Substrate and low intensity fires influence bacterial communities in longleaf pine savanna.

Bacterial communities associated with vegetation-soil interfaces have important roles in terrestrial ecosystems. These bacterial communities, studied almost exclusively in unburnt ecosystems or those affected by rare, high-intensity wildfires, have been understudied in fire-frequented grasslands and savannas. The composition of ground-level bacterial communities was explored in an old-growth pine savanna with a centuries-long management history of prescribed fires every 1-2 years. Using 16S metabarcoding, hypotheses were tested regarding differences in bacterial families of litter and soil surface substrates in patches of ground layer vegetation that were naturally burnt or unburnt during landscape-level prescribed fires. Litter/soil substrates and fire/no fire treatments explained 67.5% of bacterial community variation and differences, driven by relative abundance shifts of specific bacterial families. Fires did not strongly affect plant or soil variables, which were not linked to bacterial community differences. Litter/soil substrates and the naturally patchy frequent fires appear to generate microhabitat heterogeneity in this pine savanna, driving responses of bacterial families. Prescribed fire management may benefit from considering how fire-altered substrate heterogeneity influences and maintains microbial diversity and function, especially in these fiery ecosystems. Frequent, low-intensity fires appear ecologically important in maintaining the diverse microbial foundation that underlie ecosystem processes and services in fire-frequented habitats.

Smoke on the Water: Comparative Assessment of Combined Thermal Shock Treatments for Control of Invasive Asian Clam, Corbicula fluminea.

Suppression of established populations of invasive alien species can be a complex and expensive process, which is frequently unsuccessful. The Asian clam, Corbicula fluminea (Müller, 1774), is considered a high impact invader that can adversely alter freshwater ecosystems and decrease their socioeconomic value. To date, C. fluminea continues to spread and persist within freshwater environments worldwide, despite repeated management attempts to prevent dispersal and suppress established populations. As extensive C. fluminea beds can often become exposed during low-water conditions, the direct application of hot or cold thermal shock treatments has been proposed as suitable mechanism for their control. Further, mechanical substrate disturbance may enhance the efficacy of thermal shock treatments by facilitating exposures to multiple layers of buried clams. In the present study, we advanced these methods by assessing combined applications of both hot and cold thermal shock treatments for control of C. fluminea, using steam spray (≥100 °C; 350 kPa), low- or high-intensity open-flame burns (~1000 °C) and dry ice (-78 °C). In a direct comparison of raking combined with hot thermal shock applications, both steam and high-intensity open-flame treatments tended to be most effective, especially following multiple applications. In addition, when hot thermal treatments are followed by a final cold shock (i.e. dry ice), steam treatments tended to be most effective. Further, when dry ice was applied either alone or prior to an application of a hot shock treatment, substantial if not complete C. fluminea mortality was observed. Overall, this study demonstrated that combined applications of hot and cold thermal shock treatments, applied following the disruption of the substrate, can substantially increase C. fluminea mortality compared to separate hot or cold treatments.

Steam and Flame Applications as Novel Methods of Population Control for Invasive Asian Clam (Corbicula fluminea) and Zebra Mussel (Dreissena polymorpha).

Control strategies for established populations of invasive alien species can be costly and complex endeavours, which are frequently unsuccessful. Therefore, rapid-reaction techniques that are capable of maximising efficacy whilst minimising environmental damage are urgently required. The Asian clam (Corbicula fluminea Müller, 1774), and the zebra mussel (Dreissena polymorpha Pallas, 1771), are invaders capable of adversely affecting the functioning and biodiversity of freshwater ecosystems. Despite efforts to implement substantial population-control measures, both species continue to spread and persist within freshwater environments. As bivalve beds often become exposed during low-water conditions, this study examined the efficacy of steam-spray (≥100 °C, 350 kPa) and open-flame burn treatments (~1000 °C) to kill exposed individuals. Direct steam exposure lasting for 5 min caused 100% mortality of C. fluminea buried at a depth of 3 cm. Further, combined rake and thermal shock treatments, whereby the substrate is disturbed between each application of either a steam or open flame, caused 100% mortality of C. fluminea specimens residing within a 4-cm deep substrate patch, following three consecutive treatment applications. However, deeper 8-cm patches and water-saturated substrate reduced maximum bivalve species mortality rates to 77% and 70%, respectively. Finally, 100% of D. polymorpha specimens were killed following exposure to steam and open-flame treatments lasting for 30 s and 5 s, respectively. Overall, our results confirm the efficacy of thermal shock treatments as a potential tool for substantial control of low-water-exposed bivalves. Although promising, our results require validation through upscaling to field application, with consideration of other substrate types, increased substrate depth, greater bivalve densities, non-target and long-term treatment effects.

Atomic Layer Deposition of Silicon Nitride from Bis(tert-butylamino)silane and N2 Plasma.

Atomic layer deposition (ALD) of silicon nitride (SiNx) is deemed essential for a variety of applications in nanoelectronics, such as gate spacer layers in transistors. In this work an ALD process using bis(tert-butylamino)silane (BTBAS) and N2 plasma was developed and studied. The process exhibited a wide temperature window starting from room temperature up to 500 °C. The material properties and wet-etch rates were investigated as a function of plasma exposure time, plasma pressure, and substrate table temperature. Table temperatures of 300-500 °C yielded a high material quality and a composition close to Si3N4 was obtained at 500 °C (N/Si=1.4±0.1, mass density=2.9±0.1 g/cm3, refractive index=1.96±0.03). Low wet-etch rates of ∼1 nm/min were obtained for films deposited at table temperatures of 400 °C and higher, similar to that achieved in the literature using low-pressure chemical vapor deposition of SiNx at >700 °C. For novel applications requiring significantly lower temperatures, the temperature window from room temperature to 200 °C can be a solution, where relatively high material quality was obtained when operating at low plasma pressures or long plasma exposure times.

'Ivory wave' toxicity in recreational drug users; integration of clinical and poisons information services to manage legal high poisoning.

BACKGROUND: Novel psychoactive substances or 'legal highs' can be defined as psychoactive substances that have been developed to avoid existing drug control measures. Consistency of name, but with change in the content of the product, may cause harm. This could result in clusters of users being poisoned and developing unexpected physical and psychiatric symptoms. We describe such an event and the clinical phenotypes of a cluster of patients poisoned with a novel psychoactive substance in 'ivory wave' and analyze data from the National Poisons Information Service (NPIS) to estimate use across the United Kingdom. In addition, the likely active ingredient in this cluster of 'ivory wave' poisonings was identified. METHODS: An analysis of consecutive patients attending the Royal Infirmary of Edinburgh emergency department in July and August 2010 with self-reported 'ivory wave' use was performed. Over a similar time frame, poisons enquiries regarding 'ivory wave' to the UK NPIS, by telephone and via the internet-based TOXBASE(®) poisons database ( www.toxbase.org ), were analyzed. A sample of 'ivory wave' powder and biological fluids from poisoned patients were investigated to determine the active ingredient. RESULTS: Thirty four emergency attendances due to 'ivory wave' toxicity were identified. The mean +/- SD (range) age was 28.6 +/- 7.8 (16-44) years. Patients demonstrated a toxidrome which lasted several days, characterized by tachycardia (65%), tachypnoea (76%), dystonia (18%), rhabdomyolysis (96%), leucocytosis (57%), agitation (62%), hallucinations (50%), insomnia (32%) and paranoia (21%). Enquiries to NPIS suggest that 'ivory wave' poisoning occurred throughout the United Kingdom. A sample of 'ivory wave' powder was analyzed and found to contain desoxypipradrol, which was also identified in biological fluids from 4 out of 5 patients tested. DISCUSSION: A cluster of cases presenting after use of a novel psychoactive substance was identified in Edinburgh and desoxypipradrol was identified as the likely cause. It was associated with prolonged psychiatric symptoms as a key feature. This chemical was regulated in response to the wider UK outbreak, which NPIS data suggest was geographically widespread but probably short lived. CONCLUSION: Novel psychoactive substances can produce significant toxicity and data from poisons centres may be used to indirectly detect new 'legal highs' that are causing clinical toxicity.

Tungsten imido complexes as precursors to tungsten carbonitride thin films.

Thin films of tungsten carbonitride have been formed on glass by low-pressure chemical vapour deposition (LP)CVD at 550 degrees C from four closely related precursors: [W(mu-N(t)Bu)(N(t)Bu)Cl(2)(H(2)N(t)Bu)](2), [W(N(t)Bu)(2)Cl(2)(TMEDA)] (TMEDA = N,N,N',N'-tetramethylethylenediamine), [W(N(t)Bu)(2)Cl(2)(py)(2)] (py = pyridine) and [W(N(t)Bu)(2)Cl(N{SiMe(3)}(2))]. The grey mirror-like films were grown with a nitrogen or ammonia bleed gas. In all cases the chlorine content of the deposited films was less than 1 at% and the oxygen content of the films was lower for those grown using ammonia. Surprisingly, the use of ammonia did not significantly change the carbon content of the resulting films. Despite the coordination environment around the metal being essentially the same and the materials having a comparable volatility, some differences in film quality were observed. The films were uniform, adhesive, abrasion resistant, conformal and hard, being resistant to scratching with a steel scalpel. X-Ray powder diffraction patterns of all the films showed the formation of beta-WN(x)C(y). As a comparison the aerosol-assisted chemical vapour deposition (AA)CVD of [W(mu-N(t)Bu)(N(t)Bu)Cl(2)(H(2)N(t)Bu)](2) was investigated and amorphous tungsten carbonitride films were deposited.