Vapor Phase Ammonia Curing to Improve the Mechanical Properties of Antireflection Optical Coatings Designed for Power Laser Optics.

Projects of inertial confinement fusion using lasers need numerous optical components whose coatings allow the increase in their transmission and their resistance to high laser fluence. A coating process based on the self-assembly of sol-gel silica nanoparticles and a post-treatment with ammonia vapor over the surfaces of the optical components ("ammonia curing process") was developed and successfully optimized for industrial production. Manufacturing such antireflective coatings has clear advantages: (i) it is much cheaper than conventional top-down processes; (ii) it is well adapted to large-sized optical components and large-scale production; and (iii) it gives low optical losses in transmission and high resistances to laser fluence. The post-treatment was achieved by a simple exposition of optical components to room-temperature ammonia vapors. The resulting curing process induced strong optical and mechanical changes at the interface and was revealed to be of paramount importance since it reinforced the adhesion and abrasion resistance of the components so that the optical components could be handled easily. Here, we discuss how such coatings were characterized and how the initial thin nanoparticle film was transformed from a brittle film to a resistant coating from the ammonia curing process.

Absorption measurements of transparent materials for a visible power laser: publisher's note.

This publisher's note contains corrections to Opt. Lett.45, 519 (2020) OPLEDP0146-959210.1364/OL.45.000519.

Surface acoustic wave characterization of optical sol-gel thin layers.

Controlling the thin film deposition and mechanical properties of materials is a major challenge in several fields of application. We are more particularly interested in the characterization of optical thin layers produced using sol-gel processes to reduce laser-induced damage. The mechanical properties of these coatings must be known to control and maintain optimal performance under various solicitations during their lifetime. It is therefore necessary to have means of characterization adapted to the scale and nature of the deposited materials. In this context, the dispersion of ultrasonic surface waves induced by a micrometric layer was studied on an amorphous substrate (fused silica) coated with a layer of ormosil using a sol-gel process. Our ormosil material is a silica-PDMS mixture with a variable polydimethylsiloxane (PDMS) content. The design and implementation of Surface Acoustic Wave InterDigital Transducers (SAW-IDT) have enabled quasi-monochromatic Rayleigh-type SAW to be generated and the dispersion phenomenon to be studied over a wide frequency range. Young's modulus and Poisson's ratio of coatings were estimated using an inverse method.

Evaluation of enhanced mirror for LMJ reflector industrial production.

The possibility of enhanced mirrors for laser megajoule reflectors has been studied, and preliminary samples have been realized with magnetron sputtering technology. Spectral measurements of improved reflectivity and cosmetics analysis are presented.

Elasticity of an assembly of disordered nanoparticles interacting via either van der Waals-bonded or covalent-bonded coating layers.

Tailoring physical and chemical properties at the nanoscale by assembling nanoparticles currently paves the way for new functional materials. Obtaining the desired macroscopic properties is usually determined by a perfect control of the contact between nanoparticles. Therefore, the physics and chemistry of nanocontacts are one of the central issues for the design of the nanocomposites. Since the birth of atomic force microscopy, crucial advances have been achieved in the quantitative evaluation of van der Waals and Casimir forces in nanostructures and of adhesion between the nanoparticles. We present here an investigation, by a noncontact method, of the elasticity of an assembly of nanoparticles interacting via either van der Waals-bonded or covalent-bonded coating layers. We demonstrate indeed that the ultrafast opto-acoustic technique, based on the generation and detection of hypersound by femtosecond laser pulses, is very sensitive to probe the properties of the nanocontacts. In particular, we observe and evaluate how much the subnanometric molecules present at nanocontacts influence the coherent acoustic phonon propagation along the network of the interconnected silica nanoparticles. Finally, we show that this ultrafast opto-acoustic technique provides quantitative estimates of the rigidity/stiffness of the nanocontacts.

Is it possible to check microcomponent coatings?

Optical microcomponents are increasingly used in laser optical systems because of their many and novel industrial applications. These components are coated in order to enhance their optical performance, but optical characterizations are very difficult due to the shapes and small size. Thus, to perform this kind of measurement, special devices are needed. It is difficult to check component optical responses after manufacturing. Thus a new method, developed by the French Atomic Energy and Alternative Energies Commission, is proposed to fill this gap.

Estimation of phase shifts linked only to the coating for a dielectric mirror.

The wavefront is an important characteristic for a dielectric mirror. Its measurement is usually performed with interferometers. We introduce a new method to evaluate only the coating wavefront distortion due to nonuniform thickness errors by using a reflectometer. This method uses some reflectance or transmittance maps at a wavenumber σ(m) for which the reflectance or transmittance factor variation is high. These variations are translated into some central wavenumber σ(c) variations, which enables the determination of a phase map from experimental treatment.

High-accuracy measurements of the normal specular reflectance.

The French Laser Megajoule (LMJ) is designed and constructed by the French Commissariat à l'Energie Atomique (CEA). Its amplifying section needs highly reflective multilayer mirrors for the flash lamps. To monitor and improve the coating process, the reflectors have to be characterized to high accuracy. The described spectrophotometer is designed to measure normal specular reflectance with high repeatability by using a small spot size of 100 mum. Results are compared with ellipsometric measurements. The instrument can also perform spatial characterization to detect coating nonuniformity.

Apparatus designed for very accurate measurement of the optical reflection.

The described instrument is a new reflectometer designed to check the normal specular reflectance of 40,000 reflectors necessary for the Laser Megajoule (LMJ). This new reflectometer has a high accuracy over the 400-950 nm wavelength range and allows the delicate measurement of shaped parts. The measurements are relative and several reference mirrors, which are low loss dielectric mirrors [R(lambda)>99.9%], are used for the standardization. The apparatus gives an excellent repeatability (< 0.06% at 2sigma) thanks to its design and automatic focalization imaging system. After a brief review that is related to performance evolution of the spectrophotometers, our facility and its components are described. The methodology of focusing and calibration are explained. The capabilities of our device are illustrated through some measurements realized on flat or shaped samples.

SOCRATE: an optical bench dedicated to the understanding and improvement of a laser conditioning process.

We present an automatic excimer laser bench (SOCRATE) allowing for the treatment of optical components by laser conditioning. This apparatus, developed at the Commissariat a l'Energie Atomique-Le Ripault, has been designed to add to this conditioning process an in situ, accurate laser-induced damage threshold (LIDT) measurement and different nondestructive optical techniques for the characterization of the component during treatment. Through different examples, we demonstrate the importance of these characterizations to improve the understanding of the laser conditioning. The role of an in situ adapted metrology associated in real time with a laser conditioning bench offers new opportunities to analyze laser-induced damage mechanisms and subsequently to increase the LIDT of optical components.

Demonstration of paper cutting using single emitter laser diode and infrared-absorbing ink.

We show that conventional paper can be cut using a 1W laser diode, provided the cutting lines are first traced using a proper ink. The ink should absorb the laser light, and penetrate deep into the paper. An "invisible ink" that is transparent in the visible range and absorbing in the infrared has been successfully tested. The paper is tidily cut. The laser power required to cut the paper is proportional to the displacement speed of the paper. Cutting speeds exceeding 3 cm.s-1.W-1 have been demonstrated. At higher speeds, the paper is not cut through, but easy-tearable lines and easy-folding lines are obtained. The whole inking and laser cutting process may be integrated into next generations of personal inkjet printers and expand document creation abilities.