Two methods of random seed generation to avoid over-segmentation with stochastic watershed: application to nuclear fuel micrographs.

A stochastic version of the watershed algorithm is obtained by choosing randomly in the image the seeds from which the watershed regions are grown. The output of the procedure is a probability density function corresponding to the probability that each pixel belongs to a boundary. In the present paper, two stochastic seed-generation processes are explored to avoid over-segmentation. The first is a non-uniform Poisson process, the density of which is optimized on the basis of opening granulometry. The second process positions the seeds randomly within disks centred on the maxima of a distance map. The two methods are applied to characterize the grain structure of nuclear fuel pellets. Estimators are proposed for the total edge length and grain number per unit area, L(A) and N(A), which take advantage of the probabilistic nature of the probability density function and do not require segmentation.

Non-destructive characterization of deer (Cervus Elaphus) antlers by X-ray microtomography coupled with image analysis.

X-ray microtomography coupled with image analysis was tested as a non-destructive alternative method for the textural characterization of the trabecular part of deer antlers (Cervus Elaphus). As gas adsorption and mercury intrusion cannot be applied on this soft and spongy material, its pore texture was, up to now, determined from histological sections that give only two-dimensional information. In this work, X-ray microtomography is used to scan entire or half pieces of antlers and three-dimensional image analysis is performed in order to assess the differences between samples collected at various antler locations. Results clearly show a porosity profile along the sample diameter. The pore size distribution is showed to be dependent on the sample original site.

Image analysis of X-ray microtomograms of soft materials during convective drying: 3D measurements.

Drying dewatered sludge leads to a complex three-dimensional porous structure. Moreover, this operation is dependent on the way the material is processed. In this study, textural changes of sludge extrudates submitted to convective drying are followed by a 3D image analysis of reconstructed X-ray microtomograms. To achieve this goal, two different wastewater sludges collected in wastewater treatment plant after the thickening step and dewatered in the laboratory are used. It is showed that the evolution of the 3D-crack ratio vs. the residual water content evolves following a hyperbolic law. The 3D opening crack size distribution reveals two different types of pore development, i.e. a continuous pore size evolution for one sludge and the sudden appearance of cracks for the other sludge.

Study of the connectivity properties of Bioglass -filled polylactide foam scaffolds by image analysis and impedance spectroscopy.

The porous structure of two series of poly(D,L-lactide)/Bioglass composite foams prepared by thermal-induced phase separation was investigated by image analysis and impedance spectroscopy. Polymer solutions of either low or high molecular weight containing different concentrations (up to 50 wt.%) of Bioglass particles of mean particle size d < 5 microm were studied. The morphology of both macro- and micropores was studied by scanning electron microscopy and image analysis of both neat and composite foams (containing 10-50 wt.% Bioglass). The pore connectivity of both neat polymer and composite foams was characterized by impedance spectroscopy in relation with their transport properties. The influence of the foam composition (i.e., polymer molecular weight and concentration of Bioglass on pore microstructure was studied using these non-destructive methods. It was found that addition of Bioglass particles has a pronounced effect on pore orientation, leading to increasing loss of order of pore structure, especially for low-molecular weight PDLLA foams.

Elaboration of new formulations to remove micropollutants in MSWI flue gas.

This study consists in identifying and testing potential inorganic substitutes to carbon based materials commonly used as adsorbents for the removal of organic pollutants such as dioxins and furans released from Municipal Solid Waste Incinerators (MSWI). Although carbon materials enable to reach the current regulation in terms of dioxins and furans emissions, they exhibit a potential auto ignition risk when present in hot flue gases. Here, the adsorption potential of carbon based products is compared to the one of some inorganic materials. Chlorobenzene was chosen as a reference molecule to compare the removal performance of the different adsorbents. This comparison was based on the determination of the adsorption energies derived from temperature programmed desorption (TPD) experiments. In the first part of this study, five inorganic materials were selected according to their chlorobenzene adsorption performance compared to those of carbon based products currently used to remove micropollutants from MSWI flue gases. In the second part of the study, the influence of the inlet concentration of adsorbate on the adsorption potential of sorbents is investigated. Actually, the organic compound concentration was decreased in order to be closer to those met in MSWI. Furthermore, the adsorption experiments were performed with other adsorbates whose molecular mass or chlorine content are higher. Thanks to these adsorption results a new organic free formulation has been proposed for the removal of micropollutants. Tests carried out on an industrial scale, demonstrated that this product enables to reach the current norm concerning dioxins and furans emissions.

Alignment of glial cells stimulates directional neurite growth of CNS neurons in vitro.

Olfactory ensheathing cells (OECs) together with olfactory nerve fibroblasts (ONFs) and neonatal astrocytes are potent stimulators of neurite growth in adulthood and during development, respectively. Since it is known that alignment of glial cells is important for the correct outgrowth of axon tracts, it was hypothesized that the alignment of glial cells stimulates directional and enhanced neurite outgrowth. Adult OEC/ONF and neonatal astrocytes were cultured either on biodegradable poly(d,l)-lactide matrices or in Petri dishes for 4 days. Thereafter neonatal cerebral cortical neurons were added. After a 2-days coculture period the cultures were fixed and processed for a combined MAP-2 and phosphorylated neurofilament (RT97) staining. The neurite growth (neurite elongation and neurite formation) and the neurite direction were assessed. We show that (1). OEC/ONF cultures are more potent in stimulating the length of the longest neurite of cocultured neurons, (2). alignment of glial is achieved in vitro on our biomatrices, (3). aligned glial/biomatrix complexes do not enhance neurite growth, and (4). aligned glial/biomatrix complexes direct neurite outgrowth. These data have significant implications for in vivo experiments focusing on glial transplantation. Transplanting glial/biomatrix complexes may stimulate the directional regrowth of severed axons across a lesion site.

Image analysis of X-ray microtomograms of soft materials during convective drying.

X-ray microtomography is used to explore the textural evolution that soft materials undergo during a drying treatment. An original image processing algorithm is applied to vertical projections and reconstructed cross-section images in order to quantify the texture at different stages of drying. Measurements are performed both on grey-level and on binary images. It is shown that X-ray microtomography is a very promising tool in the field of drying investigations. It can be used to determine internal moisture profiles, and to follow crack development and shrinkage in an accurate and non-destructive way. This information is crucial to validate drying models. Waste-water sludges are used as test materials to assess the validity of the proposed methodology. The management of these sludges, often including a drying stage, will become a challenge in the forthcoming years in accordance with environmental regulations. Samples collected in two waste-water treatment plants are investigated. Their analysis by X-ray microtomography brings to the fore two different drying behaviours, illustrating that sludge drying is a complex unit operation very sensitive to the way the material is produced.

Preparation of macroporous biodegradable poly(L-lactide-co-epsilon-caprolactone) foams and characterization by mercury intrusion porosimetry, image analysis, and impedance spectroscopy.

Two poly(L-lactide-co-epsilon-caprolactone) random copolymers containing 5 and 40 mol % of epsilon-CL, namely P(LA-co-CL(5)) and P(LA-co-CL(40)), respectively, have been made macroporous by freeze-drying solutions in dimethylcarbonate. Most of the freeze-dried foams, prepared by varying polymer concentration and cooling rate, exhibited two main pore populations: (1). longitudinally oriented tube-like macropores with diameters >or=100 microm, and (2). interconnected micropores (10-100 microm). Pore characteristics, including macropore density, mean diameter, and interdistance, as well as micropore density, area, and shape, were determined by image analysis of scanning electron micrographs in order to study the influence of processing and formulation parameters on foam structure and properties. The pore orientation and the 3-D texture also were studied by image analysis and impedance spectroscopy. In the case of the P(LA-co-CL(5)), the macropore diameter increased with the cooling rate while the micropore diameter decreased. The micropores also became more circular when the cooling rate was increased. The pore size and morphology of the P(LA-co-CL(40)) were quite unchanged by varying the cooling rate. All the other conditions being the same, the P(LA-co-CL(5)) foams were better organized than the P(LA-co-CL(40)) foams, and pore orientation was improved at the higher cooling rate. Pore size and morphology also can be controlled by changing the polymer concentration (Cp), as we showed by studying P(LA-co-CL(5)) foams prepared by freeze-drying solutions in the 1-10 w/v % Cp range. Macropore density, average diameter, and interdistance of P(LA-co-CL(5)) foams increased with Cp, but the micropore characteristics remained almost unchanged no matter the Cp. The reliability of the characterization methods has been discussed, with special attention to mercury intrusion porosimetry, which is used primarily for measurement of pore volume and pore size distribution. However, this technique is reported here as a destructive and unreliable method for the characterization of fragile P(LA-co-CL(40)) foams. This study shows that image analysis and impedance spectroscopy can give reliable information relative to the pore morphology and anisotropy of freeze-dried foams.

Image analysis of the axonal ingrowth into poly(D,L-lactide) porous scaffolds in relation to the 3-D porous structure.

Porous polymer scaffolds are promising materials for neural tissue engineering because they offer valuable three-dimensional (3-D) supports for the in vitro and in vivo axonal growth and tissue expansion. At the time being, how the in vivo neuronal cell development depends on the scaffold 3-D architecture is unknown. Therefore, scanning electron micrographs of longitudinal sections of porous polylactide scaffolds and immunohistological sections of these scaffolds after implantation and neurofilament staining have been studied by image analysis. Pore orientation and axonal ingrowth have been investigated by spectral analysis on gray level SEM images. Binary image processing has been carried out and the binary images have been studied by spectral analysis in order to estimate the possible effect of the image noise on the real pattern. In addition to axonal orientation, density and length distribution of the regenerated axons into the polymer scaffold have been measured. Dependence of the axonal ingrowth on the 3D-polymer scaffold has been discussed on the basis of the collected data.

Fractal Characterization of Wide Pore Range Catalysts: Application to Pd-Ag/SiO(2) Xerogels.

Fractal analysis has been applied to characterize the structure of Pd-Ag/SiO(2) catalysts dried under vacuum (150 degrees C and 12 hPa) with different concentrations of Pd-Ag. Nitrogen adsorption-desorption, mercury porosimetry, and small-angle X-ray scattering measurements have been used. The different approaches to fractal analysis and their conditions of applicability are briefly described. Results are discussed in relation to those derived previously from classical interpretations. This analysis shows that Pd-Ag/SiO(2) xerogels exhibit a very open self-similar pore structure analogous to the structure of supercritically dried aerogels and that the micropore texture can be tailored by varying the silver content. Copyright 2000 Academic Press.

A gas chromatographic separation for the h and C stable isotope ratio determination of coal compounds.

A new, completely automated gas chromatography technique has been developed to separate the different gaseous compounds produced during underground coal gasification for their (13)C/(12)C and D/H isotope ratio measurements. The technique was designed for separation and collection of H(2), CO, CO(2), H(2)O, H(2)S, CH(4), and heavier hydrocarbons. These gaseous compounds are perfectly separated by the gas-phase chromatograph and quantitatively sent to seven combustion and collection lines. H(2), CO, CH(4), and heavier hydrocarbons are quantitatively oxidized to CO(2) and/or H(2)O. The isotopic analyses are performed by the sealed-tube method. The zinc method is used for reduction of both water and H(2)S to hydrogen for D/H analysis. Including all preparation steps, the reproducibility of isotope abundance values, for a quantity higher than or equal to 0.1 mL of individual components in a mixture (5 mL of gases being initially injected in the gas chromatograph), is ±0.1‰ for δ(13)C(PDB) and ±6‰ for δD(SMOW).