Validation of the hen's egg test for micronucleus induction (HET-MN): detailed protocol including scoring atlas, historical control data and statistical analysis.

A validation exercise of the hen's egg test for micronucleus induction was finalised with a very good predictivity based on the analysis of micronuclei in peripheral erythrocytes of fertilised chicken eggs (Reisinger et al. The hen's egg test for micronucleus-induction (HET-MN): validation data set. Mutagenesis, this issue). For transparency reasons this complementary publication provides further details on the assay especially as it was the first validation study in the field of genotoxicity testing involving the use of chicken eggs. Thus, the experimental protocol is described in detail and is complemented by a scoring atlas for microscopic analysis in blood cells. In addition, general characteristics of the test system, which is able to mirror the systemic availability of test compounds, are delineated: the test compound passes the egg membrane and is taken up by the blood vessels of the underlying chorioallantoic membrane. Subsequently, it is distributed by the circulating blood, metabolised by the developing liver and the yolk sac membrane and finally excreted into the allantois, a bladder equivalent. In specific, the suitability of the test system for genotoxicity testing is shown by, inter alia, a low background DNA damage in a comprehensive historical control database. In addition, the state-of-the-art statistical method used to evaluate obtained data is delineated. It combines laboratory-specific effect threshold with the Umbrella-Williams test, a statistical model also of interest for other genotoxicity test methods.

The hen's egg test for micronucleus induction (HET-MN): validation data set.

The classical in vitro genotoxicity test battery is known to be sensitive for indicating genotoxicity. However, a high rate of 'misleading positives' was reported when three assays were combined as required by several legislations. Despite the recent optimisations of the standard in vitro tests, two gaps could hardly be addressed with assays based on 2D monolayer cell cultures: the route of exposure and a relevant intrinsic metabolic capacity to transform pro-mutagens into reactive metabolites. Following these considerations, fertilised chicken eggs have been introduced into genotoxicity testing and were combined with a classical read-out parameter, the micronucleus frequency in circulating erythrocytes, to develop the hen's egg test for micronucleus induction (HET-MN). As a major advantage, the test mirrors the systemic availability of compounds after oral exposure by reflecting certain steps of Absorption, Distribution, Metabolism, Excretion (ADME) without being considered as an animal experiment. The assay is supposed to add to a toolbox of assays to follow up on positive findings from initial testing with classical in vitro assays. We here report on a validation exercise, in which >30 chemicals were tested double-blinded in three laboratories. The specificity and sensitivity of the HET-MN were calculated to be 98 and 84%, respectively, corresponding to an overall accuracy of 91%. A detailed protocol, which includes a picture atlas detailing the cell and micronuclei analysis, is published in parallel (Maul et al. Validation of the hen's egg test for micronucleus induction (HET-MN): detailed protocol including scoring atlas, historical control data and statistical analysis).

Hazard assessment of air pollutants: The transforming ability of complex pollutant mixtures in the Bhas 42 cell model.

The use of in vitro alternative methods is a promising approach to characterize the hazardous properties of environmental chemical mixtures, including urban airborne particulate matter (PM). The aim of this study was to examine seasonal differences in the toxic and transforming potential of PM samples, by using the in vitro cell transformation assay in Bhas 42 cells for the prediction of potential carcinogenic effects. Bhas 42 cells are already initiated, and the v-Ha-ras transfection, together with genetic modification following the immortalization process, makes them a valuable model to study the late steps of cellular transformation leading to the acquisition of the malignant phenotype. Exposure to organic extracts of PM1 and PM2.5 induced dose-related effects. The transforming and cytotoxic properties are related to the amount of PM collected during the sampling campaign and associated with the concentrations of polycyclic aromatic hydrocarbons (PAHs) in the samples. All the samples induced cell transformation following prolonged exposure of 2 weeks. Our results support the utility of the in vitro top-down approach to characterise the toxicity of real mixtures, thereby supporting regulators in the decision-making process. The results also identify the need for appropriate assay selection within the in vitro testing strategy to address the complexity of the final adverse outcomes.

From in vivo to in vitro: The medical device testing paradigm shift.

Amid growing efforts to advance the replacement, reduction, and refinement of the use of animals in research, there is a growing recognition that in vitro testing of medical devices can be more effective, both in terms of cost and time, and also more reliable than in vivo testing. Although the technological landscape has evolved rapidly in support of these concepts, regulatory acceptance of alternative testing methods has not kept pace. Despite the acceptance by regulators of some in vitro tests (cytotoxicity, gene toxicity, and some hemocompatibility assays), many toxicity tests still rely on animals (irritation, sensitization, acute toxicity, reproductive/developmental toxicity), even where other industrial sectors have already abandoned them. Bringing about change will require a paradigm shift in current approaches to testing - and a concerted effort to generate better data on risks to human health from exposure to leachable chemicals from medical devices, and to boost confidence in the use of alternative methods to test devices. To help advance these ideas, stir debate about best practices, and coalesce around a roadmap forward, the JHU-Center for Alternatives to Animal Testing (CAAT) hosted a symposium believed to be the first gathering dedicated to the topic of in vitro testing of medical devices. Industry representatives, academics, and regulators in attendance presented evidence to support the unique strengths and challenges associated with the approaches currently in use as well as new methods under development, and drew next steps to push the field forward from their presentations and discussion.

Fate of micronuclei and micronucleated cells.

The present review describes available evidence about the fate of micronuclei and micronucleated cells. Micronuclei are small, extranuclear chromatin bodies surrounded by a nuclear envelope. The mechanisms underlying the formation of micronuclei are well understood but not much is known about the potential fate of micronuclei and micronucleated cells. Many studies with different experimental approaches addressed the various aspects of the post-mitotic fate of micronuclei and micronucleated cells. These studies are reviewed here considering four basic possibilities for potential fates of micronuclei: degradation of the micronucleus or the micronucleated cell, reincorporation into the main nucleus, extrusion from the cell, and persistence in the cytoplasm. Two additional fates need to be considered: premature chromosome condensation/chromothripsis and the elimination of micronucleated cells by apoptosis, yielding six potential fates for micronuclei and/or micronucleated cells. The available data is still limited, but it can be concluded that degradation and extrusion of micronuclei might occur in rare cases under specific conditions, reincorporation during the next mitosis occurs more frequently, and the majority of the micronuclei persist without alteration at least until the next mitosis, possibly much longer. Overall, the consequences of micronucleus formation on the cellular level are still far from clear, but they should be investigated further because micronucleus formation may contribute to the initial and later steps of malignant cell transformation, by causing gain or loss of genetic material in the daughter cells and by the possibility of massive chromosome rearrangement in chromosomes entrapped within a micronucleus by the mechanisms of chromothripsis and chromoanagenesis.

Implementation of New Test Methods into Practical Testing.

New toxicology test methods, especially those using in vitro methods, are continually being developed. Some are used by industry for screening purposes; others are eventually validated for regulatory use. However, for a new test method to be firmly adopted by industry it must be readily available, generally through an in-house industry laboratory, an academic laboratory, or a contract research organization. Regardless of the type of laboratory which intends to implement the test method, certain steps must be taken to ascertain that the method that is put into place is reproducible and performs identically to the test method that was published or has undergone validation. This involves developing protocols and standard operating procedures, training staff, developing historic positive and negative control data, establishing acceptable performance with proficiency chemicals, and addressing all the safety concerns that may accompany the assay. From experience within a contract research laboratory, we provide guidance on how to most efficiently accomplish these tasks.

State of the art on alternative methods to animal testing from an industrial point of view: ready for regulation?

Despite changing attitudes towards animal testing and current legislation to protect experimental animals, the rate of animal experiments seems to have changed little in recent years. On May 15-16, 2013, the In Vitro Testing Industrial Platform (IVTIP) held an open meeting to discuss the state of the art in alternative methods, how companies have, can, and will need to adapt and what drives and hinders regulatory acceptance and use. Several key messages arose from the meeting. First, industry and regulatory bodies should not wait for complete suites of alternative tests to become available, but should begin working with methods available right now (e.g., mining of existing animal data to direct future studies, implementation of alternative tests wherever scientifically valid rather than continuing to rely on animal tests) in non-animal and animal integrated strategies to reduce the numbers of animals tested. Sharing of information (communication), harmonization and standardization (coordination), commitment and collaboration are all required to improve the quality and speed of validation, acceptance, and implementation of tests. Finally, we consider how alternative methods can be used in research and development before formal implementation in regulations. Here we present the conclusions on what can be done already and suggest some solutions and strategies for the future.

Statistical analysis of the hen's egg test for micronucleus induction (HET-MN assay).

The HET-MN assay (hen's egg test for micronucleus induction) is different from other in vitro genotoxicity assays in that it includes toxicologically important features such as absorption, distribution, metabolic activation, and excretion of the test compound. As a promising follow-up to complement existing in vitro test batteries for genotoxicity, the HET-MN is currently undergoing a formal validation. To optimize the validation, the present study describes a critical analysis of previously obtained HET-MN data to check the experimental design and to identify the most appropriate statistical procedure to evaluate treatment effects. Six statistical challenges (I-VI) of general relevance were identified, and remedies were provided which can be transferred to similarly designed test methods: a Williams-type trend test is proposed for overdispersed counts (II) by means of a square-root transformation which is robust for small sample sizes (I), variance heterogeneity (III), and possible downturn effects at high doses (IV). Due to near-to-zero or even zero-count data occurring in the negative control (V), a conditional comparison of the treatment groups against the mean of the historical controls (VI) instead of the concurrent control was proposed, which is in accordance with US-FDA recommendations. For the modified Williams-type tests, the power can be estimated depending on the magnitude and shape of the trend, the number of dose groups, and the magnitude of the MN counts in the negative control. The experimental design used previously (i.e. six eggs per dose group, scoring of 1000 cells per egg) was confirmed. The proposed approaches are easily available in the statistical computing environment R, and the corresponding R-codes are provided.

Cigarette smoke-induced morphological transformation of Bhas 42 cells in vitro.

In vitro cell transformation assays detect transformed cells that have acquired the distinct characteristics of malignant cells and thus model one stage of in vivo carcinogenesis. These assays have been proposed as surrogate models for predicting the non-genotoxic carcinogenic potential of chemicals. The Bhas 42 cell transformation assay, a short-term assay that uses v-Ha-ras-transfected Balb/c 3T3 cells, can detect the tumour promoter-like activities of chemicals, but has not previously been used with cigarette smoke. The particulate phase of cigarette smoke (total particulate matter [TPM]) is known to induce tumours in vivo in the mouse skin painting assay. Therefore, we investigated the ability of this Bhas cell assay to form morphologically transformed foci in vitro when repeatedly challenged with TPM from a standard research cigarette. TPM induced a dose-dependent increase in Type III foci, and a significant increase (up to 20-fold) in focus formation at moderately toxic concentrations between 5 and 60µg TPM/ml, with a peak at 20µg/ml. Three batches of TPM were tested in three independent experiments. Precision (repeatability and reproducibility) was calculated by using 0, 5, 10, and 20µg TPM/ml. Repeatability and reproducibility, expressed as the relative standard deviation obtained from the normalised slopes of the dose-response curves, were 17.2% and 19.6%, respectively; the slopes were 0.7402 ± 0.1247, 0.9347 ± 0.1316, and 0.8772 ± 0.1767 (increase factor∗ml/mg TPM; mean ± SD) ; and the goodness of fit (r2) of the mean slopes, each derived from n = 6 repeats, was 0.9449, 0.8198, and 0.8344, respectively. This in vitro assay with Bhas 42 cells, which are regarded as already initiated in the two-stage paradigm of carcinogenesis (initiation and promotion), is able to detect cell transformation induced by cigarette smoke in a dose-dependent manner with a high sensitivity and good precision. Because this assay is fast and yields reliable results, it may be useful in product assessment, as well as for further investigation of the non-genotoxic carcinogenic activity of tobacco smoke-related test substances.

Photo catalogue for the classification of foci in the BALB/c 3T3 cell transformation assay.

This catalogue is a display of focus photos representative of the BALB/c 3T3 cell transformation assay (CTA). It is intended as a visual aid for the identification and the scoring of foci in the conduct of the assay. A proper training from experienced personnel together with the protocol reported in this issue and the present photo catalogue will support method transfer and consistency in the assay results.

Prevalidation study of the Syrian hamster embryo (SHE) cell transformation assay at pH 7.0 for assessment of carcinogenic potential of chemicals.

The European Centre for the Validation of Alternative Methods (ECVAM) has organised an interlaboratory prevalidation study on the Syrian hamster embryo (SHE) cell transformation assay (CTA) at pH 7.0 for the detection of rodent carcinogens. The SHE CTA at pH 7.0 has been evaluated for its within-laboratory reproducibility, transferability and between-laboratory reproducibility. Four laboratories using the same basic protocol with minor modifications participated in this study and tested a series of six coded-chemicals: four rodent carcinogens (benzo(a)pyrene, 3-methylcholanthrene, 2,4-diaminotoluene and o-toluidine HCl) and two non-carcinogens (anthracene and phthalic anhydride). All the laboratories found the expected results with coded chemicals except for phthalic anhydride which resulted in a different call in only one laboratory. Based on the outcome of this study, it can be concluded that a standardised protocol is available that should be the basis for future use. This protocol and the assay system itself are transferable between laboratories and the SHE CTA at pH 7.0 is reproducible within- and between-laboratories.

Photo catalogue for the classification of cell colonies in the Syrian hamster embryo (SHE) cell transformation assay at pH 6.7.

This catalogue is a display of Syrian hamster embryo (SHE) cell colony photos representative of the cell transformation assay (CTA) carried out at pH 6.7. It is intended as a visual aid for the identification and the scoring of cell colonies in the conduct of the assay. A proper training from experienced personnel together with the protocol reported in this issue and the present photo catalogue will support method transfer and consistency in the assay results.

Recommended protocol for the BALB/c 3T3 cell transformation assay.

The present protocol has been developed for the BALB/c 3T3 cell transformation assay (CTA), following the prevalidation study coordinated by the European Centre for the Validation of Alternative Methods (ECVAM) and reported in this issue (Tanaka et al. [16]). Based upon the experience gained from this effort and as suggested by the Validation Management Team (VMT), some acceptance and assessment criteria have been refined compared to those used during the prevalidation study. The present protocol thus describes cell culture maintenance, the dose-range finding (DRF) experiment and the transformation assay, including cytotoxicity and morphological transformation evaluation. Use of this protocol and of the associated photo catalogue included in this issue (Sasaki et al. [17]) is recommended for the future conduct of the BALB/c 3T3 CTA.

Implementation challenges for designing integrated in vitro testing strategies (ITS) aiming at reducing and replacing animal experimentation.

At the IVTIP (in vitro testing industrial platform) meeting of November 26th 2009 entitled 'Toxicology in the 21st century ('21C')--working our way towards a visionary reality' all delegates endorsed the emerging concept of the '21C' vision as the way forward to enable a thorough, reliable and systematic approach to future toxicity testing without the use of animals. One of the emerging concepts focused on integrating a defined number of tests modelling in vivo-relevant and well-characterised toxicity pathways representing mechanistic endpoints. At this meeting the importance of Integrated Testing Strategies (ITS) as tools towards reduction and eventually replacement of the animals currently used for hazard identification and risk assessment was recognised. A follow-up IVTIP Spring 2010 meeting entitled 'Integrated In Vitro Testing Strategies (ITS)--Implementation Challenges' was organised to address pending questions about ITS. This report is not a review of the ITS literature, but a summary of the discussions triggered by presented examples on how to develop and implement ITS. Contrasts between pharmaceutical and chemical industry, as well as a list of general but practical aspects to be considered while developing an ITS emerged from the discussions. In addition, current recommendations on the validation of ITS were discussed. In conclusion, the outcome of this workshop improved the understanding of the participants of some important factors that may impact the design of an ITS in function of its purpose (e.g., screening, or early decision making versus regulatory), the context in which they need to be applied (e.g., ICH guidelines, REACH) and the status and quality of the available tools. A set of recommendations of best practices was established and the importance of the applicability of the individual tests as well as the testing strategy itself was highlighted.

Prevalidation study of the Syrian hamster embryo (SHE) cell transformation assay at pH 6.7 for assessment of carcinogenic potential of chemicals.

The Syrian hamster embryo (SHE) cell transformation assay (CTA) is an important in vitro method that is highly predictive of rodent carcinogenicity. It is a key method for reducing animal usage for carcinogenicity prediction. The SHE assay has been used for many years primarily to investigate and identify potential rodent carcinogens thereby reducing the number of 2-year bioassays performed in rodents. As for other assays with a long history of use, the SHE CTA has not undergone formal validation. To address this, the European Centre for the Validation of Alternative Methods (ECVAM) coordinated a prevalidation study. The aim of this study was to evaluate the within-laboratory reproducibility, test method transferability, and between-laboratory reproducibility and to develop a standardised state-of-the-art protocol for the SHE CTA at pH 6.7. Formal ECVAM principles for criteria on reproducibility (including the within-laboratory reproducibility, the transferability and the between-laboratories reproducibility) were applied. In addition to the assessment of reproducibility, this study helped define a standard protocol for use in developing an Organisation for Economic Co-operation and Development (OECD) test guideline for the SHE CTA. Six compounds were evaluated in this study: benzo(a)pyrene, 3-methylcholanthrene, o-toluidine HCl, 2,4-diaminotoluene, phthalic anhydride and anthracene. Results of this study demonstrate that a protocol is available that is transferable between laboratories, and that the SHE CTA at pH 6.7 is reproducible within- and between-laboratories.

Cell transformation assays for prediction of carcinogenic potential: state of the science and future research needs.

Cell transformation assays (CTAs) have long been proposed as in vitro methods for the identification of potential chemical carcinogens. Despite showing good correlation with rodent bioassay data, concerns over the subjective nature of using morphological criteria for identifying transformed cells and a lack of understanding of the mechanistic basis of the assays has limited their acceptance for regulatory purposes. However, recent drivers to find alternative carcinogenicity assessment methodologies, such as the Seventh Amendment to the EU Cosmetics Directive, have fuelled renewed interest in CTAs. Research is currently ongoing to improve the objectivity of the assays, reveal the underlying molecular changes leading to transformation and explore the use of novel cell types. The UK NC3Rs held an international workshop in November 2010 to review the current state of the art in this field and provide directions for future research. This paper outlines the key points highlighted at this meeting.

Recommended protocol for the Syrian hamster embryo (SHE) cell transformation assay.

The Syrian hamster embryo (SHE) cell transformation assay (CTA) is a short-term in vitro assay recommended as an alternative method for testing the carcinogenic potential of chemicals. SHE cells are "normal" cells since they are diploid, genetically stable, non-tumourigenic, and have metabolic capabilities for the activation of some classes of carcinogens. The CTA, first developed in the 1960s by Berwald and Sachs (1963,1964) [3,4], is based on the change of the phenotypic feature of cell colonies expressing the first steps of the conversion of normal to neoplastic-like cells with oncogenic properties. Pienta et al. (1977) [22] developed a protocol using cryopreserved cells to enhance practicality of the assay and limit sources of variability. Several variants of the assay are currently in use, which mainly differ by the pH at which the assay is performed. We present here the common version of the SHE pH 6.7 CTA and SHE pH 7.0 CTA protocols used in the ECVAM (European Centre for the Validation of Alternative Methods) prevalidation study on CTA reported in this issue. It is recommended that this protocol, in combination with the photo catalogues presented in this issue, should be used in the future and serve as a basis for the development of the OECD test guideline.

Prevalidation study of the BALB/c 3T3 cell transformation assay for assessment of carcinogenic potential of chemicals.

The cell transformation assays (CTAs) have attracted attention within the field of alternative methods due to their potential to reduce the number of animal experiments in the field of carcinogenicity. The CTA using BALB/c 3T3 cells has proved to be able to respond to chemical carcinogens by inducing morphologically transformed foci. Although a considerable amount of data on the performance of the assay has been collected, a formal evaluation focusing particularly on reproducibility, and a standardised protocol were considered important. Therefore the European Centre for the Validation of Alternative Methods (ECVAM) decided to coordinate a prevalidation study of the BALB/c 3T3 CTA. Three different laboratories from Japan and Europe participated. In the study the following modules were assessed stepwise: test definition (Module 1) consisted of the standardisation of the protocol, the selection of the cell lineage, and the preparation of a photo catalogue on the transformed foci. The within-laboratory reproducibility (Module 2) and the transferability (Module 3) were assessed using non-coded and coded 3-methylcholanthrene. Then, five coded chemicals were tested for the assessment of between-laboratory reproducibility (Module 4). All three laboratories obtained positive results with benzo[a]pyrene, phenanthrene and o-toluidine HCl. 2-Acetylaminofluorene was positive in two laboratories and equivocal in one laboratory. Anthracene was negative in all three laboratories. The chemicals except phenanthrene, which is classified by IARC (http://monographs.iarc.fr) as group 3 "not classifiable as to its carcinogenicity to human", were correctly predicted as carcinogens. Further studies on phenanthrene will clarify this discrepancy. Thus, although only a few chemicals were tested, it can be seen that the predictive capacity of the BALB/c 3T3 CTA is satisfactory. On the basis of the outcome of this study, an improved protocol, incorporating some changes related to data interpretation, has been developed. It is recommended that this protocol be used in the future to provide more data that may confirm the robustness of this protocol and the performance of the assay itself. During the study it became clear that selecting the most appropriate concentrations for the transformation assay is crucial.

An international validation study of a Bhas 42 cell transformation assay for the prediction of chemical carcinogenicity.

The Bhas 42 cell transformation assay is a sensitive short-term system for predicting chemical carcinogenicity. Bhas 42 cells were established from BALB/c 3T3 cells by the transfection of v-Ha-ras gene and postulated to have acquired an initiated state in the two-stage carcinogenesis theory. The Bhas 42 cell transformation assay is capable of detecting both tumor-initiating and tumor-promoting activities of chemical carcinogens. The full assay protocol consists of two components, the initiation assay and the promotion assay, to detect the initiating activity and the promoting activity, respectively. An international study was carried out to validate this cell transformation assay in which six laboratories from three countries participated. Twelve coded chemicals were examined in total and each chemical was tested by three laboratories. In the initiation assay, concordant results were obtained by three laboratories for eight out of ten chemicals and in the promotion assay, concordant results were achieved for ten of twelve chemicals. The positive results were obtained in all three laboratories with the following chemicals: 2-acetylaminofluorene was positive in both initiation and promotion assays; dibenz[a,h]anthracene was positive in the initiation assay; sodium arsenite, lithocholic acid, cadmium chloride, mezerein and methapyrilene hydrochloride were positive in the promotion assay. o-Toluidin hydrochloride was positive in the both assays in two of the three laboratories. d-Mannitol, caffeine and l-ascorbic acid were negative in both assays in all the laboratories, and anthracene was negative in both assays in two of the three laboratories except one laboratory obtaining positive result in the promotion assay. Consequently, the Bhas 42 cell transformation assay correctly discriminated all six carcinogens and two tumor promoters from four non-carcinogens. Thus, the present study demonstrated that the Bhas 42 cell transformation assay is transferable and reproducible between laboratories and applicable to the prediction of chemical carcinogenicity. In addition, by comparison of the present results with intra-laboratory data previously published, within-laboratory reproducibility using the Bhas 42 cell transformation assay was also confirmed.

Classification and labeling of industrial products with extreme pH by making use of in vitro methods for the assessment of skin and eye irritation and corrosion in a weight of evidence approach.

Classification and labeling of products with extreme pH values (≤ 2 or ≥ 11.5) is addressed in chemicals legislation. Following determination of pH and alkaline/acid reserve, additional in vitro tests are needed, especially to substantiate results less than corrosive. However, only limited experience with the practical application of in vitro methods to determine appropriate classifications for pH extreme products is available so far. Expert judgment and weight of evidence are given major roles under the globally harmonized system of classification and labeling of chemicals (GHS) and should be performed on a sound data basis. We have used a tiered testing strategy to assess 20 industrial products (cleaning and metal pretreatment) regarding their corrosive and irritating properties towards human skin models in vitro in the EpiDerm skin corrosion and/or skin irritation test. Nine dilutions of individual compounds were additionally tested. Non-corrosive samples were tested in the Hen's egg test chorioallantoic membrane (HET-CAM). We demonstrate how data is combined in a weight of evidence expert judgment, and give examples of classification decisions. To our knowledge this is the first comprehensive analysis of industrial products with extreme pH values to determine irritating and corrosive properties by making use of in vitro methods in a weight of evidence approach.