Inferring Microbial Biomass Yield and Cell Weight Using Probabilistic Macrochemical Modeling.

Growth rates and biomass yields are key descriptors used in microbiology studies to understand how microbial species respond to changes in the environment. Of these, biomass yield estimates are typically obtained using cell counts and measurements of the feed substrate. These quantities are perturbed with measurement noise however. Perhaps most crucially, estimating biomass from cell counts, as needed to assess yields, relies on an assumed cell weight. Noise and discrepancies on these assumptions can lead to significant changes in conclusions regarding the microbes' response. This article proposes a methodology to address these challenges using probabilistic macrochemical models of microbial growth. It is shown that a model can be developed to fully use the experimental data, relax assumptions and greatly improve robustness to a priori estimates of the cell weight, and provides uncertainty estimates of key parameters. This methodology is demonstrated in the context of a specific case study and the estimation characteristics are validated in several scenarios using synthetically generated microbial growth data.

Hyperthermophilic endospores germinate and metabolize organic carbon in sediments heated to 80°C.

Cold surface sediments host a seedbank of functionally diverse thermophilic bacteria. These thermophiles are present as endospores, which are widely dispersed in aquatic environments. Here, we investigated the functional potential of endospore populations in cold surface sediments heated to 80°C. Microbial production of acetate was observed at 80°C and could be enhanced by supplying additional organic carbon substrates. Comparison of 16S rRNA gene amplicon libraries from 80°C enrichments to sediments heated to lower temperatures (50-70°C) showed that temperature selects for distinct populations of endospore-forming bacteria. Whereas sulfate-reducing thermophiles were enriched in 50-70°C incubations, 80°C exceeds their thermal tolerance and selects for hyperthermophilic organotrophic bacteria that are similarly detected in amplicon libraries from sediments heated to 90°C. Genome-resolved metagenomics revealed novel carbon cycling members of Symbiobacteriales, Thermosediminibacteraceae, Thermanaeromonas and Calditerricola with the genomic potential for the degradation of carbohydrates, sugars, amino acids and nucleotides. Endospores of thermophilic bacteria are deposited on seabed sediments worldwide where they remain dormant as they are buried in the accumulating sediments. Our results suggest that endospore populations could be activated by temperature increases encountered during burial and show the potential for organotrophic metabolic activity contributing to acetate generation in deep hot sediments.

Complete Sequences of the Velvet Worm Slime Proteins Reveal that Slime Formation is Enabled by Disulfide Bonds and Intrinsically Disordered Regions.

The slime of velvet worms (Onychophora) is a strong and fully biodegradable protein material, which upon ejection undergoes a fast liquid-to-solid transition to ensnare prey. However, the molecular mechanisms of slime self-assembly are still not well understood, notably because the primary structures of slime proteins are yet unknown. Combining transcriptomic and proteomic studies, the authors have obtained the complete primary sequences of slime proteins and identified key features for slime self-assembly. The high molecular weight slime proteins contain cysteine residues at the N- and C-termini that mediate the formation of multi-protein complexes via disulfide bonding. Low complexity domains in the N-termini are also identified and their propensity for liquid-liquid phase separation is established, which may play a central role in slime biofabrication. Using solid-state nuclear magnetic resonance, rigid and flexible domains of the slime proteins are mapped to specific peptide domains. The complete sequencing of major slime proteins is an important step toward sustainable fabrication of polymers inspired by the velvet worm slime.

Proteins identified through predictive metagenomics as potential biomarkers for the detection of microbiologically influenced corrosion.

The unpredictability of microbial growth and subsequent localized corrosion of steel can cause significant cost for the oil and gas industry, due to production downtime, repair, and replacement. Despite a long tradition of academic research and industrial experience, microbial corrosion is not yet fully understood and thus not effectively controlled. In particular, biomarkers suitable for diagnosing microbial corrosion which abstain from the detection of the classic signatures of sulfate-reducing bacteria are urgently required. In this study, a natural microbial community was enriched anaerobically with carbon steel coupons and in the presence of a variety of physical and chemical conditions. With the characterization of the microbiome and of its functional properties inferred through predictive metagenomics, a series of proteins were identified as biomarkers in the water phase that could be correlated directly to corrosion. This study provides an opportunity for the further development of a protein-based biomarker approach for effective and reliable microbial corrosion detection and monitoring in the field.

Unraveling the reaction mechanism of selective C9 monomeric phenols formation from lignin using Pd-Al2O3-activated biochar catalyst.

The conversion of biomass-derived lignin to valuable monomeric phenols at high selectivity is of paramount importance for sustainable biorefineries. In this study, a novel Pd-Al2O3 supported on activated biochar catalyst is developed for lignin hydrogenolysis. The catalyst characterization revealed that the (111) planes of both of Pd0 and Al2O3 were exposed to the surface. The maximum lignin conversion of 70.4% along with high liquid yield (∼57 wt%) was obtained at 240 °C, 3 h and 3 MPa H2 pressure. The total monomeric phenols yield in the liquid was 51.6 wt%, out of which C9 monomeric guaiacols constituted âˆ¼ 30.0 wt% with 38.0% selectivity to 4-propyl guaiacol. Using the reaction intermediate, coniferyl alcohol, chemoselective hydrogenation of Cα=Cß is proved to occur over the Pd site, while dehydroxylation of Cγ-OH is shown to occur over the alumina site. An impressive carbon atom economy of 60% was achieved for the production of monomeric phenols.

Proteomic study of Desulfovibrio ferrophilus IS5 reveals overexpressed extracellular multi-heme cytochrome associated with severe microbiologically influenced corrosion.

Microbiologically influenced corrosion (MIC) is recognized as a considerable threat to carbon steel asset integrity in the oil and gas industry. There is an immediate need for reliable and broadly applicable methods for detection and monitoring of MIC. Proteins associated with microbial metabolisms involved in MIC could serve as useful biomarkers for MIC diagnosis and monitoring. A proteomic study was conducted using a lithotrophically-grown bacterium Desulfovibrio ferrophilus strain IS5, which is known to cause severe MIC in seawater environments. Unique proteins, which are differentially and uniquely expressed during severe microbial corrosion by strain IS5, were identified. This includes the detection of a multi-heme cytochrome protein possibly involved in extracellular electron transfer in the presence of the carbon steel. Thus, we conclude that this newly identified protein associated closely with severe MIC could be used to generate easy-to-implement immunoassays for reliable detection of microbiological corrosion in the field.

Sediment cooling triggers germination and sulfate reduction by heat-resistant thermophilic spore-forming bacteria.

Thermophilic endospores are widespread in cold marine sediments where the temperature is too low to support growth and activity of thermophiles in situ. These endospores are likely expelled from warm subsurface environments and subsequently dispersed by ocean currents. The endospore upper temperature limit for survival is 140°C, which can be tolerated in repeated short exposures, potentially enabling transit through hot crustal fluids. Longer-term thermal tolerance of endospores, and how long they could persist in an environment hotter than their maximum growth temperature, is less understood. To test whether thermophilic endospores can survive prolonged exposure to high temperatures, sediments were incubated at 80-90°C for 6, 12 or 463 days. Sediments were then cooled by 10-40°C, mimicking the cooling in subsurface oil reservoirs subjected to seawater injection. Cooling the sediments induced sulfate reduction, coinciding with an enrichment of endospore-forming Clostridia. Different Desulfofundulus, Desulfohalotomaculum, Desulfallas, Desulfotomaculum and Desulfofarcimen demonstrated different thermal tolerances, with some Desulfofundulus strains surviving for >1 year at 80°C. In an oil reservoir context, heat-resistant endospore-forming sulfate-reducing bacteria have a survival advantage if they are introduced to, or are resident in, an oil reservoir normally too hot for germination and growth, explaining observations of reservoir souring following cold seawater injection.

Dynamics of Hydrology and Anaerobic Hydrocarbon Degrader Communities in A Tar-Oil Contaminated Aquifer.

Aquifers are typically perceived as rather stable habitats, characterized by low biogeochemical and microbial community dynamics. Upon contamination, aquifers shift to a perturbed ecological status, in which specialized populations of contaminant degraders establish and mediate aquifer restoration. However, the ecological controls of such degrader populations, and possible feedbacks between hydraulic and microbial habitat components, remain poorly understood. Here, we provide evidence of such couplings, via 4 years of annual sampling of groundwater and sediments across a high-resolution depth-transect of a hydrocarbon plume. Specialized anaerobic degrader populations are known to be established at the reactive fringes of the plume. Here, we show that fluctuations of the groundwater table were paralleled by pronounced dynamics of biogeochemical processes, pollutant degradation, and plume microbiota. Importantly, a switching in maximal relative abundance between dominant degrader populations within the Desulfobulbaceae and Desulfosporosinus spp. was observed after hydraulic dynamics. Thus, functional redundancy amongst anaerobic hydrocarbon degraders could have been relevant in sustaining biodegradation processes after hydraulic fluctuations. These findings contribute to an improved ecological perspective of contaminant plumes as a dynamic microbial habitat, with implications for both monitoring and remediation strategies in situ.

Selective elimination of bacterial faecal indicators in the Schmutzdecke of slow sand filtration columns.

Slow sand filtration (SSF) is an effective low-tech water treatment method for pathogen and particle removal. Yet despite its application for centuries, it has been uncertain to which extent pathogenic microbes are removed by mechanical filtration or due to ecological interactions such as grazing and competition for nutrients. In this study, we quantified the removal of bacterial faecal indicators, Escherichia coli and Enterococcus faecalis, from secondary effluent of a wastewater treatment plant and analysed the microbial community composition in compartments of laboratory model SSF columns. The columns were packed with different sand grain sizes and eliminated 1.6-2.3 log units of faecal indicators, which translated into effluents of bathing water quality according to the EU directive (<500 colony forming units of E. coli per 100 ml) for columns with small grain size. Most of that removal occurred in the upper filter area, the Schmutzdecke. Within that same zone, total bacterial numbers increased however, thus suggesting a specific elimination of the faecal indicators. The analysis of the microbial communities also revealed that some taxa were removed more from the wastewater than others. These results accentuate the contribution of biological mechanisms to water purification in SSF.

Enhanced gene detection assays for fumarate-adding enzymes allow uncovering of anaerobic hydrocarbon degraders in terrestrial and marine systems.

The detection of anaerobic hydrocarbon degrader populations via catabolic gene markers is important for the understanding of processes at contaminated sites. Fumarate-adding enzymes (FAEs; i.e., benzylsuccinate and alkylsuccinate synthases) have already been established as specific functional marker genes for anaerobic hydrocarbon degraders. Several recent studies based on pure cultures and laboratory enrichments have shown the existence of new and deeply branching FAE gene lineages, such as clostridial benzylsuccinate synthases and homologues, as well as naphthylmethylsuccinate synthases. However, established FAE gene detection assays were not designed to target these novel lineages, and consequently, their detectability in different environments remains obscure. Here, we present a new suite of parallel primer sets for detecting the comprehensive range of FAE markers known to date, including clostridial benzylsuccinate, naphthylmethylsuccinate, and alkylsuccinate synthases. It was not possible to develop one single assay spanning the complete diversity of FAE genes alone. The enhanced assays were tested with a range of hydrocarbon-degrading pure cultures, enrichments, and environmental samples of marine and terrestrial origin. They revealed the presence of several, partially unexpected FAE gene lineages not detected in these environments before: distinct deltaproteobacterial and also clostridial bssA homologues as well as environmental nmsA homologues. These findings were backed up by dual-digest terminal restriction fragment length polymorphism diagnostics to identify FAE gene populations independently of sequencing. This allows rapid insights into intrinsic degrader populations and degradation potentials established in aromatic and aliphatic hydrocarbon-impacted environmental systems.

Testing the limits of 454 pyrotag sequencing: reproducibility, quantitative assessment and comparison to T-RFLP fingerprinting of aquifer microbes.

The characterization of microbial community structure via 16S rRNA gene profiling has been greatly advanced in recent years by the introduction of amplicon pyrosequencing. The possibility of barcoding gives the opportunity to massively screen multiple samples from environmental or clinical sources for community details. However, an on-going debate questions the reproducibility and semi-quantitative rigour of pyrotag sequencing, similar to the early days of community fingerprinting. In this study we demonstrate the reproducibility of bacterial 454 pyrotag sequencing over biological and technical replicates of aquifer sediment bacterial communities. Moreover, we explore the potential of recovering specific template ratios via quantitatively defined template spiking to environmental DNA. We sequenced pyrotag libraries of triplicate sediment samples taken in annual sampling campaigns at a tar oil contaminated aquifer in Düsseldorf, Germany. The abundance of dominating lineages was highly reproducible with a maximal standard deviation of ~4% read abundance across biological, and ~2% across technical replicates. Our workflow also allows for the linking of read abundances within defined assembled pyrotag contigs to that of specific 'in vivo' fingerprinting signatures. Thus we demonstrate that both terminal restriction fragment length polymorphism (T-RFLP) analysis and pyrotag sequencing are capable of recovering highly comparable community structure. Overall diversity was roughly double in amplicon sequencing. Pyrotag libraries were also capable of linearly recovering increasing ratios (up to 20%) of 16S rRNA gene amendments from a pure culture of Aliivibrio fisheri spiked to sediment DNA. Our study demonstrates that 454 pyrotag sequencing is a robust and reproducible method, capable of reliably recovering template abundances and overall community structure within natural microbial communities.

Electron acceptor-dependent identification of key anaerobic toluene degraders at a tar-oil-contaminated aquifer by Pyro-SIP.

Bioavailability of electron acceptors is probably the most limiting factor in the restoration of anoxic, contaminated environments. The oxidation of contaminants such as aromatic hydrocarbons, particularly in aquifers, often depends on the reduction of ferric iron or sulphate. We have previously detected a highly active fringe zone beneath a toluene plume at a tar-oil-contaminated aquifer in Germany, where a specialized community of contaminant degraders codominated by Desulfobulbaceae and Geobacteraceae had established. Although on-site geochemistry links degradation to sulphidogenic processes, dominating catabolic (benzylsuccinate synthase α-subunit, bssA) genes detected in situ appeared to be more related to those of Geobacter spp. Therefore, a stable isotope probing (SIP) incubation of sediment samples with (13)C(7)-toluene and comparative electron acceptor amendment was performed. We introduce pyrosequencing of templates from SIP microcosms as a powerful new strategy in SIP gradient interpretation (Pyro-SIP). Our results reveal the central role of Desulfobulbaceae in sulphidogenic toluene degradation in situ, and affiliate the detected bssA genes to this lineage. This and the absence of (13)C-labelled DNA of Geobacter spp. in SIP gradients preclude their relevance as toluene degraders in situ. In contrast, Betaproteobacteria related to Georgfuchsia spp. became labelled under iron-reducing conditions. Furthermore, secondary toluene degraders belonging to the Peptococcaceae detected in both treatments suggest the possibility of functional redundancy among anaerobic toluene degraders on site.