Manufacturing and Characterization of Wide-Bundle Bamboo Scrimber: A Comparison with Other Engineered Bamboo Composites.

Controlling the variability in mat structure and properties in bamboo scrimber (BS) is key to producing the product for structural applications, and wide strip scrimber (WBS) is an effective approach. In this study, the effects of scrimmed bamboo bundle morphology and product density on the properties of WBS were investigated. WBS panels were manufactured and tested using wide (200 to 250 mm) bamboo strips with different fiberization intensity. Maximum strength properties (flexural, compressive, and shear strength), and lowest thickness swelling and water absorption were achieved with three or four passes due to the higher resin absorption by strips. For balanced product cost and performance, we recommend 1-2 fiberization passes and a panel density of 0.9-1.0 g/cm3. Panel mechanical properties were compared with other common bamboo composites. Bamboo scrimber products were highly variable in properties due to differing manufacturing processes, element treatments, and suboptimal mat structure. Products including laminated bamboo lumber and flattened bamboo made from nonfiberized elements show markedly different relationships between strength and elastic properties mostly due to inadequate bonding between the laminae, which causes premature bond-line failure. This study helped improve the understanding of the structure-property relationship of engineered bamboo products while providing insights into process optimization.

Cromosomopatías en pacientes con cáncer sometidos a radioterapia con cobalto 60 / Chromosomopathies in cancer patients undergoing cobalt 60 radiotherapy

Objetivo: Describir las aberraciones citogenéticas que pueden ser observadas por medio de la técnica Giemsa en fluorescencia y encontradas en pacientes con cáncer antes y después de ser sometidos a tratamiento con radioterapia. Métodos: Se analizó un mínimo de 200 metafases en primera división mitótica antes y después del tratamiento de radioterapia en nueve pacientes que asistieron a la sección de radioterapia del Hospital San Juan de Dios Costa Rica. En cada caso se contabilizó cada tipo de cromosomopatía por medio de la prueba de Giemsa en fluorescencia y utilizando bromodeoxiuridina y naranja de acridina. Resultados: Las cromosomopatías producidas por radioterapia se observaron tanto antes como después del tratamiento sin embargo destacó el incremento en la frecuencia de los cromosomas dicéntricos y anillos céntricos una vez finalizada la terapia. La frecuencia de fracturas cromatídicas de asociaciones satelíticas y de alteraciones morfológicas no se ve afectada por la radioterapia. Uno de los participantes presentó un recuento mitótico bajo. Conclusión: La radioterapia aumenta significativamente la frecuencia de los cromosomas dicéntricos y dicéntricos más anillos en la muestra en estudio. Este trabajo es relevante por ser el primer estudio en Costa Rica en el que se analizan los cromosomas dicéntricos como biomarcadores de exposición a radiaciones ionizantes mediante la prueba de Giemsa en fluorescencia y utilizando bromodeoxiuridina y naranja de acridina.

Aim: The objective of this study was to describe the before and after cytogenetic aberrations found in current patients of radiotherapy. This can be observed through the technique called "Giemsa in fluorescence" Methods: A minimum of 200 metaphases were analyzed in the first mitotic division in 9 patients. The patients where observed before and after radiotherapy treatment at the San Juan de Dios Hospital in Costa Rica. In each case any type of chromosomopathy was counted using the "Giemsa in fluorescence" test as well as Bromodeoxyuridine and acridine orange. Results: The chromosomopathies are observed before and after treatment with radiotherapy. The treatment seems to change the frecuency increasing the dicentric chromosomes and centric rings after the treatment. The frequency of chromatid fractures satellite associations and morphological alterations were not affected by radiotherapy. Conclusion: The chromosomopathies produced by radiotherapy were observed both before and after treatment with variations in their frequency. After radiotherapy dicentric chromosomes and dicentric chromosomes plus rings frequencies increased significantly. A low mitotic count was present this could have been the result of radiation on the bone marrow or by the cell repair and apoptosis system. The standardized " Fluorescence Plus Giemsa" test using Bromodesoxyuridine and acridine orange was used for the fiesta time in Costa Reica. This allowed for the measurement of radiation exposure used in the treatment or detection of diseases and cancer in pacients.

Characterizing Mat Formation of Bamboo Fiber Composites: Horizontal Density Distribution.

Bamboo fiber composite (BFC) is a unidirectional and continuous bamboo fiber composite manufactured by consolidation and gluing of flattened, partially separated bamboo culm strips into thick and dense panels. The composite mechanical properties are primarily influenced by panel density, its variation and uniformity. This paper characterized the horizontal density distribution (HDD) within BFC panels and its controlling factors. It revealed that HDD follows a normal distribution, with its standard deviation (SD) strongly affected by sampling specimen size, panel thickness and panel locations. SD was lowest in the thickest (40 mm) panel and largest-size (150 × 150-mm2) specimens. There was also a systematic variation along the length of the BFC due to the tapering effect of bamboo culm thickness. Density was higher along panel edges due to restraint from the mold edges during hot pressing. The manual BFC mat forming process is presented and found to effectively minimize the density variation compared to machine-formed wood composites. This study provides a basic understanding of and a quality control guide to the formation uniformity of BFC products.

Fetal Endoscopic Tracheal Intubation: A New Fetoscopic Procedure to Ensure Extrauterine Tracheal Permeability in a Case with Congenital Cervical Teratoma.

Congenital neck masses are associated with high perinatal mortality and morbidity secondary to airway obstruction due to a mass effect of the tumor with subsequent neonatal asphyxia and/or neonatal death. Currently, the only technique designed to establish a secure neonatal airway is the ex utero intrapartum treatment (EXIT) procedure, which involves neonatal tracheal intubation while fetal oxygenation is maintained by the uteroplacental circulation in a partial fetal delivery under maternal general anesthesia. We present a case with a giant cervical teratoma and huge displacement and compression of the fetal trachea that was treated successfully at 35 weeks of gestation with a novel fetoscopic procedure to ensure extrauterine tracheal permeability by means of a fetal endoscopic tracheal intubation (FETI) before delivery. The procedure consisted of a percutaneous fetal tracheoscopy under maternal epidural anesthesia using an 11-Fr exchange catheter covering the fetoscope that allowed a conduit to introduce a 3.0-mm intrauterine orotracheal cannula under ultrasound guidance. After FETI, a conventional cesarean section was performed uneventfully with no need for an EXIT procedure. This report is the first to illustrate that in cases with large neck tumors involving fetal airways, FETI is feasible and could potentially replace an EXIT procedure by allowing prenatal airway control.