Investigations on oxygen limitations of adherent cells growing on macroporous microcarriers.

Macroporous microcarriers are commonly applied to fixed and fluidized bed bioreactors for the cultivation of stringent adherent cells. Several investigations showed that these carriers are advantageous in respect to a large surface area (Griffiths, 1990; Looby, 1990a).When growing a rC-127 cell line on Cytoline 2 (Pharmacia Biotech), no satisfactory product yield could be achieved. A possible limitation in the supply of nutrient components was investigated to explain these poor results. No significant concentration gradients could be detected. Nevertheless, fluorescence staining revealed a decreasing viability, particularly inside the macroporous structure. Therefore, oxygen transfer to and into the carriers was examined by means of an oxygen microprobe during the entire process. Additional mathematical modeling supported these results.The maximum penetration depth of oxygen was determined to be 300 µm. A critical value influencing the oxygen uptake rate of the rC-127 cells occured at a dissolved oxygen concentration of 8% of air saturation. A significant mass transfer resistance within a laminar boundary film at the surface of the carrier could be detected. This boundary layer had a depth of 170 µm. The results showed that even a 40% air saturation in the bulk liquid could not provide an efficient oxygenation of the surface biofilm during the exponential growth phase. Fluorescent staining reveals a poor viability of cells growing inside the carrier volume. Thus, oxygen supply limits the growth of rC-127 cells on macroporous microcarriers. Poor process performance and low product yield could be explained this way.

Assessment of a disc stack centrifuge for use in mammalian cell separation.

A prototype disc stack centrifuge was tested for the separation of mammalian cell cultures from 80- and 2000-L fermentations. The clarification capacity for mammalian cells was excellent, but some smaller particles remained in the supernatant and reduced its usefulness for downstream processing. In order to identify the source of such particle formation, several parameters were assessed and minimum particle size for separation was calculated. An analysis of particle distribution was performed. Temperature and pressure effects inside the centrifuge bowl were measured. Some modifications of mechanical engineering can be suggested for the improvement of the use of standard disc stack centrifuges for mammalian cells. (c) 1995 John Wiley & Sons, Inc.

Clarification of animal cell cultures on a large scale by continuous centrifugation.

Animal cells from 80-L and 2000-L fed batch fermentations were removed by a prototype disc stack centrifuge in order to achieve a fast and reliable separation of solids from large quantities of cell culture fluids. The clarification capacity was excellent for animal cells but particles remained in the liquid phase and affected further downstream processing of the cell-free harvest fluid. No significant loss of product was observed. A number of parameters were monitored to optimize process conditions for use with animal cells.