Diagnostic accuracy of portable instrumental devices to measure sleep bruxism: a systematic literature review of polysomnographic studies.

This study systematically reviews the sleep bruxism (SB) literature published in the MEDLINE and Scopus databases to answer the following question: What is the validity of the different portable instrumental devices that have been proposed to measure SB if compared with polysomnographic (PSG) recordings assumed as the gold standard? Four clinical studies on humans, assessing the diagnostic accuracy of portable instrumental approaches (i.e. Bitestrip, electromyography (EMG)-telemetry recordings and Bruxoff) with respect to PSG, were included in the review. Methodological shortcomings were identified by QUADAS-2 quality assessment. Findings showed contrasting results and supported only in part the validity of the described diagnostic devices with respect to PSG. The positive predictive value (PPV) of the Bitestrip device was 59-100%, with a sensitivity of 71-84·2%, whilst EMG-telemetry recordings had an unacceptable rate of false-positive findings (76·9%), counterbalanced by an almost perfect sensitivity (98·8%). The Bruxoff device had the highest accuracy values, showing an excellent agreement with PSG for both manual (area under ROC = 0·98) and automatic scoring (0·96) options as well as for the simultaneous recording of events with respect to PSG (0·89-0·91). It can be concluded that the available information on the validity of portable instrumental diagnostic approaches with respect to PSG recordings is still scarce and not solid enough to support any non-PSG technique's employ as a stand-alone diagnostic method in the research setting, with the possible exception of the Bruxoff device that needs to be further confirmed with future investigations.

Evaluation of Vickers hardness and depth of cure of six composite resins photo-activated with different polymerization modes.

AIM: The current in vitro study evaluated Vickers hardness (VK) and depth of cure (hardness ratio) of six resin composites, polymerized with a light-emitting diode (LED) curing unit by different polymerization modes: Standard 20 s, Standard 40 s, Soft-start 40 s. MATERIALS AND METHODS: SIX RESIN COMPOSITES WERE SELECTED FOR THE PRESENT STUDY: three microhybrid (Esthet.X HD, Amaris, Filtek Silorane), two nanohybrid (Grandio, Ceram.X mono) and one nanofilled (Filtek Supreme XT). The VK of the surface was determined with a microhardness tester using a Vickers diamond indenter and a 200 g load applied for 15 seconds. The mean VK and hardness ratio of the specimens were calculated using the formula: hardness ratio = VK of bottom surface / VK of top surface. RESULTS: For all the materials tested and with all the polymerization modes, hardness ratio was higher than the minimum value indicated in literature in order to consider the bottom surface as adequately cured (0.80). Curing time did not affect hardness ratio values for Filtek Silorane, Grandio and Filtek Supreme XT. CONCLUSION: The effectiveness of cure at the top and bottom surface was not affected by Soft-start polymerization mode.

FEM analysis of different dental root canal-post systems in young permanent teeth.

AIM: Aim of this work was to carry out a comparative evaluation of the structural behaviour of different root canal posts (cylindrical, conical and triple conical) fitted in a second lower bicuspid and subjected to compression and bending test. MATERIALS AND METHODS: This study has been carried out by numerical method of structural analysis of finite elements (FEM, Finite Element Method). Different tridimensional models were obtained by CAT images of an extracted tooth, endodontically treated, filled with guttapercha and triple conical glass post. Images have been elaborated by a software for images (Mimics and Ansys) and CAD (Rhinoceros 3 D). In the models a II Class restoration has been virtually created. In the numerical simulation dental tissues (enamel, dentine and root cement), guttapercha, root canal cement, different posts, different techniques of cementation and crown restoration (composites and adhesive systems) have been considered. RESULTS: Strain distributions in dental tissues, in root canal cement and in posts have been compared. The equivalent tensions and the single components (traction, compression and cut) have been analysed. In all examined posts, the most strained part is resulted the coronal one, even if the total tension, in the different tooth-post analyzed systems, resulted uniformly distributed. A similar behaviour was shown by the root canal cement. CONCLUSIONS: According to the analyzed conditions of bond and load, varying according to the geometry of the considered posts, our results confirm that there is no substantial difference of deformation in posts, root canal cement and treated tooth.

Hemandibular hypoplasia successfully treated with functional appliances: is it truly hemifacial microsomia?

The literature contains a number of case reports on successful orthopedic treatment of hemifacial microsomia (HFM), with surprising changes in the morphology of the condyles. All of these reports regard patients who have substantially no soft tissue involvement but only severe mandibular ramus and condyle deformities. A number of cases with unexpectedly similar phenotypes diagnosed as HFM are described. The authors suggest that it is possible that all of these cases might be misdiagnosed traumatic injuries of the condyle, which present a normal functional matrix and, therefore, with growth and with the help of functional stimulation, tend to grow toward the original symmetry.

Implant repositioning for esthetic reasons: a clinical report.

This article describes the correction of an unesthetic implant position that resulted from unexpected postpubertal growth. Surgical implant repositioning, a technique similar to single-tooth osteotomies, was used. The implant and surrounding bone were mobilized, and a green stick fracture was made on the buccal plate. With pivoting on the buccal plate, the implant was moved to a more palatal position and restored. Although some degree of asymmetry could still be detected, a satisfactory esthetic result was achieved.

Three-dimensional dental arch curvature in human adolescents and adults.

The three-dimensional arrangement of dental cusps and incisal edges in human dentitions has been reported to fit the surface of a sphere (the curve of Monson), with a radius of about 4 inches in adults. The objective of the current study was to compare the three-dimensional curvature of the mandibular dental arch in healthy permanent dentitions of young adults and adolescents. The mandibular casts of 50 adults (aged 19 to 22 years) and 20 adolescents (aged 12 to 14 years) with highly selected sound dentitions that were free from temporomandibular joint problems were obtained. The three coordinates of cusp tips excluding the third molars were digitized with a three-dimensional digitizer, and used to derive a spherical model of the curvature of the occlusal surfaces. From the best interpolating sphere, the radii of the left and right curves of Spee (quasi-sagittal plane) and of molar curve of Wilson (frontal plane) were computed. Mandibular arch size (interdental distances) was also calculated. The occlusal curvature of the mandibular arch was not significantly influenced by sex, although a significant effect of age was found (Student t, P <.005). The radii of the overall sphere, right and left curves of Spee, and curve of Wilson in the molar area were about 101 mm in adults, and about 80 mm in adolescents. Arch size was not influenced by either sex or age. The different curvatures of the occlusal plane in adolescents and adults may be explained by a progressive rotation of the major axis of the teeth moving the occlusal plane toward a more buccal position. These dental movements should be performed in a frontal plane on an anteroposterior axis located next to the dental crown.

Soft-tissue facial morphometry from 6 years to adulthood: a three-dimensional growth study using a new modeling.

A recently introduced three-dimensional computerized system with landmark representation of the soft-tissue facial surface allows noninvasive and fast quantitative study of facial growth. The aims of the present investigation were (1) to quantify growth changes in soft-tissue facial morphology, (2) to evaluate sex differences in growth patterns, and (3) to provide reference data for selected angular and linear measurements that could be of interest for the objective analysis of maxillofacial surgery or orthodontic patients. The three-dimensional coordinates of 22 standardized facial landmarks were automatically collected by automated infrared photogrammetry using the three-dimensional facial morphometry method in a mixed longitudinal and cross-sectional study, in which 2023 examinations were obtained in 1348 healthy nonpatient subjects between 6 years of age and young adulthood. Selected parameters (angles, linear distances, and ratios) were calculated and averaged for age and sex. Male values were compared with female values by means of Student's t test. Within each age group, linear distances were significantly larger in boys than in girls (p < 0.05) with some exceptions coinciding with the earlier female growth spurt, whereas angular measurements did not show a corresponding sexual dimorphism. Linear distances in girls had almost reached adult dimensions in the 12-to-13-year-old age group, whereas in boys a large increase was still to occur. This was most evident in the middle third of the face, where both sexes showed almost the same dimension and amount of growth up to the age of 13, with significant differences afterward, boys being larger than girls. On the contrary, in the lower third of the face, significant differences occurred throughout the whole investigated period, boys being always larger than girls. The male versus female angular comparison reflected the differential timing in attainment of adult proportions. The three-dimensional facial morphometry method allowed the noninvasive evaluation of a large sample of nonpatient subjects, leading to the definition of three-dimensional normative data about facial soft tissues. The method could supplement more invasive radiographic evaluations, allowing frequent examinations of children and adolescents before and during treatment, as well as in the follow-up.

Craniofacial growth: a three-dimensional soft-tissue study from 6 years to adulthood.

Normal facial growth and development was analyzed through indirect anthropometry in a mixed longitudinal and cross-sectional investigation; 2,023 examinations were performed on 1,156 healthy Caucasian children and adolescents between 6 and 17 years of age and on 191 young adults. Three-dimensional coordinates of 22 facial landmarks were collected with the Three-Dimensional Facial Morphometry method by automated infrared photogrammetry. Selected three-dimensional parameters (linear distances, angles, and a ratio), describing facial height, width, depth, and convexity on the horizontal plane, were calculated and averaged for age and sex. Within each age group, most linear distances were significantly larger in males than in females, with some exceptions in the 11 to 12 age group, where female growth velocity showed a spurt. In females of the 14 to 15 age group the face had almost completed growth; in males of the same age group, a large increase was still to occur to attain adult values. The sexual dimorphism of the parameters calculated did not appear in the different parts of the face to the same extent: a large part of male facial preponderance occurred in the lower third of face. From 6 years of age to adulthood, the soft-tissues in the facial lower third increased by about 23% (males) and 17% (females), in the middle third by about 18% (males) and 13% (females), and in the upper third by about 16% (males) and 9% (females). The male vs. female comparisons within each age group suggested a sexual dimorphism in the timing of soft-tissue facial growth, but an overall similar attainment of different adult dimensions.

Facial volume changes during normal human growth and development.

BACKGROUND: To describe normal soft tissue growth and development of the human face through volume changes and to assess the presence of sexual dimorphism. METHODS: Facial landmark identifications (2,023) were performed on 1,347 healthy Caucasian children and adolescents, ages 6-18 yr, and young adults, ages 19-32 yr. Three-dimensional coordinates of 22 facial landmarks were collected by automated infrared photogrammetry. Facial volumes and selected linear distances and ratios were calculated and averaged for age and sex. RESULTS: Whereas in females in the 14-15 age group, the face had almost completed its growth relative to the adult group, in males a large increase was still to occur, in general agreement with previous reports on craniofacial growth, which suggested a strong tendency in males for growth to continue for several years beyond that seen in females. The male vs. female comparison reflected the different growth patterns. On average, within each age group volumes were significantly larger in males than in females, with some exceptions in the 11-12 age group, where female growth velocity showed a spurt. Sexual dimorphism in facial volume did not appear in different parts of the face to the same extent: a large part of male facial volume preponderance occurred in the lower third of the face. CONCLUSIONS: From 6 yr of age to adulthood, facial soft tissues increased their volumes by >40%, with different growth patterns in boys and girls.

Preliminary evaluation of an electromagnetic three-dimensional digitizer in facial anthropometry.

OBJECTIVE: In this investigation, the precision of a commercial three-dimensional digitizer in the detection of facial landmarks in human adults was assessed. METHODS: Fifty landmarks were identified and marked on the faces of five men, on five women, and on a stone cast of the face of one man. For each subject, the three-dimensional coordinates of the landmarks were obtained twice using an electromagnetic three-dimensional digitizer, and the duplicate digitizations were superimposed using common orientations and centers of gravity. Metric differences between homologous landmarks were assessed, and Dahlberg's error was computed. RESULTS: For both men and women, the error was 1.05% of the nasion-midtragion distance, while for the cast, it was 0.9%. When the duplicate digitizations were used to mathematically reconstruct the faces, and several distances, angles, volumes, and surfaces were computed, more than 80% of the measurements had coefficients of variation lower than 1%. CONCLUSIONS: The digitizer can assess the coordinates of facial landmarks with sufficient precision, and reliable measurements can be obtained.

Three-dimensional study of growth and development of the nose.

OBJECTIVE: The aim of this study was to describe normal nasal growth in a large sample of boys and girls from 6 to 14 years of age, to compare nasal development at 14 years of age with its adult dimensions, and to evaluate differences in growth patterns between males and females. DESIGN: Growth and development of the nose were analyzed through the three-dimensional facial morphometry method. One thousand thirteen examinations were performed on 402 children between 6 and 14 years of age and on 101 adults. Three-dimensional coordinates of five nasal landmarks were collected. Eleven parameters including nasal volume and external surface were calculated and averaged for age and sex. RESULTS: Volume, surface, and linear distances were larger in males than in females, with the exception of the 11-to-12 age group, where a sharp female growth spurt was present. In males, the growth spurt was broader, and continued to 13 years of age at a nearly steady rate. Statistically significant gender differences could be found both in the adult group and before the adolescent growth spurt. CONCLUSIONS: Our findings are in general agreement with previous reports on craniofacial growth, which suggested a strong tendency in males for growth to continue for several years beyond that seen in females.

A three-dimensional non-invasive study of head flexion and extension in young non-patient subjects.

Head flexion and extension movements near the natural head position (NHP) were analysed for the location of the mean instantaneous centre of rotation (ICR). Forty-six healthy young adults (30 women and 16 men) with sound dentitions, free from cranio-cervical disorders, performed habitual movements that were automatically detected and measured by an infrared three-dimensional motion analyser. ICR and curvature radius were calculated for each movement and subject. In both extension and flexion, ICR position changed during the motion. The movement was symmetrical in all subjects. No gender or flexion/extension differences were found for both ICR position and relevant curvature radius. On average, ICR relative to NHP soft-tissue nasion was located at about 150% of the soft-tissue nasion-right tragus distance, with an angle of about 220 degrees relative to the true horizontal. Results suggest that head flexion or extension is always performed with a combination of rotation (atlanto-occipital joint) and translation (cervical spine) even in the first degrees of motion. Moreover, NHP at rest seems to be some degree more flexed and anterior than head position during movements. These relative positions and their muscular determinants could also influence mandibular posture at rest and during functional movements.

Soft tissue facial morphology related to headform: a three-dimensional quantitative analysis in childhood.

The object of this investigation was to determine whether children of the same age with different headforms differ in their three-dimensional soft-tissue facial characteristics. The three-dimensional coordinates of 22 standardized facial landmarks were automatically collected in a sample of 70 boys and 71 girls age 11 to 13 years attending a junior high school. From the collected landmarks, several three-dimensional facial angles, linear distances, linear distance ratios, and volumes were calculated. For each subject the cephalic index (maximal head breadth/ maximal head length x 100) was computed and three groups of measurements for each sex were obtained (dolicho-, meso- and brachycephalic). A two-way factorial analysis of variance compared the effects of sex and headform, and the interaction sex x headform. On average, boys had significantly (P < or = 0.05) longer and wider faces than girls, with a larger lower third facial volume relative to middle third facial volume. A significant (P < or = 0.05) effect of headform over facial morphology was found for all angles with a prevalent axial orientation. Conversely, no effect was demonstrated for angles with a sagittal orientation, nor for any other considered parameters. For each sex, the dolichocephalic children had smaller values than the brachycephalic children (i.e., more convex faces in the left-right direction), while the mesocephalic children had intermediate values. No sex x headform interactions were found. Results confirm that a different headform (skull) is associated with a different three-dimensional facial morphology (combined effect of skull and soft tissues), but without size differences.

The relationship between facial 3-D morphometry and the perception of attractiveness in children.

The aim of this investigation was to determine whether attractive children differ in their three-dimensional facial characteristics from nonattractive children of the same age, race, and sex. The facial characteristics of 36 boys and 44 girls aged 8 to 9 years were investigated. Frontal and profile photographs were analyzed independently by 21 judges, and, for each view, four groups were obtained: attractive boys, nonattractive boys, attractive girls, and nonattractive girls. For each child, the three-dimensional coordinates of 16 standardized soft tissue facial landmarks were automatically collected using an infrared system and used to calculate several three-dimensional angles, linear distances, and linear distance ratios. Mean values were computed in the eight groups, and attractive and nonattractive children were compared within sex and view. Most children received a different esthetic evaluation in the separate frontal and profile assessments; concordance in both attractive and nonattractive groups was only 50%. Moreover, three-dimensional facial morphometry was not able to separate attractive and nonattractive children.

Effect of growth and development on cephalometric shapes in orthodontic patients: a Fourier analysis.

The age- and gender-related shape variations of the craniofacial skeleton in skeletal Class I children were quantified using a Fourier analysis on the pre-treatment lateral head films of 122 orthodontic patients (age range 7-15 years), who were subdivided into six groups for sex and age (2-year intervals). Seven landmarks representative of the maxillo-mandibular sagittal and vertical relationship were identified and digitized. The contiguous landmarks were connected by segments, the form was normalized with respect to its orientation and size, and a Fourier analysis of the contour was performed. Mean values of the cosine and sine coefficients of the first six harmonics in the sex and age classes were computed. The size-standardized outlines of the oldest boys were narrower and longer than the outlines of the youngest boys (differences at gonion, menton, sella and nasion). Shape differences between mean plots in girls were negligible. In the youngest patients, girls had a larger size-independent shape in the mandibular region; their shape was narrower (anterior-posterior direction) and longer (vertical direction) than male shape. In the oldest patients, boys had a larger size-independent shape at gonion, and a narrower shape at articulare and pogonion than girls. Size increased from the youngest to the oldest boys; size differences were not conspicuous in girls. Within an age class, male size was always larger than female. Fourier analysis allowed a global evaluation of the cephalometric forms, with separate quantifications of the age- and gender-related differences in size and shape.

Fourier analysis of cephalometric shapes.

Craniofacial growth and development involve both size and shape variations. Shape variations can be assessed independently from size using mathematical methods such as the Fourier series. A method for the reconstruction of outlines starting from selected landmarks and for their Fourier analysis has been developed and applied to analyze the age differences in shape in the tracings of the Bolton standards (lateral view) from 1 to 18 years of age. The size-independent shape of the Bolton standard at 18 years was larger at the chin, at the gonion, and in the anterior cranial base than the shape at 1 year of age. Conversely, the younger shape was larger in the middle part of face, corresponding roughly to the maxillary bone, than the older shape. When standardized for size, growth thus seemed to modify craniofacial shape with progressive lengthening and narrowing. This shape effect was largely overwhelmed by the very evident size increments, and it could be measured only using the proper mathematical methods.

Facial three-dimensional morphometry.

Three-dimensional facial morphometry was investigated in a sample of 40 men and 40 women, with a new noninvasive computerized method. Subjects ranged in age between 19 and 32 years, had sound dentitions, and no craniocervical disorders. For each subject, 16 cutaneous facial landmarks were automatically collected by a system consisting of two infrared camera coupled device (CCD) cameras, real time hardware for the recognition of markers, and software for the three-dimensional reconstruction of landmarks' x, y, z coordinates. From these landmarks, 15 linear and 10 angular measurements, and four linear distance ratios were computed and averaged for sex. For all angular values, both samples showed a narrow variability and no significant gender differences were demonstrated. Conversely, all the linear measurements were significantly higher in men than in women. The highest intersample variability was observed for the measurements of facial height (prevalent vertical dimension), and the lowest for the measurements of facial depth (prevalent horizontal dimension). The proportions of upper and lower face height relative to the anterior face height showed a significant sex difference. Mean values were in good agreement with literature data collected with traditional methods. The described method allowed the direct and noninvasive calculation of three-dimensional linear and angular measurements that would be usefully applied in clinics as a supplement to the classic x-ray cephalometric analyses.

Three-dimensional facial morphometry and conventional cephalometrics: a correlation study.

The purpose of this study was to compare the correlation between three-dimensional soft tissue measurements obtained with three-dimensional digital infrared photogrammetry and two-dimensional data obtained with conventional cephalometry. Facial morphometry was investigated in a group of 20 healthy young men using both systems on each subject. From the lateral radiographs, conventional two-dimensional cephalometric hard and soft tissue data were calculated, while three-dimensional linear and angular soft tissue measurements were computed from the infrared photogrammetry. The correlations between the two sets of measurements were calculated. Three-dimensional soft tissue measurements correlated to cephalometric data primarily contained information useful for esthetic analysis. The soft tissue infrared measurements also allowed evaluation of the general hard tissue situation. Since the soft tissue measurements are calculated with a noninvasive system, they could be computed more frequently during treatment and be used to supplement pretreatment and posttreatment radiographs.

Facial morphometry of television actresses compared with normal women.

PURPOSE: The object of this investigation was to determine whether young women considered as beautiful differ in their three-dimensional facial characteristics from normal women of the same age and race. METHODS: The three-dimensional coordinates of 22 standardized soft-tissue facial landmarks were automatically collected in two groups of women using a noninvasive instrument. The first group consisted of 10 white television actresses selected only on the basis of their soft-tissue facial appearance ("beautiful" group); the second group included 40 healthy, white women selected according to criteria of dentofacial normality ("normal" group). The x, y, and z coordinates of the points collected on each woman were used to calculate several three-dimensional angles, linear distances, linear distance ratios, and facial volumes. RESULTS: The facial morphometric characteristics within the beautiful group were more uniform than within the normal group. On average, the beautiful women had a larger forehead, a larger middle facial third relative to the total face, a wider (left-right dimension) and less deep (anteroposterior dimension) face, a smaller nose, and a less convex face (in both the sagittal and transversal planes) than the normal women. CONCLUSION: The three-dimensional cutaneous facial characteristics of the beautiful women were significantly different from the characteristics of the normal women.

Relative position of porion and tragus in orthodontic patients.

In order to assess the relationship between the hard (porion-orbitale) and soft (tragus-orbitale) tissue Frankfurt planes, the relative positions of porion, orbitale, and tragus were evaluated on cephalometric radiographs. A 5-mm radiopaque disk was fixed on the right tragus of 160 white orthodontic patients (65 males aged 7 to 28 years, and 95 females aged 7 to 36 years), and a pre-treatment lateral cephalometric radiograph was taken. In every film the positions of orbitale, porion, and tragus were digitized, and the linear distances between the points, as well as the position of tragus relative to the skeletal structures, were calculated. The linear distances porion-orbitale and tragus-orbitale progressively increased with age, with a low variability in all age classes. The linear distances were always larger in the males than in the females. The tragus was always lower and more anterior than the porion, with vertical distances ranging from 1.2 to 19.8 mm. When the porion-tragus distance was expressed as a percentage of the porion-orbitale distance, the variability decreased. In the age classes, mean percentage horizontal projections from porion ranged from 18 to 23% of the porion-orbitale distance, mean percentage vertical projections ranged from 8 to 15%. Unfortunately, sample variability was large, and, in a single patient, the position of tragus relative to the skeletal structures could be predicted only with a large approximation.