RESUMO
This paper deals with the ability of electrocoagulation (EC) to remove simultaneously COD and chromium from a real chrome tanning wastewater in a batch stirred electro-coagulation cell provided with two aluminium-based electrodes (aluminium/copper/magnesium alloy and pure aluminium). Effects of operating time, current density and initial concentration of Cr(III) and COD have been investigated. The concentrations of pollutants have been successfully reduced to environmentally acceptable levels even if the concentrated effluent requires a long time of treatment of around 6h with a 400A/m(2) current density. The aluminium alloy was found to be more efficient than pure aluminium for removal of COD and chromium. Dilution of the waste has been tested for treatment: high abatement levels could be obtained with shorter time of treatment and lower current densities. Energy consumption of the electrocoagulation process was also discussed. The dilution by half of the concentrated waste leads to a higher abatement performance of both COD and chromium with the best energy efficiency.
RESUMO
In order to characterize the pollution discharged into the Moselle River and some of its tributaries, spectroscopic techniques, namely UV-vis spectroscopy and synchronous fluorescence spectroscopy, have been combined. UV-visible spectra were analysed using the maximum of the second derivative at 225 nm (related to nitrates), the SUVA254 and E2/E3 indices (related to the nature of organic matter). Synchronous fluorescence spectra (delta lambda = 50 nm) presented different shapes depending upon the type of pollution. The pollution results from anthropogenic activities: untreated domestic sewage due to misconnections in a periurban river, effluent from urban WWTPS, agricultural runoff (nitrates) in several streams, discharge from a paper mill (humic-like substances due to wood processing) and from steel mills (PAHs).
