Post-imprinting modification: electrochemical and scanning electrochemical microscopy studies of a semi-covalently surface imprinted polymer.

Herein we described a post-imprinting modification of the imprinted molecular cavities for electrochemical sensing of a target protein. Imprinted molecular cavities were generated by following the semi-covalent surface imprinting approach. These mesoporous cavities were modified with a ferrocene 'electrochemical' tracer for electrochemical transduction of the target protein recognition. Electrochemical sensors prepared after post-imprinting modification showed a linear response in the concentration range of 0.5 to 50 µM. Chemosensors fabricated based on capacitive impedimetric transduction demonstrated that imprinted molecular cavities without post-imprinting modification showed better selectivity. Scanning electrochemical microscopy (SECM) was used for the surface characterization of imprinted molecular cavities modified with ferrocene electrochemical tracers. SECM analysis performed in the feedback mode monitor changes in the surface state of the ferrocene-modified polymer film. The kinetics of the mediator regeneration was almost 1.8 times higher on the non-imprinted surface versus the post-imprinting modified molecular imprinted polymer.

In-Capillary Photodeposition of Glyphosate-Containing Polyacrylamide Nanometer-Thick Films.

The present research reports on in-water, site-specific photodeposition of glyphosate (GLP)-containing polyacrylamide (PAA-GLP) nanometer-thick films (nanofilms) on an inner surface of fused silica (fused quartz) microcapillaries presilanized with trimethoxy(octen-7-yl)silane (TMOS). TMOS was chosen because of the vinyl group presence in its structure, enabling its participation in the (UV light)-activated free-radical polymerization (UV-FRP) after its immobilization on a fused silica surface. The photodeposition was conducted in an aqueous (H2O/ACN; 3:1, v/v) solution, using UV-FRP (λ = 365 nm) of the acrylamide (AA) functional monomer, the N,N'-methylenebis(acrylamide) (BAA) cross-linking monomer, GLP, and the azobisisobutyronitrile (AIBN) UV-FRP initiator. Acetonitrile (ACN) was used as the porogen and the solvent to dissolve monomers and GLP. Because of the micrometric diameters of microcapillaries, the silanization and photodeposition procedures were first optimized on fused silica slides. The introduction of TMOS, as well as the formation of PAA and PAA-GLP nanofilms, was determined using atomic force microscopy (AFM), scanning electron microscopy with energy-dispersive X-ray (SEM-EDX) spectroscopy, and confocal micro-Raman spectroscopy. Particularly, AFM and SEM-EDX measurements determined nanofilms' thickness and GLP content, respectively, whereas in-depth confocal (micro-Raman spectroscopy)-assisted imaging of PAA- and PAA-GLP-coated microcapillary inner surfaces confirmed the successful photodeposition. Moreover, we examined the GLP impact on polymer gelation by monitoring hydration in a hydrogel and a dried powder PAA-GLP. Our study demonstrated the usefulness of the in-capillary micro-Raman spectroscopy imaging and in-depth profiling of GLP-encapsulated PAA nanofilms. In the future, our simple and inexpensive procedure will enable the fabrication of polymer-based microfluidic chemosensors or adsorptive-separating devices for GLP detection, determination, and degradation.

Selective Impedimetric Chemosensing of Carcinogenic Heterocyclic Aromatic Amine in Pork by dsDNA-Mimicking Molecularly Imprinted Polymer Film-Coated Electrodes.

Inspired by the easy intercalation of quinoxaline heterocyclic aromatic amines (HAAs) in double-stranded DNA (dsDNA), we synthesized a nucleobase-functionalized molecularly imprinted polymer (MIP) as the recognition unit of an impedimetric chemosensor for the selective determination of a 2-amino-3,7,8-trimethyl-3H-imidazo[4,5-f]quinoxaline (7,8-DiMeIQx) HAA. HAAs are generated in meat and fish processed at high temperatures. They are considered to be potent hazardous carcinogens. The MIP film was prepared by potentiodynamic electropolymerization of a pre-polymerization complex of two adenine- and one thymine-substituted bis(2,2'-bithien-5-yl)methane functional monomer molecules with one 7,8-DiMeIQx template molecule, in the presence of the 2,4,5,2',4',5'-hexa(thiophene-2-yl)-3,3'-bithiophene cross-linking monomer, in solution. The as-formed MIP chemosensor allowed for the selective impedimetric determination of 7,8-DiMeIQx in the 47 to 400 µM linear dynamic concentration range with a limit of detection of 15.5 µM. The chemosensor was successfully applied for 7,8-DiMeIQx determination in the pork meat extract as a proof of concept.

Electrochemical sensor for selective tyramine determination, amplified by a molecularly imprinted polymer film.

A molecularly imprinted polymer (MIP) film based electrochemical sensor for selective determination of tyramine was devised, fabricated, and tested. Tyramine is generated in smoked and fermented food products. Therefore, it may serve as a marker of the rottenness of these products. Importantly, intake of large amounts of tyramine by patients treated with monoamine oxidase (MAO) inhibitors may lead to a "cheese effect", namely, a dangerous hypertensive crisis. The limit of detection at S/N = 3 of the chemosensor, in both differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) determinations, with the use of the Fe(CN)64-/Fe(CN)63- redox probe, was 159 and 168 µM tyramine, respectively. The linear dynamic concentration range was 290 µM to 2.64 mM tyramine. The chemosensor was highly selective with respect to the glucose, urea, and creatinine interferences. Its DPV determined apparent imprinting factor was 5.6. Moreover, the mechanism of the "gate effect" in the operation of the polymer film-coated electrodes was unraveled.

Excited state intramolecular proton transfer in π-expanded phenazine-derived phenols.

Two previously inaccessible analogs of 10-hydroxybenzo[h]quinoline were prepared via a straightforward strategy comprising the formation of π-expanded phenazines skeleton followed by C-H acetoxylation at position 10. Two bis-phenols possessing C2 and D2 symmetry were obtained in yields of 52% and 15%, respectively. The occurrence of excited state intramolecular proton transfer (ESIPT) was detected in all cases because steady state emission was observed only from the excited keto-tautomer. Additionally, a short-lived, ∼0.1 ps, emission decay was resolved by the femtosecond up-conversion technique at the blue side of the keto-tautomer emission band, 610 nm, and was attributed to the ESIPT, i.e., conversion from enol to keto tautomer. In comparison with the corresponding 10-hydroxybenzo[h]quinoline emissions, the emission spectrum of the π-expanded phenazine analogues were weaker but displayed a characteristic bathochromically shift into NIR region. These phenazine analogues constitute one of largest heterocycles for which ESIPT was unambiguously detected.

Low-temperature spectra of the analogues of 10-hydroxybenzo[h]quinoline as an indication of barrierless ESIPT.

The absorption and fluorescence spectra of two analogues of 10-hydroxybenzo[h]quinoline (10-HBQ), namely, 1-hydroxy-7-methylbenzo[c]acridine (HMBA) and 4-hydroxybenzo[c]phenanthridine (HBPA), were studied in n-alkane matrices at 5 K. Considerable energy separation between the onsets of the spectra and broadening of the bands was an indication that intramolecular proton transfer (ESIPT) takes place at such a low temperature. DFT and ab initio methods were used to calculate the electronic transition energies and oscillator strengths and the vibronic structure of the electronic spectra. Shortcomings in our knowledge of the shape of the potential energy surface for ESIPT systems are highlighted in the context of the discussion of the shape of the electronic spectra. The π-expansion of the 10-HBQ chromophore achieved by adding a benzene moiety at various positions adjacent to the pyridine ring led to compounds possessing diverse photophysical properties, ranging from the non-ESIPT strongly fluorescent molecule of 10-hydroxy-1-azaperylene to weakly emitting (or nonemitting) molecules, where ESIPT occurs very efficiently.

Excited state intramolecular proton transfer in electron-rich and electron-poor derivatives of 10-hydroxybenzo[h]quinoline.

Eight previously inaccessible derivatives of 10-hydroxybenzo[h]quinoline were prepared via a straightforward strategy comprising formation of the benzo[h]quinoline skeleton followed by C-H acetoxylation at position 10. The occurrence of excited state intramolecular proton transfer (ESIPT) was detected in all cases since emission was observed only from the excited keto-tautomer. Studies on derivatives bearing both electron-donating and electron-withdrawing groups adjacent to the pyridine ring allowed us to identify some design patterns giving rise to NIR emission and large Stokes shifts. For a derivative of 10-hydroxybenzo[c]acridine, emission at 745 nm was observed, one of the lowest energy fluorescence ever reported for ESIPT system. On the basis of time-resolved measurements, proton transfer was found to be extremely fast with time constants in the range (0.08-0.45 ps).

12-hydroxy-1-azaperylene-limiting case of the ESIPT system: enol-keto tautomerization in S0 and S1 states.

Absorption, fluorescence, and fluorescence excitation spectra of 12-hydroxy-1-azaperylene (HAP) and 1-azaperylene were studied in n-alkane matrices at 5 K. Two stable tautomers of HAP, each of them in n-nonane embedded in two sites, were identified and attributed to the enol and keto forms. Theoretical calculations of the energy and vibrational structure of the spectra suggest that tautomer A, with the (0, 0) transition energy at 18,980 ± 10 cm(-1) (and 19,060 ± 10 cm(-1) in the high energy site), should be identified as the keto form, whereas tautomer B, with the (0, 0) energy at 19,200 ± 20 cm(-1) (19,290 ± 20 cm(-1)), as the enol form. Observation of absorption and fluorescence of both tautomeric forms and lack of large Stokes shift of fluorescence of the keto form classify HAP as the limiting case of the excited-state intramolecular proton transfer system.

Preparation of a family of 10-hydroxybenzo[h]quinoline analogues via a modified Sanford reaction and their excited state intramolecular proton transfer properties.

We have developed a highly optimized methodology that allows for the oxidative acetoxylation of a sterically and electronically demanding library of analogues of benzo[h]quinoline. The optimal conditions for the insertion of an OAc group were identified after examining various reaction parameters (solvent, oxidant, catalyst, temperature, time). The conditions identified (Pd(OAc)(2), PhI(OAc)(2), MeCN, 150 °C, 16 h), combined with the hydrolysis of acetates, resulted in the formation of hydroxybenzoquinolines in 27-59% yield, whereas all previously published procedures were ineffective. This synthesis was compatible with diverse functionalities (ester, aldehyde, carbon-carbon triple bond) and, most importantly, worked for sterically hindered analogues as well as for compounds possessing electron-donating and electron-withdrawing substituents at various positions. All the obtained compounds demonstrated excited-state intramolecular proton transfer (ESIPT) manifesting as small fluorescence quantum yields and large Stokes shifts (8300-9660 cm(-1)). The effect of structural variations in eight 10-hydroxybenzo[h]quinoline analogues on absorption and emission properties was studied in detail.

Strongly emitting fluorophores based on 1-azaperylene scaffold.

A novel blue-emitting polycyclic aromatic system was synthesized via anion-radical coupling. Its efficient direct hydroxylation led to a phenol possessing an intramolecular hydrogen-bond system. Since the energy gap difference between the enol and keto forms of this molecule is very small, characteristic of ESIPT chromophores, bathochromically shifted fluorescence was not observed.

From bifunctional nucleophilic behavior of DBU to a new heterocyclic fluorescent platform.

[structure: see text] An unexpected discovery of a novel cyclocondensation reaction of 1,8-diazabicyclo[5.4.0]undec-8-ene (DBU) with activated 1,2-dichloro compounds is described. The 2-aminopyrrole skeleton is generated through the concomitant formation of new nitrogen-carbon and carbon-carbon bonds. A new pentacyclic derivative formed upon the reaction of 2,3-dichloroquinoxaline with DBU exhibits strong fluorescence both in solutions (Phi in hexane = 0.4) and in the solid state.