Synthesis and Characterization of Statistical and Block Copolymers of n-Hexyl Isocyanate and 3-(Triethoxysilyl) Propyl Isocyanate via Coordination Polymerization.

Well-defined statistical copolymers of n-hexyl isocyanate, HIC, and 3-(triethoxysilyl)propyl isocyanate, TESPI, were synthesized via coordination polymerization mechanism, employing a chiral half-titanocene complex as initiator. The monomer reactivity ratios of the statistical copolymers were calculated using linear graphical methods and the computer program COPOINT in the frame of the terminal model. The molecular and structural characteristics of the copolymers were also calculated. The kinetics of the thermal decomposition of the statistical copolymers was studied by Thermogravimetric Analysis, TGA, and Differential Thermogravimetry, DTG, and the activation energy of this process was calculated employing several theoretical models. In addition, block copolymers constituted from PHIC and PTESPI blocks were synthesized by sequential coordination polymerization. All samples were characterized by nuclear magnetic resonance, NMR, spectroscopy and size exclusion chromatography, SEC. The thermal stability of the blocks was also studied by TGA and DTG and compared to the corresponding statistical copolymers.

Synthesis and Micellization Behavior of Amphiphilic Block Copolymers of Poly(N-vinyl Pyrrolidone) and Poly(Benzyl Methacrylate): Block versus Statistical Copolymers.

Block copolymers of N-vinyl pyrrolidone (NVP) and benzyl methacrylate (BzMA), PNVP-b-PBzMA, were prepared by RAFT polymerization techniques and sequential addition of monomers. The copolymers were characterized by Size Exclusion Chromatography (SEC) and NMR spectroscopy. Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA) and Differential Thermogravimetry (DTG) were employed to study the thermal properties of these copolymers. The micellization behavior in THF, which is a selective solvent for the PBzMA blocks, was examined. For comparison the self-assembly properties of the corresponding statistical copolymers, PNVP-stat-PBzMA, were studied. In addition, the association behavior in aqueous solutions was analyzed for the block copolymers, PNVP-b-PBzMA. In this case, the solvent is selective for the PNVP blocks. Dilute solution viscometry, static (SLS) and dynamic light scattering (DLS) were employed as the tools to investigate the micellar assemblies. The efficient encapsulation of the hydrophobic curcumin within the micellar core of the supramolecular structures in aqueous solutions was demonstrated by UV-Vis spectroscopy and DLS measurements.

Statistical Copolymers of N-Vinylpyrrolidone and 2-Chloroethyl Vinyl Ether via Radical RAFT Polymerization: Monomer Reactivity Ratios, Thermal Properties, and Kinetics of Thermal Decomposition of the Statistical Copolymers.

The radical statistical copolymerization of N-vinyl pyrrolidone (NVP) and 2-chloroethyl vinyl ether (CEVE) was conducted using the Reversible Addition-Fragmentation chain Transfer (RAFT) polymerization technique, employing [(O-ethylxanthyl)methyl]benzene (CTA-1) and O-ethyl S-(phthalimidylmethyl) xanthate (CTA-2) as the Chain Transfer Agents (CTAs), leading to P(NVP-stat-CEVE) products. After optimizing copolymerization conditions, monomer reactivity ratios were estimated using various linear graphical methods, as well as the COPOINT program, which was applied in the framework of the terminal model. Structural parameters of the copolymers were obtained by calculating the dyad sequence fractions and the monomers' mean sequence lengths. Thermal properties of the copolymers were studied by Differential Scanning Calorimetry (DSC) and kinetics of their thermal degradation by Thermogravimetric Analysis (TGA) and Differential Thermogravimetry (DTG), applying the isoconversional methodologies of Ozawa-Flynn-Wall (OFW) and Kissinger-Akahira-Sunose (KAS).

Correction: Bitsi et al. Supramolecular Triblock Copolymers through the Formation of Hydrogen Bonds: Synthesis, Characterization, Association Effects in Solvents of Different Polarity. Polymers 2020, 12, 468.

The authors wish to make the following corrections to the published paper [...].

Recent Advances in the Synthesis of Complex Macromolecular Architectures Based on Poly(N-vinyl pyrrolidone) and the RAFT Polymerization Technique.

Recent advances in the controlled RAFT polymerization of complex macromolecular architectures based on poly(N-vinyl pyrrolidone), PNVP, are summarized in this review article. Special interest is given to the synthesis of statistical copolymers, block copolymers, and star polymers and copolymers, along with graft copolymers and more complex architectures. In all cases, PNVP is produced via RAFT techniques, whereas other polymerization methods can be employed in combination with RAFT to provide the desired final products. The advantages and limitations of the synthetic methodologies are discussed in detail.

Statistical Copolymers of N-Vinylpyrrolidone and Isobornyl Methacrylate via Free Radical and RAFT Polymerization: Monomer Reactivity Ratios, Thermal Properties, and Kinetics of Thermal Decomposition.

The synthesis of statistical copolymers of N-vinylpyrrolidone (NVP) with isobornyl methacrylate (IBMA) was conducted by free radical and reversible addition-fragmentation chain transfer (RAFT) polymerization. The reactivity ratios were estimated using the Finemann-Ross, inverted Fineman-Ross, Kelen-Tüdos, extended Kelen-Tüdos and Barson-Fenn graphical methods, along with the computer program COPOINT, modified to both the terminal and the penultimate models. According to COPOINT the reactivity ratios were found to be equal to 0.292 for NVP and 2.673 for IBMA for conventional radical polymerization, whereas for RAFT polymerization and for the penultimate model the following reactivity ratios were obtained: r11 = 4.466, r22 = 0, r21 = 14.830, and r12 = 0 (1 stands for NVP and 2 for IBMA). In all cases, the NVP reactivity ratio was significantly lower than that of IBMA. Structural parameters of the copolymers were obtained by calculating the dyad sequence fractions and the mean sequence length. The thermal properties of the copolymers were studied by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and differential thermogravimetry (DTG). The results were compared with those of the respective homopolymers.

Micellization Behaviour of Linear and Nonlinear Block Copolymers Based on Poly(n-hexyl isocyanate) in Selective Solvents.

Block copolymers have attracted significant scientific and economic interest over the last decades due to their ability to self-assemble into ordered structures both in bulk and in selective solvents. In this work, the self-assembly behaviour of both linear (diblocks, triblocks and pentablocks) and nonlinear (miktoarm stars and a block-graft) copolymers based on poly(n-hexyl isocyanate), PHIC, were studied in selective solvents such as n-heptane and n-dodecane. A variety of experimental techniques, namely static and dynamic light scattering, dilute solution viscometry and atomic force microscopy, were employed to study the micellar structural parameters (e.g., aggregation number, overall micellar size and shape, and core and shell dimensions). The effect of the macromolecular architecture, the molecular weight and the copolymer composition on the self-assembly behaviour was studied. Spherical micelles in equilibrium with clusters were obtained from the block copolymers. Thermally stable, uniform and spherical aggregates were found from the triblock copolymers. The poly(n-hexyl isocyanate)-b-polyisoprene-b-poly(n-hexyl isocyanate),-HIH copolymers tend to adopt closed loop conformation, leading to more elongated cylindrical-type structures upon increasing the concentration. Clustering effects were also reported in the case of the pentablock terpolymers. The topology of the blocks plays an important role, since the poly(n-hexyl isocyanate)-b-polystyrene-b-polyisoprene-b-polystyrene-b-poly(n-hexyl isocyanate), HSISH terpolymer shows intermicellar fusion of spherical micelles, leading to the formation of extended networks. The formation of spherical micelles in equilibrium with clusters was obvious in the case of the miktoarm stars, whereas the block-graft copolymer shows the existence of mainly unimolecular micelles.

Supramolecular Triblock Copolymers Through the Formation of Hydrogen Bonds: Synthesis, Characterization, Association Effects in Solvents of Different Polarity.

Anionic polymerization techniques were employed for the synthesis of linear polystyrene (PS) and block copolymer of PS and polyisoprene (PI) PS-b-PI bearing end hydroxyl groups. Following suitable organic chemistry transformation, the -OH end groups were converted to moieties able to form complementary hydrogen bonds including 2,6-diaminopurine, Dap, thymine, Thy, and the so-called Hamilton receptor, Ham. The formation of hydrogen bonds was examined between the polymers PS-Dap and PS-b-PI-Thy, along with the polymers PS-Ham and PS-b-PI-Thy. The conditions under which supramolecular triblock copolymers are formed and the possibility to form aggregates were examined both in solution and in the solid state using a variety of techniques such as 1H-NMR spectroscopy, size exclusion chromatography (SEC), dilute solution viscometry, dynamic light scattering (DLS), thermogravimetric analysis (TGA), differential thermogravimetry (DTG), and differential scanning calorimetry (DSC).

Macromolecular Brushes Based on Poly(L-Lactide) and Poly(ε-Caprolactone) Single and Double Macromonomers via ROMP. Synthesis, Characterization and Thermal Properties.

Single and double poly(L-lactide) (PLLA) and poly(ε-caprolactone) (PCL) macromonomers having a norbornenyl polymerizable group were prepared by conventional Ring Opening Polymerization (ROP). These macromonomers were further subjected to ring opening metathesis polymerization (ROMP) reactions in order to produce double polymer brushes consisting of PLLA or PCL side chains on a polynorbornene (PNBE) backbone. Statistical or block ring opening metathesis copolymerization of the PLLA and PCL macromonomers afforded the corresponding random and block double brushes. Sequential ROMP of the single PLLA, PCL and PLLA macromonomers resulted in the synthesis of the corresponding triblock copolymer brush. The molecular characteristics of the macromolecular brushes were obtained by 1H-NMR spectroscopy and Size Exclusion Chromatography. The thermal properties of the samples were studied by thermogravimetric analysis, TGA, Differential Thermogravimetry, DTG and Differential Scanning Calorimetry, DSC.

Statistical Copolymers of n-Butyl Vinyl Ether and 2-Chloroethyl Vinyl Ether via Metallocene-Mediated Cationic Polymerization. A Scaffold for the Synthesis of Graft Copolymers.

The cationic statistical copolymerization of n-butyl (be) and 2-chloroethyl vinyl ether (CEVE), is efficiently conducted using bis(η5-cyclopentadienyl)dimethyl zirconium (Cp2ZrMe2) in combination with tetrakis(pentafluorophenyl)borate dimethylanilinum salt [B(C6F5)4]-[Me2NHPh]+, as an initiation system. The reactivity ratios are calculated using both linear graphical and non-linear methods. Structural parameters of the copolymers are obtained by calculating the dyad sequence fractions and the mean sequence length, which are derived using the monomer reactivity ratios. The glass transition temperatures (Tg) of the copolymers are measured by Differential Scanning Calorimetry (DSC), and the results are compared with predictions based on several theoretical models. The statistical copolymers are further employed as scaffolds for the synthesis of graft copolymers having poly(vinyl ether)s as a backbone and either poly(ε-caprolactone) (PCL) or poly(l-lactide) (PLLA) as side chains. Both the grafting "onto" and the grafting "from" methodologies are employed. The reaction sequence is monitored by Size Exclusion Chromatography (SEC), NMR and IR spectroscopies. The advantages and limitations of each approach are thoroughly examined.

Poly(urethane-norbornene) Aerogels via Ring Opening Metathesis Polymerization of Dendritic Urethane-Norbornene Monomers: Structure-Property Relationships as a Function of an Aliphatic Versus an Aromatic Core and the Number of Peripheral Norbornene Moieties.

We report the synthesis and characterization of synthetic polymer aerogels based on dendritic-type urethane-norbornene monomers. The core of those monomers is based either on an aromatic/rigid (TIPM/Desmodur RE), or an aliphatic/flexible (Desmodur N3300) triisocyanate. The terminal norbornene groups (three at the tip of each of the three branches) were polymerized via ROMP using the inexpensive 1st generation Grubbs catalyst. The polymerization/gelation conditions were optimized by varying the amount of the catalyst. The resulting wet-gels were dried either from pentane under ambient pressure at 50 °C, or from t-butanol via freeze-drying, or by using supercritical fluid (SCF) CO2. Monomers were characterized with high resolution mass spectrometry (HRMS), ¹H- and solid-state 13C-NMR. Aerogels were characterized with ATR-FTIR and solid-state 13C-NMR. The porous network was probed with N2-sorption and SEM. The thermal stability of monomers and aerogels was studied with TGA, which also provides evidence for the number of norbornene groups that reacted via ROMP. At low densities (<0.1 g cm−3) all aerogels were highly porous (porosity > 90%), mostly macroporous materials; aerogels based on the aliphatic/flexible core were fragile, whereas aerogels containing the aromatic/rigid core were plastic, and at even lower densities (0.03 g cm−3) foamy. At higher densities (0.2⁻0.7 g cm−3) all materials were stiff, strong, and hard. At low monomer concentrations all aerogels consisted of discrete primary particles that formed spherical secondary aggregates. At higher monomer concentrations the structure consisted of fused particles with the size of the previous secondary aggregates, due to the low solubility of the developing polymer, which phase-separated and formed a primary particle network. Same-size fused aggregates were observed for both aliphatic and aromatic triisocyanate-derived aerogels, leading to the conclusion that it is not the aliphatic or aromatic core that determines phase separation, but rather the solubility of the polymeric backbone (polynorbornene) that is in both cases the same. The material properties were compared to those of analogous aerogels bearing only one norbornene moiety at the tip of each branch deriving from the same cores.

Exploring the interactions of irbesartan and irbesartan-2-hydroxypropyl-ß-cyclodextrin complex with model membranes.

The interactions of irbesartan (IRB) and irbesartan-2-hydroxypropyl-ß-cyclodextrin (HP-ß-CD) complex with dipalmitoyl phosphatidylcholine (DPPC) bilayers have been explored utilizing an array of biophysical techniques ranging from differential scanning calorimetry (DSC), small angle X-ray scattering (SAXS), ESI mass spectrometry (ESI-MS) and solid state nuclear magnetic resonance (ssNMR). Molecular dynamics (MD) calculations have been also conducted to complement the experimental results. Irbesartan was found to be embedded in the lipid membrane core and to affect the phase transition properties of the DPPC bilayers. SAXS studies revealed that irbesartan alone does not display perfect solvation since some coexisting irbesartan crystallites are present. In its complexed form IRB gets fully solvated in the membranes showing that encapsulation of IRB in HP-ß-CD may have beneficial effects in the ADME properties of this drug. MD experiments revealed the topological and orientational integration of irbesartan into the phospholipid bilayer being placed at about 1nm from the membrane centre.

Copolymerization of Norbornene and Norbornadiene Using a cis-Selective Bimetallic W-Based Catalytic System.

The bimetallic cluster Na[W2(µ-Cl)3Cl4(THF)2]·(THF)3 ({W2}, {W 3 W}6+, a'²e'4), which features a triple metal-metal bond, is a highly efficient room-temperature initiator for ring opening metathesis polymerization (ROMP) of norbornene (NBE) and norbornadiene (NBD), providing high-cis polymers. In this work, {W2} was used for the copolymerization of the aforementioned monomers, yielding statistical poly(norbornene)/poly(norbornadiene) PNBE/PNBD copolymers of high molecular weight and high-cis content. The composition of the polymer chain was estimated by 13C CPMAS NMR data and it was found that the ratio of PNBE/PNBD segments in the polymer chain was relative to the monomer molar ratio in the reaction mixture. The thermal properties of all copolymers were similar, resembled the properties of PNBD homopolymer and indicated a high degree of cross-linking. The morphology of all materials in this study was smooth and non-porous; copolymers with higher PNBE content featured a corrugated morphology. Glass transition temperatures were lower for the copolymers than for the homopolymers, providing a strong indication that those materials featured a branched-shaped structure. This conclusion was further supported by viscosity measurements of copolymers solutions in THF. The molecular structure of those materials can be controlled, potentially leading to well-defined star polymers via the "core-first" synthesis method. Therefore, {W2} is not only a cost-efficient, practical, highly active, and cis-stereoselective ROMP-initiator, but it can also be used for the synthesis of more complex macromolecular structures.

Synthesis, Characterization and Thermal Properties of Poly(ethylene oxide), PEO, Polymacromonomers via Anionic and Ring Opening Metathesis Polymerization.

Branched polymers are a valuable class of polymeric materials. In the present study, anionic polymerization techniques were employed for the synthesis of low molecular weight poly(ethylene oxide) (PEO) macromonomers bearing norbornenyl end groups. The macromonomers were characterized by SEC, MALDI-TOF and NMR spectroscopy. Subsequent ring opening metathesis polymerization (ROMP) of the macromonomers using ruthenium catalysts (Grubbs catalysts of the 1st, 2nd and 3rd generations) afforded the corresponding polymacromonomers. The effects of the macromonomer molecular weight, the type of the catalyst, the nature of the solvent, the monomer concentration and the polymerization temperature on the molecular characteristics of the branched polymers were examined in detail. The crystallization behavior of the macromonomers and the corresponding polymacromonomers were studied by Differential Scanning Calorimetry (DSC). The thermal stability and the kinetics of the thermal decomposition of the samples were also studied by Thermogravimetric Analysis (TGA). The activation energies of the thermal decomposition were analyzed using the Ozawa⁻Flynn⁻Wall and Kissinger methodologies.

Exploring the Reactivity of Na[W2(µ-Cl)3Cl4(THF)2]∙(THF)3 towards the Polymerization of Selected Cycloolefins.

The bimetallic compound Na[W2(µ-Cl)3Cl4(THF)2]·(THF)3 (1, {W (3) W}(6+), a'2e'4) is a highly efficient room-temperature initiator for ring opening metathesis polymerization (ROMP) of norbornene (NBE) and some of its derivatives. In most cases, addition of phenylacetylene (PA) as co-initiator improves the catalytic activity and retains the high cis-stereoselectivity. On the other hand, 1 can polymerize cyclopentadiene (CPD), not via a metathetic, but rather, via a cationic mechanism. Here, we present a comparison of the reactivity of the two catalytic systems (1 and 1/PA) between themselves and with other systems reported in the literature, the characterization of the polymers formed and mechanistic aspects of the corresponding reactions.

Statistical Ring Opening Metathesis Copolymerization of Norbornene and Cyclopentene by Grubbs' 1st-Generation Catalyst.

Statistical copolymers of norbornene (NBE) with cyclopentene (CP) were prepared by ring-opening metathesis polymerization, employing the 1st-generation Grubbs' catalyst, in the presence or absence of triphenylphosphine, PPh3. The reactivity ratios were estimated using the Finemann-Ross, inverted Finemann-Ross, and Kelen-Tüdos graphical methods, along with the computer program COPOINT, which evaluates the parameters of binary copolymerizations from comonomer/copolymer composition data by integrating a given copolymerization equation in its differential form. Structural parameters of the copolymers were obtained by calculating the dyad sequence fractions and the mean sequence length, which were derived using the monomer reactivity ratios. The kinetics of thermal decomposition of the copolymers along with the respective homopolymers was studied by thermogravimetric analysis within the framework of the Ozawa-Flynn-Wall and Kissinger methodologies. Finally, the effect of triphenylphosphine on the kinetics of copolymerization, the reactivity ratios, and the kinetics of thermal decomposition were examined.

Poly(DL-lactide)-b-poly(N,N-dimethylamino-2-ethyl methacrylate): synthesis, characterization, micellization behavior in aqueous solutions, and encapsulation of the hydrophobic drug dipyridamole.

We synthesized a series of well-defined poly(dl-lactide)-b-poly(N,N-dimethylamino-2-ethyl methacrylate) (PDLLA-b-PDMAEMA) amphiphilic diblock copolymers by employing a three-step procedure: (a) ring-opening polymerization (ROP) of dl-lactide using n-decanol and stannous octoate, Sn(Oct)(2), as the initiating system, (b) reaction of the PDLLA hydroxyl end groups with bromoisobutyryl bromide, and (c) atom transfer radical polymerization, ATRP, of DMAEMA with the newly created bromoisobutyryl initiating site. The aggregation behavior of the prepared block copolymers was investigated by dynamic light scattering and zeta potential measurements at 25 degrees C in aqueous solutions of different pH values. The hydrophobic drug dipyridamole was efficiently incorporated into the copolymer aggregates in aqueous solutions of pH 7.40. High partition coefficient values were determined by fluorescence spectroscopy.

Molding block copolymer micelles: a framework for molding of discrete objects on surfaces.

Soft lithography based on photocurable perfluoropolyether (PFPE) was used to mold and replicate poly(styrene-b-isoprene) block-copolymer micelles within a broad range of shapes and sizes including spheres, cylinders, and torroids. These physically assembled nanoparticles were first formed in a selective solvent for one block then deposited onto substrates having various surface energies in an effort to minimize the deformation of the micelles due to attractive surface forces. The successful molding of these delicate nanoparticles underscores two advantages of PFPE as a molding material. First, it allows one to minimize particle deformation due to adsorption by using low energy substrates. Second, PFPE is not miscible with the organic micelles and thus prevents their dissociation. For spherical PS-b-PI micelles, a threshold value of the substrate surface energy for the mold to lift-off cleanly, that is, the particles remain adhered to the substrate after mold removal was determined to be around gamma congruent with 54 mJ/m2. For substrates with higher surface energies (>54 mJ/m2), the micelles undergo flattening which increase the contact area and thus facilitate molding, although at the expense of particle deformation. The results are consistent with theoretical predictions of a molding range for substrate surface energies, which depends on the size, shape, and mechanical properties of the particles. In a similar fashion, cylindrical PS-b-PI micelles remain on the substrate at surface energies gamma>or=54 mJ/m2 after a mold removal. However, cylindrical micelles behaved differently at lower surface energies. These micelles ruptured due to their inability to slide on the surfaces during mold lift-off. Thus, the successful molding of extended objects is attainable only when the particle is adsorbed on higher energy substrates where deformation can still be kept at a minimum by using stronger materials such as carbon nanotubes for the master.

pH-responsive aggregates from double hydrophilic block copolymers carrying zwitterionic groups. Encapsulation of antiparasitic compounds for the treatment of leishmaniasis.

A series of well-defined poly[(ethylene oxide)-b-2-(dimethylamino)ethyl methacrylate] (PEO-b-PDMAEMA) diblock copolymers were synthesized by atom transfer radical polymerization (ATRP) techniques. Post-polymerization reactions were performed to transform a portion of the tertiary amine groups of the PDMAEpsilonMA into phosphorozwitterions. The aggregation behavior of the prepared zwitterionic block copolymers was investigated by static and dynamic light scattering techniques at 25 and 37 degrees C, in weakly basic and acidic aqueous solutions. Antiparasitic drugs used for the treatment of Leishmania were incorporated into the copolymer aggregates. The effect of the solution pH, the zwitterion content, temperature, and the quantity of the incorporated drug on the aggregation behavior of the copolymers was tested.