Migration of polycyclic aromatic hydrocarbons from a polymer surrogate through the stratum corneum layer of the skin.

In this study, we determined partition (Ksc/m) and diffusion (Dsc) coefficients of five different polycyclic aromatic hydrocarbons (PAH) migrating from squalane into and through the stratum corneum (s.c.) layer of the skin. Carcinogenic PAH have previously been detected in numerous polymer-based consumer products, especially those dyed with carbon black. Upon dermal contact with these products, PAH may penetrate into and through the viable layers of the skin by passing the s.c. and thus may become bioavailable. Squalane, a frequent ingredient in cosmetics, has also been used as a polymer surrogate matrix in previous studies. Ksc/m and Dsc are relevant parameters for risk assessment because they allow estimating the potential of a substance to become bioavailable upon dermal exposure. We developed an analytical method involving incubation of pigskin with naphthalene, anthracene, pyrene, benzo[a]pyrene and dibenzo[a,h]pyrene in Franz diffusion cell assays under quasi-infinite dose conditions. PAH were subsequently quantified within individual s.c. layers by gas chromatography coupled to tandem mass spectrometry. The resulting PAH depth profiles in the s.c. were fitted to a solution of Fick's second law of diffusion, yielding Ksc/m and Dsc. The decadic logarithm logKsc/m ranged from -0.43 to +0.69 and showed a trend to higher values for PAH with higher molecular masses. Dsc, on the other hand, was similar for the four higher molecular mass PAH but about 4.6-fold lower than for naphthalene. Moreover, our data suggests that the s.c./viable epidermis boundary layer represents the most relevant barrier for the skin penetration of higher molecular mass PAH. Finally, we empirically derived a mathematical description of the concentration depth profiles that better fits our data. We correlated the resulting parameters to substance specific constants such as the logarithmic octanol-water partition coefficient logP, Ksc/m and the removal rate at the s.c./viable epidermis boundary layer.

Application of systematic evidence mapping to identify available data on the potential human health hazards of selected market-relevant azo dyes.

BACKGROUND: Azo dyes are used in textiles and leather clothing. Human exposure can occur from wearing textiles containing azo dyes. Since the body's enzymes and microbiome can cleave azo dyes, potentially resulting in mutagenic or carcinogenic metabolites, there is also an indirect health concern on the parent compounds. While several hazardous azo dyes are banned, many more are still in use that have not been evaluated systematically for potential health concerns. This systematic evidence map (SEM) aims to compile and categorize the available toxicological evidence on the potential human health risks of a set of 30 market-relevant azo dyes. METHODS: Peer-reviewed and gray literature was searched and over 20,000 studies were identified. These were filtered using Sciome Workbench for Interactive computer-Facilitated Text-mining (SWIFT) Review software with evidence stream tags (human, animal, in vitro) yielding 12,800 unique records. SWIFT Active (a machine-learning software) further facilitated title/abstract screening. DistillerSR software was used for additional title/abstract, full-text screening, and data extraction. RESULTS: 187 studies were identified that met populations, exposures, comparators, and outcomes (PECO) criteria. From this pool, 54 human, 78 animal, and 61 genotoxicity studies were extracted into a literature inventory. Toxicological evidence was abundant for three azo dyes (also used as food additives) and sparse for five of the remaining 27 compounds. Complementary search in ECHA's REACH database for summaries of unpublished study reports revealed evidence for all 30 dyes. The question arose of how this information can be fed into an SEM process. Proper identification of prioritized dyes from various databases (including U.S. EPA's CompTox Chemicals Dashboard) turned out to be a challenge. Evidence compiled by this SEM project can be evaluated for subsequent use in problem formulation efforts to inform potential regulatory needs and prepare for a more efficient and targeted evaluation in the future for human health assessments.

Data on ADME parameters of bisphenol A and its metabolites for use in physiologically based pharmacokinetic modelling.

The paper presents the collection of physicochemical parameters of bisphenol A (BPA) and its sulfate (BPAS) and glucuronide (BPAG) conjugates, accompanied by data characterizing their absorption, distribution, metabolism and excretion (ADME) behavior following oral administration of BPA. The data were collected from open literature sources and publicly available databases. Additionally, data calculated by using the MarvinSketch 18.30.0 software or predicted by relevant QSAR models built in Simcyp® Simulator were also used. All data were analysed and are fit for purpose if necessary to ensure a reliable prediction of pharmacokinetics of BPA and its conjugates. The data selection process and reasoning for fitting is provided to allow critical assessment and to ensure data transparency. Finally, the sensitivity analysis was performed to assess the influence of the selected parameters on the PBPK model predictions.

Physiologically based modelling of dermal absorption and kinetics of consumer-relevant chemicals: A case study with exposure to bisphenol A from thermal paper.

Bisphenol A (BPA) is one of the best studied industrial chemicals in terms of exposure, toxicity, and toxicokinetics. This renders it an ideal candidate to exploit the recent advancements in physiologically based pharmacokinetic (PBPK) modelling to support risk assessment of BPA specifically, and of other consumer-relevant hazardous chemicals in general. Using the exposure from thermal paper as a case scenario, this study employed the multi-phase multi-layer mechanistic dermal absorption (MPML MechDermA) model available in the Simcyp® Simulator to simulate the dermal toxicokinetics of BPA at local and systemic levels. Sensitivity analysis helped to identify physicochemical and physiological factors influencing the systemic exposure to BPA. The iterative modelling process was as follows: (i) development of compound files for BPA and its conjugates, (ii) setting-up of a PBPK model for intravenous administration, (iii) extension for oral administration, and (iv) extension for exposure via skin (i.e., hand) contact. A toxicokinetic study involving hand contact to BPA-containing paper was used for model refinement. Cumulative urinary excretion of total BPA had to be employed for dose reconstruction. PBPK model performance was verified using the observed serum BPA concentrations. The predicted distribution across the skin compartments revealed a depot of BPA in the stratum corneum (SC). These findings shed light on the role of the SC to act as temporary reservoir for lipophilic chemicals prior to systemic absorption, which inter alia is relevant for the interpretation of human biomonitoring data and for establishing the relationship between external and internal measures of exposure.

Validation of the hen's egg test for micronucleus induction (HET-MN): detailed protocol including scoring atlas, historical control data and statistical analysis.

A validation exercise of the hen's egg test for micronucleus induction was finalised with a very good predictivity based on the analysis of micronuclei in peripheral erythrocytes of fertilised chicken eggs (Reisinger et al. The hen's egg test for micronucleus-induction (HET-MN): validation data set. Mutagenesis, this issue). For transparency reasons this complementary publication provides further details on the assay especially as it was the first validation study in the field of genotoxicity testing involving the use of chicken eggs. Thus, the experimental protocol is described in detail and is complemented by a scoring atlas for microscopic analysis in blood cells. In addition, general characteristics of the test system, which is able to mirror the systemic availability of test compounds, are delineated: the test compound passes the egg membrane and is taken up by the blood vessels of the underlying chorioallantoic membrane. Subsequently, it is distributed by the circulating blood, metabolised by the developing liver and the yolk sac membrane and finally excreted into the allantois, a bladder equivalent. In specific, the suitability of the test system for genotoxicity testing is shown by, inter alia, a low background DNA damage in a comprehensive historical control database. In addition, the state-of-the-art statistical method used to evaluate obtained data is delineated. It combines laboratory-specific effect threshold with the Umbrella-Williams test, a statistical model also of interest for other genotoxicity test methods.

The hen's egg test for micronucleus induction (HET-MN): validation data set.

The classical in vitro genotoxicity test battery is known to be sensitive for indicating genotoxicity. However, a high rate of 'misleading positives' was reported when three assays were combined as required by several legislations. Despite the recent optimisations of the standard in vitro tests, two gaps could hardly be addressed with assays based on 2D monolayer cell cultures: the route of exposure and a relevant intrinsic metabolic capacity to transform pro-mutagens into reactive metabolites. Following these considerations, fertilised chicken eggs have been introduced into genotoxicity testing and were combined with a classical read-out parameter, the micronucleus frequency in circulating erythrocytes, to develop the hen's egg test for micronucleus induction (HET-MN). As a major advantage, the test mirrors the systemic availability of compounds after oral exposure by reflecting certain steps of Absorption, Distribution, Metabolism, Excretion (ADME) without being considered as an animal experiment. The assay is supposed to add to a toolbox of assays to follow up on positive findings from initial testing with classical in vitro assays. We here report on a validation exercise, in which >30 chemicals were tested double-blinded in three laboratories. The specificity and sensitivity of the HET-MN were calculated to be 98 and 84%, respectively, corresponding to an overall accuracy of 91%. A detailed protocol, which includes a picture atlas detailing the cell and micronuclei analysis, is published in parallel (Maul et al. Validation of the hen's egg test for micronucleus induction (HET-MN): detailed protocol including scoring atlas, historical control data and statistical analysis).

Validation of the 3D reconstructed human skin Comet assay, an animal-free alternative for following-up positive results from standard in vitro genotoxicity assays.

As part of the safety assessment process, all industrial sectors employ genotoxicity test batteries, starting with well-established in vitro assays. However, these batteries have limited predictive capacity for the in vivo situation, which may result in unnecessary follow-up in vivo testing or the loss of promising substances where animal tests are prohibited or not desired. To address this, a project involving regulators, academia and industry was established to develop and validate in vitro human skin-based genotoxicity assays for topically exposed substances, such as cosmetics ingredients. Here, we describe the validation of the 3D reconstructed skin (RS) Comet assay. In this multicenter study, chemicals were applied topically three times to the skin over 48 h. Isolated keratinocytes and fibroblasts were transferred to slides before electrophoresis and the resulting comet formation was recorded as % tail DNA. Before decoding, results of the validation exercise for 32 substances were evaluated by an independent statistician. There was a high predictive capacity of this assay when compared to in vivo outcomes, with a sensitivity of 77 (80)%, a specificity of 88 (97)% and an overall accuracy of 83 (92)%. The numbers reflect the calls of the performing laboratories in the coded phase, whereas those in parenthesis reflect calls according to the agreed evaluation criteria. Intra- and inter-laboratory reproducibility was also very good, with a concordance of 93 and 88%, respectively. These results generated with the Phenion® Full-Thickness skin model demonstrate its suitability for this assay, with reproducibly low background DNA damage and sufficient metabolic capacity to activate pro-mutagens. The validation outcome supports the use of the RS Comet assay to follow up positive results from standard in vitro genotoxicity assays when the expected route of exposure is dermal. Based on the available data, the assay was accepted recently into the OECD test guideline development program.

Pharmacokinetics of bisphenol A in humans following dermal administration.

BACKGROUND: Human exposures to bisphenol A (BPA) are widespread. The current study addresses uncertainties regarding human pharmacokinetics of BPA following dermal exposure. OBJECTIVE: To examine the absorption, distribution, metabolism and excretion of BPA in humans following dermal administration. METHODS: We dermally administered deuterated BPA (d6-BPA) to 10 subjects (6 men and 4 women) at a dose of 100 µg/kg over a 12-hour period and conducted blood and urine analysis from the beginning of dosing through a three- or six-day period. We present time-course serum and urine concentrations of total and unconjugated ("free") d6-BPA and used this information to calculate terminal half-life and area under the curve. RESULTS AND CONCLUSIONS: Detectable serum levels of total d6-BPA were observed at 1.4 h after the start of dosing, and a maximum serum concentration (Cmax) of 3.26 nM was observed. Free d6-BPA was detectable in serum 2.8 h after start of dermal administration, with Cmax of 0.272 nM. Beginning at approximately seven hours and continuing to 12 h (which corresponds to cessation of exposure), the concentration of free and total serum d6-BPA plateaued. The terminal half-lives of total d6-BPA and free d6-BPA in the body were 21.4 ± 9.81 h and 17.6 ± 7.69 h, respectively. Elimination from the body was rate-limited by kinetics in the dermal compartment. Free d6-BPA was a greater percentage of the area under the curve of total serum BPA (8.81%) compared to the 0.56% observed in our previously published oral study. Recovery of total d6-BPA in urine was <2% of the applied dose after six days. Analysis of the area under the curve for dermal and oral administration revealed that 2.2% of the dermal dose became systemically available. These data are in line with prior studies indicating how pharmacokinetics of BPA differ following oral and dermal exposures. Dermal exposure resulted in a longer apparent half-life and higher free:total d6-BPA ratio compared to oral.

Aggregated aluminium exposure: risk assessment for the general population.

Aluminium is one of the most abundant elements in earth's crust and its manifold uses result in an exposure of the population from many sources. Developmental toxicity, effects on the urinary tract and neurotoxicity are known effects of aluminium and its compounds. Here, we assessed the health risks resulting from total consumer exposure towards aluminium and various aluminium compounds, including contributions from foodstuffs, food additives, food contact materials (FCM), and cosmetic products. For the estimation of aluminium contents in foodstuff, data from the German "Pilot-Total-Diet-Study" were used, which was conducted as part of the European TDS-Exposure project. These were combined with consumption data from the German National Consumption Survey II to yield aluminium exposure via food for adults. It was found that the average weekly aluminium exposure resulting from food intake amounts to approx. 50% of the tolerable weekly intake (TWI) of 1 mg/kg body weight (bw)/week, derived by the European Food Safety Authority (EFSA). For children, data from the French "Infant Total Diet Study" and the "Second French Total Diet Study" were used to estimate aluminium exposure via food. As a result, the TWI can be exhausted or slightly exceeded-particularly for infants who are not exclusively breastfed and young children relying on specially adapted diets (e.g. soy-based, lactose free, hypoallergenic). When taking into account the overall aluminium exposure from foods, cosmetic products (cosmetics), pharmaceuticals and FCM from uncoated aluminium, a significant exceedance of the EFSA-derived TWI and even the PTWI of 2 mg/kg bw/week, derived by the Joint FAO/WHO Expert Committee on Food Additives, may occur. Specifically, high exposure levels were found for adolescents aged 11-14 years. Although exposure data were collected with special regard to the German population, it is also representative for European and comparable to international consumers. From a toxicological point of view, regular exceedance of the lifetime tolerable aluminium intake (TWI/PTWI) is undesirable, since this results in an increased risk for health impairments. Consequently, recommendations on how to reduce overall aluminium exposure are given.

Mineral oil in food, cosmetic products, and in products regulated by other legislations.

For a few years, mineral oils and their potential adverse health effects have been a constant issue of concern in many regulatory areas such as food, cosmetics, other consumer products, and industrial chemicals. Analytically, two fractions can be distinguished: mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH). This paper aims at assessing the bioaccumulative potential and associated histopathological effects of MOSH as well as the carcinogenic potential of MOAH for consumer-relevant mineral oils. It also covers the absorption, distribution, metabolism, and excretion of MOSH and MOAH upon oral and dermal exposures. The use and occurrence of consumer-relevant, highly refined mineral oils in food, cosmetics and medicinal products are summarized, and estimates for the exposure of consumers are provided. Also addressed are the challenges in characterizing the substance identity of mineral oil products under REACH. Evidence from more recent autopsy and biopsy studies, along with information on decreasing food contamination levels, indicates a low risk for adverse hepatic lesions that may arise from the retention of MOSH in the liver. With respect to MOAH, at present there is no indication of any carcinogenic effects in animals dermally or orally exposed to highly refined mineral oils and waxes. Such products are used not only in cosmetics but also in medicinal products and as additives in food contact materials. The safety of these mineral oil-containing products is thus indirectly documented by their prevalent and long-term use, with a simultaneous lack of clinical and epidemiological evidence for adverse health effects.

Validation of the 3D Skin Comet assay using full thickness skin models: Transferability and reproducibility.

Recently revised OECD Testing Guidelines highlight the importance of considering the first site-of-contact when investigating the genotoxic hazard. Thus far, only in vivo approaches are available to address the dermal route of exposure. The 3D Skin Comet and Reconstructed Skin Micronucleus (RSMN) assays intend to close this gap in the in vitro genotoxicity toolbox by investigating DNA damage after topical application. This represents the most relevant route of exposure for a variety of compounds found in household products, cosmetics, and industrial chemicals. The comet assay methodology is able to detect both chromosomal damage and DNA lesions that may give rise to gene mutations, thereby complementing the RSMN which detects only chromosomal damage. Here, the comet assay was adapted to two reconstructed full thickness human skin models: the EpiDerm™- and Phenion® Full-Thickness Skin Models. First, tissue-specific protocols for the isolation of single cells and the general comet assay were transferred to European and US-American laboratories. After establishment of the assay, the protocol was then further optimized with appropriate cytotoxicity measurements and the use of aphidicolin, a DNA repair inhibitor, to improve the assay's sensitivity. In the first phase of an ongoing validation study eight chemicals were tested in three laboratories each using the Phenion® Full-Thickness Skin Model, informing several validation modules. Ultimately, the 3D Skin Comet assay demonstrated a high predictive capacity and good intra- and inter-laboratory reproducibility with four laboratories reaching a 100% predictivity and the fifth yielding 70%. The data are intended to demonstrate the use of the 3D Skin Comet assay as a new in vitro tool for following up on positive findings from the standard in vitro genotoxicity test battery for dermally applied chemicals, ultimately helping to drive the regulatory acceptance of the assay. To expand the database, the validation will continue by testing an additional 22 chemicals.

Characterization of chemical-induced sterile inflammation in vitro: application of the model compound ketoconazole in a human hepatic co-culture system.

Liver injury as a result of a sterile inflammation is closely linked to the activation of immune cells, including macrophages, by damaged hepatocytes. This interaction between immune cells and hepatocytes is as yet not considered in any of the in vitro test systems applied during the generation of new drugs. Here, we established and characterized a novel in vitro co-culture model with two human cell lines, HepG2 and differentiated THP-1. Ketoconazole, an antifungal drug known for its hepatotoxicity, was used as a model compound in the testing of the co-culture. Single cultures of HepG2 and THP-1 cells were studied as controls. Different metabolism patterns of ketoconazole were observed for the single and co-culture incubations as well as for the different cell types. The main metabolite N-deacetyl ketoconazole was found in cell pellets, but not in supernatants of cell cultures. Global proteome analysis showed that the NRF2-mediated stress response and the CXCL8 (IL-8) pathway were induced by ketoconazole treatment under co-culture conditions. The upregulation and ketoconazole-induced secretion of several pro-inflammatory cytokines, including CXCL8, TNF-α and CCL3, was observed in the co-culture system only, but not in single cell cultures. Taking together, we provide evidence that the co-culture model applied might be suitable to serve as tool for the prediction of chemical-induced sterile inflammation in liver tissue in vivo.

Regulatory toxicology in the twenty-first century: challenges, perspectives and possible solutions.

The advent of new testing systems and "omics"-technologies has left regulatory toxicology facing one of the biggest challenges for decades. That is the question whether and how these methods can be used for regulatory purposes. The new methods undoubtedly enable regulators to address important open questions of toxicology such as species-specific toxicity, mixture toxicity, low-dose effects, endocrine effects or nanotoxicology, while promising faster and more efficient toxicity testing with the use of less animals. Consequently, the respective assays, methods and testing strategies are subject of several research programs worldwide. On the other hand, the practical application of such tests for regulatory purposes is a matter of ongoing debate. This document summarizes key aspects of this debate in the light of the European "regulatory status quo", while elucidating new perspectives for regulatory toxicity testing.

The DNT-EST: a predictive embryonic stem cell-based assay for developmental neurotoxicity testing in vitro.

As the developing brain is exquisitely vulnerable to chemical disturbances, testing for developmental neurotoxicity of a substance is an important aspect of characterizing its tissue specific toxicity. Mouse embryonic stem cells (mESCs) can be differentiated toward a neural phenotype, and this can be used as a model for early brain development. We developed a new in vitro assay using mESCs to predict adverse effects of chemicals and other compounds on neural development - the so-called DNT-EST. After treatment of differentiating stem cells for 48h or 72h, at two key developmental stages endpoint for neural differentiation, viability, and proliferation were assessed. As a reference, we similarly treated undifferentiated stem cells 2 days after plating for 48h or 72h in parallel to the differentiating stem cells. Here, we show that chemical testing of a training set comprising nine substances (six substances of known developmental toxicity and three without specific developmental neurotoxicity) enabled a mathematical prediction model to be formulated that provided 100% predictivity and accuracy for the given substances, including in leave-one-out cross-validation. The described test method can be performed within two weeks, including data analysis, and provides a prediction of the developmental neurotoxicity potency of a substance.

Statistical analysis of the hen's egg test for micronucleus induction (HET-MN assay).

The HET-MN assay (hen's egg test for micronucleus induction) is different from other in vitro genotoxicity assays in that it includes toxicologically important features such as absorption, distribution, metabolic activation, and excretion of the test compound. As a promising follow-up to complement existing in vitro test batteries for genotoxicity, the HET-MN is currently undergoing a formal validation. To optimize the validation, the present study describes a critical analysis of previously obtained HET-MN data to check the experimental design and to identify the most appropriate statistical procedure to evaluate treatment effects. Six statistical challenges (I-VI) of general relevance were identified, and remedies were provided which can be transferred to similarly designed test methods: a Williams-type trend test is proposed for overdispersed counts (II) by means of a square-root transformation which is robust for small sample sizes (I), variance heterogeneity (III), and possible downturn effects at high doses (IV). Due to near-to-zero or even zero-count data occurring in the negative control (V), a conditional comparison of the treatment groups against the mean of the historical controls (VI) instead of the concurrent control was proposed, which is in accordance with US-FDA recommendations. For the modified Williams-type tests, the power can be estimated depending on the magnitude and shape of the trend, the number of dose groups, and the magnitude of the MN counts in the negative control. The experimental design used previously (i.e. six eggs per dose group, scoring of 1000 cells per egg) was confirmed. The proposed approaches are easily available in the statistical computing environment R, and the corresponding R-codes are provided.

Encoding conditions affect recognition of vocally expressed emotions across cultures.

Although the expression of emotions in humans is considered to be largely universal, cultural effects contribute to both emotion expression and recognition. To disentangle the interplay between these factors, play-acted and authentic (non-instructed) vocal expressions of emotions were used, on the assumption that cultural effects may contribute differentially to the recognition of staged and spontaneous emotions. Speech tokens depicting four emotions (anger, sadness, joy, fear) were obtained from German radio archives and re-enacted by professional actors, and presented to 120 participants from Germany, Romania, and Indonesia. Participants in all three countries were poor at distinguishing between play-acted and spontaneous emotional utterances (58.73% correct on average with only marginal cultural differences). Nevertheless, authenticity influenced emotion recognition: across cultures, anger was recognized more accurately when play-acted (z = 15.06, p < 0.001) and sadness when authentic (z = 6.63, p < 0.001), replicating previous findings from German populations. German subjects revealed a slight advantage in recognizing emotions, indicating a moderate in-group advantage. There was no difference between Romanian and Indonesian subjects in the overall emotion recognition. Differential cultural effects became particularly apparent in terms of differential biases in emotion attribution. While all participants labeled play-acted expressions as anger more frequently than expected, German participants exhibited a further bias toward choosing anger for spontaneous stimuli. In contrast to the German sample, Romanian and Indonesian participants were biased toward choosing sadness. These results support the view that emotion recognition rests on a complex interaction of human universals and cultural specificities. Whether and in which way the observed biases are linked to cultural differences in self-construal remains an issue for further investigation.