New insights and advances on pyomelanin production: from microbial synthesis to applications.

Pyomelanin is a brown-black phenolic polymer and results from the oxidation of homogentisic acid (HGA) in the L-tyrosine pathway. As part of the research for natural and active ingredients issued from realistic bioprocesses, this work re-evaluates the HGA pigment and makes an updated inventory of its syntheses, microbial pathways, and properties, with tracks and recent advances for its large-scale production. The mechanism of the HGA polymerization is also well documented. In alkaptonuria, pyomelanin formation leads to connective tissue damage and arthritis, most probably due to the ROS issued from HGA oxidation. While UV radiation on human melanin may generate degradation products, pyomelanin is not photodegradable, is hyperthermostable, and has other properties better than L-Dopa melanin. This review aims to raise awareness about the potential of this pigment for various applications, not only for skin coloring and protection but also for other cells, materials, and as a promising (semi)conductor for bioelectronics and energy.

Production and properties of non-cytotoxic pyomelanin by laccase and comparison to bacterial and synthetic pigments.

Pyomelanin is a polymer of homogentisic acid synthesized by microorganisms. This work aimed to develop a production process and evaluate the quality of the pigment. Three procedures have been elaborated and optimized, (1) an HGA-Mn2+ chemical autoxidation (PyoCHEM yield 0.317 g/g substrate), (2) an induced bacterial culture of Halomonas titanicae through the 4-hydroxyphenylacetic acid-1-hydroxylase route (PyoBACT, 0.55 g/L), and (3) a process using a recombinant laccase extract with the highest level produced (PyoENZ, 1.25 g/g substrate) and all the criteria for a large-scale prototype. The chemical structures had been investigated by 13C solid-state NMR (CP-MAS) and FTIR. Car-Car bindings predominated in the three polymers, Car-O-Car (ether) linkages being absent, proposing mainly C3-C6 (α-bindings) and C4-C6 (ß-bindings) configurations. This work highlighted a biological decarboxylation by the laccase or bacterial oxidase(s), leading to the partly formation of gentisyl alcohol and gentisaldehyde that are integral parts of the polymer. By comparison, PyoENZ exhibited an Mw of 5,400 Da, was hyperthermostable, non-cytotoxic even after irradiation, scavenged ROS induced by keratinocytes, and had a highly DPPH-antioxidant and Fe3+-reducing activity. As a representative pigment of living cells and an available standard, PyoENZ might also be useful for applications in extreme conditions and skin protection.

Synthesis and Evaluation of the Antibacterial Activities of 13-Substituted Berberine Derivatives.

The biological activities of berberine, a natural plant molecule, are known to be affected by structural modifications, mostly at position 9 and/or 13. A series of new 13-substituted berberine derivatives were synthesized and evaluated in term of antimicrobial activity using various microorganisms associated to human diseases. Contrarily to the original molecule berberine, several derivatives were found strongly active in microbial sensitivity tests against Mycobacterium, Candida albicans and Gram-positive bacteria, including naïve or resistant Bacillus cereus, Staphylococcus aureus and Streptococcus pyogenes with minimal inhibitory concentration (MIC) of 3.12 to 6.25 µM. Among the various Gram-negative strains tested, berberine's derivatives were only found active on Helicobacter pylori and Vibrio alginolyticus (MIC values of 1.5-3.12 µM). Cytotoxicity assays performed on human cells showed that the antimicrobial berberine derivatives caused low toxicity resulting in good therapeutic index values. In addition, a mechanistic approach demonstrated that, contrarily to already known berberine derivatives causing either membrane permeabilization, DNA fragmentation or interacting with FtsZ protein, active derivatives described in this study act through inhibition of the synthesis of peptidoglycan or RNA. Overall, this study shows that these new berberine derivatives can be considered as potent and safe anti-bacterial agents active on human pathogenic microorganisms, including ones resistant to conventional antibiotics.

In Vitro Cocktail Effects of PCB-DL (PCB118) and Bulky PCB (PCB153) with BaP on Adipogenesis and on Expression of Genes Involved in the Establishment of a Pro-Inflammatory State.

(1) Objective: Highlight the in vitro effects of 3T3-L1 cell exposure to polychlorinated biphenyls (PCB118 and 153) or benzo(a)pyrene (BaP) alone or as a cocktail on adipogenesis (ADG) by focusing on changes in lipid metabolism and inflammatory-related genes expression (INFG) and ADG-related genes expression (ADGG); (2) Results: Treatment from the early stage of cell differentiation by BaP alone or in combination with PCBs decreased the expression of some of the ADGG (PPARγGlut-4, FAS, Lipin-1a, Leptin, and Adiponectin). BaP enhanced the INFG, especially MCP-1 and TNFα. Co-exposure to BaP and PCB153 showed a synergistic effect on TNFα and IL6 expression. Treatment with BaP and PCBs during only the maturation period up-regulated the INFG (IL6, TNFα, CXCL-10 & MCP-1). PCB118 alone also enhanced TNFα, CXCL-10, and PAI-1 expression. The change in MCP-1 protein expression was in agreement with that of the gene. Finally, the BaP-induced up-regulation of the xenobiotic responsive element (XRE)-controlled luciferase activity was impaired by PCB153 but not by PCB118; (3) Conclusion: BaP and PCBs down-regulate a part of ADGG and enhance INFG. The direct regulatory effect of PCBs on both ADGG and INFG is usually rather lower than that of BaP and synergistic or antagonistic cocktail effects are clearly observed.

The Transcriptional Effects of PCB118 and PCB153 on the Liver, Adipose Tissue, Muscle and Colon of Mice: Highlighting of Glut4 and Lipin1 as Main Target Genes for PCB Induced Metabolic Disorders.

Epidemiological studies have associated environmental exposure to polychlorinated biphenyls (PCBs) with an increased risk of type 2 diabetes; however, little is known about the underlying mechanisms involved in the metabolic side-effects of PCB. Our study evaluated the transcriptional effects of a subchronic exposure (gavage at Day 0 and Day 15 with 10 or 100 µmol/Kg bw) to PCB118 (dioxin-like PCB), PCB153 (non-dioxin-like PCB), or an equimolar mixture of PCB118 and PCB153 on various tissues (liver, visceral adipose tissue, muscle, and colon) in mice. Our results showed that a short-term exposure to PCB118 and/or PCB153 enhanced circulating triglyceride levels but did not affect glycemia. Among the studied tissues, we did not observe any modification of the expression of inflammation-related genes, such as cytokines or chemokines. The main transcriptional effects were observed in visceral adipose and liver tissues. We found a downregulation of lipin1 and glut4 expression in these two target organs. In adipose tissue, we also showed a downregulation of Agpat2, Slc25a1, and Fasn. All of these genes are involved in lipid metabolism and insulin resistance. In muscles, we observed an induction of CnR1 and Foxo3 expression, which may be partly involved in PCB metabolic effects. In summary, our results suggest that lipin1 and glut4, notably in adipose tissue, are the main targeted genes in PCB-induced metabolic disorders, however, further studies are required to fully elucidate the mechanisms involved.

Self-assembled liquid crystalline nanoparticles as an ophthalmic drug delivery system. Part I: influence of process parameters on their preparation studied by experimental design.

To develop self-assembled liquid crystalline nanoparticles as a drug delivery system for keratoconus treatment, a formulation containing riboflavin a water-soluble drug, two surfactants (poloxamer 407 and mono acyl glycerol - monoolein-) and water was optimized and prepared by emulsification and a homogenization process. A fractional factorial design was applied to estimate the main effects and interaction effects of five parameters on two responses, namely particle size and encapsulation efficiency. The five parameters are the temperature of the two phases, the duration of emulsification, the presence of heating during homogenization, the number of passes and pressure. The most influent parameters are the presence of heating during the homogenization and the pressure that led to the production of nanoparticles with an average size of 145 nm and an average encapsulation efficiency of 46%.

Self-assembled liquid crystalline nanoparticles as an ophthalmic drug delivery system. Part II: optimization of formulation variables using experimental design.

In the field of keratoconus treatment, a lipid-based liquid crystal nanoparticles system has been developed to improve the preocular retention and ocular bioavailability of riboflavin, a water-soluble drug. The formulation of this ophthalmic drug delivery system was optimized by a simplex lattice experimental design. The delivery system is composed of three main components that are mono acyl glycerol (monoolein), poloxamer 407 and water and two secondary components that are riboflavin and glycerol (added to adjust the osmotic pressure). The amounts of these three main components were selected as the factors to systematically optimize the dependent variables that are the encapsulation efficiency and the particle size. In this way, 12 formulas describing experimental domain of interest were prepared. Results obtained using small angle X-rays scattering (SAXS) and cryo-transmission electron microscopy (cryo-TEM) evidenced the presence of nano-objects with either sponge or hexagonal inverted structure. In the zone of interest, the percentage of each component was determined to obtain both high encapsulation efficiency and small size of particles. Two optimized formulations were found: F7 and F1. They are very close in the ternary phase diagram as they contain 6.83% of poloxamer 407; 44.18% and 42.03% of monoolein; 46.29% and 48.44% of water for F7 and F11, respectively. These formulations displayed a good compromise between inputs and outputs investigated.

Recent advances in ocular drug delivery.

Amongst the various routes of drug delivery, the field of ocular drug delivery is one of the most interesting and challenging endeavors facing the pharmaceutical scientist. Recent research has focused on the characteristic advantages and limitations of the various drug delivery systems, and further research will be required before the ideal system can be developed. Administration of drugs to the ocular region with conventional delivery systems leads to short contact time of the formulations on the epithelium and fast elimination of drugs. This transient residence time involves poor bioavailability of drugs which can be explained by the tear production, non-productive absorption and impermeability of corneal epithelium. Anatomy of the eye is shortly presented and is connected with ophthalmic delivery and bioavailability of drugs. In the present update on ocular dosage forms, chemical delivery systems such as prodrugs, the use of cyclodextrins to increase solubility of various drugs, the concept of penetration enhancers and other ocular drug delivery systems such as polymeric gels, bioadhesive hydrogels, in-situ forming gels with temperature-, pH-, or osmotically induced gelation, combination of polymers and colloidal systems such as liposomes, niosomes, cubosomes, microemulsions, nanoemulsions and nanoparticles are discussed. Novel ophthalmic delivery systems propose the use of many excipients to increase the viscosity or the bioadhesion of the product. New formulations like gels or colloidal systems have been tested with numerous active substances by in vitro and in vivo studies. Sustained drug release and increase in drug bioavailability have been obtained, offering the promise of innovation in drug delivery systems for ocular administration. Combining different properties of pharmaceutical formulations appears to offer a genuine synergy in bioavailability and sustained release. Promising results are obtained with colloidal systems which present very comfortable conditions of use and prolonged action.

Evaluation of the mutagenic/clastogenic potential of 3,6-di-substituted acridines targeted for anticancer chemotherapy.

The mutagenicity and clastogenicity of a series of 18 3,6-di-substituted acridines were evaluated by the Ames test on Salmonella typhimurium TA 97a and by the micronucleus assay on Chinese Hamster Ovary cells (CHO cells), as compared to their cytotoxicity against CHO cells. Experimental results overall demonstrated that simple symmetric molecules were more mutagenic than asymmetric structures. The mutagenic properties of acridines on strain TA97a mainly depended on molecular geometry and length, and on the nature of the substituted groups. The clastogenicity of acridines mainly depended on molecular length and electrophilicity in mammalian cells. Structure-activity relationships indicated that cytotoxicity could be decoupled from genotoxicity by introducing several chemical groups that induced asymmetry or bulkiness in the acridine compounds. They led to the synthesis of the promising 3-acetamido-6-(4-fluorobenzamido)acridine, which displayed a strong cytotoxic activity and was not mutagenic.

A rheological method to evaluate the physical stability of highly viscous pharmaceutical oil-in-water emulsions.

PURPOSE: The aim of this study was to develop a rheological method to evaluate the stability of highly viscous pharmaceutical emulsions. Thereby, the time devoted to the storage tests could be reduced and manufacturers could save time in optimizing their formulations and manufacturing techniques for topical pharmaceutical forms. The influence of the type of oil and the type of emulsifier on the microstructure of the emulsions was also studied. MATERIALS AND METHODS: The samples were stored at 25 and at 50 degrees C for 6 months and analysed every month using rheological as well as microscopic techniques. The size and the organization of the droplets within the emulsion were determined by freeze-fracture electron microscopy and optical contrast phase microscopy. RESULTS: A decrease in the rheological parameters was observed for the OC emulsions ("Tween/Span" emulsions made with olive oil) and the "Montanov" emulsions. The rheological measurements showed that the structure of the OC emulsions and that of the emulsions made with the Montanov 82 emulsifier become more brittle when submitted to a shear force. The micrographs obtained by freeze-fracture electron microscopy showed that for OC only the oil droplets arrange in a network structure. Storage tests at 50 degrees C confirmed the rheological assumptions on the stability of emulsions. CONCLUSION: The study of the effect of shearing on the emulsions allowed quick discrimination between the emulsions according to their stabilities. The rheological tool gave information on the structure of the emulsions and on the aging process.

Development of stealth liposome formulation of 2'-deoxyinosine as 5-fluorouracil modulator: in vitro and in vivo study.

PURPOSE: The aims of this study were to develop a stealth, pegylated liposomal formulation of 2'-deoxyinosine (d-Ino), a 5-fluorouracil (5-FU) modulator, to evaluate its efficacy in vitro and in tumor-bearing mice, and to study its pharmacokinetics in rats. METHOD: After designing a pegylated liposome encapsulating d-Ino (L-d-Ino), we evaluated its efficacy as 5-FU modulator in vitro. Antiproliferative assays, thymidylate synthase (TS) inhibition, and apoptosis studies were carried out to check whether an optimization of 5-FU action was achieved on the 5-FU-resistant SW620 cell line. Animal pharmacokinetic and ex vivo studies were next performed to confirm that L-d-Ino displayed a slower plasma elimination pattern than free d-Ino. Finally, effects on tumor growth of L-d-Ino + 5-FU combination was evaluated in xenografted mice. RESULTS: We developed a stable, sterile, and homogenous 100-nm population of pegylated liposomes encapsulating 30% of d-Ino. Liposomal d-Ino exhibited a strong potential as 5-FU modulator in vitro by enhancing TS inhibition and subsequent apoptosis induction, while displaying a better pharmacokinetic profile in animals, with a near seven times clearance reduction as compared with the free form. When used in tumor-bearing mice in combination with 5-FU, our results showed next that the association led to 70% of tumor reduction with a doubling median survival time as compared with untreated animals, whereas 5-FU alone was ineffective. CONCLUSION: Our data show that liposomal d-Ino, through an optimized pharmacokinetic profile, displays a potent effect as fluoropyrimidines modulator, both in vitro and in xenografted mice. Besides, we showed here that it is possible to reverse a resistant phenotype to 5-FU, a major drug extensively described in clinical oncology.