The use of methylene blue to control the tumor oxygenation level.

BACKGROUND: Hypoxia is a characteristic feature of many tumors. It promotes tumor proliferation, metastasis, and invasion and can reduce the effectiveness of many types of cancer treatment. OBJECTIVE: The aim of this study was to investigate the pharmacokinetics of methylene blue (MB) and its impact on the tumor oxygenation level at mouse Lewis lung carcinoma (LLC) model using spectroscopic methods. APPROACH: The pharmacokinetics of MB were studied qualitatively and quantitatively using video fluorescence imaging and fluorescence spectroscopy. The degree of hemoglobin oxygenation in vivo was examined by calculating hemoglobin optical absorption from the measured diffuse reflectance spectra. The distribution of MB fluorescence and the lifetime of NADH were analyzed using laser scanning microscopy and fluorescence lifetime imaging microscopy (FLIM) to assess cellular metabolism. RESULTS: After intravenous administration of MB at 10-20 mg/kg, it quickly transitioned in the tumor to a colorless leucomethylene blue, with maximum accumulation in the tumor occurring after 5-10 min. A concentration of 10 mg/kg resulted in a relative increase of the tumor oxygenation level for small tumors (volume 50-75 mm3) and normal tissue 120 min after the introduction of MB. A shift in tumor metabolism towards oxidative phosphorylation (according to the lifetime of the NADH coenzyme) was measured using FLIM method after intravenous administration of 10 mg/kg of MB. Intravenous administration of MB at 20 mg/kg results in a long-term decrease in oxygenation, which persisted for at least 120 min after the administration and did not return to its initial level. CONCLUSIONS: Administration of MB at 10 mg/kg shown to increase tumor oxygenation level, potentially leading to more effective antitumor therapy. However, at higher doses (20 mg/kg), MB may cause long-term decrease in oxygenation.

Theranostic Properties of Crystalline Aluminum Phthalocyanine Nanoparticles as a Photosensitizer.

The study of phthalocyanines, known photosensitizers, for biomedical applications has been of high research interest for several decades. Of specific interest, nanophotosensitizers are crystalline aluminum phthalocyanine nanoparticles (AlPc NPs). In crystalline form, they are water-insoluble and atoxic, but upon contact with tumors, immune cells, or pathogenic microflora, they change their spectroscopic properties (acquire the ability to fluoresce and become phototoxic), which makes them upcoming agents for selective phototheranostics. Aqueous colloids of crystalline AlPc NPs with a hydrodynamic size of 104 ± 54 nm were obtained using ultrasonic dispersal and centrifugation. Intracellular accumulation and localization of AlPc were studied on HeLa and THP-1 cell cultures and macrophages (M0, M1, M2) by fluorescence microscopy. Crystallinity was assessed by XRD spectroscopy. Time-resolved spectroscopy was used to obtain characteristic fluorescence kinetics of AlPc NPs upon interaction with cell cultures. The photodynamic efficiency and fluorescence quantum yield of AlPc NPs in HeLa and THP-1 cells were evaluated. After entering the cells, AlPc NPs localized in lysosomes and fluorescence corresponding to individual AlPc molecules were observed, as well as destruction of lysosomes and a rapid decrease in fluorescence intensity during photodynamic action. The photodynamic efficiency of AlPc NPs in THP-1 cells was almost 1.8-fold that of the molecular form of AlPc (Photosens). A new mechanism for the occurrence of fluorescence and phototoxicity of AlPc NPs in interaction with cells is proposed.

Study of synthesis temperature effect onß-NaGdF4: Yb3+, Er3+ upconversion luminescence efficiency and decay time using maximum entropy method.

Upconversion materials have several advantages for many applications due to their great potential in converting infrared light to visible. For practical use, it is necessary to achieve high intensity of UC luminescence, so the studies of the optimal synthesis parameters for upconversion nanoparticles are still going on. In the present work, we analyzed the synthesis temperature effect on the efficiency and luminescence decay ofß-NaGd0.78Yb0.20Er0.02F4(15-25 nm) upconversion nanoparticles with hexagonal crystal structure synthesized by anhydrous solvothermal technique. The synthesis temperature was varied in the 290 °C-320 °C range. The synthesis temperature was shown to have a significant influence on the upconversion luminescence efficiency and decay time. The coherent scattering domain linearly depended on the synthesis temperature and was in the range 13.1-22.3 nm, while the efficiency of the upconversion luminescence increases exponentially from 0.02 to 0.10% under 1 W cm-2excitation. For a fundamental analysis of the reasons for the upconversion luminescence intensity dependence on the synthesis temperature, it was proposed to use the maximum entropy method for luminescence decay kinetics processing. This method does not require a preliminary setting of the number of exponents and, due to this, makes it possible to estimate additional components in the luminescence decay kinetics, which are attributed to different populations of rare-earth ions in different conditions. Two components in the green luminescence and one component in the red luminescence decay kinetics were revealed for nanoparticles prepared at 290 °C-300 °C. An intense short and a weak long component in green luminescence decay kinetics could be associated with two different populations of ions in the surface quenching layer and the crystal core volume. With an increase in the synthesis temperature, the second component disappears, and the decay time increases due to an increase in the number of ions in the crystal core volume and a more uniform distribution of dopants.

Temperature Sensing in the Short-Wave Infrared Spectral Region Using Core-Shell NaGdF4:Yb3+, Ho3+, Er3+@NaYF4 Nanothermometers.

The short-wave infrared region (SWIR) is promising for deep-tissue visualization and temperature sensing due to higher penetration depth and reduced scattering of radiation. However, the strong quenching of luminescence in biological media and low thermal sensitivity of nanothermometers in this region are major drawbacks that limit their practical application. Nanoparticles doped with rare-earth ions are widely used as thermal sensors operating in the SWIR region through the luminescence intensity ratio (LIR) approach. In this study, the effect of the shell on the sensitivity of temperature determination using NaGdF4 nanoparticles doped with rare-earth ions (REI) Yb3+, Ho3+, and Er3+ coated with an inert NaYF4 shell was investigated. We found that coating the nanoparticles with a shell significantly increases the intensity of luminescence in the SWIR range, prevents water from quenching luminescence, and decreases the temperature of laser-induced heating. Thermometry in the SWIR spectral region was demonstrated using synthesized nanoparticles in dry powder and in water. The core-shell nanoparticles obtained had intense luminescence and made it possible to determine temperatures in the range of 20-40 °C. The relative thermal sensitivity of core-shell NPs was 0.68% °C-1 in water and 4.2% °C-1 in dry powder.

Optimization of upconversion luminescence excitation mode for deeper in vivo bioimaging without contrast loss or overheating.

Upconversion nanoparticles have attracted considerable attention as luminescent markers for bioimaging and sensing due to their capability to convert near-infrared (NIR) excitation into visible or NIR luminescence. However, the wavelength of about 970 nm is commonly used for the upconversion luminescence excitation, where the strong absorption of water is observed, which can lead to laser-induced overheating effects. One of the strategies for avoiding such laser-induced heating involves shifting the excitation into shorter wavelengths region. However, the influence of wavelength change on luminescent images quality has not been investigated yet. In this work, we compare wavelengths of 920, 940 and 970 nm for upconversion luminescence excitation in the thickness of biological tissues in terms of detected signal intensity and obtained image quality (contrast and signal-to-background ratio). Studies on biological tissue phantoms with various scattering and absorbing properties were performed to analyze the influence of optical parameters on the depth and contrast of the images obtained under 920-970 nm excitation. It was shown that at the same power the excitation wavelength shift reduces the detected signal intensity and the resulting image contrast. Visualization of biological tissue samples using shorter excitation wavelengths 920 and 940 nm also reduces signal-to-background ratio (S/B) of the obtained images. The S/B of the obtained images amounted to 2, 6 and 8 for 920, 940 and 970 nm, respectively. It was demonstrated that pulse-periodic excitation mode is preferable for obtaining high quality luminescent images of biological tissues deep layers and minimize overheating. Short pulse durations (duty cycle 20%) don't result in heating even for 1 W cm-2 pumping power density and allow obtaining high luminescence intensity, which provides good images quality.

Upconversion microparticles as time-resolved luminescent probes for multiphoton microscopy: desired signal extraction from the streaking effect.

The great interest in upconversion nanoparticles exists due to their high efficiency under multiphoton excitation. However, when these particles are used in scanning microscopy, the upconversion luminescence causes a streaking effect due to the long lifetime. This article describes a method of upconversion microparticle luminescence lifetime determination with help of modified Lucy­Richardson deconvolution of laser scanning microscope (LSM) image obtained under near-IR excitation using nondescanned detectors. Determination of the upconversion luminescence intensity and the decay time of separate microparticles was done by intensity profile along the image fast scan axis approximation. We studied upconversion submicroparticles based on fluoride hosts doped with Yb3+-Er3+ and Yb3+-Tm3+ rare earth ion pairs, and the characteristic decay times were 0.1 to 1.5 ms. We also compared the results of LSM measurements with the photon counting method results; the spread of values was about 13% and was associated with the approximation error. Data obtained from live cells showed the possibility of distinguishing the position of upconversion submicroparticles inside and outside the cells by the difference of their lifetime. The proposed technique allows using the upconversion microparticles without shells as probes for the presence of OH? ions and CO2 molecules.