Energy Consumption for Furniture Joints during Drilling in Birch Plywood.

The purpose of this study is to support eco-design ideas and sustainable manufacturing techniques by examining the energy consumption related to drilling holes for different furniture connections. The experimental model is a simple piece of furniture made from birch plywood with three different types of joints. Eccentric joints, confirmat screws, and dowel measurements of energy consumption with a CNC drilling and milling machine show different values for every kind of connector. The energy consumption was measured using a portable power quality analyzer, specifically the PQ-box 150 manufactured by A:Eberle GmbH & Co. KG Nürnberg, Germany. This device likely adheres to industry standards for energy measurement, ensuring accurate and reliable results. The measurement process involved recording energy consumption at different stages of the machining process, allowing for the analysis of specific cutting work and total energy consumption for various joint types. Dowels exhibit the lowest energy consumption at 0.105 Wh for one furniture joint, confirmat screws at 0.127 Wh, while eccentric joints, despite their higher energy consumption (0.173 Wh), offer enhanced transportability and assembly flexibility of a piece of furniture. Specific cutting power for one selected piece of furniture was 227.89 J/mm3 for dowels, 190.63 J/mm3 for eccentric joints and 261.68 J/mm3 for confirmat screws.

The Dust Separation Efficiency of Filter Bags Used in the Wood-Based Panels Furniture Factory.

The relationship between the conditions of the use of filter bags made of non-woven fabric and the separation efficiency of wood dust generated in a furniture factory was experimentally determined in the conditions of pulse-jet filtration using a pilot-scale baghouse as waste during the processing of wood composites. The experiments were carried out, and we describe the results of the experiment as consisting in assembling one type of filter bag in two dust extraction installations operating under different operating conditions in the same furniture factory. The filter bags working in the assumed time intervals were then tested for their separation efficiency using a stand for testing filtration processes on a pilot scale. The test results are presented in the form of graphs and tables describing both the characteristics of the dust extraction installations and the filter fabric used, as well as the separation efficiency of bags used at different times in different industrial operating conditions for each of them. The conducted research allowed us to recognize the phenomenon of filtration in relation to a very important value, which is the separating efficiency of dust extraction in various operating conditions of dust extraction installations in a furniture factory during the long-term use of filter fabrics. The obtained results allowed us to determine the separation efficiency for the tested bags at a level of over 99.99% and to state that this separation efficiency increased with the working time of the bag. The structure of the outlet dust from filters in the wood composites processing factory constitutes an element of the working environment if the purified air is returned in a recirculation circuit to the interior of the working area. Thanks to this, it is possible to predict the separation efficiency in the long-term use of filter dust collectors for wood dust in furniture factories.