Micro-hardness evaluation of a micro-hybrid composite resin light cured with halogen light, light-emitting diode and argon ion laser.

This in vitro study aimed to determine whether the micro-hardness of a composite resin is modified by the light units or by the thickness of the increment. Composite resin disks were divided into 15 groups (n = 5), according to the factors under study: composite resin thickness (0 mm, 1 mm, 2 mm , 3 mm and 4 mm) and light units. The light activation was performed with halogen light (HL) (40 s, 500 mW/cm(2)), argon ion laser (AL) (30 s, 600 mW/cm(2)) or light-emitting diode (LED) (30 s, 400 mW/cm(2)). Vickers micro-hardness tests were performed after 1 week and were carried out on the top surface (0 mm-control) and at different depths of the samples. Analysis of variance (ANOVA) and Tukey tests (P < or = 0.05) revealed no statistically significant difference among the light units for the groups of 0 mm and 1 mm thickness. At 2 mm depth, the AL was not statistically different from the HL, but the latter showed higher micro-hardness values than the LED. In groups with 3 mm and 4 mm thickness, the HL also showed higher micro-hardness values than the groups activated by the AL and the LED. Only the HL presented satisfactory polymerization with 3 mm of thickness. With a 4 mm increment no light unit was able to promote satisfactory polymerization.

Tensile bond strength of a flowable composite resin to ER:YAG-laser-treated dentin.

BACKGROUND AND OBJECTIVES: This in vitro study evaluated the influence of a flowable composite resin (FCR) on the tensile bond strength of resin to dentin treated with the Er:YAG Laser (L) and diamond bur (DB). STUDY DESIGN/MATERIALS AND METHODS: Ninety dentin surfaces obtained from 45 third molars were ground and randomly divided into six groups (n = 15): G1-DB, G2-DB+FCR, G3-L (100 mJ, 10 Hz, 37.04 J/cm2), G4-L (100 mJ, 10 Hz, 37.04 J/cm2)+FCR, G5-L (250 mJ, 2 Hz, 92.60 J/cm2), and G6-L (250 mJ, 2 Hz, 92.60 J/cm2)+FCR. After surface etching with 37% phosphoric acid and the application of an adhesive system, inverted conical specimens were prepared with a hybrid composite resin. In groups G2, G4, and G6 a FCR was placed before the hybrid composite resin. After 24 hours-storage in distilled water, the tensile test was performed in a universal testing machine (0.5 mm/minute, 500 N). RESULTS: Data were submitted to Kruskal Wallis test (P = 0.01). The mean bond strength values (MPa+/-SD) were: G1-13.54 (+/-2.99), G2-14.67 (+/-2.32), G3-9.49 (+/-3.09), G4-14.60 (+/-2.76), G5-8.97 (+/-3.89), and G6-13.02 (+/-2.18). Groups G1 and G2 presented the highest bond strength values, which were statistically similar to those of G4 and G6. The groups treated with laser and without the FCR (G3 and G5) showed the lowest shear bond strength values. CONCLUSIONS: FCR can increase the adhesion to dentin treated with Er:YAG laser within different parameters.