Coagulation factor content of plasma produced from whole blood stored for 24 hours at ambient temperature: results from an international multicenter BEST Collaborative study.

BACKGROUND: There is increasing international interest in producing components from blood that has been stored at room temperature for 24 hours. The lack of comprehensive data on the quality of plasma produced from blood stored in this way led to this international study. STUDY DESIGN AND METHODS: A total of 128 units of whole blood were pooled in groups of four and split to produce 32 sets of four identical blood units that were processed either within 8 hours of blood collection or after 24-hour storage at 18 to 25°C. RESULTS: Storage of whole blood for 24 hours resulted in a 23% decrease in the activity of Factor (F)VIII, but not significant loss of activity of coagulation factors FV, FVII, FXI, FXII, fibrinogen, antithrombin, or von Willebrand factor. There was a small, but significant decrease in levels of FII, FIX, and FX (all <5%) as well as protein C (6%) and free protein S activity (14%). The ability of plasma to generate thrombin after 24-hour storage as whole blood was unaltered, as assessed by real-time thrombin generation tests as was the rate and strength of clot formation by rotational thombelastometry. Levels of all coagulation factors measured were above 0.50 U/mL in plasma produced from whole blood stored for 24 hours. CONCLUSION: These data show that there is minimal effect of storing whole blood at ambient temperature for 24 hours on the coagulation activity of plasma and that this is an acceptable alternative to producing plasma on the day of blood collection.

In vitro function of buffy coat-derived platelet concentrates stored for 9 days in CompoSol, PASII or 100% plasma in three different storage bags.

BACKGROUND AND OBJECTIVES: The aim of the study was to compare the in vitro quality of buffy coat-derived platelet concentrates (PC) during extended storage in plasma or additive solution in three different storage bags. MATERIALS AND METHODS: A pooled and split design was chosen so that identical PCs were produced in either 100% plasma, 70% PASII : 30% plasma or 70% CompoSol : 30% plasma (n = 6 each). This was repeated for three different manufacturers' platelet storage bags (Fresenius, Baxter and Pall). PCs were sampled on days 1, 5, 7 and 9 of storage and tested in vitro using a variety of tests of platelet function. For each bag type, storage in PASII or Composol was compared with plasma (data taken across the entire storage period), and differences occurring with time were analysed for all storage media. RESULTS: The pH of all PCs was > 6.8 at day 9 of storage. In vitro platelet function, as assessed by markers of platelet activation and metabolism, of PCs stored in CompoSol appeared to be similar to that of PCs stored in plasma over 9 days of storage. In contrast, PCs stored in PASII tended to have significantly higher levels of platelet activation (almost a twofold increase in % platelets positive for CD62P by day 5) and lower hypotonic shock response (approximately 40%, by day 7) compared to either PCs stored in 100% plasma or 70% CompoSol. The magnitude of the differences observed between platelet storage media appeared to be dependent on the type of platelet storage bag with the highest degree of platelet activation and lowest hypotonic shock response values being observed in Fresenius bags in combination with PASII. CONCLUSIONS: The maintenance of platelet function in vitro during extended storage of PCs in platelet additive solutions is dependent on the combination of type of additive solution and type of platelet storage bag. For all bag types studied, storage in PASII resulted in poorer platelet function in vitro.

[Comparative study on the abrasion behavior of composite filling materials]. / Vergleichende Untersuchungen über das Abrasionsverhalten von Composite-Füllungsmaterialien.

Twenty-two commercially available composites, a new resin without inorganic filler and two amalgams have been investigated to compare their abrasive behaviour. In laboratory tests, an abrasion model of tooth against filling has been simulated. The results indicate a dependence of the abrasive behaviour on the type of filler in the different composites. Composites with quartz as filler have the greatest resistance to abrasion, whereas those with lithium-aluminium-silicate show the strongest abrasion. Mean abrasion values are obtained for the composites with barium-glass or a mixture of barium-glass and quartz as filler. The resin and the two amalgams have abrasion values comparable to the abrasive resistant composites.