Carbon-Supported Ru-Ni and Ru-W Catalysts for the Transformation of Hydroxyacetone and Saccharides into Glycol-Derived Primary Amines.

Nitrogen-containing molecules are used for the synthesis of polymers, surfactants, agrochemicals, and dyes. In the context of green chemistry, it is important to form such compounds from bioresource. Short-chain primary amines are of interest for the polymer industry, like 2-aminopropanol, 1-aminopropan-2-ol, and 1,2-diaminopropane. These amines can be formed through the amination of oxygenated substrates, preferably in aqueous phase. This is possible with heterogeneous catalysts, however, effective systems that allow reactions under mild conditions are lacking. We report an efficient catalyst Ru-Ni/AC for the reductive amination of hydroxyacetone into 2-aminopropanol. The catalyst has been reused during 3 cycles demonstrating a good stability. As a prospective study, extension to the reactivity of (poly)carbohydrates has been realized. Despite a lesser efficiency, 2-aminopropanol (9 % yield of amines) has been formed from fructose, the first example from a carbohydrate. This was possible using a 7.5 %Ru-36 %WxC/AC catalyst, composition allowing a one-pot retro-aldol cleavage into hydroxyacetone and reductive amination. The transformation of cellulose through sequential reactions with a combination of 30 %W2C/AC and 7.5 %Ru-36 %WxC/AC system gave 2 % of 2-aminopropanol, corresponding to the first example of the formation of this amine from cellulose with heterogeneous catalysts.

Supported Molybdenum Carbide and Nitride Catalysts for Carbon Dioxide Hydrogenation.

Catalysts based on molybdenum carbide or nitride nanoparticles (2-5 nm) supported on titania were prepared by wet impregnation followed by a thermal treatment under alkane (methane or ethane)/hydrogen or nitrogen/hydrogen mixture, respectively. The samples were characterized by elemental analysis, volumetric adsorption of nitrogen, X-ray diffraction, and aberration-corrected transmission electron microscopy. They were evaluated for the hydrogenation of CO2 in the 2-3 MPa and 200-300°C ranges using a gas-phase flow fixed bed reactor. CO, methane, methanol, and ethane (in fraction-decreasing order) were formed on carbides, whereas CO, methanol, and methane were formed on nitrides. The carbide and nitride phase stoichiometries were tuned by varying the preparation conditions, leading to C/Mo and N/Mo atomic ratios of 0.2-1.8 and 0.5-0.7, respectively. The carbide activity increased for lower carburizing alkane concentration and temperature, i.e., lower C/Mo ratio. Enhanced carbide performances were obtained with pure anatase titania support as compared to P25 (anatase/rutile) titania or zirconia, with a methanol selectivity up to 11% at 250°C. The nitride catalysts appeared less active but reached a methanol selectivity of 16% at 250°C.

Supported Cobalt Catalysts for Acceptorless Alcohol Dehydrogenation.

The acceptor-less dehydrogenation of 2-octanol was tested over cobalt supported on Al2 O3 , C, ZnO, ZrO2 and various TiO2 substrates. The catalysts were characterized by ICP, XRD and TGA-H2 . For Co/TiO2 P25, the effects of passivation, aging (storage at room temperature), and in situ activation under H2 were investigated. The catalysts must be tested shortly after synthesis in order to prevent deactivation. Cobalt supported on TiO2 P25 was the most active and 69 % yield of 2-octanone was obtained, using decane as a solvent. Selectivities for 2-octanone were observed in the range of 90 % to 99.9 %. Small amounts of C16 compounds were also formed due to aldol condensation/dehydration reactions. The catalysts exhibited higher conversion in the dehydrogenation of secondary alcohols (65-69 %), in comparison to primary alcohols (2-10 %). The dehydrogenation of 1,2-octanediol led to 1-hydroxy-2-octanone, with a selectivity of 90 % and 69 % for Co/TiO2 P25 and Co/TiO2 P90, respectively.

Unravelling Platinum-Zirconia Interfacial Sites Using CO Adsorption.

Understanding platinum (Pt) speciation on catalysts is crucial for the design of atom-efficient materials and optimized formulations. The adsorption of carbon monoxide (CO) as a probe molecule is widely used to reveal Pt dispersion and structures, yet the assignment of IR bands is not straightforward, hindering determination of the nature of the surface sites or ensemble involved. CO adsorption was studied here over a zirconia-supported Pt catalyst. Specific sites at the interface between Pt and the support were highlighted, giving rise to an unusual band around 1660 cm-1 that could be confidently assigned to a Pt2-CO bridging carbonyl interacting head-on with a support surface hydroxyl. This adduct was yet unstable in the present conditions and was converted into a linear and bridged carbonyl bound only to Pt. Such sites are potentially important for bifunctional reactions requiring both metal and acid/base properties, particularly those occurring at the metal-support perimeter. Such adducts have probably been mistaken for carbonate-type species in many past contributions and could potentially represent crucial reaction intermediates for CO oxidation and the water-gas shift reaction.

Catalytic Response and Stability of Nickel/Alumina for the Hydrogenation of 5-Hydroxymethylfurfural in Water.

The catalytic response of Ni on Al2O3 obtained from Ni-Al layered double hydroxides was studied for the liquid-phase hydrogenation of hydroxymethyl furfural to tetrahydrofuran-2,5-diyldimethanol (THFDM) in water. The successive calcination and reduction of the precursors caused the removal of interlayer hydroxyl and carbonate groups and the reduction of Ni(2+) to Ni(0). Four reduced mixed oxide catalysts were obtained, consisting of different amount of Ni metal contents (47-68 wt%) on an Al-rich amorphous component. The catalytic activity was linked to Ni content whereas selectivity was mainly affected by reaction temperature. THFDM was formed in a stepwise manner at low temperature (353 K) whereas 3-hydroxymethyl cyclopentanone was generated at higher temperature. Coke formation caused deactivation; however, the catalytic activity can be regenerated using heat treatment. The results establish Ni on Al2O3 as a promising catalyst for the production of THFDM in water.

Encapsulation of an organometallic cationic catalyst by direct exchange into an anionic MOF.

Metal-Organic Frameworks (MOFs) are porous crystalline materials that have emerged as promising hosts for the heterogenization of homogeneous organometallic catalysts, forming hybrid materials which combine the benefits of both classes of catalysts. Herein, we report the encapsulation of the organometallic cationic Lewis acidic catalyst [CpFe(CO)2(L)]+ ([Fp-L]+, Cp = η5-C5H5, L = weakly bound solvent) inside the pores of the anionic [Et4N]3[In3(BTC)4] MOF (H3BTC = benzenetricarboxylic acid) via a direct one-step cation exchange process. To conclusively validate this methodology, initially [Cp2Co]+ was used as an inert spatial probe to (i) test the stability of the selected host; (ii) monitor the stoichiometry of the cation exchange process and (iii) assess pore dimensions, spatial location of the cationic species and guest-accessible space by single crystal X-ray crystallography. Subsequently, the quasi-isosteric [Fp-L]+ was encapsulated inside the pores via partial cation exchange to form [(Fp-L)0.6(Et4N)2.4][In3(BTC)4]. The latter was rigorously characterized and benchmarked as a heterogeneous catalyst in a simple Diels-Alder reaction, thus verifying the integrity and reactivity of the encapsulated molecular catalyst. These results provide a platform for the development of heterogeneous catalysts with chemically and spatially well-defined catalytic sites by direct exchange of cationic catalysts into anionic MOFs.