Effectiveness of continuous chelation irrigation protocol in endodontics: a scoping review of laboratory studies.

This scoping review aimed to synthesize and explore the current boundaries and limitations of laboratory research on the effectiveness of continuous chelation irrigation protocol in endodontics. This scoping review was reported according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) Extension for Scoping Reviews. Literature search was conducted on Pubmed and Scopus to identify all laboratory studies evaluating smear layer and hard-tissue debris removal or, antimicrobial efficacy, or dentine erosion induced by continuous chelation. Two independent reviewers performed the all review steps and the relevant items were recorded. Seventy-seven potentially relevant studies were identified. Finally, 23 laboratory studies met the eligibility criteria for qualitative synthesis. Seven studies focused on the smear layer/debris removal outcome, 10 on antimicrobial activity, and 10 on dentine erosion. In general, the continuous chelation protocol was equally or more effective in the cleanliness of root canals and antimicrobial activity compared with traditional sequential protocol. In addition, etidronate solutions seemed to be milder chelating agents compared to those with EDTA, thus resulting in reduced or no dentine erosion and roughness modification. Yet, the methodological differences among the included studies limit the results' generalizability. The continuous chelation seems to be equally or more effective in all investigated outcomes when compared with the traditional sequential protocol. The methodological variability among the studies and shortcomings in the methods employed limit the generalizability and clinical relevance of the results. Standardized laboratory conditions combined with reliable three-dimensional investigation approaches are necessary to obtain clinically informative findings.

In Vitro Evaluation of Smear Layer and Debris Removal and Antimicrobial Activity of Different Irrigating Solutions.

OBJECTIVE: The aim of this in vitro study was to compare the smear layer and debris removal and antimicrobial activity of two dual-action irrigating solutions for continuous chelation (Triton; Brasseler, Savannah, USA and Dual Rinse HEDP; Medcem GmbH, Weinfelden, Switzerland) with a dual step irrigation protocol with sodium hypochlorite (NaOCl) followed by ethylenediaminetetraacetic acid (EDTA). METHODS: Thirty single-rooted single-canal teeth were divided into three groups (n=10) and irrigated with Triton, Dual Rinse HEDP mixed with 6% NaOCl and 6% NaOCl/17% EDTA. The teeth were observed under a scanning electron microscope (SEM) to assess the canal wall cleanliness. In addition, 80 dentine discs were contaminated with Candida albicans and 80 discs with Enterococcus faecalis and irrigated with Triton, Dual Rinse HEDP mixed with 6% NaOCl and 6% NaOCl/17% EDTA or not treated (n=20). Fifteen discs were used to evaluate colony-forming units, while 5 discs were analysed by SEM. Data were analysed using the Shapiro- Wilk, Kruskal-Wallis and One-Way ANOVA tests. RESULTS: Triton was statistically more effective than Dual Rinse HEDP and NaOCl/EDTA in removing debris (p<0.05), except with NaOCl/EDTA in the coronal third. Triton was more effective than Dual Rinse HEDP in removing the smear layer from the apical and middle thirds (p<0.05). All the irrigation protocols significantly re- duced the number of E. faecalis. The Triton group showed the lowest number of remaining C. albicans (p<0.05). CONCLUSION: Triton was the most effective irrigation solution in removing debris and as effective as NaOCl/ EDTA in removing the smear layer. Triton showed the highest efficacy against C. albicans. New irrigating solutions that provide continuous chelation may provide an alternative to current irrigation protocols.

Cone-Beam Computed Tomography Assessment of Prevalence of Procedural Errors in Maxillary Posterior Teeth.

A range of procedural errors can occur when performing endodontic treatment on posterior teeth. These errors may decrease the success rate in endodontic practice. This study assessed the prevalence of procedural errors and the quality of endodontic treatments in maxillary molars and premolars using cone-beam computed tomography (CBCT). CBCT scans from two private radiology centers were assessed retrospectively to ensure the same calculated sample size of 327 teeth for each of the four maxillary posterior tooth types (a total of 1,308 endodontically treated teeth). Image sets were evaluated for procedural errors categorized as follows: obturation length (overfilling or underfilling by >2 mm short of the root apex), missed canals, perforations, strip perforations (with extrusion of material into the furcation area), separated instruments in the root canal space, and root fracture. Data were analyzed with SPSS version 20 (SPSS Inc., Chicago, IL, USA), and frequency data was assessed using the Monte Carlo test at the 0.05 level of significance. The procedural errors most commonly reported in the present study were from most frequent to least frequent: underfilled canals (50.0%), missed canals (27.5%), overfilled canals (12.5%), apical perforations (5.0%), separated instruments (3.1%), and root fractures (1.9%). No strip perforations (with extrusion of material into the furcation area) were seen in the study (0%). Underfilled and missed root canals were the most frequent procedural errors identified in the present study. These findings underline the importance of more consideration of critical working length management during all stages of root canal treatment, greater awareness of root canal anatomy, and the use of imaging and diagnostic devices that enhance the ability to identify and treat root canals both safely and effectively.

The Biomechanical Behaviour and life span of a Three-Rooted Maxillary First Premolar with Different Access Cavity Designs: A Finite Element Analysis.

OBJECTIVE: The present study aimed to evaluate the influence of different access cavity designs on the biomechanical behaviour of a three-rooted maxillary first premolar using finite element analysis (FEA). METHODS: Three experimental FEA models were generated: the intact tooth (IT) model, the traditional access cavity (TAC) model, and the conservative access cavity (CAC) model. In both TAC and CAC models, root canals preparation was simulated as follows: the mesiobuccal and distobuccal canals with a final tip size of 30 and taper of 0.04 and the palatal canal with a final tip size of 35 and taper of 0.04. Cyclic loading of 50 N was simulated on the occlusal surface of the three models. The number of cycles until failure (NCF), the location of failure, stress distribution patterns, maximum von Mises (VM), and maximum principal stress (MPS) were all evaluated and compared. RESULTS: Both types of access cavity preparation caused a reduction in the lifelog of the tooth; when compared to the IT model the TAC model had a lifelog of 94.82% while the CAC model had a lifelog of 95.80%. The maximum VM stresses value was registered on the occlusal surface of the TAC model (7 MPa), while the minimum was on the occlusal surface of the IT (6.2 MPa). MPS analysis showed that the highest stress value was recorded on the occlusal surface of the CAC model (7.71 MPa), while the least was recorded on the occlusal surface of the TAC model (3.77 MPa). Radicular stresses were always of minimal value regardless the model. CONCLUSION: The relation between the access cavity margins and the functional load points is a deciding factor that influences the biomechanical behaviour and fatigue life of endodontically treated teeth. (EEJ-2023-01-03).

Evaluation of Dentine Structure Loss after Separated File Retrieval by Three Different Techniques: An Ex-vivo Study.

OBJECTIVE: To evaluate the success rate of retrieving separated instrument, the root canal volume changes using cone-beam computed tomography and the retrieval time using Ruddle's technique, Terauchi file retrieval kit (TFRK) and Endo Rescue kit. METHODS: Sixty human mandibular first molars were selected, and a 4-mm portion of #25/.04 rotary files were separated in the middle third of moderately curved mesio-buccal canals. Teeth were randomly assigned into three groups (n=20): R group, in which separated files were retrieved according to Ruddle's technique; T group, in which separated files were retrieved using TFRK and E group, in which separated files were retrieved using Endo Rescue kit. Values were analyzed using IBM SPSS. Results presented as mean+-standard deviation and 95% confidence interval for the root canal volume and time and frequency (%) for success rate. Comparisons of differences in time, canal volume and success rate between groups were assessed. RESULTS: Retrieval was successful in R and T groups (70% and 80% respectively) without any significant difference between them (p=0.715), while E group hadn't any successful samples (0.0%) with significant difference compared to R and T groups (p<0.001, p<0.001). E group showed the highest increase in canal volume followed by R group, while T group exhibited the lowest increase in canal volume. There was no significant difference in the mean retrieval time between R and T groups (p=0.815). CONCLUSION: TFRK provides a more conservative way for retrieval of separated instrument from the middle third of moderately curved canals. (EEJ-2023-01-01).

Stronger than Ever: Multifilament Fiberglass Posts Boost Maxillary Premolar Fracture Resistance.

This paper investigates the influence of cavity configuration and post-endodontic restoration on the fracture resistance, failure mode and stress distribution of premolars by using a method of fracture failure test and finite elements analysis (FEA) coupled to Weibull analysis (WA). One hundred premolars were divided into one control group (Gcontr) (n = 10) and three experimental groups, according to the post-endodontic restoration (n = 30), G1, restored using composite, G2, restored using single fiber post and G3, restored using multifilament fiberglass posts (m-FGP) without post-space preparation. Each experimental group was divided into three subgroups according to the type of coronal cavity configuration (n = 10): G1O, G2O, and G3O with occlusal (O) cavity configuration; G1MO, G2MO, and G3MO with mesio-occlusal (MO); and G1MOD, G2MOD, and G3MOD with mesio-occluso-distal (MOD). After thermomechanical aging, all the specimens were tested under compression load, and failure mode was determined. FEA and WA supplemented destructive tests. Data were statistically analyzed. Irrespective of residual tooth substance, G1 and G2 exhibited lower fracture resistance than Gcontr (p < 0.05), whereas G3 showed no difference compared to Gcontr (p > 0.05). Regarding the type of restoration, no difference was highlighted between G1O and G2O, G1MO and G2MO, or G1MOD and G2MOD (p > 0.05), whereas G3O, G3MO, and G3MOD exhibit higher fracture resistance (p < 0.05) than G1O and G2O, G1MO and G2MO, and G1MOD and G2MOD, respectively. Regarding cavity configuration: in G1 and G2, G1O and G2O exhibited higher fracture resistance than G1MOD and G2MOD, respectively (p < 0.05). In G3, there was no difference among G3O, G3MO and G3MOD (p > 0.05). No difference was found among the different groups and subgroups regarding the failure mode. After aging, premolars restored with multifilament fiberglass posts demonstrated fracture resistance values comparable to those of an intact tooth, irrespective of the different type of cavity configuration.

Effect of Continuous Chelation Irrigation Using DualRinse HEDP+3% NaOCl with or without High-power Sonic Activation on Debris and Smear Layer Removal.

OBJECTIVE: This study aimed to assess the effect of sodium hypochlorite (NaOCl) combined with a novel chelating agent DualRinse HEDP (Medcem GmbH, Weinfelden, Switzerland), a product consisting of 0.9 g of 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP) powder, with or without high-power sonic activation on debris and smear layer removal. METHODS: Seventy-five mandibular premolars were divided into 5 groups (n=15) and treated with different irrigation protocols: group 1 (D3N), DualRinse HEDP+3% NaOCl without activation; group 2 (D3NA), DualRinse HEDP+3% NaOCl with activation (EDDY, VDW, Munich, Germany) during the final irrigation; group 3 (3NE), 3% NaOCl+17% Ethylenediaminetetracetic acid (EDTA)+3% NaOCl without activation; group 4 (3NEA), 3% NaOCl+17% EDTA+3% NaOCl with activation during the final irrigation; group 5 (NC), negative control group, 0.9% saline. Samples were analysed by scanning electron microscopy (SEM) to evaluate residual debris and smear layer at 3 levels of the root canal: coronal, middle, and apical. Statistical analysis was performed with a level of significance set at p<0.05. The normality distribution of scores within each group was assessed using Kolmogorov-Smirnov and Shapiro-Wilk tests. A Kruskal-Wallis test followed by multiple comparison tests was used to compare scores among the 5 groups on the apical, middle, and coronal levels of the root canal. A Friedman test followed by multiple comparison tests was used to compare scores within the apical, middle, and coronal levels for each treatment group. RESULTS: Debris score was significantly the lowest for D3NA, followed by D3N, 3NEA and 3NE at all root levels (p<0.05). The smear layer score was significantly the lowest for D3NA, followed by D3N, 3NEA and 3NE only at the apical level, while no significant difference was found in the middle and coronal levels between the groups (p<0.05). DualRinse HEDP resulted in less debris and smear layer compared to the classic approach of NaOCl without activation. Implementing sonic activation further improved debris and smear layer removal. CONCLUSION: DualRinse HEDP+3% NaOCl improved debris removal at all levels and smear layer elimination at the apical level of the root canal. These results were further enhanced when adding high-power sonic activation. (EEJ-2022-09-116).

Micro-shear bond strength of different calcium silicate materials to bulk-fill composite.

Introduction: This study aimed to compare the micro-shear bond strength (µSBS) performances of two resin-based calcium silicate-based cement (CSC) (TheraCal PT and TheraCal LC), Biodentine, and two modified-MTA CSC materials (NeoMTA 2 and BioMTA+) to bulk-fill restorative material. Materials and Methods: Fifty 3D printed cylindrical resin blocks with a central hole were used (2 mm in depth and 4 mm in diameter). CSCs were placed in the holes (per each group n = 10) and incubated for 24 h. Cylindrical polyethylene molds (2 mm in height and diameter) were used to place the bulk-fill restorative materials on the CSCs and polymerize for 20 s. Then, all specimens were incubated for 24 h at 37 °C at a humidity of 100%. Specimen's µSBSs were determined with a universal testing machine. Data were analyzed with one-way ANOVA (Welch) and Tamhane test. Results: Statistically higher µSBS was found for TheraCal PT (29.91 ± 6.13 MPa) (p < 0.05) respect to all the other materials tested. TheraCal LC (20.23 ± 6.32 MPa) (p > 0.05) reported higher µSBS than NeoMTA 2 (11.49 ± 5.78 MPa) and BioMTA+ (6.45 ± 1.89 MPa) (p < 0.05). There was no statistical difference among TheraCal LC, NeoMTA 2 and Biodentine (15.23 ± 7.37 MPa) and between NeoMTA 2 and BioMTA+ (p > 0.05). Conclusion: Choosing TheraCal PT as the pulp capping material may increase the adhesion and µSBS to the bulk-fill composite superstructure and sealing ability.

Efficacy of different irrigant activation devices in removing dentin debris from an artificial isthmus connecting curved canals.

The aim of this study was to evaluate the debridement efficacy of sonic irrigation (EDDY; VDW, Munich, Germany and EndoActivator; Dentsply-Sirona, Ballaigues, Switzerland) and ultrasonically activated irrigation (Irrisafe; Satelec Acteon, Merignac, France) in a simulated canal isthmus connecting curved canals. Transparent resin blocks were produced containing two curved canals connected with an isthmus. The isthmus was then filled with dentin debris. Three irrigant activation cycles were performed and the amount of remaining debris was compared analysing pictures taken after each activation cycle. Data were statistically analysed using one-way ANOVA and post hoc Tukey tests at a significance level of p < 0.05. EDDY showed greater efficiency in removing dentin debris from the simulated isthmus than the other techniques tested. An increase in the activation time enhanced the efficiency of both EDDY and ultrasonically activated irrigation in debris removal.

Effectiveness of intentional replantation in managing teeth with apical periodontitis: A systematic review.

BACKGROUND: Intentional replantation (IR) to treat disease of endodontic origin remains controversial. While IR has been advocated by some clinicians as another valid treatment option, others consider it as a treatment procedure of last resort. OBJECTIVE: To systematically review and critically evaluate the effectiveness of IR compared with nonsurgical root canal treatment/retreatment or apical surgery in terms of clinical and patient-related outcomes in managing permanent teeth with apical periodontitis (AP). METHODS: A literature search of five databases (PubMed, Embase, Scopus, Web of Science and Cochrane Central register of Controlled Trials), and the grey literature (Networked Digital Library of Theses and Dissertations, Open Access Theses and Dissertations, DART-Europe E-theses Portal, British Library E-Theses Online Service), from inception to November 2021, was conducted. Randomised clinical trials, comparative clinical trials (CCTs), nonrandomised, retrospective, and prospective comparative cohort and case-control two arm studies which evaluated clinical and/or patient-related outcomes of permanent teeth with AP treated with IR compared with nonsurgical root canal treatment/retreatment or apical surgery were identified. The quality of the studies was appraised using the Cochrane risk of bias tool for randomized trials (RoB 2.0), the Robins-I for nonrandomized controlled clinical trials and the Newcastle-Ottawa scale for observational studies. Two independent reviewers were involved in the literature selection, performed the data extraction and the appraisal of the studies identified; disagreements were resolved in conjunction with a third reviewer. RESULTS: No comparative study was identified from the literature search. Four longitudinal studies (one prospective and three retrospective) were identified during the screening of titles and abstracts but were excluded after reading the full text, because only IR was evaluated (single arm studies). DISCUSSION: The available evidence on IR is mainly based on observational studies, which reported high overall mid- to long-term survival, and low complication rates. The results suggest that IR may represent an alternative treatment procedure to solve problems of endodontic origin. However, in the absence of high-quality evidence from CCTs, clinical decision-making should be on a case-by-case basis and in accordance with the clinician's experience and the patient's preference. CONCLUSION: Clinical studies showed that IR may be a treatment modality to manage problems of endodontic origin. However, clinical trials comparing the effectiveness of IR with nonsurgical root canal treatment/retreatment or apical surgery are still required given the paucity of evidence.

The micro-shear bond strength of new endodontic tricalcium silicate-based putty: An in vitro study.

This study aimed to compare in vitro micro-shear bond strength (µSBS) of three different endodontic tricalcium silicate-based materials in contact with a bulk-fill resin-based composite. Thirty cylindrical resin blocks with a hole in the centre (2 mm in depth and 4 mm in diameter) were manufactured with a 3D printer and divided into three groups (n = 10), depending on the calcium silicate cement used: light curing TheraCal LC (Bisco, Schaumburg, IL, USA), liquid-powder NeoMTA 2 (NuSmile Avalon Biomed, Bradenton, FL, USA) and putty NeoPutty (NuSmile, Houston, TX, USA). Each sample was stored for 24 h at 37°C and 100% humidity. Then, after adhesive placement, the restorative material Filtek bulk-fill (3 M ESPE, St. Paul, MN, USA) was placed over the capping material using cylindrical plastic capsules (2 mm height and 2 mm) and polymerised for 20 s. Specimens were then tested in a universal testing machine for the compression load resulting in the µSBS. The data were compared with the one-way ANOVA (Welch) and the Tamhane test. The mean value was significantly higher in the TheraCal LC group than in the other two groups (p < 0.05). There was no significant difference between NeoMTA 2 and NeoPutty groups (p > 0.05). The majority of failure modes for all groups were cohesive within biomaterial. Using TheraCal LC in the pulp capping procedure can result in higher bond strength values to the tested bulk-fill resin-based composite than NeoMTA 2 and NeoPutty.

Comparison of shaping ability of the Reciproc Blue and One Curve with or without glide path in simulated S-shaped root canals.

Objectives: This study aimed to assess the impact of a glide-path on the shaping ability of 2 single-file instruments and to compare the centering ability, maintenance of original canal curvatures and area of instrumentation in simulated S-shaped root canals. Materials and Methods: Forty simulated S-shaped root canals were used and were prepared with One Curve (group OC), One G and OC (group GOC), Reciproc Blue (group RB) and R-Pilot and RB (group PRB) and scanned before and after instrumentation. The images were analyzed using AutoCAD. After superimposing the samples, 4 levels (D1, D2, D3, and D4) and 2 angles (Δ1 and Δ2) were established to evaluate the centering ability and modification of the canal curvatures. Then, the area of instrumentation (ΔA) was measured. The data were analyzed using 2-way analysis of variance and Tukey's test for multiple comparisons (p < 0.05). Results: Regarding the centering ability in the apical part (D3, D4), the use of the glide-path yielded better results than the single-file groups. Among the groups at D4, OC showed the worst results (p < 0.05). The OC system removed less material (ΔA) than the RB system, and for Δ1, OC yielded a worse result than RB (p < 0.05). Conclusions: The glide-path improved the centering ability in the apical part of the simulated S-shaped canals. The RB system showed a better centering ability in the apical part and major respect of the canal curvatures compared with OC system.

Present status and future directions: Surgical extrusion, intentional replantation and tooth autotransplantation.

Surgical extrusion, intentional replantation and tooth autotransplantation procedures are important treatment options that clinicians may consider performing in their day-to-day clinical practice. Despite compromised teeth are generally considered for extraction, clinicians must be aware that these cases could be suitable for management by these alternative predictable treatment options. Surgical extrusion, intentional replantation or tooth autotransplantation have similar treatment protocols which includes atraumatic tooth extraction, visualisation of the root portion and replantation. Surgical extrusion is defined as the 'procedure in which the remaining tooth structure is repositioned at a more coronal/supragingival position in the same socket in which the tooth was located originally'. Intentional replantation is defined as the 'deliberate extraction of a tooth and after evaluation of root surfaces, endodontic manipulation and repair, placement of the tooth back into its original position'. Tooth autotransplantation is defined as the 'transplantation of an unerupted or erupted tooth in the same individual, from one site to another extraction site or a new surgically prepared socket'. The same team previously published a narrative review (International Endodontic Journal. 2020, 53, 1636) and European Society of Endodontology position statement (International Endodontic Journal. 2020, 54, 655) on this topic in International Endodontic Journal. The aim of the current updated review was to provide the reader a complete overview and background on these procedures, to established clear clinical protocols and step-by-step for technically perform these therapies in their clinical practice and to establish future directions on the topics. The clinicians must periodically update their knowledge about these three procedures to achieve success.

Instrumentation kinematics does not affect bacterial reduction, post-operative pain, and flare-ups: A randomized clinical trial.

AIM: This randomized clinical trial aimed to assess the effect of instrumentation kinematics (reciprocation or continuous rotation) on bacterial reduction, post-operative pain, and incidence of flare-ups after root canal treatment of single-rooted mandibular premolars with asymptomatic apical periodontitis. METHODOLOGY: Sixty-six patients were included in this prospective, parallel, randomized clinical trial. Patients were randomly allocated into two groups (N = 33) according to the kinematics of the shaping instrument: WaveOne Gold (WO) used in reciprocation or One Shape (OS) used in continuous rotation. Under complete asepsis, bacterial samples were taken before (S1) and after (S2) a standard cleaning and shaping protocol. Evaluation of bacterial reduction was done by both culture technique and quantitative real-time polymerase chain reaction (qPCR) analysis. Post-operative pain was evaluated using the visual analogue scale (VAS) after 24, 48, and 72 h following treatment, while flare-ups were recorded as a binary outcome (Yes/No). Independent and paired t-tests were used for inter- and intra-group comparisons for bacterial count data, respectively. For post-operative pain score, inter-group comparisons were analyzed using the Mann-Whitney U-test while intra-group comparisons were analyzed using Friedman test followed by pairwise comparisons utilizing the Wilcoxon signed rank test with Bonferroni correction. The significance level was set at p ≤ .05 within all tests. RESULTS: All the allocated participants received the intervention and were analysed. The comparison between culture and qPCR methods showed that qPCR analysis demonstrated significantly higher pre-instrumentation baseline bacterial count (p < .05). The percentage of bacterial reduction, detected by either method, significantly decreased after instrumentation using either rotation or reciprocation kinematics (p < .05). However, the difference between the WOG or OS files was statistically non-significant (p > .05). The intra-group comparisons showed a significant reduction in post-operative pain with time (p < .05) for both groups. However, the inter-group comparison demonstrated that the difference in post-operative pain after the use of either WOG or OS was statistically non-significant (p > .05). The incidence of flare-ups between both groups was also not-significant (p = 1). CONCLUSIONS: Shaping kinematics, either rotation or reciprocation motions, had no impact on bacterial reduction and the incidence of post-operative pain and flare-ups after root canal preparation of single-rooted premolars with asymptomatic apical periodontitis.

Worldwide Assessment of the Mandibular First Molar Second Distal Root and Root Canal: A Cross-sectional Study with Meta-analysis.

INTRODUCTION: This study assessed the prevalence of radix entomolaris and 2 canals at the distal aspect of mandibular first molars among different geographic regions by means of cone-beam computed tomographic imaging. METHODS: Precalibrated observers from 23 worldwide geographic locations followed a standardized screening protocol to assess 5750 cone-beam computed tomographic images of mandibular first molars (250 per region), gathering demographic data and recording the presence of radix entomolaris and a second canal at the distal aspect of teeth. Intra- and interrater reliability tests were conducted and comparisons among groups were performed using proportions and odds ratio forest plots. The significance level was set at 5%. RESULTS: The results of intra- and interrater tests were above 0.79. The prevalence of radix entomolaris varied from 0.9% in Venezuela (95% confidence interval [CI], 0%-1.9%) to 22.4% in China (95% CI, 17.2%-27.6%). Regarding the proportion of a second distal canal, it ranged from 16.4% in Venezuela (95% CI, 11.8%-21.0%) to 60.0% in Egypt (95% CI, 53.9%-66.1%). The East Asia subgroup was associated with a significantly higher prevalence of an extra distolingual root, whereas the American subgroup, the American native ethnic group, and elderly patients were linked to significantly lower percentages of a second canal at the distal aspect of teeth. No significant differences were noted between male or female patients. CONCLUSIONS: The overall worldwide prevalence rates of radix entomolaris and a second canal at the distal aspect of the mandibular first molar were 5.6% and 36.9%, respectively. The East Asia geographic region and Asian ethnic group had a higher prevalence of a second distal root.

Effectiveness of XP-Endo Finisher and Passive Ultrasonic Irrigation in the Removal of the Smear Layer Using two Different Chelating Agents.

STATEMENT OF THE PROBLEM: The smear layer may harbor microorganisms and necrotic pulp tissue, jeopardizing irrigant penetration. Recently, Dual Rinse®, a weak chelating agent, has been introduced to the market. However, its chelating capacity in the final irrigation protocol with different activation systems has not yet been deeply analyzed. PURPOSE: The aim of this ex vivo study was to evaluate the effectiveness of passive ultrasonic irrigation (PUI) and XP-endo Finisher (XP) on smear layer removal in combination with two chelating agents, ethylenediaminetetraacetic acid (EDTA) and etidronic acid (HEDP). MATERIALS AND METHOD: This in vitro, experimental study evaluated fifty-two single-rooted human teeth were standardized to 16 mm in length. Root canal instrumentation was performed by the ProTaper Gold system up to the F4 file. The apical end of the samples was sealed with wax to simulate a closed system. Teeth from group 1 (n=24) were irrigated with 3% sodium hypochlorite (NaOCl) and 17% EDTA, while teeth from group 2 (n=24) were irrigated with 3% NaOCl mixed 9% HEDP. Both groups were divided into two subgroups (n=12) depending on the activation system used: XP (group XP-EDTA and XP-HEDP) or PUI (group PUI-EDTA and PUI-HEDP). The specimens were evaluated by scanning electron microscopy at 3, 5 and 8mm from the apex. Statistical analysis was performed using ANOVA and Bonferroni tests considering p> 0.05 as significant. RESULTS: PUI-EDTA was the most effective at removing the smear layer, with a statistically significant difference from XP-EDTA (p< 0.042) and group XP-HEDP (p< 0.003). There were no statistically significant differences among the other groups. CONCLUSION: Under the conditions of this ex vivo study, no activation system was able to completely remove the smear layer from the root canal walls. However, the combination of NaOCl with ultrasonically activated EDTA obtained better results than the other treatments.

Effect of a novel laser-initiated photoacoustic activation of a solvent or sodium hypochlorite in the removal of filling remnants after retreatment of curved root canals.

BACKGROUND: This study aimed to evaluate the effect of Er:YAG laser-initiated shockwave-enhanced emission of photoacoustic streaming (SWEEPS®) and passive ultrasonic irrigation (PUI) combining thymol-based solvent or sodium hypochlorite (NaOCl) in the removal of filling remnants from curved canals. METHODS: Forty-eight curved root canals were instrumented and filled with an epoxy-resin-based sealer and gutta-percha. The canals were retreated with a Wave One Gold primary file (tip size 25; variable taper) and sodium hypochlorite (NaOCl). After the retreatment, the samples were randomly divided into four groups according to the additional irrigation protocol: PUI/NaOCl, PUI/solvent, SWEEPS®/NaOCl or SWEEPS®/solvent. The volume of filling material in root canal was measured after root canal filling, after mechanical retreatment, after final irrigation protocol and after additional irrigation protocol, using micro-CT. The results were analyzed using Kruskal-Wallis test with the post-hoc Mann-Whitney U test and Wilcoxon test (α=0.05). RESULTS: In the PUI group, irrigation with the solvent or NaOCl resulted in similar filling reduction (p = 0.224). In the SWEEPS® group, irrigation with NaOCl resulted in a significantly greater filling reduction compared to the solvent (p = 0.021). The SWEEPS®/NaOCl group was more effective than the PUI/NaOCl group (p = 0.008). No significant differences were found between PUI/solvent and SWEEPS® groups (p>0.05) and PUI/NaOCl and SWEEPS®/solvent group (p>0.05). CONCLUSION: Although all tested protocols improved the removal of filling remnants from curved root canal, the SWEEPS® was more successful than PUI when NaOCl was used. Both tested techniques showed similar efficacy when in combination with the solvent.

Effects of ultrasonic refinement on endodontic access cavity walls: A microcomputed tomography analysis.

OBJECTIVES: The present study aimed in assessing the coronal defects after access cavity finishing and refinement by micro. METHODS: Access cavities on thirty molars were prepared using a diamond bur. To finish and refine the access cavity, the Endo-Z was used in group 1 (n=15) and Start X 1 in group 2. Preparation time was recorded. A micro-CT scan was done before and after access preparation. Formation and location of the new defects were registered, the extension of defects calculated and the direction of the extension registered, preparation time and surface roughness determined (P < 0.05). RESULTS: Preparation time was significantly higher with ultrasonics (P <0.001). Internal walls showed smoother surfaces for Endo-Z group. Newly counts and extension length of defects weren't significantly different between groups (P > .05). CONCLUSION: Ultrasonic tips induced new cracks. Both instruments caused the extension of cracks. Ultrasonic tips requires more time and results in significantly rougher surfaces.

The fate of overfilling in root canal treatments with long-term follow-up: a case series.

This study describes 6 cases of endodontic overfilling with successful clinical outcomes during long-term (up to 35 years) radiographic follow-up. Successful endodontic treatment depends on proper shaping, disinfection, and obturation of root canals. Filling materials should completely fill the root canal space without exceeding the anatomical apex. Overfilling may occur when the filling material extrudes into the periapical tissues beyond the apex. The present case series describes 6 root canal treatments in which overfilling of root canal sealer and gutta-percha accidentally occurred. Patients' teeth were periodically checked with periapical radiographs in order to evaluate the outcomes during long-term follow-up. All cases showed healing and progressive resorption of the extruded materials in the periapex. The present cases showed that if a 3-dimensional seal was present at the apical level, overfilling did not negatively affect the long-term outcomes of root canal treatment.

A comparison of near-infrared imaging with other diagnostic tools for dental caries.

Dental caries is one of the most common diseases in the world, and global incidence rates are increasing. The early detection of dental lesions enables a conservative approach to be employed and represents a priority in modern dentistry. Recent studies have suggested that conventional diagnostic methods, such as visual tactile inspection and X-ray examination, exhibit low sensitivity and are not very effective in early diagnoses. Consequently, late detection of decay is associated with an increased loss of tooth structure. New diagnostic systems based on optical properties have been developed to facilitate early detection. Several studies have evaluated the performance of near-infrared imaging (NIRI) as an early diagnostic tool. NIRI using light ranging from 700 to 1700 nm has demonstrated better optical properties compared to conventional optical systems using light in the visible spectra. NIRI enables deeper penetration of the light in the tooth tissue, weak scattering with lower background noise and strong photon absorption with detailed images. Several in-vivo studies have demonstrated that NIRI technology has the potential to improve performance compared with current diagnostic methods. NIRI exhibits increased sensitivity compared to radiographs and is more suitable to identify approximal enamel lesions. This paper aimed to review these recent advances and their potential applications in daily clinical practice.