Chemical Sensors Generated on Wafer-Scale Epitaxial Graphene for Application to Front-Line Drug Detection.

Generation of large areas of graphene possessing high quality and uniformity will be a critical factor if graphene-based devices/sensors are to be commercialized. In this work, epitaxial graphene on a 2" SiC wafer was used to fabricate sensors for the detection of illicit drugs (amphetamine or cocaine). The main target application is on-site forensic detection where there is a high demand for reliable and cost-efficient tools. The sensors were designed and processed with specially configured metal electrodes on the graphene surface by utilizing a series of anchors where the metal contacts are directly connected on the SiC substrate. This has been shown to improve adhesion of the electrodes and decrease the contact resistance. A microfluidic system was constructed to pump solutions over the defined graphene surface that could then act as a sensor area and react with the target drugs. Several prototypic systems were tested where non-covalent interactions were used to localize the sensing components (antibodies) within the measurement cell. The serendipitous discovery of a wavelength-dependent photoactivity for amphetamine and a range of its chemical analogs, however, limited the general application of these prototypic systems. The experimental results reveal that the drug molecules interact with the graphene in a molecule dependent manner based upon a balance of π -stacking interaction of the phenyl ring with graphene (p-doping) and the donation of the amine nitrogens lone pair electrons into the π - π *-system of graphene (n-doping).

Measurement of fluorescence in a rhodamine-123 doped self-assembled "giant" mesostructured silica sphere using a smartphone as optical hardware.

The blue OLED emission from a mobile phone was characterised, revealing a sharp emission band centred at λ = 445 nm with a 3dB bandwidth Δλ ∼ 20 nm. It was used to excite Rhodamine 123 doped within a "giant" mesostructured silica sphere during fabrication through evaporative self-assembly of silica nanoparticles. Fluorescence was able to be detected using a standard optical microscope fitted with a green transmission pass filter and cooled CCD and with 1 ms exposure time demonstrating the potential of mobile platforms as the basis for portable diagnostics in the field.

Porphyrin-doped solgel-lined structured optical fibers for local and remote sensing.

We constructed a type of sensor by depositing a solgel layer within the interior holes of a silica-structured fiber and, subsequently, coating this with an acid-responsive porphyrin. Protonation of the porphyrin by an acidic gas (HCl in this case), is detected by a large change in the visible spectrum. Compared to previous work on a liquid-core sensor in a structured optical fiber, the signal-to-noise ratio of this gas sensor shows a reduced signal strength, but the detection rate is increased about fortyfold.

Stitch error effect on group-delay ripple for long chirped fiber Bragg gratings.

Different sources of stitch errors are identified and simulated in a 200 mm long chirped grating. In each case, the effect on the group-delay ripple and transmission spectrum is investigated. The anticipated response in a typical 10 Gbit/s transmission system is specifically considered. From the simulations, it is clear that information about error source and magnitude can be gained directly from the transmission spectrum.

Fabrication of advanced fiber Bragg gratings by use of sequential writing with a continuous-wave ultraviolet laser source.

We present a novel scheme based on sequential writing for fabrication of advanced fiber Bragg gratings. As opposed to earlier sequential methods this technique uses a cw UV laser source and allows for very precise control and repetitivity of the formation of the gratings. Furthermore it is possible to use high average irradiances without destroying the fiber, resulting in considerable reduction in fabrication time for complex gratings. The method has been applied to several test gratings, which proved its versatility and quality.