RESUMO
The search for novel materials with enhanced characteristics for the advancement of flexible electronic devices and energy harvesting devices is currently a significant concern. Multiferroics are a prominent example of energy conversion materials. The magnetoelectric conversion in a flexible composite based on a piezopolymer layer and a magnetic elastomer layer was investigated. The study focused on investigating the dynamic magnetoelectric effect in various configurations of external alternating and constant homogeneous magnetic fields (L-T and T-T configurations). The T-T geometry exhibited a two orders of magnitude higher coefficient of the magnetoelectric effect compared to the L-T geometry. Mechanisms of structure bending in both geometries were proposed and discussed. A theory was put forward to explain the change in the resonance frequency in a uniform external field. A giant value of frequency tuning in a magnetic field of up to 362% was demonstrated; one of the highest values of the magnetoelectric effect yet recorded in polymer multiferroics was observed, reaching up to 134.3 V/(Oeâcm).
RESUMO
Multilayered magnetoelectric materials are of great interest for investigations due to their unique tuneable properties and giant values of magnetoelectric effect. The flexible layered structures consisting of soft components can reveal lower values of the resonant frequency for the dynamic magnetoelectric effect appearing in bending deformation mode. The double-layered structure based on the piezoelectric polymer polyvinylidene fluoride and a magnetoactive elastomer (MAE) with carbonyl iron particles in a cantilever configuration was investigated in this work. The gradient AC magnetic field was applied to the structure, causing the bending of the sample due to the attraction acting on the magnetic component. The resonant enhancement of the magnetoelectric effect was observed. The main resonant frequency for the samples depended on the MAE properties, namely, their thickness and concentration of iron particles, and was 156-163 Hz for a 0.3 mm MAE layer and 50-72 Hz for a 3 mm MAE layer; the resonant frequency depended on bias DC magnetic field as well. The results obtained can extend the application area of these devices for energy harvesting.
RESUMO
Multiferroics are materials that electrically polarize when subjected to a magnetic field and magnetize under the action of an electric field. In composites, the multiferroic effect is achieved by mixing of ferromagnetic (FM) and ferroelectric (FE) particles. The FM particles are prone to magnetostriction (field-induced deformation), whereas the FE particles display piezoelectricity (electrically polarize under mechanical stress). In solid composites, where the FM and FE grains are in tight contact, the combination of these effects directly leads to multiferroic behavior. In the present work, we considered the FM/FE composites with soft polymer bases, where the particles of alternative kinds are remote from one another. In these systems, the multiferroic coupling is different and more complicated in comparison with the solid ones as it is essentially mediated by an electromagnetically neutral matrix. When either of the fields, magnetic or electric, acts on the 'akin' particles (FM or FE) it causes their displacement and by that perturbs the particle elastic environments. The induced mechanical stresses spread over the matrix and inevitably affect the particles of an alternative kind. Therefore, magnetization causes an electric response (due to the piezoeffect in FE) whereas electric polarization might entail a magnetic response (due to the magnetostriction effect in FM). A numerical model accounting for the multiferroic behavior of a polymer composite of the above-described type is proposed and confirmed experimentally on a polymer-based dispersion of iron and lead zirconate micron-size particles.
RESUMO
The kinetics of hydrogen reduction of magnetite was investigated in different magnetic fields. The magnetic moment measurements in situ were used for the control of the reaction. A strong difference in the magnetic properties of the reaction results was obtained for applied strong and weak magnetic fields. The X-ray diffraction and Mössbauer spectra of the reduced samples confirmed their different composition. The mechanism of the magnetic field effect is discussed.
RESUMO
Barium hexaferrite powder samples with grains in the µm-range were obtained from solid-state sintering, and crystals with sizes up to 5 mm grown from PbO, Na2CO3, and BaB2O4 fluxes, respectively. Carbonate and borate fluxes provide the largest and structurally best crystals at significantly lower growth temperatures of 1533 K compared to flux-free synthesis (1623 K). The maximum synthesis temperature can be further reduced by the application of PbO-containing fluxes (down to 1223 K upon use of 80 at % PbO), however, Pb-substituted crystals Ba1-xPbxFe12O19 with Pb contents in the range of 0.23(2) ≤ x ≤ 0.80(2) form, depending on growth temperature and flux PbO content. The degree of Pb-substitution has only a minor influence on unit cell and magnetic parameters, although the values for Curie temperature, saturation magnetization, as well as the coercivity of these samples are significantly reduced in comparison with those from samples obtained from the other fluxes. Due to the lowest level of impurities, the samples from carbonate flux show superior quality compared to materials obtained using other methods.
