Time-varying microplastic contributions of a large urban and industrial area to river sediments.

The quantification of microplastic (MP) pollution in rivers is often constrained by a lack of historical data on a multi-decadal scale, which hinders the evaluation of public policies. In this study, MP contents and trends were analyzed in dated sediment cores sampled upstream and downstream of a large metropolis, in environmental deposits that exhibited consistent sedimentation patterns from the 1980s to 2021. After a thorough sedimentological analysis, MPs were quantified in samples by micro Fourier Transform InfraRed spectroscopy (µFTIR imaging) and a density separation and organic matter digestion procedure. Microplastics recorded in the upstream core are relatively ubiquitous all along the dated sequence. The results also confirmed a sever increase of microplastics levels in the downstream core, by one order of magnitude, and an increase of polymer types. Polypropylene, polyethylene, and polystyrene represent ubiquitous contamination and were predominant at the two stations, whereas polyvinyl chloride and polytetrafluoroethylene were suspected to be abundant at the downstream station, but were not detected at the upstream station. Their presence could be linked to local contamination from specific industrial sources that manufactured and utilized these polymers. Surprisingly, in the downstream station sediment has recorded a relative improvement in polymers associated with industrial sources since the 2000s and, to a lesser extent, for ubiquitous ones since the 2010s. This trend of mitigation diverges from that of global assessments, that assume uncontrolled MP pollution, and suggest that European Union wastewater policy and regulation on industrial discharges have positively influenced water quality, and certainly also on MPs. However, the accumulation of microplastics remains high in recent deposits and raises the emerging concern of the long-term management of these reservoirs.

Investigation of the photosynthetic response of Chlorella vulgaris to light changes in a torus-shape photobioreactor.

An efficient use of light is essential to achieve good performances in microalgae cultivation systems. This can be challenging particularly under solar conditions where light is highly dynamic (e.g., day/night cycles, rapid changes in wind and weather conditions). Microalgae display different mechanisms to optimize light use efficiency. In the short term, when high light is encountered, several processes of photoprotection can be involved to avoid cell damages (e.g., xanthophyll cycle). In the long term, when cells are exposed to a different light intensity, pigment content changes, i.e., photoacclimation. The purpose of this study is to investigate the photosynthetic response of Chlorella vulgaris cultures grown in closed lab-scale, torus-shape photobioreactor under well-controlled light conditions, namely, constant and dynamic light transitions. Experiments were conducted in continuous mode with detailed characterization of the light attenuation conditions for each condition, as represented by the mean rate of photon absorption (MRPA), so as to characterize the time responses of the photosynthetic cells toward light changes. This enables to observe short-term and long-term responses with their own characteristic times. The mechanisms involved were found to be different between increasing and decreasing light transitions. Furthermore the MRPA was found a valuable parameter to relate the effect of light to biological responses (i.e., pigment changes) under constant light and dynamic light conditions.Key points• MRPA proved valuable to relate C. vulgaris responses to light changes.• A linear evolution was found between pigment content and MRPA in continuous light.• A rising PFD step induced fast protection and acclimation mechanisms.

Effect of design dark fraction on the loss of biomass productivities in photobioreactors.

Design dark fraction reflects the unlit part of a microalgal culture system, as for example a hydraulic loop used for temperature or pH regulation, or a circulating pump for mixing purposes. This study investigates the impact of design dark fraction on photosynthetic biomass productivity of the eukaryotic microalgae Chlorella vulgaris. The effect of the volume of the dark fraction and the residence time spent in this dark fraction was investigated with two different nitrogen sources (N-NH4+, N-NO3-). Results showed a decrease of biomass productivity when the volume of the dark fraction and the dark residence time increased. Up to 47% loss of biomass productivity could be reached for a design dark fraction [Formula: see text] = 30% of the total culture system volume. This loss was explained as a result of metabolic reactions related to an increase of respiration activity or a decrease of photosynthetic activity in the cells.

Screening of freshwater and seawater microalgae strains in fully controlled photobioreactors for biodiesel production.

Strain selection is one of the primary hurdles facing cost-effective microalgal biodiesel production. Indeed, the strain used affects both upstream and downstream biodiesel production processes. This study presents a screening procedure that considers the most significant criteria in microalgal biodiesel production including TAG production and wet extraction and recovery of TAGs. Fourteen freshwater and seawater strains were investigated. Large variation was observed between the strains in all the screening criteria. The overall screening procedure ultimately led to the identification of Parachlorella kessleri UTEX2229 and Nannochloropsis gaditana CCMP527 as the best freshwater and seawater strains, respectively. They featured the largest areal TAG productivity equal to 2.7×10(-3) and 2.3×10(-3)kgm(-2)d(-1), respectively. These two strains also displayed encouraging cell fragility in a high pressure bead milling process with 69% and 98% cell disruption at 1750bar making them remarkable strains for TAG extraction in wet environment.

Hydrothermal liquefaction of Nannochloropsis oceanica in different solvents.

Although the hydrothermal liquefaction is considered a promising technology for converting microalgae into liquid biofuels, there are still some disadvantages. This paper demonstrated that the bio-oil yield can be significantly improved by adding alcohols as co-solvents and carrying out the conversion at mild conditions (<250°C), but at the expense of a reduced bio-oil quality. By adding ethanol, the bio-oil yields obtained (up to ∼60%) were comparable to the yield obtained at severe operating conditions using only water as solvent (54±2% on average), but the quality of the bio-oil was lower. However, the main advantages of the process here described lie in the utilisation of wet microalgae (∼75% moisture) and alcohol concentrations which avoid both drying the microalgae and decreasing the amount of microalgae loaded in the reactor.

A novel pre-treatment for the methane production from microalgae by using N-methylmorpholine-N-oxide (NMMO).

The aim of this work was to study the effect of the solvent N-methylmorpholine-N-oxide (NMMO) to pre-treat Nannochloropsis oculata before the anaerobic digestion process. The results indicated that the pre-treatment affects the characteristics of the cell wall, which consequently becomes more susceptible to the microorganisms attack during anaerobic digestion. The methane production was increased by 43% after the pre-treatment, from 238±6mLCH4/gVS until 339±4mLCH4/gVS. On the contrary, the methane production from Chlorella vulgaris decreased after the pre-treatment from 251±4mLCH4/gVS to 231±3mLCH4/gVS. The failure on the pre-treatment was attributed to the particular characteristics of the substrate in consequence of a previous drying step.

Development and validation of a screening procedure of microalgae for biodiesel production: application to the genus of marine microalgae Nannochloropsis.

Nannochloropsis has emerged as a promising alga for biodiesel production. However, the genus consists of 6 species and hundreds of strains making strain selection a challenge. Furthermore, oil productivity is instrumental to economic viability of any algal strain for industrial production, which is dependent on growth rate and oil content. In most cases, these two parameters have been studied independently. Thus, the goal of this study is to provide a combined method for evaluating strain performance in specially designed photobioreactors together with an in-depth lipidomic analyses. The nine strains of Nannochloropsis tested showed considerable variations in productivity and lipidomics highlighting the importance of strain selection. Finally, Nannochloropsis gaditana CCMP527 and Nannochloropsis salina CCMP537 emerged as the two most promising strains, with an oil content of 37 and 27 dry wt% after 11-day nitrogen starvation, respectively, resulting in TAG productivity of 13×10(-3) and 18×10(-3) kg m(-3) d(-1), respectively.

The culture of Chlorella vulgaris in a recycled supernatant: effects on biomass production and medium quality.

Reusing supernatant of microalgae culture medium can have inhibitory or toxic effects on the biomass production because of the release of organic metabolites by cells in the culture medium during their growth. This work investigated the impact of Chlorella vulgaris medium recycling on culture productivity, cells quality and accumulation of excreted metabolites in the culture medium. No significant impact on the C. vulgaris growth was observed after 63days of recycling, the productivity remained stable at around 0.55kgm(-3)day(-1). Organic matters accumulated in supernatant were identified as biopolymers (BP) poor in nitrogen and with a size above 40kDa (probably polysaccharides), and small organic molecules (SOM) richer in nitrogen with a molecular size ranging from 1 to 3kDa. The concentration of biopolymers in the supernatant increased till to a maximum and then decreased, possibly consumed by bacteria, whereas small organic compounds accumulated in the medium.

Development and validation of a minimal growth medium for recycling Chlorella vulgaris culture.

When microalgae culture medium is recycled, ions (e.g. Na(+), K(+), Ca(2+)) that were not assimilated by the microalgae accumulate in the medium. Therefore, a growth medium (HAMGM) was developed that included ions that were more easily assimilated by Chlorella vulgaris, such as ammonium one (NH(4)(+)). Recycling performance was studied by carrying out 8-week continuous cultivation of C. vulgaris with recycled HAMGM medium. No loss of biomass productivity was observed compared to culture in a conventional medium, and accumulation of ions over time was negligible.

Investigation of fatty acids accumulation in Nannochloropsis oculata for biodiesel application.

Lipids production of the marine microalga species Nannochloropsis oculata was deeply investigated by studying under continuous light the effects of different nitrogen starvation strategies in photobioreactors of various thicknesses. Operating parameters like incident photons flux density (PFD), initial nitrogen (progressive starvation strategy) or biomass concentrations (sudden starvation strategy) were examined, with a detailed analysis of their effects on the quality and production kinetics of total (TL) and triglycerides (TG). In addition to the already known effect of nitrogen starvation to trigger reserve lipids accumulation (mainly TG), it was demonstrated the relevance of the light received per cell affecting TG content and productivities, as well as fatty acids (FA) profiles. With appropriate optimization, N. oculata was confirmed as an interesting candidate for biodiesel application, with high FA accumulation (up to around 50%DW with 43%DW in TG-FA), high productivity (maximum 3.6×10(-3)kg(TG-FA)m(-2)d(-1)) and a TG-FA profile close to palm oil.

Peroneus quartus and functional ankle instability.

INTRODUCTION: Physical and rehabilitation medicine physicians commonly see patients with chronic functional ankle instability. The main anatomical structures involved in ankle stability are the peroneus (fibularis) brevis and peroneus longus muscles. Several anatomical muscle-tendon variations have been described in the literature as being sometimes responsible for this instability, the peroneus quartus muscle being the most frequent. The objective of this clinical study is to discuss the implication of the bilateral peroneus quartus muscle in functional ankle instability. CLINICAL CASE: This 26-year-old patient was seen in PM&R consultation for recurrent episodes of lateral ankle sprains. The clinical examination found a moderate hyperlaxity on the right side in bilateral ankle varus. We also noted a bilateral weakness of the peroneus muscles. Additional imaging examinations showed a supernumerary bilateral peroneus quartus. The electroneuromyogram of the peroneus muscles was normal. DISCUSSION: In the literature the incidence of a supernumerary peroneus quartus muscle varies from 0 to 21.7%. Most times this muscle is asymptomatic and is only fortuitously discovered. However some cases of chronic ankle pain or instability have been reported in the literature. It seems relevant to discuss, around the clinical case of this patient, the impact of this muscle on ankle instability especially when faced with lingering weakness of the peroneus brevis and longus muscles in spite of eccentric strength training and in the absence of any neurological impairment. One of the hypotheses, previously described in the literature, would be the overcrowding effect resulting in a true conflict by reducing the available space for the peroneal muscles in the peroneal sheath.

Kinetic modeling of light limitation and sulfur deprivation effects in the induction of hydrogen production with Chlamydomonas reinhardtii. Part II: Definition of model-based protocols and experimental validation.

Photosynthetic hydrogen production under light by the green microalga Chlamydomonas reinhardtii was investigated in a torus-shaped PBR in sulfur-deprived conditions. Culture conditions, represented by the dry biomass concentration of the inoculum, sulfate concentration, and incident photon flux density (PFD), were optimized based on a previously published model (Fouchard et al., 2009. Biotechnol Bioeng 102:232-245). This allowed a strictly autotrophic production, whereas the sulfur-deprived protocol is usually applied in photoheterotrophic conditions. Experimental results combined with additional information from kinetic simulations emphasize effects of sulfur deprivation and light attenuation in the PBR in inducing anoxia and hydrogen production. A broad range of PFD was tested (up to 500 µmol photons m(-2) s(-1) ). Maximum hydrogen productivities were 1.0 ± 0.2 mL H2 /h/L (or 25 ± 5 mL H2 /m(2) h) and 3.1 mL ± 0.4 H2 /h L (or 77.5 ± 10 mL H2 /m(2) h), at 110 and 500 µmol photons m(-2) s(-1) , respectively. These values approached a maximum specific productivity of approximately 1.9 mL ± 0.4 H2 /h/g of biomass dry weight, clearly indicative of a limitation in cell capacity to produce hydrogen. The efficiency of the process and further optimizations are discussed.

Effect of prolonged hypoxia in autotrophic conditions in the hydrogen production by the green microalga Chlamydomonas reinhardtii in photobioreactor.

In the context of hydrogen production by the green alga Chlamydomonas reinhardtii, the control of light attenuation conditions is used to set-up anoxia under illuminated and autotrophic conditions, without affecting photosynthetic capacities of cells (as with sulphur deprivation or PSII inhibitors like DCMU). This paper presents a full description of the protocol where the incident photons flux density (PFD) is adapted during cultivation in order to obtain a sufficiently low illuminated fraction γ under 0.25 leading to anoxic hydrogen producing conditions during several days. The protocol is validated in a torus-shape photobioreactor (PBR) revealing after few days of anoxic conditions a peak of hydrogen production (1.44 ml H2/h/l of culture; [0.8-1.0] ml H2/h/g of dry weight biomass) concomitant with a decrease of biomass concentration, protein content and maximal photosynthetic yield. Effect of over-accumulating starch, as being known to increase hydrogen production by the PSII-independent pathway, is also investigated.

Systematic investigation of biomass and lipid productivity by microalgae in photobioreactors for biodiesel application.

We describe a methodology to investigate the potential of given microalgae species for biodiesel production by characterizing their productivity in terms of both biomass and lipids. A multi-step approach was used: determination of biological needs for macronutrients (nitrate, phosphate and sulphate), determination of maximum biomass productivity (the "light-limited" regime), scaling-up of biomass production in photobioreactors, including a theoretical framework to predict corresponding productivities, and investigation of how nitrate starvation protocol affects cell biochemical composition and triggers triacylglycerol (TAG) accumulation. The methodology was applied to two freshwater strains, Chlorella vulgaris and Neochloris oleoabundans, and one seawater diatom strain, Cylindrotheca closterium. The highest total lipid content was achieved with N. oleoabundans (25-37% of DW), while the highest TAG content was found in C. vulgaris (11-14% of DW). These two species showed similar TAG productivities.

Investigation of biomass and lipids production with Neochloris oleoabundans in photobioreactor.

The fresh water microalga Neochloris oleoabundans was investigated for its ability to accumulate lipids and especially triacylglycerols (TAG). A systematic study was conducted, from the determination of the growth medium to its characterization in an airlift photobioreactor. Without nutrient limitation, a maximal biomass areal productivity of 16.5 g m(-2) day(-1) was found. Effects of nitrogen starvation to induce lipids accumulation was next investigated. Due to initial N. oleoabundans total lipids high content (23% of dry weight), highest productivity was obtained without mineral limitation with a maximal total lipids productivity of 3.8 g m(-2) day(-1). Regarding TAG, an almost similar productivity was found whatever the protocol was: continuous production without mineral limitation (0.5 g m(-2) day(-1)) or batch production with either sudden or progressive nitrogen deprivation (0.7 g m(-2) day(-1)). The decrease in growth rate reduces the benefit of the important lipids and TAG accumulation as obtained in nitrogen starvation (37% and 18% of dry weight, respectively).

Optimal selection of organic solvents for biocompatible extraction of beta-carotene from Dunaliella salina.

In the aim of beta-carotene biocompatible extraction, toxicity of various pure solvents belonging to different homologous series has been investigated for Dunaliella salina. The results showed that solvents having logP(oct) > 5 or having a molecular weight over 150 g/mol can be considered biocompatible for this microalga. The membrane critical solvent concentration for each series of solvents has been calculated applying Osborne's model, showing that the aliphatic chlorinated hydrocarbon is the most toxic family studied. Mixtures of a biocompatible solvent (decane) with a toxic solvent (CH(2)Cl(2), MEK, MTBE) have been studied. The beta-carotene extraction ability of CH(2)Cl(2)-decane mixture was found six times more efficient than with pure decane. It has been demonstrated that the extraction ability of solvent depends on its affinity with the product extracted and on its concentration incorporated in the cellular membrane.

[The relationship between the rigorous practice of sports and addictions: results from a survey in south-eastern France]. / Pratique sportive intensive et addictions: une enquête en région PACA.

This study aimed to assess the prevalence of cigarette, alcohol and cannabis consumption among top-ranked French student athletes aged between 16-24 years old, and to identify correlating factors. Overall, 837 athletes participated in the study (82% response rate). Among females, the amount and duration of sporting activity in which they were engaged on a weekly basis had a negative correlation to cigarette smoking and the occasional use of cannabis. Among males, however, a positive correlation of these factors was observed for cigarette smoking. Other determinants of alcohol, tobacco and cannabis use were the level of athletic competition and whether the athlete practiced a team sport (as opposed to an individual one), with some gender variations. Two major risk factors for young adult athletes were the existence of high psychological distress (for both sexes) and a lack of family support (particularly in the case of males). Further research is needed to investigate the specific motives to use so-called "recreational" drugs among young athletes engaging in high-level competition.

A fully predictive model for one-dimensional light attenuation by Chlamydomonas reinhardtii in a torus photobioreactor.

The light attenuation in a photobioreactor is determined using a fully predictive model. The optical properties were first calculated, using a data bank of the literature, from only the knowledge of pigments content, shape, and size distributions of cultivated cells which are a function of the physiology of the current species. The radiative properties of the biological turbid medium were then deduced using the exact Lorenz-Mie theory. This method is experimentally validated using a large-size integrating sphere photometer. The radiative properties are then used in a rectangular, one-dimensional two-flux model to predict radiant light attenuation in a photobioreactor, considering a quasi-collimated field of irradiance. Combination of this radiative model with the predictive determination of optical properties is finally validated by in situ measurement of attenuation profiles in a torus photobioreactor cultivating the microalgae Chlamydomonas reinhardtii, after a complete and proper characterization of the incident light flux provided by the experimental set-up.

[Medicolegal aspects of doping in sports]. / Dopage en milieu sportif, approche médicolégale: conséquences sur les prescriptions en rééducation fonctionnelle et en traumatologie sportive.

OBJECTIVES: To investigate the medico-legal aspects of national and international procedures for monitoring prescription drug use by competing athletes. METHODS: We studied the French law No. 99-223 of March 23, 1999, relating to the protection of the health of athletes? We also studied annual statistics from the Ministry of Sports concerning anti-doping controls, substances detected by the National Doping Control Laboratory and penalties applied since 2000, as well as the World Anti-Doping Code, which came into effect on January 1, 2004, and should be universally applied by 2006. RESULTS: Athletes registered with a federation or unregistered athletes taking part in competitions approved by sporting federations can use prescription drugs but must follow strict rules. Athletes under investigation for drug use must declare all drugs or products recently taken. The use of prescription drugs not on the list of the prohibited substances is allowed, but evidence of the use of such drugs is the responsibility of the prescriber. A medical practitioner in France who considers it essential to prescribe prohibited drugs or drugs under certain restrictions must systematically inform the athlete about the regulations by providing various certificates and forms. For international athletes, a form authorizing therapeutic use must be submitted to the validation committee of the applicable international federation. Disciplinary, ordinal and penal sanctions are also described. CONCLUSION: Prescription drug use by an athlete is never a light matter and always engages the responsibility of the doctor. Anti-doping controls and sanctions encourage physicians to comply scrupulously with the medico-legal rules set forth by the public health code and the world anti-doping code.

Effects of a splitter plate in the near wake of a divergent trailing edge.

This paper discusses experimental research aimed at defining a base drag reduction device based on splitter plates. The unsteady three-dimensional nature of the flow is studied by Schlieren photography, particle image velocimetry, and measurement of the total unsteady lift and drag loads.