Enhanced solubility of methyl ester sulfonates below their Krafft points in mixed micellar solutions.

HYPOTHESIS: Methyl ester sulfonates (MES) show limited water solubility at lower temperatures (Krafft point). One way to increase their solubility below their Krafft points is to incorporate them in anionic surfactant micelles. The electrostatic interactions between the ionic surfactant molecules and charged micelles play an important role for the degree of MES solubility. EXPERIMENTS: The solubility and electrolytic conductivity for binary and ternary surfactant mixtures of MES with anionic sodium alpha olefin sulfonate (AOS) and sodium lauryl ether sulfate with two ethylene oxide groups (SLES-2EO) at 5 °C during long-term storage were measured. Phase diagrams were established; a general phase separation theoretical model for their explanation was developed and checked experimentally. FINDINGS: The binary and ternary phase diagrams for studied surfactant mixtures include phase domains: mixed micelles; micelles + crystallites; crystallites, and molecular solution. The proposed general phase separation model for ionic surfactant mixtures is convenient for construction of such complex phase diagrams and provides information on the concentrations of all components of the complex solution and on the micellar electrostatic potential. The obtained maximal MES mole fraction of transparent micellar solutions could be of interest to increase the range of applicability of MES-surfactants.

Acyl chain length tuning improves antimicrobial potency and biocompatibility of short designed lipopeptides.

HYPOTHESIS: Designed antimicrobial lipopeptides (ALPs) offer the attractive benefits of short peptide sequences and flexible tuning of amphiphilicity by altering the acyl chain length. These lipopeptides kill microbes by forming intriguing in-membrane nanostructures and causing the leakage of internal contents. However, how subtle differences in the molecular structures of the lipopeptides affect their antimicrobial efficacy and biocompatibility to host cells is still under-investigated. EXPERIMENTS: This work focuses on assessing changes in the acyl chain length of CH3(CH2)n-2CO-KKKIII-NH2 (n = 10, 12 and 14, K = lysine, I = isoleucine, denoted as CnKI3) on the antimicrobial potency and cytotoxicity by combining biological assays with physical measurements. Aggregation properties were characterized by changes in critical aggregation concentration (CAC) from surface tension measurements. Antimicrobial susceptibility tests, cytotoxic MTT assays, haemolytic tests, and dynamic bactericidal experiments were employed to reveal their bioactive potency toward different types of cells. To further investigate lipopeptides' underlying antimicrobial and cytotoxic mechanisms, lipid monolayer and lipid small unilamellar vesicle (SUV) models were established and biophysically characterized. FINDINGS: An increase in n led to the decrease in the CAC of CnKI3, showing a rising membrane-lytic power. Subsequent bioactive measurements revealed the optimal performance of C12KI3 from this series of lipopeptides. The selective membrane binding behaviour was well supported by neutron reflection data from charged lipid monolayer models, revealing membrane-supported nanostructures of ALPs. However, increased membrane-lytic actions in C14KI3 led to notably increased toxicity and reduced selectivity. On the other hand, C14KI3 can impose faster dynamic killing than natural lipopeptide polymyxin B, showing the distinct impact of the amphiphilic balance from the designed lipopeptide. In contrast, the distinctly weaker binding to zwitterionic membrane models (monolayers and SUVs) provided direct nanoscale structural evidence to the mildness of the designed ALPs on host cells. This work demonstrates the high selectivity and fast killing of rationally designed short ALPs to microbes via in-membrane nanostructuring.

Structural features of interfacially adsorbed acyl-l-carnitines.

HYPOTHESIS: Acyl-l-carnitines (CnLCs) are potentially important as biosurfactants in drug delivery and tissue engineering due to their good biocompatibility. However, little is currently known about the basic interfacial behavior underlying their technological applications. Following our previous characterization of their solution aggregation and adsorption at the air/water interface, this work examines how they adsorb at the hydrophilic solid/liquid interface. EXPERIMENTS: As the SiO2/water interface has served as the model substrate for many interfacial adsorption studies, so it has been used in this work as the solid substrate to facilitate dynamic adsorption by spectroscopic ellipsometry (SE) and structural determination of the adsorbed layers by neutron reflection (NR) under different conditions at the SiO2/water interface from a group of CnLC (n = 12, 14, and 16). FINDINGS: CnLC surfactants are zwitterionic at neutral pH. They reached saturated adsorption above their critical micellar concentrations (CMCs) and formed a sandwich bilayer with a head-tail-head structure at the hydrophilic SiO2/water interface. The total thicknesses of the adsorbed layers at CMC were found to be 33 ± 2, 35 ± 2, and 37 ± 2 Å for C12LC, C14LC, and C16LC, respectively, with their inner and outer head layers remaining similar but the thickness of the interdigitated middle layer increasing with acyl chain length. As the solution becomes acidic, the carboxyl groups become protonated and the l-carnitine heads are net positively charged, resulting in increased repulsion between the head groups. In this situation, the CnLC surfactants are adsorbed as distinct aggregates to reduce repulsive interaction, resulting in reduced surfactant volume fraction and layer thickness. However, a high ionic strength can screen the repulsive interaction and enhance the adsorbed amount, effectively diminishing the impact of pH. This information provides a useful basis for exploring the technological applications of CnLCs involving a solid substrate.

In-Membrane Nanostructuring of Cationic Amphiphiles Affects Their Antimicrobial Efficacy and Cytotoxicity: A Comparison Study between a De Novo Antimicrobial Lipopeptide and Traditional Biocides.

Cationic biocides have been widely used as active ingredients in personal care and healthcare products for infection control and wound treatment for a long time, but there are concerns over their cytotoxicity and antimicrobial resistance. Designed lipopeptides are potential candidates for alleviating these issues because of their mildness to mammalian host cells and their high efficacy against pathogenic microbial membranes. In this study, antimicrobial and cytotoxic properties of a de novo designed lipopeptide, CH3(CH2)12CO-Lys-Lys-Gly-Gly-Ile-Ile-NH2 (C14KKGGII), were assessed against that of two traditional cationic biocides CnTAB (n = 12 and 14), with different critical aggregation concentrations (CACs). C14KKGGII was shown to be more potent against both bacteria and fungi but milder to fibroblast host cells than the two biocides. Biophysical measurements mimicking the main features of microbial and host cell membranes were obtained for both lipid monolayer models using neutron reflection and small unilamellar vesicles (SUVs) using fluorescein leakage and zeta potential changes. The results revealed selective binding to anionic lipid membranes from the lipopeptide and in-membrane nanostructuring that is distinctly different from the co-assembly of the conventional CnTAB. Furthermore, CnTAB binding to the model membranes showed low selectivity, and its high cytotoxicity could be attributed to both membrane lysis and chemical toxicity. This work demonstrates the advantages of the lipopeptides and their potential for further development toward clinical application.

How do chain lengths of acyl-l-carnitines affect their surface adsorption and solution aggregation?

HYPOTHESIS: l-carnitines in our body systems can be readily converted into acyl-l-carnitines which have a prominent place in cellular energy generation by supporting the transport of long-chain fatty acids into mitochondria. As biocompatible surfactants, acyl-l-carnitines have potential to be useful in technical, personal care and healthcare applications. However, the lack of understanding of the effects of their molecular structures on their physical properties has constrained their potential use. EXPERIMENTS: This work reports the study of the influence of the acyl chain lengths of acyl-l-carnitines (CnLC) on solubility, surface adsorption and aggregation. Critical micellar concentrations (CMCs) of CnLC were determined by surface tension measurements. Neutron reflection (NR) was used to further examine the structure and composition of the adsorbed CnLC layer. The structural changes of the micellar aggregates under different concentrations of CnLC, pH and ionic strength were determined by dynamic light scattering (DLS) and small angle neutron scattering (SANS). FINDINGS: C12LC is fully soluble over a wide temperature and concentration range. There is however a strong decline of solubility with increasing acyl chain length. The adsorption and aggregation behavior of C14LC was therefore studied at 30 °C and C16LC at 45 °C. The solubility boundaries displayed distinct hysteresis with respect to heating and cooling. The CMCs of C12LC, C14LC and C16LC at pH 7 were 1.1 ± 0.1, 0.10 ± 0.02 and 0.010 ± 0.005 mM, respectively, with the limiting values of the area per molecule at the CMC being 45.4 ± 2, 47.5 ± 2 and 48.8 ± 2 Å2 and the thicknesses of the adsorbed CnLC layers at the air/water interface increasing from 21.5 ± 2 to 22.6 ± 2 to 24.2 ± 2 Å, respectively. All three surfactants formed core-shell spherical micelles with comparable dimensional parameters apart from an increase in core radius with acyl chain length. This study outlines the effects of acyl chain length on the physicochemical properties of CnLCs under different environmental conditions, serving as a useful basis for developing their potential applications.

Solubility of ionic surfactants below their Krafft point in mixed micellar solutions: Phase diagrams for methyl ester sulfonates and nonionic cosurfactants.

HYPOTHESIS: Many ionic surfactants with wide applications in personal-care and house-hold detergency show limited water solubility at lower temperatures (Krafft point). This drawback can be overcome by using mixed solutions, where the ionic surfactant is incorporated in mixed micelles with another surfactant, which is soluble at lower temperatures. EXPERIMENTS: The solubility and electrolytic conductivity for a binary surfactant mixture of anionic methyl ester sulfonates (MES) with nonionic alkyl polyglucoside and alkyl polyoxyethylene ether at 5 °C during long-term storage were measured. Phase diagrams were established; a general theoretical model for their explanation was developed and checked experimentally. FINDINGS: The binary and ternary phase diagrams for studied surfactant mixtures include phase domains: mixed micelles; micelles + crystallites; crystallites, and molecular solution. The proposed general methodology, which utilizes the equations of molecular thermodynamics at minimum number of experimental measurements, is convenient for construction of such phase diagrams. The results could increase the range of applicability of MES-surfactants with relatively high Krafft temperature, but with various useful properties such as excellent biodegradability and skin compatibility; stability in hard water; good wetting and cleaning performance.

Surface adsorption and solution aggregation of a novel lauroyl-l-carnitine surfactant.

HYPOTHESIS: l-carnitine plays a crucial role in the cellular production of energy by transporting fatty acids into mitochondria. Acylated l-carnitines are amphiphilic and if appropriate physical properties were demonstrated, they could replace many currently used surfactants with improved biocompatibility and health benefits. EXPERIMENTS: This work evaluated the surface adsorption of lauroyl-l-carnitine (C12LC) and its aggregation behavior. The size and shape of the aggregates of C12LC surfactant were studied at different temperatures, concentrations, pH and ionic strength by dynamic light scattering (DLS) and small-angle neutron scattering (SANS). Surface tension measurements were carried out to determine the critical micellar concentration (CMC) of C12LC. Combining with the Gibbs equation, the surface excess at different concentrations could be determined. Neutron reflection (NR) was used to determine the structure of the adsorbed layer at the air/water interface with the help of isotopic contrast variations. FINDINGS: At pH 7, the limiting area per molecule (ACMC) of the zwitterionic C12LC adsorbed layer at the air/water interface was found to be 46 Å2 from surface tension and neutron reflection, smaller than the values of C12PC, C12E5, DTAB, C12C4betaine and C12C8betaine but close to that of SDS. A pronounced surface tension minimum at pH 2 at the low ionic strength was linked to a minimum value of area per molecule of about 30 Å2, indicating the competitive adsorption from traces of lauric acid produced by hydrolysis of C12LC. As the concentration increased, area per molecule reached a plateau of 37-39 Å2, indicating the dissolution of the more surface-active lauric acid into the micelles of C12LC. DLS and SANS showed that the size and shape of micelles had little response to temperature, concentration, ionic strength or pH. The SANS profiles measured under 3 isotopic contrasts could be well fitted by the core-shell model, giving a spherical core radius of 15.7 Å and a shell thickness of 10.5 Å. The decrease of pH led to more protonated carboxyl groups and more positively charged micelles, but the micellar structures remained unchanged, in spite of their stronger interaction. These features make C12LC potentially attractive as a solubilizing agent.

α-Sulfo alkyl ester surfactants: Impact of changing the alkyl chain length on the adsorption, mixing properties and response to electrolytes of the tetradecanoate.

HYPOTHESIS: The α-sulfo alkyl ester, AES, surfactants are a class of anionic surfactants which have potential for improved sustainable performance in a range of applications, and an important feature is their enhanced tolerance to precipitation in the presence of multivalent counterions. It is proposed that their adsorption properties can be adjusted substantially by changing the length of the shorter alkyl chain, that of the alkanol group in the ester. EXPERIMENTS: Surface tension and neutron reflectivity have been used to investigate the variation in the adsorption properties with the shorter alkyl chain length (methyl, ethyl and propyl), the impact of NaCl on the adsorption, the tendency to form surface multilayer structures in the presence of AlCl3, and the effects of mixing the methyl ester sulfonate with the ethyl and propyl ester sulfonates on the adsorption. FINDINGS: The variations in the critical micelle concentration, CMC, the adsorption isotherms, the saturation adsorption values, and the impact of NaCl illustrate the subtle influence of varying the shorter alkyl chain length of the surfactant. The non-ideal mixing of pairs of AES surfactants with different alkanol group lengths of the ester show that the extent of the non-ideality changes as the difference in the alkanol length increases. The surface multilayer formation observed in the presence of AlCl3 varies in a complex manner with the length of the short chain and for mixtures of surfactants with different chains lengths.

Effect of equilibrium pH on the structure and properties of bleach-damaged human hair fibers.

Hair proteins are significantly affected by environmental pH. This impact tends to increase with prior hair damage. To understand how pH affects bleached hair properties, we utilized a number of techniques allowing for the determination of hair thermal properties, swelling and water sorption, and dry and wet tensile properties. At pH 5, hair proteins had the best structural integrity, as determined by differential scanning calorimetry and the highest tensile modulus. At pH 10, protein cross-linking density decreased, water content and hair cross-sectional diameter increased. Alkaline treatment, when compared with pH 5, did not reduce intermediate filament conditions (evaluated via enthalpy measurement) nor mechanical property performance in the wet state. In contrast to alkaline-treated hair, bleached hair equilibrated at pH 3 behaved very differently: it contained two different crosslink density zones, was the least stiff in dry and stiffest in wet conditions. Additionally, it absorbed less water and had the lowest diameter because of reduced water binding by protonated carboxyl groups. The pH 3 to 10 did not affect the mechanical strength of bleached hair in dry or wet conditions.

Vortex in liquid films from concentrated surfactant solutions containing micelles and colloidal particles.

HYPOTHESIS: New dynamic phenomena can be observed in evaporating free liquid films from colloidal solutions with bimodal particle size distribution. Such distributions are formed in a natural way in mixed (slightly turbid) solutions of cationic and anionic surfactants, where nanosized micelles coexist with micronsized precipitated particles. EXPERIMENT: Without evaporation of water, the films thin down to thickness < 100 nm. Upon water evaporation from the film, one observes spontaneous film thickening (above 300 nm) and appearance of a dynamic vortex with a spot of thinner film in the center. The vortex wall has a stepwise profile with step-height equal to the effective micelle diameter (ca. 8 nm) and up to 20-30 stratification steps. RESULTS: For thicknesses greater than 100 nm, stratification in foam films from micellar solutions has never been observed so far. It evidences for the formation of a thick colloidal crystal of micelles in the evaporating film. The role of the bigger, micronsized particles is to form a filtration cake in the Plateau border, which supports the thick film. The developed quantitative mechanical model shows that the stepwise vortex profile is stabilized by the balance of hydrodynamic and surface tension forces. Vortex is observed not only in films from catanionic surfactant solutions, but also in films from silica and latex particle suspensions, which contain smaller surfactant micelles.

Rheology of mixed solutions of sulfonated methyl esters and betaine in relation to the growth of giant micelles and shampoo applications.

This is a review article on the rheological properties of mixed solutions of sulfonated methyl esters (SME) and cocamidopropyl betaine (CAPB), which are related to the synergistic growth of giant micelles. Effects of additives, such as fatty alcohols, cocamide monoethanolamine (CMEA) and salt, which are expected to boost the growth of wormlike micelles, are studied. We report and systematize the most significant observed effects with an emphasis on the interpretation at molecular level and understanding the rheological behavior of these systems. The experiments show that the mixing of SME and CAPB produces a significant rise of viscosity, which is greater than in the mixed solutions of sodium dodecyl sulfate and CAPB. The addition of fatty alcohols, CMEA and cationic polymer, leads to broadening of the synergistic peak in viscosity without any pronounced effect on its height. The addition of NaCl leads to a typical salt curve with high maximum, but in the presence of dodecanol this maximum is much lower. At lower salt concentrations, the fatty alcohol acts as a thickener, whereas at higher salt concentrations - as a thinning agent. Depending on the shape of the frequency dependences of the measured storage and loss moduli, G' and G", the investigated micellar solutions behave as systems of standard or nonstandard rheological behavior. The systems with standard behavior obey the Maxwell viscoelastic model (at least) up to the crossover point (G' = G") and can be analyzed in terms of the Cates reptation-reaction model. The systems with nonstandard rheological behavior obey the Maxwell model only in a restricted domain below the crossover frequency; they can be analyzed in the framework of an augmented version of the Maxwell model. The methodology for data analysis and interpretation could be applied to any other viscoelastic micellar system.

The structure of alkyl ester sulfonate surfactant micelles: The impact of different valence electrolytes and surfactant structure on micelle growth.

The ester sulfonate anionic surfactants are a potentially valuable class of sustainable surfactants. The micellar growth, associated rheological changes, and the onset of precipitation are important consequences of the addition of electrolyte and especially multi-valent electrolytes in anionic surfactants. Small angle neutron scattering, SANS, has been used to investigate the self-assembly and the impact of different valence electrolytes on the self-assembly of a range of ester sulfonate surfactants with subtly different molecular structures. The results show that in the absence of electrolyte small globular micelles form, and in the presence of NaCl, and AlCl3 relatively modest micellar growth occurs before the onset of precipitation. The micellar growth is more pronounced for the longer unbranched and branched alkyl chain lengths. Whereas changing the headgroup geometry from methyl ester to ethyl ester has in general a less profound impact. The study highlights the importance of relative counterion binding strengths and shows how the surfactant structure affects the counterion binding and hence the micelle structure. The results have important consequences for the response of such surfactants to different operational environments.

Oral Supplementation of Tocotrienol-Rich Fraction Alleviates Severity of Ulcerative Colitis in Mice.

Ulcerative colitis (UC) is characterized by damaged colonic mucosa and submucosa layers that are caused by excessive inflammatory reactions and oxidative stress. This study aimed to examine the use of tocotrienol-rich fraction (TRF) in mitigating damages caused by UC on the colon epithelium. Dextran sulfate sodium (DSS)-induced UC mice were treated with vehicle control, TRF, alpha-tocopherol (αTP) and 5-aminosalicylic acid (5-ASA). Observable clinical signs, quality of stool, histopathological scoring, inflammatory and oxidative markers were assessed. Vitamin E levels of colons and plasma were quantified. Oral supplementation of TRF significantly reduced the severity of DSS-induced UC by lowering the disease activity index (DAI) and histopathological inflammatory scoring. TRF also attenuated the DSS-induced enlargement of spleen and shortening of the colon. TRF has demonstrated marked anti-inflammatory and antioxidative properties indicated by the attenuation of DSS-induced upregulation of inflammation and oxidative stress markers including interleukin (IL)-6, IL-17, tumor necrosis factor (TNF)-α, myeloperoxidase (MPO), cyclooxygenase-2 (COX-2), nitric oxide (NO), malondialdehyde (MDA) and pNF-κB. These improvements were similar to that of 5-aminosalicylic acid (5-ASA) treatment. In contrast, αTP did not demonstrate evident clinical and histopathological improvements. The superior protective effect of TRF may be ascribed to the preferential absorption of TRF by the gut mucosa. TRF alleviated the signs and symptoms of acute UC in murine model via the reduction of local inflammatory reactions and oxidative stress. These effects suggested that TRF could serve as a gut health supplement for preventive measures for UC condition in patients.

Impact of molecular structure, headgroup and alkyl chain geometry, on the adsorption of the anionic ester sulfonate surfactants at the air-solution interface, in the presence and absence of electrolyte.

The transition from monolayer to multilayer adsorption at the air-water interface in the presence of multivalent counterions has been demonstrated for a limited range of anionic surfactants which exhibit increased tolerance to precipitation in the presence of multivalent counterions. Understanding the role of molecular structure in determining the transition to surface ordering is an important aspect of the phenomenon. The focus of the paper is on the alkyl ester sulfonate, AES, surfactants; a promising group of anionic surfactants, with the potential for improved performance and biocompatibility. Neutron reflectivity measurements were made in aqueous solution and in the presence of NaCl, CaCl2, MgCl2 and AlCl3, for a range of alkyl ester sulfonate surfactants, in which the headgroup and alkyl chain geometries were manipulated. In the regions of monolayer adsorption changing the AES headgroup and alkyl chain geometries results in an increased saturation adsorption and in a more gradual decrease in the adsorption at low concentrations, consistent with a greater adsorption efficiency. Changing the AES headgroup and alkyl chain geometries also results in changes in the transition from monolayer adsorption to more ordered surface structures with the addition of AlCl3 and mixed multivalent electrolytes. A more limited surface layering is observed for the ethyl ester sulfonate, EES, with a C14 alkyl chain. Replacing the C14 alkyl chain with a C18 isostearic chain results in only monolayer adsorption. The results demonstrate the role and importance of the surfactant molecular structure in determining the nature of the surface adsorption in the presence of different electrolytes, and in the tendency to form extended surface multilayer structures.

The role of competitive counterion adsorption on the electrolyte induced surface ordering in methyl ester sulfonate surfactants at the air-water interface.

The strong binding of Al3+ trivalent counterions to the anionic surfactants sodium polyethylene glycol monoalkyl ether sulfate and α-methyl ester sulfonate results in surface multilayer formation at the air-water interface. In contrast the divalent and monovalent counterions Ca2+ and Na+ result only in monolayer adsorption. Competitive counterion adsorption has been extensively studied in the context of surfactant precipitation and re-dissolution, but remains an important feature in understanding this surface ordering and how it can be manipulated. The α-methyl ester sulfonate surfactants are a promising class of anionic surfactants which have much potential for improved performance in many applications, greater tolerance to extreme solvent conditions such as water hardness, biocompatibility and sustainable production. Hence in this study we have used neutron reflectivity to extend previous studies on the surface ordering of the α-methyl ester sulfonate surfactant, sodium tetradecanoic 2-sulfo 1-methyl ester, in the presence of electrolyte to investigate the role of binary mixtures of electrolytes, AlCl3/CaCl2, and AlCl3/MgCl2. In the mixed electrolytes the evolution of the surface structure, from monolayer to multilayer with increasing AlCl3 concentration, is observed. It is broadly similar to that reported for the addition of only AlCl3. However with increasing CaCl2 concentration the structural evolution is shifted progressively to higher AlCl3 concentrations. Similar observations occur for the AlCl3/MgCl2 mixtures. However the presence of the MgCl2 results in an additional phenomenon; the partial co-adsorption of a more compact lamellar structure which exists until the highest AlCl3 concentrations. The results demonstrate the importance of the competitive adsorption of different counterions in driving and controlling the formation of surface multilayer structures with anionic surfactants. Furthermore it offers a facile route to the manipulation of these surface structures.

Properties of the micelles of sulfonated methyl esters determined from the stepwise thinning of foam films and by rheological measurements.

HYPOTHESES: The micellar solutions of sulfonated methyl esters (SME) are expected to form stratifying foam films that exhibit stepwise thinning. From the height of the steps, which are engendered by micellar layers confined in the films, we could determine the micelle aggregation number, surface electric potential, and ionization degree. Moreover, addition of the zwitterionic surfactant cocamidopropyl betaine (CAPB) is expected to transform the small spherical micelles of SME into giant wormlike aggregates. EXPERIMENTS: Stratifying films from SME solutions are formed and the heights of the steps are recorded. The viscosity of mixed SME + CAPB solutions is measured at various concentrations and weight ratios of the two surfactants. FINDINGS: By theoretical analysis of the foam film data, we established that at 30-100 mM SME spherical micelles are formed and their aggregation number was determined. The addition of calcium ions, as in hard water, does not produce significant effect. However, SME and CAPB exhibit a strong synergism with respect to micelle growth as indicated by the high solution's viscosity. For this reason, the SME + CAPB mixtures represent a promising system for formulations in personal-care and house-hold detergency, having in mind also other useful properties of SME, such as high hard water tolerance, biodegradability and skin compatibility.

Membrane-lytic actions of sulphonated methyl ester surfactants and implications to bactericidal effect and cytotoxicity.

Surfactants are multifunctional molecules widely used in personal care and healthcare formulations to cleanse, help disperse active ingredients (e.g., forming emulsions) and stabilise products. With increasing demands on improving biosafety, there is now mounting pressure to understand how different surfactants elicit toxicities at molecular and cellular levels. This work reports the membrane-lytic behaviour of a group of sulphonated methyl ester (SME) surfactants together with representative conventional surfactants. All surfactants displayed the clear rise of lysis of the model lipid bilayer membranes around their CMCs, but the two ionic surfactants SDS and C12TAB even caused measurable lysis below their CMCs, with membrane-lytic actions increasing with monomer concentration. Furthermore, whilst ionic and nonionic surfactants could achieve full membrane lysis once above their CMCs, this ability was weak from the SME surfactants and decreased with increasing the acyl chain length. In contrast to the conventional anionic surfactants such as SDS and SLES, the protein solubilizing capability of the SME surfactants was also low. On the other hand, MTT assays against 3T3 fibroblast cells and human chondrocyte cells revealed high toxicity from SDS and C12TAB against the other surfactants studied, but the difference between SME and the rest of conventional surfactants was small. Similar behaviour was also observed in their bactericidal effect against E. coli and S. aureus. The trend is broadly consistent with their membrane-lytic behaviour, indicating little selectivity in their cytotoxicity and bactericidal action. These results thus reveal different toxicities implicated from different surfactant head groups. Increase in acyl chain length as observed from SME surfactants could help improve surfactant biocompatibility.

Adsorption and self-assembly in methyl ester sulfonate surfactants, their eutectic mixtures and the role of electrolyte.

The α-methyl ester sulfonate, MES, anionic surfactants are a potentially important class of sustainable surfactants for a wide range of applications. The eutectic-like Kraft point minimum in the C16 and C18-MES mixtures is an important feature of that potential. Understanding their individual adsorption properties and the surface mixing of the eutectic mixtures are key to their wider exploitation. Neutron reflectivity has been used to investigate the adsorption at the air-water interface of the C16 and C18-MES surfactants and the eutectic mixture of C16 and C18-MES, in aqueous solution and in electrolyte. The micelle mixing of the eutectic mixture is investigated using small angle neutron scattering. The adsorption isotherms for C14 to C18-MES are found to scale with their critical micelle concentration value. The surface and micelle compositions of the C16 and C18-MES eutectic mixture differ from the eutectic composition; with compositions in the limit of high concentrations richer in C16-MES. The mixing properties are described by the pseudo phase approximation with a repulsive interaction between the two surfactants. The impact of the multivalent ions Al3+ on the adsorption at the air-water interface results in a transition from monolayer to multilayer adsorption.

Adsorption at the Air-Water Interface in Biosurfactant-Surfactant Mixtures: Quantitative Analysis of Adsorption in a Five-Component Mixture.

The composition of the air-water adsorbed layer of a quinary mixture consisting of three conventional surfactants, octaethylene glycol monododecyl ether (C12E8), dodecane-6-p-sodium benzene sulfonate (LAS6), and diethylene glycol monododecyl ether sodium sulfate (SLE2S), mixed with two biosurfactants, the rhamnolipids l-rhamnosyl-l-rhamnosyl-ß-hydroxydecanoyl-ß-hydroxydecanoyl, R2, and l-rhamnosyl-ß-hydroxydecanoyl-ß-hydroxydecanoyl, R1, has been measured over a range of compositions above the mixed critical micelle concentration. Additional measurements on some of the subsets of ternary and binary mixtures have also been measured by NR. The results have been analyzed using the pseudophase approximation (PPA) in conjunction with an excess free energy, GE, that depends on the quadratic and cubic terms in the composition. The compositions of the binary, ternary, and quinary mixtures could all be fitted to two sets of interaction parameters between the pairs of surfactants, one for micelles and one for adsorption. No ternary interactions or ternary corrections were required. Because the system contains two strongly anionic surfactants, the PPA can be extended, in practice, to ionic surfactants, contrary to the prevailing view. The values of the interaction parameters show that the quinary mixture, SLE2S-LAS6-C12E8-R1-R2, which is known to be a highly effective surfactant system, is characterized by a sequence of strong surface but weak micellar interactions. About half of the minima in GE for the strong surface interactions occur well away from the regular solution value of 0.5.

Adsorption of Methyl Ester Sulfonate at the Air-Water Interface: Can Limitations in the Application of the Gibbs Equation be Overcome by Computer Purification?

We describe a new laboratory synthesis of the α-methyl ester sulfonates based on direct sulfonation of the methyl ester by SO3 introduced from the vapor phase. This was used to synthesize a chain deuterated sample of αC14MES, which was then used to measure the surface excess of αC14MES directly at the air/water interface over a wide range of concentration using neutron reflection. The adsorption isotherm could be fitted to an empirical equation close to a Langmuir isotherm and gave a limiting surface excess of (3.4 ± 0.1) × 10-6 mol m-2 in the absence of added electrolyte. The neutron-measured surface excesses were combined with the integrated Gibbs equation to fit the variation in surface tension with concentration (σ-ln C curve). The fit was exact provided that we used a prefactor consistent with the counterion at the surface being an impurity divalent ion, as has previously been found for sodium diethylhexylsulfosuccinate (aerosol OT or AOT) and various perfluorooctanoates. The critical micelle concentration (CMC) was determined from this fit to be 2.4 ± 0.3 mM in the absence of electrolyte. In the presence of 100 mM NaCl, this contamination was suppressed and the σ-ln C curve could be fitted using the integrated Gibbs equation with the expected prefactor of 1. The new data were used to reinterpret measurements by Danov et al. on an unpurified sample of αC14MES for which computer refinement was used to try to eliminate the effects of the impurities.