Binder-Free Anodes for Potassium-ion Batteries Comprising Antimony Nanoparticles on Carbon Nanotubes Obtained Using Electrophoretic Deposition.

Antimony has a high theoretical capacity and suitable alloying/dealloying potentials to make it a future anode for potassium-ion batteries (PIBs); however, substantial volumetric changes, severe pulverization, and active mass delamination from the Cu foil during potassiation/depotassiation need to be overcome. Herein, we present the use of electrophoretic deposition (EPD) to fabricate binder-free electrodes consisting of Sb nanoparticles (NPs) embedded in interconnected multiwalled carbon nanotubes (MWCNTs). The anode architecture allows volume changes to be accommodated and prevents Sb delamination within the binder-free electrodes. The Sb mass ratio of the Sb/CNT nanocomposites was varied, with the optimized Sb/CNT nanocomposite delivering a high reversible capacity of 341.30 mA h g-1 (∼90% of the initial charge capacity) after 300 cycles at C/5 and 185.69 mA h g-1 after 300 cycles at 1C. Postcycling investigations reveal that the stable performance is due to the unique Sb/CNT nanocomposite structure, which can be retained over extended cycling, protecting Sb NPs from volume changes and retaining the integrity of the electrode. Our findings not only suggest a facile fabrication method for high-performance alloy-based anodes in PIBs but also encourage the development of alloying-based anodes for next-generation PIBs.

Binder-free germanium nanoparticle decorated multi-wall carbon nanotube anodes prepared via two-step electrophoretic deposition for high capacity Li-ion batteries.

Germanium (Ge) has a high theoretical specific capacity (1384 mA h g-1) and fast lithium-ion diffusivity, which makes it an attractive anode material for lithium-ion batteries (LIBs). However, large volume changes during lithiation can lead to poor capacity retention and rate capability. Here, electrophoretic deposition (EPD) is used as a facile strategy to prepare Ge nanoparticle carbon-nanotube (Ge/CNT) electrodes. The Ge and CNT mass ratio in the Ge/CNT nanocomposites can be controlled by varying the deposition time, voltage, and concentration of the Ge NP dispersion in the EPD process. The optimized Ge/CNT nanocomposite exhibited long-term cyclic stability, with a capacity of 819 mA h g-1 after 1000 cycles at C/5 and a reversible capacity of 686 mA h g-1 after 350 cycles (with a minuscule capacity loss of 0.07% per cycle) at 1C. The Ge/CNT nanocomposite electrodes delivered dramatically improved cycling stability compared to control Ge nanoparticles. This can be attributed to the synergistic effects of implanting Ge into a 3D interconnected CNT network which acts as a buffer layer to accommodate the volume expansion of Ge NPs during lithiation/delithiation, limiting cracking and/or crumbling, to retain the integrity of the Ge/CNT nanocomposite electrodes.

Highly Efficient Inverted Light-Emitting Diodes Based on Vertically Aligned CdSe/CdS Nanorod Layers Fabricated by Electrophoretic Deposition.

Inverted colloidal-nanocrystal-based LEDs (NC-LEDs) are highly interesting and invaluable for large-scale display technology and flexible electronics. Semiconductor nanorods (NRs), in addition to the tunable wavelengths of the emitted light (achieved, for example, by the variation of the NR diameter or the diameter of core in a core-shell configuration), also exhibit linearly polarized emission, a larger Stokes shift, faster radiative decay, and slower bleaching kinetics than quantum dots (QDs). Despite these advantages, it is difficult to achieve void-free active NR layers using simple spin-coating techniques. Herein, we employ electrophoretic deposition (EPD) to make closely packed, vertically aligned CdSe/CdS core/shell nanorods (NRs) as the emissive layer. Following an inverted architecture, the device fabricated yields an external quantum efficiency (EQE) of 6.3% and a maximum luminance of 4320 cd/m2 at 11 V. This good performance can be attributed to the vertically aligned NR layer, enhancing the charge transport by reducing the resistance of carrier passage, which is supported by our finite element simulations. To the best of our knowledge, this is the first time vertically aligned NR layers made by EPD have been reported for the fabrication of NC-LEDs and the device performance is one of the best for inverted red NR-LEDs. The findings presented in this work bring forth a simple and effective technique for making vertically aligned NRs, and the mechanism behind the NR-LED device with enhanced performance using these NRs is illustrated. This technique may prove useful to the development of a vast class of nanocrystal-based optoelectronics, including solar cells and laser devices.

A self-encapsulated porous Sb-C nanocomposite anode with excellent Na-ion storage performance.

In this study, a self-encapsulated Sb-C nanocomposite as an anode material for sodium-ion batteries (SIBs) was successfully synthesised using an SbCl3-citrate complex precursor, followed by a drying and calcination process under an inert N2 atmosphere. When the molar ratio of SbCl3 to citric acid was varied from 1 : 1 to 1 : 4, the Sb-C nanocomposite with a molar ratio of 1 : 3 (Sb-C3) exhibited the highest specific surface area (265.97 m2 g-1) and pore volume (0.158 cm3 g-1). Furthermore, the Sb-C3 electrode showed a high reversible capacity of 559 mA h g-1 at a rate of C/10 and maintained a high reversible capacity of 430 mA h g-1 even after 195 cycles at a rate of 1C. The Sb-C3 electrode exhibited an excellent rate capability of 603, 445, and 357 mA h g-1 at the rates of C/20, 5C, and 10C, respectively. Furthermore, a full cell composed of an Sb-C3 anode and a Na3V2(PO4)3 cathode exhibited good specific capacity and cyclability, making the Sb-C composite a promising anode material for high-performance SIBs.

Facile Synthesis of Si@SiC Composite as an Anode Material for Lithium-Ion Batteries.

Here, we propose a simple method for direct synthesis of a Si@SiC composite derived from a SiO2@C precursor via a Mg thermal reduction method as an anode material for Li-ion batteries. Owing to the extremely high exothermic reaction between SiO2 and Mg, along with the presence of carbon, SiC can be spontaneously produced with the formation of Si. The synthesized Si@SiC was composed of well-mixed SiC and Si nanocrystallites. The SiC content of the Si@SiC was adjusted by tuning the carbon content of the precursor. Among the resultant Si@SiC materials, the Si@SiC-0.5 sample, which was produced from a precursor containing 4.37 wt % of carbon, exhibits excellent electrochemical characteristics, such as a high first discharge capacity of 1642 mAh g-1 and 53.9% capacity retention following 200 cycles at a rate of 0.1C. Even at a high rate of 10C, a high reversible capacity of 454 mAh g-1 was obtained. Surprisingly, at a fixed discharge rate of C/20, the Si@SiC-0.5 electrode delivered a high capacity of 989 mAh g-1 at a charge rate of 20C. In addition, a full cell fabricated by coupling a lithiated Si@SiC-0.5 anode and a LiCoO2 cathode exhibits excellent cyclability over 50 cycles. This outstanding electrochemical performance of Si@SiC-0.5 is attributed to the SiC phase, which acts as a buffer layer that stabilizes the nanostructure of the Si active phase and enhances the electrical conductivity of the electrode.