Clinically-implementable template plans for multidwell treatments using Leipzig-style applicators in 192Ir surface brachytherapy.

PURPOSE: Multiple dwell positions ("multidwell") within a Leipzig-style applicator can be used to increase dose uniformity and treatment area. Model-based dose calculation algorithms (MBDCAs) are necessary for accurate calculations involving these applicators because of their nonwater equivalency and complex geometry. The purpose of this work was to create template plans from MBDCA calculations and present their dwell times and positions for users of these applicators without access to MBDCAs. METHODS AND MATERIALS: The Leipzig-style solid applicator model within our treatment planning system was used to design template plans. Five template plans, normalized to 0.3 cm depth within a water phantom, were optimized using the treatment planning system MBDCA. Each template plan contained unique dwell positions, times, and active lengths (0.5-1.5 cm). A single-dwell distribution was optimized for comparison. The stem of this applicator stops within the shell; therefore, one template plan contained an intrafraction rotation to determine the largest dose distribution achievable. Effects of imperfect applicator rotation were quantified by inserting rotational offsets and comparing the V100%, D95%, and minimum dose coverage for planning target volumes created from 80%/90% isodose lines. RESULTS: The 90% (80%) isodose line dimensions at 0.3 cm depth for single-dwell increased from 0.94 × 0.97 (1.53 × 1.57) cm2 to 2.09 × 1.24 (2.75 × 1.88) cm2 in the largest template plan. Manually inserted angular offsets up to ±10° for the template plan requiring rotation preserved V100%, D95%, and minimum dose within 2.0%, 1.9%, and 8.0%, respectively. CONCLUSION: A set of template plans was created to provide accessibility to the multidwell methodology, even for users without access to MBDCAs. Each template plan should be reviewed before clinical implementation.

Feasibility of using multiple-dwell positions in 192Ir Leipzig-style brachytherapy surface applicators to expand target coverage and clinical application.

PURPOSE: Leipzig-style applicators for surface brachytherapy are traditionally used with a single-source dwell position. This study explores the feasibility of using multiple-source dwell positions ("multidwell") to improve the dose coverage and applicability of Leipzig-style applicators. METHODS AND MATERIALS: A virtual model of the Leipzig-style applicator was commissioned for a model-based dose calculation algorithm (MBDCA) and compared against American Association of Physicists in Medicine working group 186 benchmarking data sets and ionization chamber point measurements. An absolute dosimetry technique based on radiochromic film was used to validate both single-dwell and multidwell plans. RESULTS: Dose distributions generated from the MBDCA-based virtual model were consistent with working group data sets, ion chamber measurements, and radiochromic film analysis. In one multidwell configuration, at 3 mm prescription depth, the 80% isodose width was increased to 25 mm, compared with 15 mm in the same dimension for a single-dwell delivery. In the same multidwell configuration, the flatness, measured as >98% isodose line, was more than doubled to 8 mm, compared with 3 mm in the same dimension. For multidwell plans, 2-D planar agreement between radiochromic film and MBDCA exceeded 93% in gamma analysis (3%/1 mm criteria). Submillimeter positional agreement was found, with a total dosimetric uncertainty of 4.5% estimated for the entire system. CONCLUSIONS: Leipzig-style surface applicators with multiple-source dwell positions have been benchmarked against radiochromic film dosimetry. Results show that the clinically viable coverage area can be increased significantly.

Impact of Audiovisual-Assisted Therapeutic Ambience in Radiation Therapy (AVATAR) on Anesthesia Use, Payer Charges, and Treatment Time in Pediatric Patients.

PURPOSE: Pediatric radiation therapy (RT) requires optimal immobilization that often necessitates daily anesthesia. To decrease anesthesia use, we implemented a novel audiovisual-assisted therapeutic ambience in RT (AVATAR) system that projects video onto a radiolucent screen within the child's line of vision to provide attentional diversion. We investigated its reduction on anesthesia use, payer charges, and treatment time, in addition to its impact on radiation delivery. METHODS AND MATERIALS: A 6-year retrospective analysis was performed among children undergoing RT (n = 224) 3 years before and 3 years after the introduction of AVATAR. The frequency of anesthesia use before and after AVATAR implementation, in addition to RT treatment times, were compared. The number of spared anesthesia treatments allowed for a charge to payer analysis. To document the lack of surface dose perturbation by AVATAR, a phantom craniospinal treatment course was delivered both with and without AVATAR. Additionally, an ion chamber course was delivered to document changes to the dose at depth. RESULTS: More children were able to avoid anesthesia use entirely in the post-AVATAR cohort compared with the pre-AVATAR cohort (73.2% vs 63.4%; P = .03), and fewer required anesthesia for each treatment (18.8% vs 33%; P = .03). AVATAR introduction reduced anesthesia use for all ages studied. Treatment time per session was reduced by 38% using AVATAR compared with anesthesia. There were 326 fewer anesthesia sessions delivered over 3 years after AVATAR was introduced, with an estimated savings of >$500,000. Optically stimulated luminescent dosimeters revealed a small increase in dose of 0.8% to 9.5% with AVATAR, whereas the use of a thermomolded face mask increased skin dose by as much as 58%. CONCLUSIONS: AVATAR introduction decreased anesthesia use in children undergoing RT. More children avoided anesthesia entirely, and fewer needed anesthesia for every treatment, resulting in a reduction in treatment time and savings of nearly $550,000 in approximately 3 years, with minimal perturbation of RT dose delivery.

A Feasibility Study of Single-inhalation, Single-energy Xenon-enhanced CT for High-resolution Imaging of Regional Lung Ventilation in Humans.

RATIONALE AND OBJECTIVES: The objective of this study was to assess the feasibility of single-inhalation xenon-enhanced computed tomography (XeCT) to provide clinically practical, high-resolution pulmonary ventilation imaging to clinics with access to only a single-energy computed tomography scanner, and to reduce the subject's overall exposure to xenon by utilizing a higher (70%) concentration for a much shorter time than has been employed in prior studies. MATERIALS AND METHODS: We conducted an institutional review board-approved prospective feasibility study of XeCT for 15 patients undergoing thoracic radiotherapy. For XeCT, we acquired two breath-hold single-energy computed tomography images of the entire lung with a single inhalation each of 100% oxygen and a mixture of 70% xenon and 30% oxygen, respectively. A video biofeedback system for coached patient breathing was used to achieve reproducible breath holds. We assessed the technical success of XeCT acquisition and side effects. We then used deformable image registration to align the breath-hold images with each other to accurately subtract them, producing a map of lung xenon distribution. Additionally, we acquired ventilation single-photon emission computed tomography-computed tomography (V-SPECT-CT) images for 11 of the 15 patients. For a comparative analysis, we partitioned each lung into 12 sectors, calculated the xenon concentration from the Hounsfield unit enhancement in each sector, and then correlated this with the corresponding V-SPECT-CT counts. RESULTS: XeCT scans were tolerated well overall, with a mild (grade 1) dizziness as the only side effect in 5 of the 15 patients. Technical failures in five patients occurred because of inaccurate breathing synchronization with xenon gas delivery, leaving seven patients analyzable for XeCT and single-photon emission computed tomography correlation. Sector-wise correlations were strong (Spearman coefficient >0.75, Pearson coefficient >0.65, P value <.002) for two patients for whom ventilation deficits were visibly pronounced in both scans. Correlations were nonsignificant for the remaining five who had more homogeneous XeCT ventilation maps, as well as strong V-SPECT-CT imaging artifacts attributable to airway deposition of the aerosolized imaging agent. Qualitatively, XeCT demonstrated higher resolution and no central airway deposition artifacts compared to V-SPECT-CT. CONCLUSIONS: In this pilot study, single-breath XeCT ventilation imaging was generally feasible for patients undergoing thoracic radiotherapy, using an imaging protocol that is clinically practical and potentially widely available. In the future, the xenon delivery failures can be addressed by straightforward technical improvements to the patient biofeedback coaching system.