Synthesis and luminescent properties of a linear difluorene pyrazine (D-A-D) derivative as a selective indicator for a reversible acid-base vapour sensor.

We have synthesized a structure in which pyrazine is the core structure and fluorene derivatives are attached to both sides. Photo physical investigations such as aprotic solvents (Hexane to DMF) were carried out. A redshift was revealed from non-polar aprotic solvents to polar aprotic solvents. The luminescence intensity was gradually decreased, which is incredibly more complex towards changes in the solvent polarization than their UV/Vis absorption spectra. The compound showed a redshift from 445 nm to 473 nm when slowly increasing the water fraction (fw) from 0 to 30 %. Also, rising water fraction (fw > 40-90 %) effectively attenuated the instantaneous emission intensity was observed. At the same time, the intensity of the emission peak was reduced due to the TICT effect on fluorene and pyrazine rings due to enhanced solvent polarity. In addition, optically reversible acidofluorochromic properties were performed experimentally in both solvent and solid phases. For the acidic substances TFA and HF, which contain fluorine, new redshift peaks from 425 nm and 503 nm were observed upon reaction with the PDF solution, and the emission intensity was extinguished by more than 90 % and 60 %, respectively. Upon addition of TFA up to 1500 equal, the PDF mixture suffered from 50 % lower energy absorption intensity. The 1H NMR spectrum confirmed the proposed mechanism (TFA/TEA, ON-OFF-ON). Therefore, the present work presents a novel approach to fabricating ON-OFF-ON active-pull pyrazine scaffolds that can be used in DSEgens, referred to as "ON-OFF-ON" fluorescent sensors, for multifunctional applications.

Optimizing cyanine dye properties for enhanced dyeing and inkjet printing on diverse Substrates: Photophysical and colorimetric investigations.

Cyanine-based cationic dyes with different substituents in the donor unit were easily synthesized using readily available starting materials. The prepared dye molecules were spectroscopically characterized by NMR, FT-IR, and HR-Mass, and their thermal stability was measured by TGA, DSC, and XRD. Based on the TGA and DSC measurements, it was concluded that all the dyes are thermally stable up to 200 °C. Also, powder XRD was studied for all dyes to identify the explicit crystallinity and morphological nature of the dyes. A dye dispersion solution was prepared for the proper dyeing of modacrylic fabric and the dyed fabric showed good color strength K/S for dyes R1, R2, and R6 and fragile color strength for R3, R4,and R5. These dyes are also used for printing on substrates like paper and fabric using ink-jet printing. These dyes were also used for transferability printing applications on various fabrics.

A novel fluorophore with multichromic effect and its application in LED light for the volatile vapor detection.

Successfully designed and synthesized diaryl maleimide DAM, and their structure was confirmed by mass spectroscopy and NMR techniques. They investigated their photophysical properties, such as solvatochromic and the aggregation effect of AIE/ACQ on the water/DMF ratio, and other studies of solid-state mechanofluorochromic, such as grinding, exposure to solvent fumes, hydrostatic pressures, and vapochromic. Interestingly, the solvent methods gave very similar results in both the dissolving phase and the vapor phase. For the solution state from hexane to CH2Cl2, a greenish-yellow to orange emission was observed. From hexane to dichloromethane, naked-eye colorimetric changes (from yellow to orange in a solid state) were observed. Very interesting results were obtained, the yellow solid was ground for 1 min, it turned into an orange color, and its wavelengths were red-shifted in both absorption and emission. Subsequently, the ground sample was exposed to diethyl ether vapors, which returned to the original green-yellow emission and absorption. The applied hydrostatic pressures (0-4Mpa) in DAM gave excellent red-shifted emission, and then their hydrostatic pressures were increased to 4-16 Mpa, and the red-shifted emission gradually decreased.

Highly emissions of TPA-linear based pyrazine derivatives with different mechanochromic luminosity.

We designed the TPA-based linear pyrazine derivatives of PP-1 and PP-2, synthesized using the conventional Suzuki cross-linking reaction. It was followed by photophysical studies such as aprotic solvent (Haxene to DMF). A red-shift was observed from the non-polar aprotic solvent to the polar aprotic solvent, and the emission intensity was gradually decreased. In addition, the Aggregation-induced emission (AIE) effect has been studied against the DMF/water addition of linear pyrazine compounds. It showed a classic aggregation-caused quenching effect (ACQ) and red-shifted at an increase of (fw) 0 to 40%. After this case, when the water fraction in these studies was increased by (fw) 50 to 90%, a blue shift and a mild AIE effect has occurred. And also, was investigated acidochromic effect of compounds PP-1 and PP-2 using TFA acid. Absorption and emission intensity were gradually reduced as the acid concentration increased for these studies, while the new peaks appeared red-shifted in the absorption spectrum. They were examined before and after exposure to UV light irradiation in the synthesized dye compounds.

Effects of Xanthene Fluorophore on Light Physical Properties and their Dyeing Performance on Modacrylic Fabrics.

We designed the new xanthene dyes by introducing the donor and acceptor group of electrons in the 5' position of the carboxyphenyl ring. These synthesized dye molecules were identified using spectroscopy. And the photophysical studies, such as solvent optimization, were further explored before and after photodegradation of all synthesized dye compounds in both states (solution and solid). The resulting dyed modacrylic fabrics and measured their K/S values, reflectance (%), solid UV absorbance, and photoluminescence. All compounds are plotted on a chromaticity map in the pink region. During photodegradation, the stability of the molecule depends on the effect of the functional groups (donor to acceptor). In this case, ln[C/C0] (%) became the decreasing sequence from an electron donor to acceptor, as the electrons followed from the donation function group to the carboxylic function group. Therefore, the electron-accepting group dyes decompose rapidly during ultraviolet radiation.

A novel class of xanthene dyes with chemically linked UV absorber molecule and their photophysical properties.

In this paper, we prepared a new class of chemically linked UV absorber XU2 & XU3, and their photophysical, chemical properties and substrate durability were investigated. Spectroscopic behavior at various solvent and pH levels for this dye solution has been evaluated. Successfully designed an open ring form of xanthene moiety, linked a UV absorber to it, and made XU2 & XU3 that have shown good absorbance and emission band maxima at all solvents and pH mediums. Further, the found UV-Vis absorbance band maxima (λmax), PL emission maxima (λem), molar extinction coefficient (εmax) and Stokes shifts (ΔνST) when compared to commercially available dye 1. The synthesised XU2 & XU3 have shown brilliant results from exposed UV light at irradiation processing time, due to the light energy passes through the molecule by keto-enol tautomerisation between phenolic hydrogen and carbonyl carbon like a six-member ring. So it can be acted as radioless behaviour in the visible region, and it can relax the energy without any assistance. Hence, the UV absorber has protected the compound like a UV Resistance.