Inactivation of Bacillus subtilis spores and formation of bromate during ozonation.

Inactivation of B. subtilis spores with ozone was investigated to assess the effect of pH and temperature, to compare the kinetics to those for the inactivation of C. parvum oocysts, to investigate bromate formation under 2-log inactivation conditions, and to assess the need for bromate control strategies. The rate of B. subtilis inactivation with ozone was independent of pH, decreased with temperature (activation energy of 42,100 Jmol(-1)), and was consistent with the CT concept. B. subtilis was found to be a good indicator for C. parvum at 20-30 degrees C, but at lower temperatures B. subtilis was inactivated more readily than C. parvum. Bromate formation increased as both pH and temperature increased. For water with an initial bromide concentration of 33 microgl(-1), achieving 2-logs of inactivation, without exceeding the 100 microg l(-1) bromate standard, was most difficult at 30 degrees C for B. subtilis and at midrange temperatures (10-20 degrees C) for C. partum. pH depression and ammonia addition were found to reduce bromate formation without affecting B. subtilis inactivation, and may be necessary for waters containing more than 50 microgl(-1) bromide.

Bromate minimization during ozonation: mechanistic considerations.

Bromate formation during ozonation of bromide-containing natural waters is somewhat inversely connected to the ozone characteristics: an initial fast increase followed by a slower formation rate. During the initial phase mostly OH radical reactions contribute to bromate formation,whereas in the secondary phase both ozone and OH radicals are important. To minimize bromate formation several control options are presented: ammonia addition, pH depression, OH radical scavenging, and scavenging or reduction of hypobromous acid (HOBr) by organic compounds. Only the two first options are applicable in drinking watertreatment. By both methods a similar effect of a bromate reduction of approximately 50% can be achieved. However, bromate formation during the initial phase of the ozonation cannot be influenced by either method. Ammonia (NH3) efficiently scavenges HOBrto NH2Br. However, this reaction is reversible which leads to higher required NH3 concentrations than expected. The rate constant kNH2Br for the hydrolysis of NH2Br by OH- to NH3 and OBr- was found to be 7.5-10(6) M(-1) s(-1). pH depression shifts the HOBr/ OBr- equilibrium to HOBr and also affects the ozone chemistry. The effect on ozone chemistry was found to be more importantfor bromate formation. For a given ozone exposure, the OH radical exposure decreases with decreasing pH. Therefore, for pH depression the overall oxidation capacity for a certain ozone exposure decreases which in turn leads to a smaller bromate formation.

Simultaneous HPLC determination of peroxyacetic Acid and hydrogen peroxide.

The first instrumental method for simultaneous determination of peroxyacetic acid (PAA) and hydrogen peroxide has been developed. The successive quantitative reaction of PAA with methyl p-tolyl sulfide (MTS) and hydrogen peroxide with triphenylphosphine (TPP) yields the corresponding sulfoxide MTSO and phosphine oxide TPPO. The reagents and their oxides are separated by HPLC on reversed-phase columns with acetonitrile/water gradient elution within 5 min. External calibration with the solid standards of MTSO and TPPO leads to a very accurate and reliable method. Samples are stable and can be stored after derivatization for several days prior to analysis. Real samples from brewery disinfection were analyzed in comparison to titration with excellent correlation.