.32 at 723 K. This research expands the potential applications of AgCuTe.

Achieving Ultralow Lattice Thermal Conductivity and High Thermoelectric Performance in SnTe by Alloying with MnSb2Se4.

The manipulation of defect chemistry is crucial in the design of high-performance thermoelectric materials. Studies have demonstrated that alloying compounds within the I-V-VI2 family, such as AgSbTe2, NaSbTe2, etc., can effectively enhance the thermoelectric performance of SnTe by controlling the hole concentration and reducing the lattice thermal conductivity. In this paper, samples of SnTe alloyed with MnSb2Se4 were prepared, and the microstructure, electrical properties, and thermal properties were thoroughly investigated. Based on SEM and TEM analysis, it was observed that MnSb2Se4 can dissolve into SnTe during the preparation of the samples, which leads to the formation of various secondary phases with different compositions and point defects. Consequently, the lattice thermal conductivity is reduced to 0.44 W m-1 K-1 at 800 K, approaching the amorphous limit. Furthermore, the diffusion of the Mn and Sb elements leads to a significant improvement in the Seebeck coefficient through valence band convergence. The vacancy concentration in SnTe can also be modulated by alloying with MnSb2Se4. The findings indicated that MnSb2Se4 alloying can enhance the thermoelectric performance of SnTe through increasing the vacancy concentration, promoting valence band convergence, and introducing secondary phases. Consequently, a ZT value of 1.36 at 800 K for Sn1.03Te-5%MnSb2Se4 can be achieved.

Enhanced Thermoelectric Performance of Mg-Doped AgSbTe2 by Inhibiting the Formation of Ag2Te.

The existence of Ag2Te has always been an obstacle for p-type thermoelectric material AgSbTe2 to improve its thermoelectric performance. In this work, AgSb1-xMgxTe2 samples are synthesized by melting-slow-cooling and then spark plasma sintering (SPS). Through increasing the solubility of Ag2Te in the AgSbTe2 matrix by Mg doping, the formation of Ag2Te is inhibited. Density functional theory calculations confirm more valence bands are involved in electrical transport due to Mg doping. Therefore, the electrical conductivity of AgSb1-xMgxTe2 samples has been greatly improved due to the reduction of Ag2Te with n-type electrical conductivity. Moreover, the downward trend of ZT, which is caused by the structural transition of Ag2Te at about 418 K, disappears. Meanwhile, lattice defects form in the AgSb0.98Mg0.02Te2 sample, and Mg doping improves the configurational entropy change, resulting in a decrease in lattice thermal conductivity over the entire temperature range of measurement. Finally, a high ZT value of 1.31 at 523 K is achieved for the AgSb0.98Mg0.02Te2 sample. This study demonstrates that Mg doping can effectively improve AgSbTe2 thermoelectric performance by inhibiting the formation of the Ag2Te impurity phase.

Lactylome analysis suggests lactylation-dependent mechanisms of metabolic adaptation in hepatocellular carcinoma.

Enhanced glycolysis and accumulation of lactate is a common feature in various types of cancer. Intracellular lactate drives a recently described type of posttranslational modification, lysine lactylation (Kla), on core histones. However, the impact of lactylation on biological processes of tumour cells remains largely unknown. Here we show a global lactylome profiling on a prospectively collected hepatitis B virus-related hepatocellular carcinoma (HCC) cohort. Integrative lactylome and proteome analysis of the tumours and adjacent livers identifies 9,275 Kla sites, with 9,256 sites on non-histone proteins, indicating that Kla is a prevalent modification beyond histone proteins and transcriptional regulation. Notably, Kla preferentially affects enzymes involved in metabolic pathways, including the tricarboxylic acid cycle, and carbohydrate, amino acid, fatty acid and nucleotide metabolism. We further verify that lactylation at K28 inhibits the function of adenylate kinase 2, facilitating the proliferation and metastasis of HCC cells. Our study therefore reveals that Kla plays an important role in regulating cellular metabolism and may contribute to HCC progression.

Enhanced thermoelectric performance of In-doped and AgCuTe-alloyed SnTe through band engineering and endotaxial nanostructures.

Endotaxial nanostructures can reduce lattice thermal conductivity through enhancing phonon scattering without affecting electrical transport, leading to a high thermoelectric performance. On the other hand, band engineering can enhance electrical transport by improving the Seebeck coefficient through valence band convergence and the resonance level. In this paper, the synergistic effect of band engineering and endotaxial nanostructures was implemented in SnTe thermoelectric materials by alloying with AgCuTe and doping with Indium. The positron annihilation lifetime spectra show that the vacancy concentration in SnTe was reduced after alloying with AgCuTe, which led to a decreasing hole concentration and improved carrier mobility. Additionally, the diffusion of Ag in the matrix during the preparation can facilitate valence band convergence. Therefore, the power factor of SnTe is greatly increased to 18 µW cm-1 K-2 at 800 K, which can be further increased to 21.4 µW cm-1 K-2 at 800 K after In doping due to resonance level formation. Meanwhile, Cu2Te endotaxial nanostructures also can be observed in the TEM image after SnTe alloying with AgCuTe. So, the lattice thermal conductivity significantly reduced to 0.93 W m-1 K -1 in In-doped and AgCuTe-alloyed SnTe. Finally, we obtain an enhanced ZT value of 1.14 in Sn1.02In0.01Te-1%AgCuTe at 800 K.

The phycobilisome core-membrane linkers from Synechocystis sp. PCC 6803 and red-algae assemble in the same topology.

The phycobilisomes (PBSs) of cyanobacteria and red-algae are unique megadaltons light-harvesting protein-pigment complexes that utilize bilin derivatives for light absorption and energy transfer. Recently, the high-resolution molecular structures of red-algal PBSs revealed how the multi-domain core-membrane linker (LCM ) specifically organizes the allophycocyanin subunits in the PBS's core. But, the topology of LCM in these structures was different than that suggested for cyanobacterial PBSs based on lower-resolution structures. Particularly, the model for cyanobacteria assumed that the Arm2 domain of LCM connects the two basal allophycocyanin cylinders, whereas the red-algal PBS structures revealed that Arm2 is partly buried in the core of one basal cylinder and connects it to the top cylinder. Here, we show by biochemical analysis of mutations in the apcE gene that encodes LCM , that the cyanobacterial and red-algal LCM topologies are actually the same. We found that removing the top cylinder linker domain in LCM splits the PBS core longitudinally into two separate basal cylinders. Deleting either all or part of the helix-loop-helix domain at the N-terminal end of Arm2, disassembled the basal cylinders and resulted in degradation of the part containing the terminal emitter, ApcD. Deleting the following 30 amino-acids loop severely affected the assembly of the basal cylinders, but further deletion of the amino-acids at the C-terminal half of Arm2 had only minor effects on this assembly. Altogether, the biochemical data are consistent with the red-algal LCM topology, suggesting that the PBS cores in cyanobacteria and red-algae assemble in the same way.

Autophagy and Ubiquitin-Proteasome System Coordinate to Regulate the Protein Quality Control of Neurodegenerative Disease-Associated DCTN1.

Motor neuron diseases are neurodegenerative diseases that are characterized by degeneration of the upper and lower motor neurons in the central nervous system. Mutations in Dynactin 1 (DCTN1), a component in the Dynein/Dynactin motor complex, have been previously identified to cause motor neuron diseases and other neurodegenerative disorders. Recent studies showed that motor neuron disease-linked mutation, such as G59S mutation, could lead to dysfunction and protein aggregation of DCTN1. However, the cellular pathway involved in the clearance of DCTN1 aggregates is still not fully elucidated. In this study, we employed a culture cell model of DCTN1-linked neurodegeneration and explored the role of cellular protein control systems in the regulation of wild type and mutant DCTN1. We find that the ubiquitin-proteasome system, but not autophagy, is the primary protein degradation system for the turnover of both wild type and G59S DCTN1 under normal conditions. However, it turns out that autophagy can play a role in the clearance of protein aggregates of G59S DCTN1 when the proteasome activity is inhibited. Importantly, overexpression of TFEB, a master regulator of autophagy, promotes the autophagic clearance of G59S DCTN1 aggregates and ameliorates G59S DCTN1-induced cytotoxicity when the proteasomes are impaired. In conclusion, autophagy may play as a backup system to protect cells against the cytotoxicity induced by aggregate-prone DCTN1 when proteasomal function is damaged.

Protective role of phenylethanoid glycosides, Torenoside B and Savatiside A, in Alzheimer's disease.

The current study assessed the efficacy of two phenylethanoid glycosides (PhGs), Torenoside B (TB) and Savatiside A (SA), in the treatment of Alzheimer's disease (AD). The effects of TB and SA compounds were first assessed following amyloid beta (Aß)25-35 induction in SH-SY5Y cells at a range of concentrations. Their effects on cell viability and reactive oxygen species (ROS) were determined by performing MTT and dichlorofluorescin diacetate assays, respectively. The concentration of intracellular Ca2+ was determined using Fluo-3AM to stain SH-SY5Y cells. SA and TB treatments were also assessed in Aß25-35-induced mice. Y-maze and Morris water maze methods were utilized to assess murine learning and memory capability. The pathological changes of murine hippocampi was determined using H&E and Nissl staining. In addition, biochemical parameters associated with intracellular reactive oxygen pathways including Maleic dialdehyde (MDA), superoxide dismutase (SOD), glutathione peroxidase (GSH-Px), acetylcholinesterase (AChE) and Calnexin were also assessed. TB and SA treatment in Aß25-35-induced SH-SY5Y cells resulted in the restoration of cell morphology, an increase of SOD and GSH-Px activity, a decrease in ROS, Ca2+ and MDA content, and a decrease in Calnexin expression. Furthermore, SA or TB treatment administered to Aß25-35-induced mice improved their spatial/non-spatial learning and memory capabilities. The efficacy of treatment was also supported by a marked change in the morphological structure of pyramidal neurons in the CA1 areas of murine hippocampi, as well as an increase of SOD and GSH-Px activity. Treatment also resulted in a decrease in MDA content, AchE activity and Calnexin expression in murine hippocampal tissue. As potential AD treatment drugs, SA and TB compounds have been demonstrated to alleviate the oxidative stress induced by Aß25-35 via the regulation of intracellular calcium homeostasis and Calnexin, preventing AD development.

Dynasore Suppresses mTORC1 Activity and Induces Autophagy to Regulate the Clearance of Protein Aggregates in Neurodegenerative Diseases.

Autophagy is an important cellular protein control process, which plays a key role in the regulation of cell homeostasis and pathogenesis of many human diseases including neurodegenerative diseases. Reduced autophagic activity and abnormal protein aggregation are common features of neurodegenerative diseases, including Alzheimer's disease, Parkinson's disease, amyotrophic lateral sclerosis, and Huntington's disease. Therefore, pharmacological regulation of overall autophagy may be helpful for effective treatment of neurodegenerative diseases. In the present study, we find Dynasore, a potent inhibitor of dynamin, can repress the lysosomal localization of mTOR and block the activity of mTORC1, which in turn enhances the nuclear translocation of the master regulators of autophagy including TFE3 and TFEB. We find that autophagic flux is upregulated in Dynasore-treated cells. Moreover, treatment of Dynasore significantly promotes the clearance of protein aggregates formed by mutant huntingtin protein containing expanded polyglutamine (polyQ), but not damaged mitochondria. In contrast, treatment with Dynasore has no effect on the clearance of polyQ aggregates of mutant huntingtin in ATG5-depleted cells, in which autophagy is defective. Taken together, our results indicate that Dynasore affects autophagic degradation of neurodegenerative disease-associated proteins by regulating mTORC1-TFEB signaling.

Widely Linear Adaptive Instantaneous Frequency Estimation in Vector Hydrophones.

To solve the problem that the time-frequency resolution of Short-Time Fourier Transform (STFT) is constrained by the window length and the moving step of the short time window, and to utilize the merits of a widely linear method, a novel instantaneous frequency estimation method in vector hydrophone was proposed. In this paper, a complex variable was constructed. It is composed of sound pressure and particle velocity as its real part and imaginary part, respectively. The constructed variable was approved to be second order noncircular (improper). For the modelling of noncircular signals, the standard linear estimation is not adequate and the pseudo-covariance matrix should also be taken into consideration. As a result, a widely linear adaptive instantaneous frequency estimation algorithm and its three solutions based on the augmented complex least mean square (ACLMS) method are presented to estimate the instantaneous frequency in vector hydrophones. The results of simulations and laboratory experiments prove that this approach based on a widely linear model performs better compared to STFT and strict linear filter methods.

Stabilizing Metastable Polymorphs of Metal-Organic Frameworks via Encapsulation of Graphene Oxide and Mechanistic Studies.

Polymorphic transition from a metastable phase to a stable phase often occurs in metal-organic frameworks (MOFs) under the action of external stimuli. However, these transitions sometimes result in deteriorating their special performances and can even lead to serious safety problems. Therefore, developing a simple and efficient strategy for enhancing the stabilities of metastable MOF polymorphs is very imperative and meaningful. Herein, we propose a simple graphene oxide (GO)-encapsulating strategy for improving the stabilities of metastable MOF polymorphs. To illustrate this strategy, we designed and synthesized two polymorphic MOFs [MOF(ATA-a) and MOF(ATA-b)] as examples, which are based on energetic 5-amino-1 H-tetrazole as ligands. Single-crystal X-ray diffraction showed that these two polymorphs have a same chemical composition [Zn2(ATA)3(ATA)2/2] n, but different space groups, space systems, and different stacking modes of the neighboring ligands. As expected, the metastable polymorph [MOF(ATA-a)] underwent a complete polymorphic transition at room temperature to form its stable polymorph [MOF(ATA-b)]. Using the proposed strategy, we successfully encapsulated a small amount of GO in the metastable polymorph [GO⊂MOF(ATA-a)]. The resultant composite exhibited better chemical stability, extremely higher thermal stability, and larger Brunauer-Emmett-Teller surface area compared to both its precursor and the physically mixed analogue. Remarkably, its onset decomposition temperature ( Td) was as high as 377.4 °C, which is even higher than that of 1,3,5-triamino-2,4,6-trinitrobenzene ( Td = 321 °C), making it a potential heat-resistant explosive. The mechanism of stabilization was investigated in detail using various analytical techniques. This work may not only provide new insights into the stabilization of functional MOF polymorphs but also open up a new field for the application of GO.

High-Density Energetic Metal-Organic Frameworks Based on the 5,5'-Dinitro-2H,2'H-3,3'-bi-1,2,4-triazole.

High-energy metal-organic frameworks (MOFs) based on nitrogen-rich ligands are an emerging class of explosives, and density is one of the positive factors that can influence the performance of energetic materials. Thus, it is important to design and synthesize high-density energetic MOFs. In the present work, hydrothermal reactions of Cu(II) with the rigid polynitro heterocyclic ligands 5,5'-dinitro-2H,2'H-3,3'-bi-1,2,4-triazole (DNBT) and 5,5'-dinitro-3,3'-bis-1,2,4-triazole-1-diol (DNBTO) gave two high-density MOFs: [Cu(DNBT)(ATRZ)3]n (1) and [Cu(DNBTO)(ATRZ)2(H2O)2]n (2), where ATRZ represents 4,4'-azo-1,2,4-triazole. The structures were characterized by infrared spectroscopy, elemental analysis, ultraviolet-visible (UV) absorption spectroscopy and single-crystal X-ray diffraction. Their thermal stabilities were also determined by thermogravimetric/differential scanning calorimetry analysis (TG/DSC). The results revealed that complex 1 has a two-dimensional porous framework that possesses the most stable chair conformations (like cyclohexane), whereas complex 2 has a one-dimensional polymeric structure. Compared with previously reported MOFs based on copper ions, the complexes have higher density (ρ = 1.93 g cm-3 for complex 1 and ρ = 1.96 g cm-3 for complex 2) and high thermal stability (decomposition temperatures of 323 °C for complex 1 and 333.3 °C for complex 2), especially because of the introduction of an N-O bond in complex 2. We anticipate that these two complexes would be potential high-energy density materials.

Dynamic Crystallography Reveals Early Signalling Events in Ultraviolet Photoreceptor UVR8.

Arabidopsis thaliana UVR8 (AtUVR8) is a long-sought-after photoreceptor that undergoes dimer dissociation in response to UV-B light. Crystallographic and mutational studies have identified two crucial tryptophan residues for UV-B responses in AtUVR8. However, the mechanism of UV-B perception and structural events leading up to dimer dissociation remain elusive at the molecular level. We applied dynamic crystallography to capture light-induced structural events in photoactive AtUVR8 crystals. Here we report two intermediate structures at 1.67Å resolution. At the epicenter of UV-B signaling, concerted motions associated with Trp285/Trp233 lead to ejection of a water molecule, which weakens an intricate network of hydrogen bonds and salt bridges at the dimer interface. Partial opening of the ß-propeller structure due to thermal relaxation of conformational strains originating in the epicenter further disrupts the dimer interface and leads to dimer dissociation. These dynamic crystallographic observations provide structural insights into the photo-perception and signaling mechanism of UVR8.

Fabrication of microcavity-array superhydrophobic surfaces using an improved template method.

We fabricated the first superhydrophobic (SH) surface with microcavities, using a simple process. The process included an improved template method (ITM) for constructing the SH surface with cavities, using taro leaves as a pattern mask, and a dip-coating method for modifying the SH surface. The results obtained using the ITM are significantly better than those achieved using traditional template methods. In addition, the water-repellence of the microcavities surface was significantly enhanced by decorating with a layer of polymerized n-octadecylsiloxane nanosheets.