Accuracy of implant placement with computer-aided static, dynamic, and robot-assisted surgery: a systematic review and meta-analysis of clinical trials.

This systematic review explores the accuracy of computerized guided implant placement including computer-aided static, dynamic, and robot-assisted surgery. An electronic search up to February 28, 2023, was conducted using the PubMed, Embase, and Scopus databases using the search terms "surgery", "computer-assisted", "dynamic computer-assisted", "robotic surgical procedures", and "dental implants". The outcome variables were discrepancies including the implant's 3D-coronal, -apical and -angular deviations. Articles were selectively retrieved according to the inclusion and exclusion criteria, and the data were quantitatively meta-analysed to verify the study outcomes. Sixty-seven articles were finally identified and included for analysis. The accuracy comparison revealed an overall mean deviation at the entry point of 1.11 mm (95% CI: 1.02-1.19), and 1.40 mm (95% CI: 1.31-1.49) at the apex, and the angulation was 3.51˚ (95% CI: 3.27-3.75). Amongst computerized guided implant placements, the robotic system tended to show the lowest deviation (0.81 mm in coronal deviation, 0.77 mm in apical deviation, and 1.71˚ in angular deviation). No significant differences were found between the arch type and flap operation in cases of dynamic navigation. The fully-guided protocol demonstrated a significantly higher level of accuracy compared to the pilot-guided protocol, but did not show any significant difference when compared to the partially guided protocol. The use of computerized technology clinically affirms that operators can accurately place implants in three directions. Several studies agree that a fully guided protocol is the gold standard in clinical practice.

Correlation Between Presurgical Alveolar Cleft Volume Measured by Simulation Software Using CBCT and Actual Bone Volume Used for Grafting.

OBJECTIVE: To assess correlation between presurgical alveolar cleft volume measured by simulation software using CBCT and actual bone volume used for grafting. DESIGN: Prospective. SETTING: University hospital. PATIENTS: Patients with UCCLP who underwent alveolar bone grafting. INTERVENTIONS: 23 CBCT images of patients with UCCLP, aged 8.6-22.9 years, were taken. Alveolar cleft volume was measured using Mimics® software. Paired t-test was used to compare volume calculated from two measuring methods. Independent t-test was used to compare the volume between two age groups. Pearson's correlation coefficient was used to assess correlation between two measuring methods. MAIN OUTCOME MEASURES: Paired t-test showed statistically significant difference between two measuring methods. Independent t-test showed statistically significant difference between both measuring methods in both age groups. Differences between two variables in both age groups were not significantly different. Pearson's correlation coefficient indicated significantly positive correlation between presurgical alveolar cleft volume measured by simulation software using CBCT and actual bone volume used for grafting. RESULTS: Mean alveolar cleft volume measured by computer simulation was 1.30 ± 0.40 ml, whereas actual bone volume used for grafting was 1.10 ± 0.39 ml. Mean difference between both measuring methods was 0.20 ± 0.14 ml. Mean alveolar cleft volume measured by simulation software, as well as actual bone volume used for grafting, differ significantly between 2 age groups. CONCLUSIONS: There was significantly positive correlation between two measuring methods. CBCT method overestimated actual bone graft volume. Surgeons may harvest alveolar bone grafts ranging from 82% to 100% of CBCT volume.

Analgesics effect of local diclofenac in third molar surgery: a randomized, controlled trial.

OBJECTIVES: This study aimed to evaluate the effect of locally diclofenac application on postoperative pain, sequalae, and adverse effects following mandibular third molar (MTM) surgery. METHODS: A randomized, crossover, double-blind, controlled trial was conducted in 20 patients who required surgical removal of bilateral symmetrical impacted MTM at two separate appointments. The 40 MTMs were randomly allocated to two groups. One side was assigned 0.1% w/v diclofenac sodium as the diclofenac group. The contralateral side was assigned phosphate-buffered saline (PBS) as the control group. Postoperative pain intensity was measured by visual analogue scale (VAS), where the time when the first pain emerged, the time to first rescue medication, pain at 6 and 24 h after surgery, and the total number of analgesics consumed were recorded. Postoperative swelling and trismus were assessed on postoperative days 2 and 7. The differences of continuous outcomes between two groups were analyzed by paired t-test or Wilcoxon signed-rank test. RESULTS: VAS scores were significantly lower when the first pain emerged and 6 h after surgery in diclofenac group (p < 0.05). The onset of pain in the diclofenac group was significantly longer than in the control group (p < 0.05). Two patients reported mild nausea and dizziness in the diclofenac group. CONCLUSION: This study demonstrates the analgesic effectiveness of 0.1% local application of diclofenac within 6 h postoperative with few side effects. CLINICAL RELEVANCE: Locally diclofenac application is an alternative of postoperative analgesic in MTM surgery which provides pain-free periods within 6 h.

Expression of PD-L1 is HPV/P16-independent in oral squamous cell carcinoma.

Objectives: This study aimed to investigate the expression of programmed death-ligand 1 (PD-L1) and its associations with human papillomavirus (HPV) 16/18 DNA status, p16 expression, demographic, clinicopathologic and risk parameters in patients with oral squamous cell carcinoma (OSCC). Study design: A total of 85 formalin-fixed, paraffin-embedded OSCC specimens were collected. HPV16/18 DNA was detected by polymerase chain reaction. PD-L1 and p16 expressions were assessed using immunohistochemical technique. The immunostaining scores were calculated by combined positive score (CPS), previously described. The positive scoring value was determined at CPS ≥1, recommended by FDA. The associations between PD-L1 expression and HPV16/18 DNA status, p16 expression, demographic, clinicopathologic, and risk parameters were analyzed by Chi-square, Fisher's exact tests, and multivariate logistic regression. Results: PD-L1 expression was detected in 22 out of 85 cases of OSCC (25.9%). 16.5% of all cases were HPV 16/18-positive and 62.4% were p16-positive. Statistically, there were no significant associations between PD-L1 expression in OSCC and HPV16/18 DNA status, p16 expression, demographic and, clinicopathologic parameters or risk behaviors. Conclusion: Approximately one-fourth of OSCC cases were PD-L1-positive, suggesting candidacy for anti-PD-L1 immunotherapy. Furthermore, HPV infection and p16 expression were not involved with PD-L1 expression. Further clinical trials warrant the benefits of immunotherapy in patients with PD-L1-positive OSCC.

Three-Dimensionally Printed Patient-Specific Surgical Plates Increase Accuracy of Oncologic Head and Neck Reconstruction Versus Conventional Surgical Plates: A Comparative Study.

BACKGROUND: Surgeons are pursuing accurate head and neck reconstruction to enhance aesthetic and functional outcomes after oncologic resection. This study aimed to investigate whether accuracy of head and neck reconstruction is improved with the use of three-dimensionally (3D)-printed patient-specific surgical plates compared with conventional plates. METHODS: In this comparative study, patients were prospectively recruited into the study group (3DJP16) with 3D-printed patient-specific surgical plates. The patients in control group with conventional surgical plates were from a historic cohort in the same unit. The primary end point of the study was the accuracy of head and neck reconstruction. The secondary end points were accuracy of osteotomy, intraoperative blood loss, total operative time, and length of hospital stay. RESULTS: The study recruited of 33 patients, including 17 in the study group and 16 in the control group. The patients' baseline characteristics were similar between the two groups. The absolute distance deviation of the maxilla or mandible was 1.5 ± 0.5 mm in the study group and 2.1 ± 0.7 mm in the control group [mean difference, - 0.7 mm; 95% confidence interval (CI) - 1.1 to - 0.3; p = 0.003], showing superior accuracy of reconstruction for the patients with 3D-printed patient-specific surgical plates. Improved accuracy of reconstruction also was detected in terms of bilateral mandibular angles and bone grafts. Concerning the secondary end points, the accuracy of the osteotomy was similar in the two groups. No difference was found regarding intraoperative blood loss, total operative time, or length of hospital stay. CONCLUSIONS: This is the first study to prove that compared with conventional plates, 3D-printed patient-specific surgical plates improve the accuracy of oncologic head and neck reconstruction.

TRPS1 mutation associated with trichorhinophalangeal syndrome type 1 with 15 supernumerary teeth, hypoplastic mandibular condyles with slender condylar necks and unique hair morphology.

Trichorhinophalangeal syndrome type 1 (TRPS1; Online Mendelian Inheritance in Man #190350) is an autosomal dominant disorder caused by mutations in TRPS1. We report a Thai male with TRPS1 who carried a c.1842C>T (p.Arg615Ter) mutation. He had 15 supernumerary teeth, double mental foramina, hypoplastic mandibular condyles with slender condylar necks and unique ultrastructural hair findings. Body hair was absent. The hair in the area of a congenital melanocytic nevus had a greater number of hair cuticles than normal. Occipital hair had abnormal hair follicles and cuticles. The scale edges of the hair cuticles were detached and rolled up. Hypoplastic mandibular condyles with slender condylar necks, double mental foramina and the rolled up edges of hair cuticles have not been reported in patients with TRPS1.

Computer-Assisted versus Conventional Freehand Mandibular Reconstruction with Fibula Free Flap: A Systematic Review and Meta-Analysis.

BACKGROUND: Computer-assisted mandibular reconstruction facilitates preoperative surgery simulation and transfers the virtual plan to a real operation. This systematic review and meta-analysis aimed to compare the accuracy, efficiency, postoperative complications, and economic viability between computer-assisted mandibular reconstruction and conventional freehand mandibular reconstruction. METHODS: The PubMed, Embase, Cochrane Library, and Google Scholar databases were searched up to November of 2018. The accuracy, efficiency, postoperative complications, and economic viability of computer-assisted mandibular reconstruction compared to conventional freehand mandibular reconstruction were systematically reviewed. Continuous and dichotomous data were pooled in mean difference (or standardized mean difference if necessary) and odds ratio, subsequently, with 95 percent confidence interval. RESULTS: A total of 12 studies were included in the systematic review, and data extracted from 11 of them were combined in meta-analysis. The accuracy of computer-assisted mandibular reconstruction was better than or equal to that of conventional freehand mandibular reconstruction according to qualitative analysis, although the quantitative comparison from meta-analysis was excluded because of the diversity of measurements. As for efficiency, computer-assisted mandibular reconstruction, when compared to conventional freehand mandibular reconstruction, revealed a shorter ischemic time, reconstructive time, total operative time, and length of stay. There was no difference in postoperative complication rate. CONCLUSIONS: Computer-assisted mandibular reconstruction showed increased efficiency considering the reduced ischemic time, total operative time, reconstructive time, and length of stay. However, the accuracy, reconstruction outcomes, and perioperative cost should be further elucidated because of diverse measurements and the lack of included studies.