Saltiness perception in gel-based food systems (gels and emulsion-filled gels).

Reducing salt in food without compromising its quality is a huge challenge. Some review articles have been recently published on saltiness perception in some colloidal systems such as emulsions. However, no published reviews are available on saltiness perceptions of gel-based matrices, even though salt release and perception in these systems have been extensively studied. This article reviews the recent advances in salt perception in gel-based systems and provides a detailed analysis of the main factors affecting salt release. Strategies to enhance saltiness perception in gels and emulsion-filled gels are also reviewed. Saltiness perception can be improved through addition of biopolymers (proteins and polysaccharides) due to their ability to modulate texture and/or to adhere to or penetrate through the mucosal membrane on the tongue to prolong sodium retention. The composition of the product and the distribution of salt within the matrix are the two main factors affecting the perception of salty taste. Food structure re-design can lead to control the level of interaction between the salt and other components and change the structure, which in turn affects the mobility and release of the salt. The change of ingredients/matrix can affect the texture of the product, highlighting the importance of sensory evaluation.

Current Applications of Liposomes for the Delivery of Vitamins: A Systematic Review.

Liposomes have been used for several decades for the encapsulation of drugs and bioactives in cosmetics and cosmeceuticals. On the other hand, the use of these phospholipid vesicles in food applications is more recent and is increasing significantly in the last ten years. Although in different stages of technological maturity-in the case of cosmetics, many products are on the market-processes to obtain liposomes suitable for the encapsulation and delivery of bioactives are highly expensive, especially those aiming at scaling up. Among the bioactives proposed for cosmetics and food applications, vitamins are the most frequently used. Despite the differences between the administration routes (oral for food and mainly dermal for cosmetics), some challenges are very similar (e.g., stability, bioactive load, average size, increase in drug bioaccessibility and bioavailability). In the present work, a systematic review of the technological advancements in the nanoencapsulation of vitamins using liposomes and related processes was performed; challenges and future perspectives were also discussed in order to underline the advantages of these drug-loaded biocompatible nanocarriers for cosmetics and food applications.

High-shear wet agglomeration process for enriching cornstarch with curcumin and vitamin D3 co-loaded lyophilized liposomes.

Curcumin and vitamin D3 are bioactive molecules of great importance for the food industry. However, their low stability in several processing conditions hampers their proper incorporation into powdered food formulations. This study proposes the enrichment of a common raw material (cornstarch) with curcumin and vitamin D3 by using high-shear wet agglomeration. The bioactives were initially encapsulated into liposome dispersions and then subjected to lyophilization. The resulting dried vesicles were later incorporated into cornstarch by wet agglomeration using maltodextrin as the binder solution. The phospholipid content and the amount of added liposomes were evaluated to characterize the enriched cornstarch samples. The lyophilized vesicles showed a high retention rate of 99 % for curcumin and vitamin D3, while the enriched cornstarch samples retained above 96 % (curcumin) and 98 % (vitamin D3) after 30 days of controlled storage. All in all, the presence of dried liposomes improved the flowability and delayed retrogradation phenomenon in agglomerated cornstarch. Therefore, this study introduced a novel and reliable method of incorporating hydrophobic and thermosensitive molecules into powdered food formulations by using readily available materials and a straightforward high-shear wet agglomeration process.

Microstructural Analysis of Whey/Soy Protein Isolate Mixed Gels Using Confocal Raman Microscopy.

This work explores the potential of confocal Raman microscopy to investigate the microstructure of mixed protein gel systems. Heat-set protein gels were prepared using whey protein isolate (WPI), soy protein isolate (SPI), and mixtures thereof, with a total of five different whey-to-soy protein ratios (100, 75, 50, 25, and 0%). These were analysed using confocal Raman microscopy, and different data analysis approaches were used to maximize the amount of structural and compositional information extracted from the spectral datasets generated, including both univariate and multivariate analysis methods. Small spectral differences were found between pure WPI and SPI gels, mainly attributed to conformational differences (amide bands), but SPI exhibited considerably greater auto-fluorescence than WPI. The univariate analysis method allowed for a rapid microstructural analysis, successfully mapping the distribution of protein and water in the gels. The greater fluorescence of the capsule-like structures found in the mixed gels, compared to other regions rich in proteins, suggested that these may be enriched in soy proteins. Further analysis, using a multivariate approach, allowed us to distinguish proteins with different levels of hydration within the gels and to detect non-proteinaceous compounds. Raman microscopy proved to be particularly useful to detect the presence of residual lipids in protein gels.

Curcumin-loaded proliposomes produced by the coating of micronized sucrose: Influence of the type of phospholipid on the physicochemical characteristics of powders and on the liposomes obtained by hydration.

The feasibility of producing proliposomes containing curcumin, as well as liposome dispersions, using different mixtures of purified and nonpurified soybean phospholipids was studied. Proliposomes were produced through coating of micronized sucrose and physicochemically characterized over 30 days of storage. In addition, the possible interactions among the components were investigated using X-ray powder diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). The proliposomes demonstrated a low propensity of water adsorption and low hygroscopicity. In addition, the curcumin content retained in the powders ranged from 67 to 92%. The liposomes were produced following proliposome hydration. Atomic force microscopy indicated the vesicles presented spherical shapes and photon correlation spectroscopy detected that their hydrodynamic diameters ranged from 207 to 222 nm. Finally, the curcumin-loaded liposomes preserved up to 63% of the bioactive compound but remained stable for only 15 days of storage.

Physicochemical characterization and sensory evaluation of yogurts incorporated with beta-carotene-loaded solid lipid microparticles stabilized with hydrolyzed soy protein isolate.

Beta-carotene is an extremely interesting bioactive compound in the food industry due to its antioxidant capacity and pro-vitamin A activity. However, its incorporation into food products can be challenging, as it is highly hydrophobic and chemically unstable. The aim of this study was to evaluate the feasibility of incorporating beta-carotene-loaded solid lipid microparticles (SLMs) stabilized with a hydrolyzed soy protein isolate in yogurt. The SLMs were produced using palm stearin as the lipid phase. Microparticle dispersions containing only beta-carotene and both beta-carotene and alpha-tocopherol were incorporated into yogurts, comprising 5% of its total mass. This addition itself was efficient to provide color, and the presence of the lipid microparticles did not change the physicochemical or the rheological characteristics of the product. Based on the sensory evaluation, the panelists approved the yogurt, as average grades of global acceptance were around 8.0 ("liked it very much") on the hedonic scale.

Antifungal activity of nanoemulsions encapsulating oregano (Origanum vulgare) essential oil: in vitro study and application in Minas Padrão cheese

ABSTRACT The objective of this study was to evaluate the antifungal activity of nanoemulsions encapsulating essential oil of oregano (Origanum vulgare), both in vitro and after application on Minas Padrão cheese. Nanodispersions were obtained by the phase inversion temperature method. Cladosporium sp., Fusarium sp., and Penicillium sp. genera were isolated from cheese samples and used to evaluate antifungal activity. Minimal inhibitory concentrations of non-encapsulated and encapsulated oregano essential oil were determined, and they were influenced by the encapsulation of the essential oil depending on the type of fungus. The antifungal activity of the nanoencapsulated oregano essential oil in cheese slices showed no evidence of an effect of the MICs, when applied in the matrix. On the other hand, an influence of contact time of the nanoemulsion with the cheese was observed, due to the increase in water activity. It was concluded that nanoencapsulated oregano essential oil presented an inhibitory effect against the three genera of fungi evaluated. If environmental parameters, such as storage temperature and water activity, were controlled, the inhibitory effect of nanoemulsions of oregano oil could possibly be greatly improved, and they could be presented as a potential alternative for the preservation of Minas Padrão cheese against fungal contamination.

Antifungal activity of nanoemulsions encapsulating oregano (Origanum vulgare) essential oil: in vitro study and application in Minas Padrão cheese.

The objective of this study was to evaluate the antifungal activity of nanoemulsions encapsulating essential oil of oregano (Origanum vulgare), both in vitro and after application on Minas Padrão cheese. Nanodispersions were obtained by the phase inversion temperature method. Cladosporium sp., Fusarium sp., and Penicillium sp. genera were isolated from cheese samples and used to evaluate antifungal activity. Minimal inhibitory concentrations of non-encapsulated and encapsulated oregano essential oil were determined, and they were influenced by the encapsulation of the essential oil depending on the type of fungus. The antifungal activity of the nanoencapsulated oregano essential oil in cheese slices showed no evidence of an effect of the MICs, when applied in the matrix. On the other hand, an influence of contact time of the nanoemulsion with the cheese was observed, due to the increase in water activity. It was concluded that nanoencapsulated oregano essential oil presented an inhibitory effect against the three genera of fungi evaluated. If environmental parameters, such as storage temperature and water activity, were controlled, the inhibitory effect of nanoemulsions of oregano oil could possibly be greatly improved, and they could be presented as a potential alternative for the preservation of Minas Padrão cheese against fungal contamination.

Stability of curcumin encapsulated in solid lipid microparticles incorporated in cold-set emulsion filled gels of soy protein isolate and xanthan gum.

The objective of this study was to investigate the feasibility of producing cold-set emulsion filled gels (EFG), using soy protein isolate (SPI) and xanthan gum (XG) and incorporating curcumin-loaded solid lipid microparticles (SLM). For this purpose, the formulation GXG (15%, w/v SPI, 0.1%, w/v XG and 5mM CaCl2) was selected for the production of EFG. A comparative study on the rheological and microstructural properties of non-filled gels and EFG revealed that SLM stabilized with Tween 80-Span 80 behaved as active fillers in the gel matrix, increasing the Young's modulus from 1.1 to 2.3kPa, and also increasing the values of storage and loss moduli. The incorporation of SLM also affected the microstructural organization of the systems. Whereas unfilled gels presented a microstructural organization similar to that of interpenetrated networks, EFG exhibited a microstructure with clear phase separation. The stability of encapsulated curcumin in EFG was monitored using a colorimetric test and it was confirmed that the bioactive component showed a high stability for 15days. After that period, the color started to change, indicating a decrease in curcumin concentration. The instability of curcumin was probably related to structural alterations of the EFG, which led to decreases of hardness after 7days of storage at 10°C, and to the collapse of the structures after 30days. Although formulation improvements are required, the results indicate that the encapsulation of curcumin in SLM incorporated in EFG is a potential alternative for the replacement of yellow artificial dyes in gelled food products.

Production of Cornstarch Granules Enriched with Quercetin Liposomes by Aggregation of Particulate Binary Mixtures Using High Shear Process.

Liposomes are colloidal structures capable of encapsulating, protecting, and releasing hydrophobic bioctives, as flavonoids. Quercetin is a flavonoid with high antioxidant activity that provides benefits to health. The wet-agglomeration processes in high-shear equipment are useful to produce granules from binary mixtures, obtaining a powder with homogeneous composition and without segregation or elutriation of fine particles. In this study, the binary mixtures containing microparticles of native cornstarch and nanoparticles of quercetin liposomes were aggregated in high-shear batches, using maltodextrin solution as binder agent. The cornstarch was enriched by agglomeration with 8%, 22%, and 30% (w/w) of quercetin-loaded lyophilized liposomes and the physical properties were evaluated. The moisture of all formulations showed similar values ranging from 4.42% to 4.57%. The values of hygroscopicity (g adsorbed water/100 g of dry matter) indicated the lyophilized liposomes were able to decrease the capacity of the agglomerated cornstarch to absorb water, decreasing the possibility of microbiological contamination. The addition of quercetin-loaded lyophilized liposomes improved the flowability and turned the powder (agglomerated cornstarch) less cohesive. The pasting properties of enriched agglomerated cornstarch decreased the pasting temperature about 10 °C, and the cornstarch agglomerated with 8% (w/w) of quercetin-loaded lyophilized liposomes showed no significance difference in the peak viscosity. Agglomeration of cornstarch with more than 8% (w/w) lyophilized liposomes decreased the tendency of starch to retrograde, which is very interesting for food products which requires low levels of retrogradation of granules for their stability. PRACTICAL APPLICATION: This study is an unprecedent association of 2 technologies, nanoencapsulation and wet agglomeration, here used together to enrich cornstarch with quercetin. The agglomeration process was used to obtain granules of cornstarch, an ingredient extremely used in the food industry, enriched with quercetin-loaded lyophilized liposomes. The goals were both the improvement of the nutritional quality and the increase of the added value of the cornstarch.

Encapsulation of Beta-carotene in Lipid Microparticles Stabilized with Hydrolyzed Soy Protein Isolate: Production Parameters, Alpha-tocopherol Coencapsulation and Stability Under Stress Conditions.

The objectives of this research were to study the encapsulation of beta-carotene (BC) in solid lipid microparticles (SLM) of palm stearin (PS) and stabilized with hydrolyzed soy protein isolate (HSPI), and also to investigate the effect of alpha-tocopherol (TOC) addition to the systems. Through the characterizations of SLM produced with different formulations, it was verified that systems with 5% (w/v) PS, 1.0% (w/v) HSPI, and 0.3% (w/v) xanthan gum (XG) presented the highest stability, with average diameters of approximately 1.2 µm. This formulation was applied for the production of BC-loaded SLM, with different concentrations of TOC. In SLM containing TOC, nearly 75% of encapsulated BC was preserved after 45 d of storage. The kinetic profiles for degradation of encapsulated BC were fitted to a pseudo-1st-order model, and the results showed that the main difference among the systems with different BC:TOC ratios was the residual concentration of BC. The stability of the BC-loaded SLMs was also studied after stress conditions, and the results showed that the SLMs were able to support thermal treatments over 60 °C but presented low stability after different ionic strength stresses.

Rheology of Emulsion-Filled Gels Applied to the Development of Food Materials.

Emulsion-filled gels are classified as soft solid materials and are complex colloids formed by matrices of polymeric gels into which emulsion droplets are incorporated. Several structural aspects of these gels have been studied in the past few years, including their applications in food, which is the focus of this review. Knowledge of the rheological behavior of emulsion-filled gels is extremely important because it can measure interferences promoted by droplets or particle inclusion on the textural properties of the gelled systems. Dynamic oscillatory tests, more specifically, small amplitude oscillatory shear, creep-recovery tests, and large deformation experiments, are discussed in this review as techniques present in the literature to characterize rheological behavior of emulsion-filled gels. Moreover, the correlation of mechanical properties with sensory aspects of emulsion-filled gels appearing in recent studies is discussed, demonstrating the applicability of these parameters in understanding mastication processes.

Essential oils as active ingredients of lipid nanocarriers for chemotherapeutic use.

Essential oils have increased interest as promising ingredients for novel pharmaceutical dosage forms. These oils are reported to provide synergistic effects of their active ingredients, in parallel with their biodegradable properties. In addition, essential oils may also have therapeutic effects in diabetes, inflammation, cancer and to treat microbial infections. However, there are some physicochemical properties that may limit their use as active compounds in several formulations, such as high volatility, low-appealing organoleptic properties, low bioavailability and physicochemical instability, as result of exposure to light, oxygen and high temperatures. To overcome these limitations, lipid colloidal carriers (e.g. liposomes, solid lipid nanoparticles (SLN), self nanoemulsified drug delivery systems (SNEDDS)) have been pointed out as suitable carriers to improve bioavailability, low solubility, taste, flavor and long-term storage of sensitive compounds. This paper reviews the potential beneficial effects of formulating essential oils in pharmaceutical applications using colloidal carriers as delivery systems.

Hydrophilic coating of mitotane-loaded lipid nanoparticles: preliminary studies for mucosal adhesion.

The aim of the present work was to load mitotane, an effective drug for adrenocortical carcinoma treatment, in solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC). The SLN and NLC were successfully prepared by high shear homogenization followed by hot high pressure homogenization. Formulations were composed of cetyl palmitate as the solid lipid for SLN, whereas for NLC PEGylated stearic acid was selected as solid lipid and medium chain triacylglycerols as the liquid lipid. Tween® 80 and Span® 85 were used as surfactants for all formulations. The particle size, zeta potential, polydispersity index (PI), encapsulation efficiency (EE), and loading capacity (LC) were evaluated. The SLN showed a mean particle size of 150 nm, PI of 0.20, and surface charge -10 mV, and the EE and LC could reach up to 92.26% and 0.92%, respectively. The NLC were obtained with a mean particle size of 250 nm, PI of 0.30, zeta potential -15 mV and 84.50% EE, and 0.84% LC, respectively. Hydrophilic coating of SLN with chitosan or benzalkonium chloride was effective in changing zeta potential from negative to positive values. The results suggest that mitotane was efficiently loaded in SLN and in NLC, being potential delivery systems for improving mitotane LC and controlled drug release.

Polymorphism, crystallinity and hydrophilic-lipophilic balance of stearic acid and stearic acid-capric/caprylic triglyceride matrices for production of stable nanoparticles.

There is an increasing interest in lipid nanoparticles because of their suitability for several administration routes. Thus, it becomes even more relevant the physicochemical characterization of lipid materials with respect to their polymorphism, lipid miscibility and stability, as well as the assessment of the effect of surfactant on the type and structure of these nanoparticles. This work focuses on the physicochemical characterization of lipid matrices composed of pure stearic acid or of mixtures of stearic acid-capric/caprylic triglycerides, for drug delivery. The lipids were analyzed by Differential Scanning Calorimetry (DSC), Wide Angle X-ray Diffraction (WAXD), Polarized Light Microscopy (PLM) and hydrophilic-lipophilic balance (HLB) in combination with selected surfactants to determine the best solid-to-liquid ratio. Based on the results obtained by DSC and WAXD, the selected qualitative and quantitative composition contributed for the production of stable nanoparticles, since the melting and the tempering processes provided important information on the thermodynamic stability of solid lipid matrices. The best HLB value obtained for stearic acid-capric/caprylic triglycerides was 13.8, achieved after combining these lipids with accepted surfactants (trioleate sorbitan and polysorbate 80 in the ratio of 10:90). The proposed combinations were shown useful to obtain a stable emulsion to be used as intermediate form for the production of lipid nanoparticles.