Determination of concentration of basic sites on oxides by IR spectroscopy.

As it is commonly known, CO2 reacts simultaneously with basic O2- and basic OH sites on oxides forming carbonates and bicarbonates, which can be followed by infrared spectroscopy (IR). However, here, we succeeded to elaborate experimental conditions under which CO2 reacted solely with O2- forming CO32- for ZrO2 and CeO2, and calculated the extinction coefficients of diagnostic bands of carbonate and bicarbonate species. For the first time, the developed IR method enabled the concentrations of O2- and basic OH for ZrO2, CeO2, Al2O3 and CuO to be measured separately. Moreover, in the case of all IR studied oxides, the sum of concentrations of O-2 and basic OH basic sites was comparable with the concentration determined by pulse adsorption of CO2. Thus, the presented extinction coefficients can be applied for IR basicity studies of various basic catalysts. We also followed the effect of thermal treatment on basicity of oxides.

Basic Sites on Alumina with Preadsorbed Ethanol and Ammonia-An IR Study.

The adsorption of ethanol and ammonia changes the basic properties of alumina, and new basic sites are created. Ethanol reacts with surface Al-OH groups, forming ethoxy group Al-O-C2H5. The substitution of Al-OH by Al-O-C2H5 increases the negative charge of neighbouring oxygen atoms, and they became sufficiently basic to react with adsorbed CO2 forming carbonate species CO32-. These carbonates were found to be monodentate and bidentate species. Preadsorption of ammonia also increases the basicity of alumina, but the mechanism is different than for ethanol adsorption. Adsorbed ammonia interacts with surface Lewis acid sites being three-coordinated aluminium atoms. This interaction is accompanied by an electron transfer from ammonia molecules to surface sites, and increases the basicity of the neighbouring oxygens, which can react with the absorbed CO2. The carbonate species formed are polydentate ones.

Ethoxy Groups on ZrO2, CuO, CuO/ZrO2 Al2O3, Ga2O3, SiO2 and NiO: Formation and Reactivity.

The reaction of ethanol with surface OH groups on ZrO2, CuO/ZrO2, CuO, Al2O3, Ga2O3, NiO, and SiO2 was studied by IR spectroscopy. The basicity of oxides was followed by CO2 adsorption, and their ability to oxidize was investigated by H2-TPR. It has been found that ethanol reacts with surface OH groups forming ethoxy groups and water. Some oxides: ZrO2, CuO/ZrO2, Al2O3, and Ga2O3 contain several kinds of OH groups (terminal, bidentate, and tridentate) and terminal hydroxyls react with ethanol in the first order. Two kinds of ethoxyls are formed on these oxides: monodental and bidental ones. On the other hand, only one kind of ethoxy group is formed on CuO and NiO. The amount of ethoxy groups correlates with the basicity of oxides. The biggest amount of ethoxyls is produced on the most basic: ZrO2, CuO/ZrO2, and Al2O3, whereas the smallest amount of ethoxyls is produced on CuO, NiO, and Ga2O3, i.e., on oxides of lower basicity. SiO2 does not form ethoxy groups. Above 370 K ethoxy groups on CuO/ZrO2, CuO, and NiO are oxidized to acetate ions. The ability of oxides to oxidize ethoxyl groups increases in the order NiO < CuO < CuO/ZrO2. The temperature of the peak in the H2-TPR diagram decreases in the same order.

IR Studies of Ethoxy Groups on CeO2.

The reaction of ethanol with a surface of CeO2 was studied using IR spectroscopy. In some experiments, CeO2 was pretreated in a vacuum at 820 K which caused a partial reduction. In other experiments, CeO2 was reduced with hydrogen at 770 K. We also used CeO2 oxidized by oxygen treatment at 670 K. At low coverages, ethoxy groups and new surface OH groups were formed and water was not produced. On the other hand, at higher loading surfaces, Ce-OH was consumed and ethoxy groups and water were formed. Three kinds of ethoxyls were found on CeO2: monodentate, bidentate, and tridentate ones. They were characterized by various frequencies of symmetrical, asymmetrical, and combinational bands of C-C-O units. The reduction of CeO2 increased the contribution of tridentate ethoxyls and the oxidation increased the contribution of monodentate ones. At higher temperatures, ethoxy groups were oxidized to acetate ions with the formation of new surface OH groups. Monodentate ethoxyls were the most reactive and tridentate ones were the least reactive during oxidation. The amounts of acetate species were the highest for the oxidized CeO2.

Ethoxy Groups on ZrO2, CuO, and CuO/ZrO2 Studied by IR Spectroscopy.

The formation, properties, decomposition and reactions of ethoxy groups on ZrO2, CuO, and CuO/ZrO2 were followed by IR spectroscopy. The reaction of ethanol with terminal Zr-OH groups leads to the formation of monodendate ethoxy groups (type I), whereas the reaction of ethanol with tribridged Zr-OH grups results in the formation of bidendate ethoxyls (type II). In both cases, water is produced. Ethoxy groups of type II were also formed on CuO. The type of the surface species detected after interaction of ethanol with CuO/ZrO2 was the same as detected for both oxides (i.e., ZrO2 and CuO) separately. This suggests that no new phase was formed in the mixed oxide system. At higher temperatures, ethoxy groups were oxidized forming acetate ions. Gaseous ethanol present in the cell was oxidized to acetaldehyde without the intermediacy of ethoxy groups.

Modulation of ODH Propane Selectivity by Zeolite Support Desilication: Vanadium Species Anchored to Al-Rich Shell as Crucial Active Sites.

The commercially available zeolite HY and its desilicated analogue were subjected to a classical wet impregnation procedure with NH4VO3 to produce catalysts differentiated in acidic and redox properties. Various spectroscopic techniques (in situ probe molecules adsorption and time-resolved propane transformation FT-IR studies, XAS, 51V MAS NMR, and 2D COS UV-vis) were employed to study speciation, local coordination, and reducibility of the vanadium species introduced into the hierarchical faujasite zeolite. The acid-based redox properties of V centres were linked to catalytic activity in the oxidative dehydrogenation of propane. The modification of zeolite via caustic treatment is an effective method of adjusting its basicity-a parameter that plays an important role in the ODH process. The developed mesopore surface ensured the attachment of vanadium species to silanol groups and formation of isolated (SiO)2(HO)V=O and (SiO)3V=O sites or polymeric, highly dispersed forms located in the zeolite micropores. The higher basicity of HYdeSi, due to the presence of the Al-rich shell, aided the activation of the C-H bond leading to a higher selectivity to propene. Its polymerisation and coke formation were inhibited by the lower acid strength of the protonic sites in desilicated zeolite. The Al-rich shell was also beneficial for anchoring V species and thus their reducibility. The operando UV-vis experiments revealed higher reactivity of the bridging oxygens V-O-V over the oxo-group V=O. The (SiO)3V=O species were found to be ineffective in propane oxidation when temperature does not exceed 400 °C.

Nitrogen as a Probe Molecule for the IR Studies of the Heterogeneity of OH Groups in Zeolites.

One of the methods of IR studies of the heterogeneity of Si-OH-Al groups in zeolites is the investigation of the frequency shift of the band of free OH bands restored upon the adsorption of ammonia and subsequent desorption at increasing temperatures. We extended this method by following the shift of the band of the OH group interacting by hydrogen bonding with nitrogen. The advantage of nitrogen, compared with CO, which has been commonly used as a probe molecule in studies on hydrogen bonding, is that for nitrogen the frequency shift is smaller than for CO and therefore there is no overlapping of shifted OH band with the bands of ammonium ions. For zeolites NaHY, HMFI, and HBEA, the frequency shift of IR bands of both free and hydrogen-bonded Si-OH-Al with the increase of ammonia desorption temperature evidences the heterogeneity of these hydroxyls. On the other hand, in zeolite HFAU of Si/Al = 31, Si-OH-Al were found to be homogeneous. Heterogeneity of OH groups may be explained both by the presence of Si-OH-Al of various number of Al near the bridge and of Si-OH-Al of various geometry.

The Properties of Cu Ions in Zeolites CuY Studied by IR Spectroscopy.

The properties of both Cu2+ and Cu+ ions in zeolite CuY were followed with NO and CO as probe molecules. Cu2+ was found to be located in SII, SII*, and SIII sites, whereas Cu+ was found in SII and SII* sites. The fine analysis of the spectra of Cu2+-NO and Cu+-CO adducts suggests that both in SII and in SII* sites two kinds of Cu cations exist. They differ in the positive charge, which may be related to the varying numbers of AlO4- in close proximity. The experiments of NO and CO adsorption and desorption evidenced that both Cu2+ and Cu+ sites of highest positive charge bind probe molecules most strongly but activate them to a lesser extent than the Cu sites of lowest positive charge. The experiments of reduction with hydrogen evidenced that the Cu ions of higher positive charge are first reduced by hydrogen. On the other hand, Cu sites of the lowest positive charge are first oxidized by oxygen. The experiments with CuNaY zeolites of various Cu contents suggest that the first introduced Cu (at low Cu contents) created Cu+, which was the most neutralized by framework oxygens. Such Cu cations are the most stabilized by framework oxygens.

Oxidation of Ethanol in Cu-Faujasites Studied by IR Spectroscopy.

In this study, IR studies of the coadsorption of ethanol and CO on Cu+ cations evidenced the transfer of electrons from ethanol to Cu+, which caused the lowering of the frequency of the band attributed to CO bonded to the same Cu+ cation due to the more effective π back donation of d electrons of Cu to antibonding π* orbitals of CO. The reaction of ethanol with acid sites in zeolite HFAU above 370 K produced water and ethane, polymerizing to polyethylene. Ethanol adsorbed on zeolite Cu(2)HFAU containing acid sites and Cu+exch also produced ethene, but in this case, the ethene was bonded to Cu+ and did not polymerize. C=C stretching, which is IR non-active in the free ethene molecule, became IR active, and a weak IR band at 1538 cm-1 was present. The reaction of ethanol above 370 K in Cu(5)NaFAU zeolite (containing small amounts of Cu+exch and bigger amounts of Cu+ox, Cu2+exch and CuO) produced acetaldehyde, which was further oxidized to the acetate species (CH3COO-). As oxygen was not supplied, the donors of oxygen were the Cu species present in our zeolite. The CO and NO adsorption experiments performed in Cu-zeolite before and after ethanol reaction evidenced that both Cu+ox and Cu2+ (Cu2+exch and CuO) were consumed by the ethanol oxidation reaction. The studies of the considered reaction of bulk CuO and Cu2O as well as zeolites, in which the contribution of Cu+ox species was reduced by various treatments, suggest that ethanol was oxidized to acetaldehyde by Cu2+ox (the role of Cu+ox could not be elucidated), but Cu+ox was the oxygen donor in the acetate formation.

On the Role of Protonic Acid Sites in Cu Loaded FAU31 Zeolite as a Catalyst for the Catalytic Transformation of Furfural to Furan.

The aim of the present paper is to study the speciation and the role of different active site types (copper species and Brønsted acid sites) in the direct synthesis of furan from furfural catalyzed by copper-exchanged FAU31 zeolite. Four series of samples were prepared by using different conditions of post-synthesis treatment, which exhibit none, one or two types of active sites. The catalysts were characterized by XRD, low-temperature sorption of nitrogen, SEM, H2-TPR, NMR and by means of IR spectroscopy with ammonia and CO sorption as probe molecules to assess the types of active sites. All catalyst underwent catalytic tests. The performed experiments allowed to propose the relation between the kind of active centers (Cu or Brønsted acid sites) and the type of detected products (2-metylfuran and furan) obtained in the studied reaction. It was found that the production of 2-methylfuran (in trace amounts) is determined by the presence of the redox-type centers, while the protonic acid sites are mainly responsible for the furan production and catalytic activity in the whole temperature range. All studied catalysts revealed very high susceptibility to coking due to polymerization of furfural.

Reduction and Oxidation of Cu Species in Cu-Faujasites Studied by IR Spectroscopy.

The process of reduction (by hydrogen and ethanol) and oxidation (by oxygen and NO) of Cu sites in dealuminated faujasite-type zeolites (of Si/Al = 31) was studied by infrared (IR) spectroscopy with CO (for Cu+) and NO (for Cu2+) as probe molecules. Two zeolites were studied: one of them contained mostly Cu+exch., whereas another one contained mostly Cu2+ and Cu+ox. The susceptibility of various forms of Cu for reduction were investigated. IR experiments of CO sorption evidenced that Cu+ox. was more prone for the reduction than Cu+exch. According to NO sorption studies, Cu2+exch. was reduced in the first order before Cu2+ox. Ethanol reduced mostly Cu2+ and, also, some amounts of Cu+. The treatment with oxygen caused the oxidation of Cu+ (both Cu+exch. and Cu+ox.) to Cu2+. The adsorption of NO at 190K produced Cu+(NO)2 dinitrosyls, but heating to room temperature transformed dinitrosyls to mononitrosyls and increased the Cu2+ content.

IR and NMR Studies of the Status of Al and Acid Sites in Desilicated Zeolite Y.

The desilication of zeolite Y (of Si/Al = 31) that was previously dealuminated by steaming and acid treatment was studied. Desilication of zeolites of high Si/Al module in alkali solutions extracts both Si and Al from zeolite crystals, but while Si remains in solution, Al is reinserted into the zeolite grain. The main goal of our study was to follow the status of Al reinserted into zeolite during the desilication procedure, and its role in the formation of acid sites of the Brønsted and Lewis types. The properties of Al were followed by 27Al MAS NMR spectroscopy (for parent samples and zeolites treated either with NaOH or NaOH/tetrabutylammonium hydroxide), whereas the acid sites generated in the final stages were studied by IR spectroscopy with NH3 and CO as probe molecules. In non-desilicated zeolite, most of the Al was in a typically zeolitic tetrahedral coordination, while both NMR and quantitative IR studies of NH3 sorption evidenced that Al that was extracted by desilication and was subsequently reinserted had a tetrahedral coordination similar to amorphous aluminosilicates and showed an ion exchange ability. After the exchange of Na+ to NH4+ and decomposition of NH4+ ions, reinserted Al forms generated protonic sites from which some condensed at higher temperatures producing Lewis acid sites (with stoichiometry typical for zeolites i.e., the condensation of two protonic sites produces one Lewis site) but some other kept their character.

IR Studies of the Cu Ions in Cu-Faujasites.

The properties of Cu ions in dealuminated faujasite-type zeolites (Si/Al = 31) containing 1, 2, and 5 wt.% of Cu were investigated by IR spectroscopy with CO and NO as probe molecules. Cu was introduced by impregnation into zeolites in both protonic (HFAU) and sodium (NaFAU) forms of zeolite. Four kinds of Cu species were found: Cu+exch., Cu+oxide, Cu2+exch. (square, planar, and square pyramidal), and Cu2+oxide (CuO). The proportions between these four kinds of Cu depended on the amount of Cu and on the form of zeolite to which Cu was introduced (HFAU or NaFAU). Zeolites with 1 wt.% of Cu introduced to HFAU (denoted as Cu(1)HFAU) contained only Cu+exch., whereas other forms of Cu were present in zeolites of higher Cu contents. The concentration of Cu+exch. was determined by quantitative IR studies of CO adsorption. According to the IR results, some Cu ions were situated inside hexagonal prisms and/or cuboctahedra, and were inaccessible to adsorbed molecules. IR studies also evidenced that Cu ions in oxide forms-Cu+oxide and Cu2+oxide (CuO)-were better electron donors than Cu in exchange positions (Cu+exch. and Cu2+exch).

Hydroxyl Groups of Exceptionally High Acidity in Desilicated Zeolites Y.

The desilication of dealuminated zeolite Y in NaOH/tetrabutylammonium hydroxide mixtures produces hierarchical zeolite Y containing a micropore system as well as mesopores of significant volume and surface. IR studies evidenced that a new kind of hydroxyls was formed if desilication was realized above 318 K. This new kind of acidic hydroxyls is characterized by IR band at 3600 cm-1 . IR studies showed, that these new hydroxyls showed extremely high acidity. This was evidenced by very high frequency shifts of IR bands of OH interacting with probe molecules: CO and N2 : Δ ν O H · · · C O =411 cm-1 and Δ ν O H · · · N 2 =164 cm-1 , resp. These frequency shift are the highest in all the chemistry of zeolites including very strongly acidic dealuminated mazzite and steamed zeolite USY ( Δ ν O H · · · C O =ca. 380 cm-1 ) indicating that 3600 cm-1 hydroxyls are the most acidic in all the zeolites.

IR and NMR studies of hierarchical material obtained by the treatment of zeolite Y by ammonia solution.

Ammonia treatment of ultrastable zeolite Y has a great impact on its features. XRD showed a partial loss of crystallinity coupled with a loss of long-distance zeolite ordering. However, a typical short-range zeolite ordering, in the light of 29Si NMR studies, was largely preserved. 27Al MAS NMR spectra evidenced that most of Al was located in zeolitic tetrahedral positions, but some of them adopted a distorted configuration. Evolution of zeolites acidity was followed quantitatively by using IR. In particular, such studies revealed the presence of strongly acidic SiOHAl groups. IR studies suggest also heterogeneity of these OH groups. The heterogeneity of SiOHAl groups was a consequence of the less ordered structure of zeolites treated with ammonia solutions. It was also found that the treatment with ammonia solutions yields hierarchical material. The samples revealed promising catalytic properties in the liquid phase isomerization of α-pinene. Zeolites desilicated with ammonia may constitute an inexpensive route yielding viable hierarchical catalysts.