Fabrication and evaluation of non-mulberry silk fibroin fiber reinforced chitosan based porous composite scaffold for cartilage tissue engineering.

Lack of potential regenerative medicine to reconstruct damaged cartilage tissue has accelerated investigation and development of potential biomaterial for cartilage tissue engineering. In this study, we fabricated micron-sized non-mulberry silk fibroin fiber (SFF) using N,N-Dimethylacetamide (DMAC)/10% LiBr solution and further used to develop SFF reinforced chitosan(CH) based porous scaffold with desired pore size, porosity, swelling and structural stability. The developed scaffold was characterized for its various physico-chemical, mechanical and biological properties. The developed CH/SFF composite scaffold facilitates human mesenchymal stem cell (hMSCs) attachment, colonization and extracellular matrix deposition. Furthermore, hMSCs shows significantly higher sulfated glycosaminoglycan deposition over CH/SFF in comparison to pure chitosan scaffold (control). Immunocytochemistry studies have shown enhanced expression of collagen type II and aggrecan by hMSCs over composite scaffold than chitosan scaffold. Thus, non-mulberry silk fibroin fiber reinforced chitosan based scaffold might be suitable scaffold that can act as a potential artificial matrix for cartilage tissue engineering.

Generation of bioactive nano-composite scaffold of nanobioglass/silk fibroin/carboxymethyl cellulose for bone tissue engineering.

The development of bone tissue construct through tissue engineering approach offers a great promise in meeting the increasing demand for repair and regeneration of damaged and/or diseased bone tissue. For the generation of bone tissue engineered construct, polymer-ceramic composite matrices with nanostructure architecture and mesenchymal stem cells (hMSCs) of human origin are of prime requirement. Keeping these in view, in the present work a novel electrospun nanofibrous silk fibroin (SF)/carboxymethyl cellulose (CMC)/nano-bioglass (nBG) composite scaffold that mimics native bone extracellular matrix with appropriate composition was designed and fabricated by free liquid surface electrospinning technique. The scaffold possesses desired morphological, structural, biodegradability, bioactivity, surface roughness and mechanical properties thereby exhibited an excellent platform to support the growth of cells. The in-vitro culture of hMSCs over the developed scaffold has shown adhesion, proliferation and viability of cells, thus facilitated cell-scaffold construct generation and further extracellular bone matrix formation through osteogenic differentiation as evident from alkaline phosphatase activity, biomineralization, immunostaining and Runx2/osteocalcin expression assessment. Thus, the developed hMSCs seeded scaffold construct might be suitable for bone tissue engineering applications.

Development of novel silk fibroin/polyvinyl alcohol/sol-gel bioactive glass composite matrix by modified layer by layer electrospinning method for bone tissue construct generation.

The worldwide occurrence of bone tissue related defects as well as diseases and lack of successful perpetual cure has attracted attention and accelerated exploration of composite scaffolding material with superior bioactivity, osteoinductivity and osteoconductivity properties. Among such biomaterials, silk fibroin and bioglass composite attained special emphasis to develop tissue engineered construct with a hierarchical structure ranging from nano to microscale thereby mimicking bone tissue extracellular matrix. In the present study, a bilayer deposition of natural biopolymer (silk fibroin) and synthetic polymer (polyvinyl alcohol) solution with 58s bioactive glass sol was done by free liquid surface electrospinning and further stabilized through ethanol washing to fabricate novel nanofibrous composite scaffold. The fabricated composite scaffold possesses superior stiffness, hydrophilicity, bioactivity and superior osteogenic potential. The scaffolds were characterized for its fiber diameter distribution, hydrophilicity, tensile strength and apatite forming ability. Field emission scanning electron microscope and transmission electron microscope analysis demonstrate the apatite like particle formation over the scaffold after treatment with simulated body fluid, which improved osteogenicity of the developed scaffold. The biocompatibility, biomineralization and osteogenic potential of composite scaffold were evaluated by cell culture study using cord blood derived mesenchymal stem cells, proving that the developed composite scaffold is biocompatible and possess excellent osteogenic potential for neo bone tissue regeneration. Thus, the developed nanobiocomposite scaffold has been proven to be potential for developing bone tissue grafts for future clinical applications.

Carboxymethyl cellulose enables silk fibroin nanofibrous scaffold with enhanced biomimetic potential for bone tissue engineering application.

Novel silk fibroin (SF) and carboxymethyl cellulose (CMC) composite nanofibrous scaffold (SFC) were developed to investigate their ability to nucleate bioactive nanosized calcium phosphate (Ca/P) by biomineralization for bone tissue engineering application. The composite nanofibrous scaffold was prepared by free liquid surface electrospinning method. The developed composite nanofibrous scaffold was observed to control the size of Ca/P particle (≤100nm) as well as uniform nucleation of Ca/P over the surface. The obtained nanofibrous scaffolds were fully characterized for their functional, structural and mechanical property. The XRD and EDX analysis depicted the development of apatite like crystals over SFC scaffolds of nanospherical in morphology and distributed uniformly throughout the surface of scaffold. Additionally, hydrophilicity as a measure of contact angle and water uptake capacity is higher than pure SF scaffold representing the superior cell supporting property of the SF/CMC scaffold. The effect of biomimetic Ca/P on osteogenic differentiation of umbilical cord blood derived human mesenchymal stem cells (hMSCs) studied in early and late stage of differentiation shows the improved osteoblastic differentiation capability as compared to pure silk fibroin. The obtained result confirms the positive correlation of alkaline phosphatase activity, alizarin staining and expression of runt-related transcription factor 2, osteocalcin and type1 collagen representing the biomimetic property of the scaffolds. Thus, the developed composite has been demonstrated to be a potential scaffold for bone tissue engineering application.

A novel electrospinning approach to fabricate high strength aqueous silk fibroin nanofibers.

The present paper describes a rapid method of producing concentrated aqueous regenerated Bombyx mori silk fibroin (RSF) solution by applying mild shearing under forced dehumidified air and generation of electrospun SF nanofibers from concentrated solution with high mechanical strength using free liquid surface electrospinning machine. The shear induced concentrating mechanism favoured the electrospinning process by enhancing the viscosity (>2.43Pas as onset for electrospinning) and decreasing the surface tension of the solution (40.1-37.7mN/m). Shearing reduced the ß-turns and random coil molecular conformation and thereby, intensified the ß-sheet content from 16.9% to 34% which is the minimum content needed to commence RSF nanofibers formation. Subsequently, electrospun nanofibrous mats were produced from different batches of concentrated SF solutions (15-21wt%). Among the concentrated RSF, 17wt% RSF solution was the most favourable concentration producing electrospun nanofibrous mat having lowest average fiber diameters of 183±55nm and good tensile strength. The mechanical strength of the nanofibrous sheet was further improved by cross-linking with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride and N-hydroxysuccinimide (EDC+NHS) which might be due to enhancement of ß-sheet content. These nanofibers exhibited 17.57±1.13MPa ultimate tensile strength, 12.48±1.46% tensile strain at break and 37.7% increase in root mean square surface roughness which is favourable feature for cell adhesion and neo-tissue formation.

Effect of Span 60 on the Microstructure, Crystallization Kinetics, and Mechanical Properties of Stearic Acid Oleogels: An In-Depth Analysis.

Modulation of crystallization of stearic acid and its derivatives is important for tuning the properties of stearate oleogels. The present study delineates the crystallization of stearic acid in stearate oleogels in the presence of Span 60. Microarchitecture analysis revealed that stearic acid crystals in the oleogels changed its shape from plate-like structure to a branched architecture in the presence of Span 60. Consequently, a significant variation in the mobility of the solute molecules inside the oleogel (Fluorescence recovery after photobleaching studies, FRAP analysis) was observed. Thermal analysis (gelation kinetics and DSC) revealed shortening of nucleation induction time and secondary crystallization with an increase in the Span 60 concentration. Furthermore, isosolid diagram suggested better physical stability of the formulations at higher proportions of Span 60. XRD analysis indicated that there was a decrease in the crystal size and the crystallinity of the stearic acid crystals with an increase in Span 60 concentration in the Span 60 containing oleogels. However, crystal growth orientation was unidirectional and found unaltered with Span 60 concentration (Avarmi analysis using DSC data). The mechanical study indicated a composition-dependent variation in the viscoelastic properties (instantaneous [τ1 ], intermediate [τ2 ], and delayed [τ3 ] relaxation times) of the formulations. In conclusion, Span 60 can be used to alter the kinetics of the crystallization, crystal habit and crystal structure of stearic acid. This study provides a number of clues that could be used further for developing oleogel based formulation.

Molecular Docking and Interactions of Pueraria Tuberosa with Vascular Endothelial Growth Factor Receptors.

Pueraria tuberosa is known for its therapeutic potentials in cardiovascular disorders, but its effect in angiogenesis has not been studied so far. In this study, a computational approach has been applied to elucidate the role of the phytochemicals in inhibition of angiogenesis through modulation of vascular endothelial growth factor receptors: Vascular endothelial growth factor receptor-1 and vascular endothelial growth factor receptor-2, major factors responsible for angiogenesis. Metabolite structures retrieved from PubChem and KNApSAcK - 3D databases, were docked using AutoDock4.2 tool. Hydrogen bond and molecular docking, absorption, distribution, metabolism and excretion and toxicity predictions were carried out using UCSF Chimera, LigPlot(+) and PreADMET server, respectively. From the docking analysis, it was observed that puerarone and tuberostan had significant binding affinity for the intracellular kinase domain of vascular endothelial growth factor receptors-1 and vascular endothelial growth factor receptor-2 respectively. It is important to mention that both the phytochemicals shared similar interaction profile as that of standard inhibitors of vascular endothelial growth factor receptors. Also, both puerarone and tuberostan interacted with Lys861/Lys868 (adenosine 5'-triphosphate binding site of vascular endothelial growth factor receptors-1/vascular endothelial growth factor receptors-2), thus providing a clue that they may enforce their inhibitory effect by blocking the adenosine 5'-triphosphate binding domain of vascular endothelial growth factor receptors. Moreover, these molecules exhibited good drug-likeness, absorption, distribution, metabolism and excretion properties without any carcinogenic and toxic effects. The interaction pattern of the puerarone and tuberostan may provide a hint for a novel drug design for vascular endothelial growth factor tyrosine kinase receptors with better specificity to treat angiogenic disorders.

Development of novel electrospun nanofibrous scaffold from P. Ricini And A. Mylitta silk fibroin blend with improved surface and biological properties.

Biomaterials that stimulate cell attachment and proliferation without any surface modification (e.g. RGD coating) provide potent and cost effective scaffold for regenerative medicine. This study assessed the physico-chemical properties and cell supportive potential of a silk fibroin blend scaffold derived from eri (Philosamia ricini) and tasar (Antheraea mylitta) silk (ET) respectively by electrospinning process. The scanning electron microscopy and transmission electron microscopy study found that the fiber diameters are in 200 to 800nm range with flat morphology. The porosity of ET scaffold is found to be 79±5% with majority of pore diameter between 2.5 to 5nm. Similarly, Bombyx mori (BM) silk fibroin and gelatin nanofibrous scaffolds were prepared and taken as control. The ultimate tensile strength of the ET and BM scaffold are found to be 1.83±0.13MPa and 1.47±0.10MPa respectively. The measured contact angle (a measure of hydrophilicity) for ET (54.7°±1.8°) is found to be lower than BM (62°±2.3°). The ability to deposit apatite over ET is comparable to that of BM nanofibers. All the scaffolds were seeded with cord blood derived mesenchymal stem cells (hMSCs) and cultured for 14days in vitro. The immunofluorescence study reveals enhanced cell attachment with higher metabolic activity for MSCs grown over ET than BM and gelatin. The ET scaffold also demonstrated expression of higher amount cell adhesion molecules (CD29/CD44) and higher proliferation rate than BM and gelatin as confirmed by MTT assay, DNA content estimation assay, flow cytometry study and SEM study. Overall, it may be concluded that ET scaffold may have potential in developing bone tissue grafts for clinical applications in the future.

Degradation mechanism and control of blended eri and tasar silk nanofiber.

Fabrication of nanofibers from wild varieties of silk such as eri and tasar is very promising for tissue engineering application because of the presence of RGD (arginine-glycine-aspartic acid) ligand and high content of hydrophilic amino acids. In this study, the biodegradation of silk fibroin (SF) nanofibers have been studied in protease XIV solution to analyze the degradation behavior. The present study reveals that the degradation of nanofibrous mat strongly depends on hydrophilic amino acid fragments possessing bulky groups connecting the crystalline portion in nanofibrous structure. The newly found mechanism shows that ß sheet content and percentage of crystal in nanofibers play a major role in addition to hydrophilic fragments in degradation processes. Understanding of this mechanism can optimize the preparation of nanofibers with controlled and flexible degradation behavior without affecting essential biomaterial properties such as hydrophilicity, mechanical strength, and morphological property. This knowledge would widen the application of silk-based biomaterial for several tissues engineering application.

Directing osteogenesis of stem cells with hydroxyapatite precipitated electrospun eri-tasar silk fibroin nanofibrous scaffold.

Stimulating stem cell differentiation without growth factor supplement offers a potent and cost-effective scaffold for tissue regeneration. We hypothesise that surface precipitation of nano-hydroxyapatite (nHAp) over blends of non-mulberry silk fibroin with better hydrophilicity and RGD amino acid sequences can direct the stem cell towards osteogenesis. This report focuses on the fabrication of a blended eri-tasar silk fibroin nanofibrous scaffold (ET) followed by nHAp deposition by a surface precipitation (alternate soaking in calcium and phosphate solution) method. Morphology, hydrophilicity, composition, and the thermal and mechanical properties of ET/nHAp were examined by field emission scanning electron microscopy, TEM, FT-IR, X-ray diffraction, TGA and contact angle measurement and compared with ET. The composite scaffold demonstrated improved thermal stability and surface hydrophilicity with an increase in stiffness and elastic modulus (778 ± 2.4 N/m and 13.1 ± 0.36 MPa) as compared to ET (160.6 ± 1.34 N/m and 8.3 ± 0.4 MPa). Mineralisation studies revealed an enhanced and more uniform surface deposition of HAp-like crystals, while significant differences in cellular viability and attachment were observed through 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay and confocal microscopy study. The cell viability and expression of adhesion molecules (CD 44 and CD 29) are found to be optimum for subsequent stages of growth proliferation and differentiation. The rates of proliferation have been observed to decrease owing to the transition of MSC from a state of proliferation to a state of differentiation. The confirmation of improved osteogenic differentiation was finally verified through the alkaline phosphatase assay, pattern of gene expression related to osteogenic differentiation and morphological observations of differentiated cord blood human mesenchymal stem cells under fluorescence microscope. The results obtained showed the improved physicochemical and biological properties of the ET/nHAp scaffold for osteogenic differentiation without the addition of any growth factors.

Cryopreservation of hMSCs seeded silk nanofibers based tissue engineered constructs.

Long term cryopreservation of tissue engineering constructs is of paramount importance to meet off-the shelf requirements for medical applications. In the present study, the effect of cryopreservation using natural osmolytes such as trehalose and ectoin with and without conventional Me2SO on the cryopreservation of tissue engineered constructs (TECs) was evaluated. MSCs derived from umbilical cord were seeded on electrospun nanofibrous silk fibroin scaffolds and cultured to develop TECs. TECs were subjected to controlled rate freezing using nine different freezing solutions. Among these, freezing medium consisting of natural osmolytes like trehalose (40mM), ectoin (40mM), catalase (100µg) as antioxidant and Me2SO (2.5%) was found to be the most effective. Optimality of the chosen cryoprotectants was confirmed by cell viability (PI live/dead staining), cell proliferation (MTT assay), microstructure analysis (SEM), membrane integrity (confocal microscopy) and in vitro osteogenic differentiation (ALP assay, RT-PCR and histology) study carried out with post-thaw cryopreserved TECs. The mechanical integrity of the cryopreserved scaffold was found to be unaltered. The performance of the freezing medium towards cryopreservation of TEC was superior than the performance achieved using conventional Me2SO and similar to the non cryopreserved TEC. Overall we have formulated an efficient freezing medium that may pave the way of long term preservation of TECs with maintaining its integrity, MSCs viability and differentiation potentiality. It was observed that the performance of freezing medium for cryopreservation of TECs was better than the Me2SO.

Targeting cryopreservation-induced cell death: a review.

Despite marked developments in the field of cryopreservation of cells and tissues for research and therapeutic applications, post-thaw cell death remains a significant drawback faced by cryobiologists. Post cryopreservation apoptosis and necrosis are normally observed within 6 to 24 h after post-thaw culture. As a result, massive loss of cell viability and cellular function occur due to cryopreservation. However, in this new generation of cryopreservation science, scientists in this field are focusing on incorporation of apoptosis and necrosis inhibitors (zVAD-fmk, p38 MAPK inhibitor, ROCK inhibitor, etc.) to cryopreservation and post-thaw culture media. These inhibitors target and inhibit various proteins such as caspases, proteases, and kinases, involved in the cell death cascade, resulting in reduced intensity of apoptosis and necrosis in the cryopreserved cells and tissues, increased cell viability, and maintenance of cellular function; thus improved overall cryopreservation efficiency is achieved. The present article provides an overview of various cell death pathways, molecules mediating cryopreservation-induced apoptosis and the potential of certain molecules in targeting cryopreservation-induced delayed-onset cell death.

Effects of non-toxic cryoprotective agents on the viability of cord blood derived MNCs.

The present work investigates the effects of a variety of natural cryoprotectants in combination on post-thaw viability and apoptosis of cryopreserved mononuclear cells (MNCs) derived from umbilical cord blood. The extracellular cryoprotectants (10 mM) namely trehalose, hydroxyl ethyl starch, polyvinyl pyrrolidine and intracellular CPAs (5 mM) like erythritol, taurine and ectoine were used to prepare different combinations of freezing medium following L9 (3(4)) Taguchi orthogonal array. Catalase, coenzyme Q10 and n-acetyl cystine (100 microg/m) were added as antioxidants. Among various combinations, freezing medium consisting of hydroxyl ethyl starch, ectoin and co-enzyme Q10 with 10% FBS is found to be most effective combination achieving maximum cell viability of 93%, 5.6% early apoptotic, 0.7% late apoptotic and 0.1% necrotic cells. SEM and phase contrast microscopy confirmed the normal cell morphology of the post-thaw cultured cells with retaining their membrane integrity. The survival rate of MNCs is higher than the rate achieved using conventional Me2SO.

Improved bioethanol production using fusants of Saccharomyces cerevisiae and xylose-fermenting yeasts.

The present research deals with the development of a hybrid yeast strain with the aim of converting pentose and hexose sugar components of lignocellulosic substrate to bioethanol by fermentation. Different fusant strains were obtained by fusing protoplasts of Saccharomyces cerevisiae and xylose-fermenting yeasts such as Pachysolen tannophilus, Candida shehatae and Pichia stipitis. The fusants were sorted by fluorescent-activated cell sorter and further confirmed by molecular characterization. The fusants were evaluated by fermentation of glucose-xylose mixture and the highest ethanol producing fusant was used for further study to ferment hydrolysates produced by acid pretreatment and enzymatic hydrolysis of cotton gin waste. Among the various fusant and parental strains used under present study, RPR39 was found to be stable and most efficient strain giving maximum ethanol concentration (76.8 ± 0.31 g L(-1)), ethanol productivity (1.06 g L(-1) h(-1)) and ethanol yield (0.458 g g(-1)) by fermentation of glucose-xylose mixture under test conditions. The fusant has also shown encouraging result in fermenting hydrolysates of cotton gin waste with ethanol concentration of 7.08 ± 0.142 g L(-1), ethanol yield of 0.44 g g(-1), productivity of 0.45 g L(-1) h(-1) and biomass yield of 0.40 g g(-1).

Isolation of pure compound R/J/3 from Pluchea indica (L.) Less. and its anti-amoebic activities against Entamoeba histolytica.

The plant Pluchea indica is known for its anti-inflammatory, anti-ulcer, anti-pyretic, hypoglycemic, diuretic and anti-microbial activities besides many other pharmacological activities. We have isolated and purified seven compounds from the methanolic root extract of this plant by column chromatography. The compounds were identified by spectroscopic analyses. The anti-amoebic activities of the pure compound R/J/3 was investigated against the HM1 strain of Entamoeba histolytica. The compound, R/J/3 showed the most pronounced anti-proliferative activity at a dose of 50 microg/ml. It also showed a marked activity on cell lysis of trophozoites, 4h after administration. The cell lytic activity was compared with metronidazole (5 microg/ml) as positive control.

Sensitivity and performance characteristics of a direct PCR with stool samples in comparison to conventional techniques for diagnosis of Shigella and enteroinvasive Escherichia coli infection in children with acute diarrhoea in Calcutta, India.

As the sensitivity of the conventional techniques for identifying Shigella spp. and enteroinvasive Escherichia coli (EIEC) causing dysentery cases is low, a PCR assay was evaluated in this study. Analytical sensitivity (2 x 10(2) cfu) of the PCR technique was obtained by artificially spiking negative stool samples with a standard strain of S. flexneri type 2, then determining the detection limit. Specificity (100%) of the method was determined by testing a number of known Shigella and EIEC strains and organisms other than Shigella spp. A total of 300 stool samples collected from children with acute diarrhoea was plated on to two selective agar media after enrichment in Luria broth. Shigella spp. were isolated from 7.7% (23 of 300) and EIEC from 1% (3 of 300) patients. All enriched stool samples were subjected to PCR to amplify the target sequence of invasive plasmid antigen (ipa)H locus, a multicopy element found on the chromosome and invasion plasmid. The stool PCR was positive in 24 of the 26 culture-positive and in 22 culture-negative stools, thus detecting the presence of Shigella spp. or EIEC in 15.3% (46 of 300) of diarrhoea cases. When an ial probe was used for colony hybridistion with enriched stool cultures blotted on to membranes, 9.6% (29 of 300) of dysentery cases were identified as being caused by Shigella spp. or EIEC. Thus the sensitivity of enriched stool culture, colony hybridisation and enriched stool PCR was found to be 54%, 60% and 96%, respectively, when each of the methods was compared to the total microbiologically confirmed cases of dysentery. It was also observed that only 38% (48 of 126) of acute bloody dysentery cases actually had shigella or EIEC infection, as confirmed by laboratory methods. Moreover, this PCR assay could identify a number of untypable Shigella strains (Sh OUT), which would have remained undiagnosed had this assay not been used.

Chemistry of metal-bound anion radicals. A family of mono- and bis(azopyridine) chelates of bivalent ruthenium.

The reaction of the dihydride [RuII(H)2(CO)(PPh3)3], 3, with excess azo-2,2'-bipyridine (abp) in boiling dry benzene has afforded the diradical bischelate [RuII(abp.-)2(CO)(PPh3)], 4, and the hydridic monochelate monoradical [RuII(abp.-)(H)(CO)(PPh3)2], 5. A similar reaction between 3 and 2-(p-chlorophenylazo)pyridine (Clpap) did not yield a bischelate, but the hydridic monoradical [RuII(Clpap.-)(H)(CO)(PPh3)2], 6, has been isolated. Upon treatment of 4-6 with NH4PF6 in a wet dichloromethane-acetonitrile medium, the one-electron-oxidized salts 4+PF6-, 5+PF6-, and 6+PF6- are isolated, H+ being the oxidizing agent. The X-ray structures of 4+PF6-.CH2Cl2, 5+PF6-.H2O, and 6+PF6- have been determined. In the monoradical 4+ the azo N-N bond lengths in the two chelate rings are 1.284(6) and 1.336(6) A, showing that the radical electron is localized in the latter ring. The half-filled extended Hückel HOMO is indeed found to be so localized, and it has a large azo character. Complexes 4-6 display radical redox couples with E1/2 in the range -0.5 to +0.10 V vs SCE. The E1/2 values qualitatively correlate with corresponding vco values (1900-2000 cm-1). The monoradicals (S = 1/2) 4+, 5, and 6 uniformly display a strong EPR signal near g = 2.00. Metal-mediated magnetic interaction makes the EPR-silent diradical 4 strongly antiferromagnetic with J = -299 cm-1. Crystal data are as follows: (4+PF6-.CH2Cl2, C40H33Cl2F6N8-OP2Ru) monoclinic, space group P2(1)/c (no. 14), a = 14.174(6) A, b = 16.451(4) A, c = 18.381(4) A, beta = 98.00(3) degrees, Z = 4; (5+PF6-.H2O, C47H41F6N4O2P3Ru) monoclinic, space group P2(1)/n (no. 14), a = 9.433(2) A, b = 38.914(17) A, c = 13.084(3) A, beta = 103.47(2) degrees, Z = 4; (6+PF6-, C48H39ClF6N3OP3Ru) monoclinic, space group P2(1)/n (no. 14), a = 10.496(5) A, b = 22.389(8) A, c = 19.720(6) A, beta = 90.53(3) degrees, Z = 4.

Azo anion radical complexes of osmium and related nonradical species.

The reaction of [Os(H)(Br)(CO)(PPh3)3], 5, with 2-(phenylazo)pyridine (pap) in boiling dry heptane has afforded the azo anion radical complex [Os(pap.-)(Br)(CO)(PPh3)2], 6a, as the major product and [Os(pap)(H)(CO)(PPh3)2]Br, 7, as a minor byproduct. Upon replacing pap by the better pi-acceptor azo-2,2'-bipyridine (abp) in the above synthesis, the radical complex [Os(abp.-)(Br)(CO)(PPh3)2], 6b, becomes the sole product. It is proposed that 6 is formed via homolytic cleavage of the Os-H bond in 5; in the formation of 7, the Os-Br bond of 5 is heterolytically cleaved. The X-ray structures of 6b and 7.CH2Cl2 have been determined. In 6b, the N-N length is 1.35(2) A, consistent with the anion radical description; in 7.CH2Cl2 the length is 1.27(1) A. The spin-bearing extended Huckel HOMO in a model of 6 is found to be approximately 70% azo-pi* in character associated with a small metal contribution. An electronic band observed in the range 600-700 nm in solutions of 6 is assigned to the HOMO --> LUMO transition, the LUMO being 95% pyridine-pi* in character. One-electron paramagnetic 6 displays well-defined anisotropic EPR features near g = 2.00. The anisotropy arises from the metal character of HOMO and is magnified by the large spin-orbit coupling in osmium. In a moisture-free environment 6 is indefinitely stable in the solid state, but in CH2Cl2-MeCN solution 6a is rapidly oxidized by air, affording [Os(pap)(Br)(CO)(PPh3)2]+, 6a+, which has been isolated as the diamagnetic PF6- salt; 6b+PF6- has been similarly prepared. The voltammetric reduction potentials of the 6+/6 couple follow the order 6a+/6a < 6b+/6b, and the carbon monoxide stretching frequencies follow the order 6a < 6b and 6a+ < 6b+. These trends are consistent with the pi-acidity order pap < abp. Crystal data are as follows: (6b, C47H38BrN4OOsP2) monoclinic, space group P21/c (no. 14), a = 10.215(4) A, b = 17.634(7) A, c = 22.473(8) A, beta = 97.67(3) degrees , Z = 4; (7.CH2Cl2, C49H42BrCl2N3OOsP2) monoclinic, space group P2(1/n) (no. 14), a = 15.323(7) A, b = 15.201(6) A, c = 19.542(7) A, beta = 92.51(3) degrees, Z = 4.

Koro in an industrial setting.

This case of classical koro in a 52 year old male describes three essential characteristics, i.e., acute exacerbation of chronic anxiety, fear of genital retraction and fear that the complete disappearance of the organ into the abdomen will result in death. Various etiological, developmental and personality factors in the genesis of anxiety have been discussed. The patient was treated with anxiolytics, antidepressants and dual sex therapy and was followed up for five years.