Addressing Water Contamination and Associated Health Issues through Community-Based Interventions: A Case Study in Khon Kaen Province.

A recent study conducted in Khon Kaen Province, Thailand, evaluated the effectiveness of a technology-assisted intervention aimed at improving water quality and addressing related health issues in communities around key water bodies. The intervention targeted health concerns associated with water contamination, including chronic kidney diseases, skin conditions, hypertension, and neurological symptoms. The study included water quality assessments and health evaluations of 586 residents and implemented a Learning Innovation Platform (LIP) across 13 communities. Results showed significant improvements in the community, including a decrease in hypertension and skin-related health issues, as well as enhanced community awareness and proficiency in implementing simple water quality assessments and treatment. The study demonstrated the value of a comprehensive, technology-driven community approach, effectively enhancing water quality and health outcomes, and promoting greater community awareness and self-sufficiency in managing environmental health risks.

Layer-by-Layer Biopolymer Assembly for the In Situ Fabrication of AuNP Plasmonic Paper-A SERS Substrate for Food Adulteration Detection.

Here, we introduce an environmentally friendly approach to fabricate a simple and cost-effective plasmonic paper for detecting food additives using surface-enhanced Raman spectroscopy (SERS). The plasmonic paper is fabricated by in situ growth of gold nanoparticles (AuNPs) on filter paper (FP). To facilitate this green fabrication process, we applied a double-layered coating of biopolymers, chitosan (CS) and alginate (ALG), onto the FP using a layer-by-layer (LbL) assembly through electrostatic interactions. Compared to single-layer biopolymer coatings, double-layered biopolymer-coated paper, ALG/CS/FP, significantly improves the reduction properties. Consequently, effective in situ growth of AuNPs can be achieved as seen in high density of AuNP formation on the substrate. The resulting plasmonic paper provides high SERS performance with an enhancement factor (EF) of 5.7 × 1010 and a low limit of detection (LOD) as low as 1.37 × 10-12 M 4-mercaptobenzoic acid (4-MBA). Furthermore, it exhibits spot-to-spot reproducibility with a relative standard deviation (RSD) of 8.2% for SERS analysis and long-term stability over 50 days. This paper-based SERS substrate is applied for melamine (MEL) detection with a low detection limit of 0.2 ppb, which is sufficient for monitoring MEL contamination in milk based on food regulations. Additionally, we demonstrate a simultaneous detection of ß-agonists, including ractopamine (RAC) and salbutamol (SAL), exhibiting the multiplexing capability and versatility of the plasmonic paper in food contaminant analysis. The development of this simple plasmonic paper through the LbL biopolymer assembly not only paves the way for novel SERS substrate fabrication but also broadens the application of SERS technology in food contaminant monitoring.

Development of a High-Accuracy, Low-Cost, and Portable Fluorometer with Smartphone Application for the Detection of Urinary Albumin towards the Early Screening of Chronic Kidney and Renal Diseases.

This study presents the development of a portable fluorometer with a smartphone application designed to facilitate the early screening of chronic kidney and renal diseases by enabling the sensitive detection of urinary albumin. Utilizing a fluorescence-based aptasensor, the device achieved a linear calibration curve (0.001-1.5 mg/mL) with a linearity of up to 0.98022 and a detection limit of 0.203 µg/mL for human serum albumin (HSA). The analysis of 130 urine samples demonstrated comparable performance between this study's fluorometer, a commercial fluorometer, and the standard automated method. These findings validate the feasibility of the portable fluorometer and aptasensor combination as a reliable instrument for the sensitive and specific measurement of HSA in urine samples. Moreover, the fluorometer's portability offers potential applications in portable point-of-care testing, enhancing its utility in clinical settings for early disease screening.

Ultrasensitive Detection of MicroRNA in Human Saliva via Rolling Circle Amplification Using a DNA-Decorated Graphene Oxide Sensor.

MicroRNAs (miRNAs) are a family of conserved small noncoding RNAs whose expression is associated with many diseases, including cancer. Salivary miRNAs are gaining popularity as noninvasive diagnostic biomarkers for cancer and other systemic disorders, but their use is limited by their low abundance and complicated detection procedure. Herein, we present a novel self-assembly approach based on rolling circle amplification (RCA) and graphene oxide (GO) for the ultrasensitive detection of miRNA21 and miRNA16 (miRNA oral cancer biomarkers in human saliva). First, target miRNA hybridizes with the RCA template. In the presence of DNA polymerase, the RCA reaction is induced and sequences matching the template are generated. Then, a nicking enzyme cuts the long ssDNA product into tiny pieces to obtain the amplified products. The DNA-decorated GO sensor was fabricated by preabsorbing the ssDNA fluorescence-labeled probe on the GO surface, resulting in fluorescence quenching. The DNA-decorated GO sensor could detect the amplified product via the self-assembly of dsDNA, leading to the desorption and recovery of the fluorescence-labeled probe. Under optimal conditions, the proposed system exhibited ultrasensitive detection; the detection limits of miRNA16 and miRNA21 were 8.81 and 3.85 fM, respectively. It showed a wide range of detection between 10 fM and 100 pM for miRNA16 and between 10 fM and 1 nM for miRNA16. It demonstrated high selectivity, distinguishing between 1- and 3-mismatch nucleotides in target miRNA. Overall, our proposed DNA-decorated GO sensor can accurately detect the salivary miRNAs and may potentially be used for the diagnosis and screening of early-stage oral cancer.

Effects of Boric Acid and Storage Temperature on the Analysis of Microalbumin Using Aptasensor-Based Fluorescent Detection.

The instability of human serum albumin (HSA) in urine samples makes fresh urine a requirement for microalbumin analyses using immunoturbidimetry. Here, we determined the ability of an aptasensor-based fluorescent platform to detect microalbumin in old, boric acid-preserved urine samples. Our results show that the cleavage site of protease enzymes on urine albumin protein differed from the binding position of the aptamer on HSA protein, suggesting the aptasensor may be effective for albumin detection in non-fresh urine. Furthermore, the addition of boric acid in urine samples over a short term (at ambient temperature (Ta) and 4 °C), long term (-20 and -80 °C), and following freeze-thawing (1-3 cycles) did not significantly affect albumin stability, as analyzed using the aptasensor. Therefore, boric acid stabilized has in urine stored over a short- and long-term. Thus, the aptasensor developed by us is applicable for HSA detection in boric acid-preserved urine that has been stored for 7-d at Ta and 4 °C, and in the long-term at -80 °C.

Fabrication of paper-based SERS substrate using a simple vacuum filtration system for pesticides detection.

Herein, we describe a simple and cost-effective fabrication of a paper-based SERS substrate by coating poly(diallyldimethylammonium chloride) (PDADMAC) and gold nanostars (AuNSs) on the filter paper using a vacuum filtration system. The paper-based SERS substrates were fabricated and ready to be used within an hour without any complicated equipment or processes. The cationic polymer, PDADAMAC, was pretreated on the filter paper to improve the absorbability of negatively charged AuNSs through electrostatic interaction. The PDADMAC/AuNS paper significantly intensified the SERS signal of 4-mercaptobenzoic acid (4-MBA) compared to that of pure AuNS-coated paper due to the high density of AuNSs absorbed on the SERS substrate. The PDADMAC/AuNS paper substrate provided a SERS enhancement factor (EF) of 1.08 × 107 with a low detection limit of 1 nM 4-MBA. The substrate shows excellent spot-to-spot reproducibility with a relative standard deviation (RSD) of 5.03%, and substrate-to-substrate reproducibility with an RSD of 3.20% for the Raman shift at 1080 cm-1. The paper substrate was then applied for the rapid detection of pesticides with a low detection limit of 0.51 µM (0.13 ppm) for paraquat, and 0.38 µM (0.09 ppm) for thiram, using a handheld Raman spectrometer. The development of this simple and cost-effective paper-based SERS substrate, and its applications for on-site monitoring of pesticides, could be beneficial for food security and environmental safety.

Development of electrochemical biosensors for simultaneous multiplex detection of microRNA for breast cancer screening.

A highly sensitive electrochemical biosensors has been developed for the detection of multiplex micro ribonucleic acids (miRNAs) by modifying an electrode with reduced graphene oxide/poly(2-aminobenzylamine)/gold nanoparticles and adopting porous, hollow silver-gold nanoparticles as tagged labeling with metal ions. In addition, an anti-deoxyribonucleic acid (DNA)-RNA hybrid [S9.6] antibody was used to detect different hybridized capture DNAs and miRNAs that can detect multiple miRNAs simultaneously. The developed electrochemical platform exhibits high selectivity, stability, and sensitivity with a wide linear range from 1 fM to 10 nM and a low detection limit of 0.98 fM, 3.58 fM, and 0.25 fM for miRNA-155, miRNA-21, and miRNA-16, respectively. In addition, the proposed electrochemical biosensor capable for the simultaneous detection of miRNA-155, miRNA-16, and miRNA-21, which are breast cancer biomarkers, in normal human serum, can be adopted and potentially used for breast cancer screening.

Dual sensitive and rapid detection of glycated human serum albumin using a versatile lead/graphene nanocomposite probe as a fluorescence-electrochemical aptasensor.

Monitoring of glycated human serum albumin (GHSA) as a glycemic marker for screening and monitoring of diabetes mellitus is widely practiced for patients with conditions that affect red blood cells. In this study, a complex comprising Pb ions adsorbed on graphene oxide (GO-Pb) was fabricated and utilized as a versatile probe in a fluorescence-electrochemical aptasensor for GHSA quantification. To simplify the aptasensor, the GO-Pb complex probe was prepared via an ion adsorption process. After modification with a fluorophore-labeled aptamer, the GO-Pb complex served as an excellent energy acceptor in fluorescence-based analysis, as well as generating a high current in the electrochemical transducer. Additionally, the proposed platform can detect GHSA via the dual technique from a single sample, allowing for precise and accurate results. Under optimal conditions, the fluorescence-electrochemical aptasensor exhibited a linear relationship with GHSA concentrations from 0.001 to 80 µg mL-1 and from 0.005 to 10 µg mL-1 for fluorescence and electrochemical detection, respectively. The corresponding detection limits were 8.80 ng mL-1 and 0.77 ng mL-1, respectively. The proposed aptasensor additionally displayed good selectivity and excellent stability. Moreover, its successful application in the analysis of clinical samples further demonstrated its utility. Therefore, the proposed platform has significant potential as a novel, facile, highly responsive, and low-cost monitoring method for the development of diabetes mellitus diagnostic devices intended for a clinical setting.

Immobilization-Free Electrochemical Sensor Coupled with a Graphene-Oxide-Based Aptasensor for Glycated Albumin Detection.

An immobilization-free electrochemical sensor coupled with a graphene oxide (GO)-based aptasensor was developed for glycated human serum albumin (GHSA) detection. The concentration of GHSA was monitored by measuring the electrochemical response of free GO and aptamer-bound GO in the presence of glycated albumin; their currents served as the analytical signals. The electrochemical aptasensor exhibited good performance with a base-10 logarithmic scale. The calibration curve was achieved in the range of 0.01-50 µg/mL. The limit of detection (LOD) was 8.70 ng/mL. The developed method was considered a one-drop measurement process because a fabrication step and the probe-immobilization process were not required. This simple sensor offers a cost-effective, rapid, and sensitive detection method, and could be an alternative approach for determination of GHSA levels.