Steam assisted slow pyrolysis of contaminated biomasses: Effect of plant parts and process temperature on heavy metals fate.

The post-treatment of biomass from phytoremediation is not yet a well-established practice due to the risk induced by the presence of Potentially Toxic Elements (PTEs). Pyrolysis is a thermochemical treatment that reduces the volume and weight of contaminated matter producing a combustible vapor phase and a solid residue (char). A key factor enhancing the economic and the environmental sustainability of biomass valorization through pyrolysis is the production of a market value char. A proper choice of the pyrolysis operating conditions should take into account the effect of final temperature on PTEs release, on the char physicochemical properties as well as on the mobility of retained PTEs. In particular, in this work the influence of both the temperature and the plant parts is discussed (branches and leaves of Populus Nigra L. and rhizomes and culms of Arundo donax L.) on the release of Cd, Pb, Cu, and Zn in the temperature range 653-873 K under steam assisted slow pyrolysis conditions. The mobility of the heavy metals retained in the chars was also studied as well as the product yields, the gas composition and char porosity. The results suggested that in presence of Cd it is necessary to operate at low-temperature (lower than 703 K) to obtain a heavy metals free vapor phase fuel, whereas in presence of one or more metals among Pb, Cu, and Zn, it is possible to conduct a pyrolytic treatment at higher temperatures, thus obtaining a char with high BET surface area and lower metals mobility.

An Integrated Approach for the Environmental Characterization of a Wide Potentially Contaminated Area in Southern Italy.

This paper deals with the environmental characterization of a large and densely populated area, with a poor reputation for contamination, considering the contribution of environmental features (air, soil, soil hydraulic and groundwater) and the potential effects on human health. The use of Geographic Information System (GIS) has made possible a georeferenced inventory and, by overlaying environmental information, an operational synthesis of comprehensive environmental conditions. The cumulative effects on environmental features were evaluated, taking into account superposition effects, by means of the Spatial MultiCriteria Decision Analysis (S-MCDA). The application of the S-MCDA for converging the combination of heterogeneous factors, related to soil, land and water, deeply studied by heterogeneous groups of experts, constitutes the novelty of the paper. The results confirmed an overall higher potential of exposure to contaminants in the environment and higher mortality rates in the study area for some tumours, but hospital admissions for tumours were generally similar to the regional trend. Besides, mortality data may be strictly dependent on the poor socioeconomic conditions, quality of therapy and a lack of welfare in the area relative to the rest of Italy. Finally, as regards the possible relationship between presence of contaminants in the environment and health conditions of the population no definite conclusions can be drawn, although the present study encourages the use of the new proposed methods, that increase the possibilities for studying the combined effect of more environmental factors.

Pyrolysis for exploitation of biomasses selected for soil phytoremediation: Characterization of gaseous and solid products.

Biomasses to be used in the phytoremediation process are generally selected to match agronomic parameters and heavy metals uptake ability. A proper selection can be made greatly effective if knowledge of the properties of the residual char from pyrolysis is available to identify possible valorization routes. In this study a comparative analysis of the yields and characteristics of char obtained from slow pyrolysis of five uncontaminated biomasses (Populus nigra, Salix alba, Fraxinus oxyphylla, Eucalyptus occidentalis and Arundo donax) was carried out under steam atmosphere to better develop char porosity. Moreover, the dependence of the properties of solid residue on the process final temperature was studied for E. occidentalis in the temperature range of 688-967K. The results demonstrate that, among the studied biomasses, chars from P. nigra and E. occidentalis have to be preferred for applications regulated by surface phenomena given their highest surface area (270-300m2/g), whereas char from E. occidentalis is the best choice when the goal is to maximize energy recovery.

Photogrammetry for environmental monitoring: the use of drones and hydrological models for detection of soil contaminated by copper.

Campania Region of Southern Italy has a complex environmental situation, due to geogenic and anthropogenic soil pollution. Some of the pollutants such as copper are mobilized in the organic matter. It has been shown that wetlands provide physical as well as biogeochemical barriers against pollutants. Therefore, the objective of this study was to introduce and test an innovative approach able to predict copper accumulation points at plot scales, using a combination of aerial photos, taken by drones, micro-rill network modelling and wetland prediction indices usually used at catchment scales. Data were collected from an area measuring 4500 m(2) in Trentola Ducenta locality of Caserta Province of southern Italy. The photos processing with a fifth generation software for photogrammetry resulted in a high resolution Digital Elevation Model (DEM), used to study micro-rill processes. The DEM was also used to test the ability of Topographic Index (TI) and the Clima-Topographic Index (CTI) to predict copper sedimentation points at plot scale (0.1-10 ha) by comparing the map of the predicted and the actual copper distribution in the field. The DEM obtained with a resolution of 30 mm showed a high potential for the study of micro-rill processes and TI and CTI indices were able to predict zones of copper accumulation at a plot scale.

Indirect field technology for detecting areas object of illegal spills harmful to human health: application of drones, photogrammetry and hydrological models.

The accumulation of heavy metals in agricultural soils is a serious environmental problem. The Campania region in southern Italy has higher levels of cancer risk, presumably due to the accumulation of geogenic and anthropogenic soil pollutants, some of which have been incorporated into organic matter. The aim of this study was to introduce and test an innovative, field-applicable methodology to detect heavy metal accumulation using drone-based photogrammetry and microrill network modelling, specifically to generate wetlands wetlands prediction indices normally applied at large catchment scales, such as a large geographic basin. The processing of aerial photos taken using a hexacopter equipped with fifth-generation software for photogrammetry allowed the generation of a digital elevation model (DEM) with a resolution as high as 30 mm. Not only this provided a high potential for the study of micro-rill processes, but it was also useful for testing and comparing the capability of the topographic index (TI) and the clima-topographic index (CTI) to predict heavy metal sedimentation points at scales from 0.1 to 10 ha. Our results indicate that the TI and CTI indices can be used to predict points of heavy metal accumulation for small field catchments.

The environmental impact of buffalo manure in areas specialized in mozzarella production, southern Italy.

Buffalo livestock plays a central role in the regional economy in some areas of southern Italy, through the production of mozzarella cheese. With about 250,000 heads per utilizable agricultural area (equal to 107,400 ha), livestock husbandry is intensive. An important issue with regard to high animal density is manure management, an activity determined by cost optimization and the laws governing environmental sustainability. According to community, national and international rules (European Directive 91/676, Italian rules 152/99 and 258/00), nitrate leakage is considered a pollution indicator related to breeding activities and must be kept within limits. Simulation studies were carried out in the Italian province of Caserta to evaluate the impact of leakage on groundwater. Manure was also collected from 35 livestock farms and the nitrogen content measured in the laboratory. The results showed an average content of 2 kg/m3 of nitrogen, corresponding to 50 kg per animal and year, while the nitrate concentrations in the groundwater were found to be lower than those predicted by simulation. The nitrogen content found in buffalo manure <60% of the standard content produced by the bovine species (on average 83 kg nitrogen per adult animal per year). The fact that the bovine species is used as the standard reference for legislation on nitrogen production explains the inconsistency observed between the impact of buffalo livestock on the environment predicted by simulation and the nitrate concentration measured in the groundwater. Although it would be out of line with current regulations, it would theoretically be possible to increase the buffalo load on the territory without environmentally negative effects. Therefore, in this context, the common referral points, i.e. the American Midwest Point Service and others usually consulted for the assessment of livestock impact in terms of nutritional excretion and the risk of pollution for the environment, should be revisited.