Giant, Voltage Tuned, Quality Factors of Single Wall Carbon Nanotubes and Graphene at Room Temperature.

Mastering dissipation in graphene-based nanostructures is still the major challenge in most fundamental and technological exploitations of these ultimate mechanical nanoresonators. Although high quality factors have been measured for carbon nanotubes (>106) and graphene (>105) at cryogenic temperatures, room-temperature values are orders of magnitude lower (≃102). We present here a controlled quality factor increase of up to ×103 for these basic carbon nanostructures when externally stressed like a guitar string. Quantitative agreement is found with theory attributing this decrease in dissipation to the decrease in viscoelastic losses inside the material, an effect enhanced by tunable "soft clamping". Quality factors exceeding 25 000 for SWCNTs and 5000 for graphene were obtained on several samples, reaching the limits of the graphene material itself. The combination of ultralow size and mass with high quality factors opens new perspectives for atomically localized force sensing and quantum computing as the coherence time exceeds state-of-the-art cryogenic devices.

Biaxial Strain Transfer in Supported Graphene.

Understanding the mechanism and limits of strain transfer between supported 2D systems and their substrate is a most needed step toward the development of strain engineering at the nanoscale. This includes applications in straintronics, nanoelectromechanical devices, or new nanocomposites. Here, we have studied the limits of biaxial compressive strain transfer among SiO2, diamond, and sapphire substrates and graphene. Using high pressure-which allows maximizing the adhesion between graphene and the substrate on which it is deposited-we show that the relevant parameter governing the graphene mechanical response is not the applied pressure but rather the strain that is transmitted from the substrate. Under these experimental conditions, we also show the existence of a critical biaxial stress beyond which strain transfer become partial and introduce a parameter, α, to characterize strain transfer efficiency. The critical stress and α appear to be dependent on the nature of the substrate. Under ideal biaxial strain transfer conditions, the phonon Raman G-band dependence with strain appears to be linear with a slope of -60 ± 3 cm-1/% down to biaxial strains of -0.9%. This evolution appears to be general for both biaxial compression and tension for different experimental setups, at least in the biaxial strain range -0.9% < ε < 1.8%, thus providing a criterion to validate total biaxial strain transfer hypotheses. These results invite us to cast a new look at mechanical strain experiments on deposited graphene as well as to other 2D layered materials.

Bidimensional nano-optomechanics and topological backaction in a non-conservative radiation force field.

Optomechanics, which explores the fundamental coupling between light and mechanical motion, has made important advances in manipulating macroscopic mechanical oscillators down to the quantum level. However, dynamical effects related to the vectorial nature of the optomechanical interaction remain to be investigated. Here we study a nanowire with subwavelength dimensions coupled strongly to a tightly focused beam of light, enabling an ultrasensitive readout of the nanoresonator dynamics. We determine experimentally the vectorial structure of the optomechanical interaction and demonstrate that a bidimensional dynamical backaction governs the nanowire dynamics. Moreover, the spatial topology of the optomechanical interaction is responsible for novel canonical signatures of strong coupling between mechanical modes, which leads to a topological instability that underlies the non-conservative nature of the optomechanical interaction. These results have a universal character and illustrate the increased sensitivity of nanomechanical devices towards spatially varying interactions, opening fundamental perspectives in nanomechanics, optomechanics, ultrasensitive scanning force microscopy and nano-optics.

Ultrahigh interlayer friction in multiwalled boron nitride nanotubes.

Friction at the nanoscale has revealed a wealth of behaviours that depart strongly from the long-standing macroscopic laws of Amontons-Coulomb. Here, by using a 'Christmas cracker'-type of system in which a multiwalled nanotube is torn apart between a quartz-tuning-fork-based atomic force microscope (TF-AFM) and a nanomanipulator, we compare the mechanical response of multiwalled carbon nanotubes (CNTs) and multiwalled boron nitride nanotubes (BNNTs) during the fracture and telescopic sliding of the layers. We found that the interlayer friction for insulating BNNTs results in ultrahigh viscous-like dissipation that is proportional to the contact area, whereas for the semimetallic CNTs the sliding friction vanishes within experimental uncertainty. We ascribe this difference to the ionic character of the BN, which allows charge localization. The interlayer viscous friction of BNNTs suggests that BNNT membranes could serve as extremely efficient shock-absorbing surfaces.

Ultra low power consumption for self-oscillating nanoelectromechanical systems constructed by contacting two nanowires.

We report here the observation of a new self-oscillation mechanism in nanoelectromechanical systems (NEMS). A highly resistive nanowire was positioned to form a point-contact at a chosen vibration node of a silicon carbide nanowire resonator. Spontaneous and robust mechanical oscillations arise when a sufficient DC voltage is applied between the two nanowires. An original model predicting the threshold voltage is used to estimate the piezoresistivity of the point-contact in agreement with the observations. The measured input power is in the pW-range which is the lowest reported value for such systems. The simplicity of the contacting procedure and the low power consumption open a new route for integrable and low-loss self-excited NEMS devices.

Electron fluctuation induced resonance broadening in nano electromechanical systems: the origin of shear force in vacuum.

This article presents a study of the poorly understood "shear-force" used in an important class of near-field instruments that use mechanical resonance feedback detection. In the case of a metallic probe near a metallic surface in vacuum, we show that in the 10-60 nm range there is no such a thing as a shear-force in the sense of the nonconservative friction force. Fluctuations of the oscillator resonance frequency, likely induced by local charge variations, could account for the reported effects in the literature without introducing a dissipative force.

Field evaporation tailoring of nanotubes and nanowires.

We explore here the use of field evaporation in a transmission electron microscope for controlled apex modification, opening, and shortening of various types of individual nanotubes and nanowires. The technique works well for conducting carbon nanotubes but also for large bandgap silicon carbide nanowires and insulating boron nitride nanotubes. Since the length reduction does not affect the diameter of the object, we can thus compare mechanical properties at a given diameter for different lengths or, conversely, precisely tune the mechanical resonance frequencies. Opening the nanotubes also creates perspectives for their use as nano-capillaries.

NEXAFS study of multi-walled carbon nanotubes functionalization with sulfonated poly(ether ether ketone) chains.

Functionalization of multi-walled carbon nanotubes (MWNTs) surface by sulfonated poly (ether ether ketone) SPEEK chains using a direct attachment reaction was investigated. A two step method was performed. MWNTs were oxidized by a nitric acid treatment to generate carboxyl groups on their surface. The grafting reaction of sulfonated groups of SPEEK with carboxyl groups present on the surface of oxidized MWNTs readily proceeds by using hexane diamine as an interlinking molecule. Transmission electron microscopy (TEM) shows that tubes are wrapped by polymer chains. Near edge X-ray absorption fine structure spectroscopy (NEXAFS) at the C K-edge, O K-edge, and N K-edge and X-ray photoelectron spectroscopy (XPS) were used to give evidence of covalent functionalization of MWNTs by SPEEK macromolecules.

Spectroscopic study of nitrogen doping of multi-walled carbon nanotubes.

Combined spatially resolved electron-energy loss spectroscopy (EELS) and high resolution near-edge X-ray absorption fine structure (NEXAFS) spectroscopy have been used to investigate the nitrogen doping of multi-walled carbon nanotubes (N-MWNT). EELS indicates that most of the tubes are nitrogen-doped. NEXAFS spectroscopy reveals pyridine-like and nitrile N structures. High resolution NEXAFS experiments show that the main nitrogen concentration originates from a high amount of molecular N2 encapsulated into only a small quantity of tubes.

Electrostatics of individual single-walled carbon nanotubes investigated by electrostatic force microscopy.

We report an experimental study of static charge distribution in individual single-walled carbon nanotubes grown on a Si+115 nm SiO2 substrate. From these experiments, we conclude that charges are distributed uniformly along the nanotubes. We demonstrate that electrostatic force microscopy can accurately measure the amount of charges per unit length. We found that this amount is diameter dependent and in the range of 1 electron per nanometer for a 2.5 nm nanotube at a potential of -3.5 V.

Nanomeasurements in Transmission Electron Microscopy.

Nanomaterials have attracted a great deal of research interest recently. The small size of nanostructures constrains the applications of well-established testing and measurement techniques, thus new methods and approaches must be developed for quantitative measurement of the properties of individual nanostructures. This article reports our progress in using in situ transmission electron microscopy to measure the electrical, mechanical, and field-emission properties of individual carbon nanotubes whose microstructure is well-characterized. The bending modulus of a single carbon nanotube has been measured by an electric field-induced resonance effect. A nanobalance technique is demonstrated that can be applied to measure the mass of a tiny particle as light as 22 fg (1 fg = 10(-15) g), the smallest balance in the world. Quantum conductance was observed in defect-free nanotubes, which led to the transport of a superhigh current density at room temperature without heat dissipation. Finally, the field-emission properties of a single carbon nanotube are observed, and the field-induced structural damage is reported.

Electrostatic deflections and electromechanical resonances of carbon nanotubes

Static and dynamic mechanical deflections were electrically induced in cantilevered, multiwalled carbon nanotubes in a transmission electron microscope. The nanotubes were resonantly excited at the fundamental frequency and higher harmonics as revealed by their deflected contours, which correspond closely to those determined for cantilevered elastic beams. The elastic bending modulus as a function of diameter was found to decrease sharply (from about 1 to 0.1 terapascals) with increasing diameter (from 8 to 40 nanometers), which indicates a crossover from a uniform elastic mode to an elastic mode that involves wavelike distortions in the nanotube. The quality factors of the resonances are on the order of 500. The methods developed here have been applied to a nanobalance for nanoscopic particles and also to a Kelvin probe based on nanotubes.

Carbon nanotube quantum resistors

The conductance of multiwalled carbon nanotubes (MWNTs) was found to be quantized. The experimental method involved measuring the conductance of nanotubes by replacing the tip of a scanning probe microscope with a nanotube fiber, which could be lowered into a liquid metal to establish a gentle electrical contact with a nanotube at the tip of the fiber. The conductance of arc-produced MWNTs is one unit of the conductance quantum G0 = 2e2/h = (12.9 kilohms)-1. The nanotubes conduct current ballistically and do not dissipate heat. The nanotubes, which are typically 15 nanometers wide and 4 micrometers long, are several orders of magnitude greater in size and stability than other typical room-temperature quantum conductors. Extremely high stable current densities, J > 10(7) amperes per square centimeter, have been attained.