New Twist on the Light-Switch Effect: Controlling the Fate of Excited States with pH in a 4-Hydroxy-thiazol-extended Ruthenium(II) Dppz Complex.

We present a pH-dependent study of the excited state dynamics of a novel Ru complex bearing a 4-hydroxy thiazol-substituted dppz (dipyridophenazine) ligand (RuTzOH) and its deprotonated form (RuTzO-). We combine steady-state and time-resolved absorption and emission spectroscopy with electrochemical investigations to characterize the excited state relaxation, which upon photoexcitation at 400 nm is determined by a multitude of initially populated MLCT states for both complexes. Subsequently, for RuTzOH, two long-lived excited states are populated, leading to dual emission from the complexes, a feature that vanishes upon deprotonation. Upon deprotonation, the electron density on the dppz moiety increases significantly, leading to rapid energy populating ligand-centered states and thus deactivating the initially excited MLCT states.

Excited-State Dynamics Leading Either to Triplet Formation or Coordinative Expansion following Photolysis of Cu(II)-Porphyrins: A DFT, TD-DFT, Luminescence and Femtosecond Time-Resolved Absorbance Study.

The photophysical properties of Cu(II) complexes with 5,10,15,20-meso-tetrakis(phenyl)porphyrin and 5,10,15,20-meso-tetrakis(N-methylpyridium-4-yl)porphyrin are examined via the luminescence and femtosecond time-resolved absorbance methods, respectively. These studies are supported by DFT and TD-DFT calculations, which highlight the important role played by ligand-to-metal charge-transfer states in directing the system toward either intersystem crossing to the triplet hypersurface or coordinative expansion to a five-coordinate quasi-stable intermediate. The latter processes occur when the porphyrin is photolyzed in the presence of suitably located Lewis bases. Femtosecond time-resolved absorbance measurements of Cu(II)-5,10,15,20-meso-tetrakis(N-methylpyridium-4-yl)porphyrin confirm that the coordinative expansion in water occurs in approximately 700 fs, while crossing to the triplet hypersurface takes approximately 140 fs in the same solvent. These processes are mutually exclusive, although both can occur simultaneously depending on the environment of the porphyrin. The ratio of the two processes depends on the relative orientation of the Lewis base with respect to the copper atom at the time of excitation. As a consequence, copper porphyrins such as these are excellent probes in the environment of the porphyrin and can be used to identify the location of the porphyrin when interacting with DNA fragments.

Ligand-Structure Effects on N-Heterocyclic Carbene Rhenium Photo- and Electrocatalysts of CO2 Reduction.

Three novel rhenium N-heterocyclic carbene complexes, [Re]-NHC-1-3 ([Re] = fac-Re(CO)3Br), were synthesized and characterized using a range of spectroscopic techniques. Photophysical, electrochemical and spectroelectrochemical studies were carried out to probe the properties of these organometallic compounds. Re-NHC-1 and Re-NHC-2 bear a phenanthrene backbone on an imidazole (NHC) ring, coordinating to Re by both the carbene C and a pyridyl group attached to one of the imidazole nitrogen atoms. Re-NHC-2 differs from Re-NHC-1 by replacing N-H with an N-benzyl group as the second substituent on imidazole. The replacement of the phenanthrene backbone in Re-NHC-2 with the larger pyrene gives Re-NHC-3. The two-electron electrochemical reductions of Re-NHC-2 and Re-NHC-3 result in the formation of the five-coordinate anions that are capable of electrocatalytic CO2 reduction. These catalysts are formed first at the initial cathodic wave R1, and then, ultimately, via the reduction of Re-Re bound dimer intermediates at the second cathodic wave R2. All three Re-NHC-1-3 complexes are active photocatalysts for the transformation of CO2 to CO, with the most photostable complex, Re-NHC-3, being the most effective for this conversion. Re-NHC-1 and Re-NHC-2 afforded modest CO turnover numbers (TONs), following irradiation at 355 nm, but were inactive at the longer irradiation wavelength of 470 nm. In contrast, Re-NHC-3, when photoexcited at 470 nm, yielded the highest TON in this study, but remained inactive at 355 nm. The luminescence spectrum of Re-NHC-3 is red-shifted compared to those of Re-NHC-1 and Re-NHC-2, and previously reported similar [Re]-NHC complexes. This observation, together with TD-DFT calculations, suggests that the nature of the lowest-energy optical excitation for Re-NHC-3 has π→π*(NHC-pyrene) and dπ(Re)→π*(pyridine) (IL/MLCT) character. The stability and superior photocatalytic performance of Re-NHC-3 are attributed to the extended conjugation of the π-electron system, leading to the beneficial modulation of the strongly electron-donating tendency of the NHC group.

Improving the Management and Treatment of Diabetic Foot Infection: Challenges and Research Opportunities.

Diabetic foot infection (DFI) management requires complex multidisciplinary care pathways with off-loading, debridement and targeted antibiotic treatment central to positive clinical outcomes. Local administration of topical treatments and advanced wound dressings are often used for more superficial infections, and in combination with systemic antibiotics for more advanced infections. In practice, the choice of such topical approaches, whether alone or as adjuncts, is rarely evidence-based, and there does not appear to be a single market leader. There are several reasons for this, including a lack of clear evidence-based guidelines on their efficacy and a paucity of robust clinical trials. Nonetheless, with a growing number of people living with diabetes, preventing the progression of chronic foot infections to amputation is critical. Topical agents may increasingly play a role, especially as they have potential to limit the use of systemic antibiotics in an environment of increasing antibiotic resistance. While a number of advanced dressings are currently marketed for DFI, here we review the literature describing promising future-focused approaches for topical treatment of DFI that may overcome some of the current hurdles. Specifically, we focus on antibiotic-impregnated biomaterials, novel antimicrobial peptides and photodynamic therapy.

Exploiting a Neutral BODIPY Copolymer as an Effective Agent for Photodynamic Antimicrobial Inactivation.

We report the synthesis and photophysical properties of a neutral BODIPY photosensitizing copolymer (poly-8-(4-hydroxymethylphenyl)-4,4-difluoro-2,6-diethynyl-4-bora-3a,4a-diaza-s-indacene) containing ethynylbenzene links between the BODIPY units. The copolymer absorbs further towards the red in the UV-vis spectrum compared to the BODIPY precursor. Photolysis of the polymer produces a singlet excited state which crosses to the triplet surface in less than 300 ps. This triplet state was used to form singlet oxygen with a quantum yield of 0.34. The steps leading to population of the triplet state were studied using time-resolved spectroscopic techniques spanning the pico- to nanosecond timescales. The ability of the BODIPY polymer to generate a biocidal species for bactericidal activity in both solution- and coating-based studies was assessed. When the BODIPY copolymer was dropcast onto a surface, 4 log and 6 log reductions in colony forming units/ml representative of Gram-positive and Gram-negative bacteria, respectively, under illumination at 525 nm were observed. The potent broad-spectrum antimicrobial activity of a neutral metal-free copolymer when exposed to visible light conditions may have potential clinical applications in infection management.

Ruthenium Assemblies for CO2 Reduction and H2 Generation: Time Resolved Infrared Spectroscopy, Spectroelectrochemistry and a Photocatalysis Study in Solution and on NiO.

Two novel supramolecular complexes RuRe ([Ru(dceb)2(bpt)Re(CO)3Cl](PF6)) and RuPt ([Ru(dceb)2(bpt)PtI(H2O)](PF6)2) [dceb = diethyl(2,2'-bipyridine)-4,4'-dicarboxylate, bpt = 3,5-di(pyridine-2-yl)-1,2,4-triazolate] were synthesized as new catalysts for photocatalytic CO2 reduction and H2 evolution, respectively. The influence of the catalytic metal for successful catalysis in solution and on a NiO semiconductor was examined. IR-active handles in the form of carbonyl groups on the peripheral ligand on the photosensitiser were used to study the excited states populated, as well as the one-electron reduced intermediate species using infrared and UV-Vis spectroelectrochemistry, and time resolved infrared spectroscopy. Inclusion of ethyl-ester moieties led to a reduction in the LUMO energies on the peripheral bipyridine ligand, resulting in localization of the 3MLCT excited state on these peripheral ligands following excitation. RuPt generated hydrogen in solution and when immobilized on NiO in a photoelectrochemical (PEC) cell. RuRe was inactive as a CO2 reduction catalyst in solution, and produced only trace amounts of CO when the photocatalyst was immobilized on NiO in a PEC cell saturated with CO2.

Photophysics of Ruthenium(II) Complexes with Thiazole π-Extended Dipyridophenazine Ligands.

Transition-metal-based donor-acceptor systems can produce long-lived excited charge-transfer states by visible-light irradiation. The novel ruthenium(II) polypyridyl type complexes Ru1 and Ru2 based on the dipyridophenazine ligand (L0) directly linked to 4-hydroxythiazoles of different donor strengths were synthesized and photophysically characterized. The excited-state dynamics were investigated by femtosecond-to-nanosecond transient absorption and nanosecond emission spectroscopy complemented by time-dependent density functional theory calculations. These results indicate that photoexcitation in the visible region leads to the population of both metal-to-ligand charge-transfer (1MLCT) and thiazole (tz)-induced intraligand charge-transfer (1ILCT) states. Thus, the excited-state dynamics is described by two excited-state branches, namely, the population of (i) a comparably short-lived phenazine-centered 3MLCT state (τ ≈ 150-400 ps) and (ii) a long-lived 3ILCT state (τ ≈ 40-300 ns) with excess charge density localized on the phenazine and tz moieties. Notably, the ruthenium(II) complexes feature long-lived dual emission with lifetimes in the ranges τEm,1 ≈ 40-300 ns and τEm,2 ≈ 100-200 ns, which are attributed to emission from the 3ILCT and 3MLCT manifolds, respectively.

A Time-Resolved Spectroscopic Investigation of a Novel BODIPY Copolymer and Its Potential Use as a Photosensitiser for Hydrogen Evolution.

A novel 4,4-difuoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) copolymer with diethynylbenzene has been synthesised, and its ability to act as a photosensitiser for the photocatalytic generation of hydrogen was investigated by time-resolved spectroscopic techniques spanning the ps- to ns-timescales. Both transient absorption and time-resolved infrared spectroscopy were used to probe the excited state dynamics of this photosensitising unit in a variety of solvents. These studies indicated how environmental factors can influence the photophysics of the BODIPY polymer. A homogeneous photocatalytic hydrogen evolution system has been developed using the BODIPY copolymer and cobaloxime which provides hydrogen evolution rates of 319 µmol h-1 g-1 after 24 h of visible irradiation.

Photo-activated CO-release in the amino tungsten Fischer carbene complex, [(CO)5WC(NC4H8)Me], picosecond time resolved infrared spectroscopy, time-dependent density functional theory, and an antimicrobial study.

Picosecond time-resolved infrared spectroscopy was used to probe the photo-induced early state dynamics preceding CO loss in the Fischer carbene complex, [(CO)5WC(NC4H8)CH3]. Time-dependent density functional theory calculations were employed to help in understanding the photochemical and photophysical processes leading to CO-loss. Electrochemical initiated CO release was quantified using gas chromatography. The potential of [(CO)5WC(NC4H8)CH3], as an antimicrobial agent under irradiation conditions was studied using a Staphylococcus aureus strain.

Photochemical or electrochemical bond breaking - exploring the chemistry of (µ2-alkyne)Co2(CO)6 complexes using time-resolved infrared spectroscopy, spectro-electrochemical and density functional methods.

The photochemistry of (µ2-CRCR')Co2(CO)6 complexes (R = pyrenyl, R' = H; R = pyrenyl, R' = ferrocenyl; R = ferrocenyl, R = H) was investigated by ps-time-resolved infrared spectroscopy at room temperature in dichloromethane solution. The main focus of these studies was to determine the primary photoprocess relevant to the light assisted Pauson-Khand reaction. These studies were supported by spectro-electrochemical investigations and density functional calculations which suggest that the primary process to initiate the Pauson-Khand reaction involves a homolytic cleavage of the Co-Co bond forming a high-spin diradical species and not CO-loss as previously thought.

Photoelectrocatalytic H2 evolution from integrated photocatalysts adsorbed on NiO.

A new approach to increasing the faradaic efficiency of dye-sensitised photocathodes for H2 evolution from water, using integrated photocatalysts, furnished with ester groups on the peripheral ligands, [Ru(decb)2(bpt)PdCl(H2O)](PF6)2 (1) and [Ru(decb)2(2,5-bpp)PtI(CH3CN)](PF6)2 (2), (decb = 4,4'-diethylcarboxy-2,2'-bipyridine, bpp = 2,2':5',2''-terpyridine, bpt = 3,5-bis(2-pyridyl)-1,2,4-triazole) is described. Overall, 1|NiO is superior to previously reported photocathodes, producing photocurrent densities of 30-35 µA cm-2 at an applied bias of -0.2 V vs. Ag/AgCl over 1 hour of continuous white light irradiation, resulting in the generation of 0.41 µmol h-1 cm-2 of H2 with faradaic efficiencies of up to 90%. Furthermore, surface analysis of the photocathodes before and after photoelectrocatalysis revealed that the ruthenium bipyridyl chromophore and Pd catalytic centre (1) were photochemically stable, highlighting the benefits of the approach towards robust, hybrid solar-to-fuel devices.

Hydrogen-Generating Ru/Pt Bimetallic Photocatalysts Based on Phenyl-Phenanthroline Peripheral Ligands.

Recent studies on hydrogen-generating supramolecular bimetallic photocatalysts indicate a more important role of the peripheral ligands than expected, motivating us to design a Ru/Pt complex with 4,7-diphenyl-1,10-phenanthroline peripheral ligands. Photoinduced intra- and inter-ligand internal conversion processes have been investigated using transient absorption spectroscopy, spanning the femto- to nanosecond timescale. After photoexcitation and ultrafast intersystem crossing, triplet states localised on either the peripheral ligands or on the bridging ligand/catalytic unit are populated in a non-equilibrated way. Time-resolved photoluminescence demonstrates that the lifetime for the Ru/Pt dinuclear species (795±8 ns) is significantly less than that of the mononuclear analogue (1375±20 ns). The photocatalytic studies show modest hydrogen turnover numbers, which is possibly caused by the absence of an excited state equilibrium. Finally, we identify challenges that must be overcome to further develop this class of photocatalysts and propose directions for future research.

Enhancing Photocatalytic Hydrogen Generation: the Impact of the Peripheral Ligands in Ru/Pd and Ru/Pt Complexes.

The synthesis, photophysical properties and photocatalytic efficiency of a range of novel supramolecular assemblies of the type [Ru(dceb)2 (µ-bisbpy)MCl2 ][PF6 ]2 and [Ru(bpy)2 (µ-bisbpy)MCl2 ][PF6 ]2 (M=Pd or Pt, dceb=diethyl 2,2'-bipyridine-4,4'-dicarboxylate, bpy=2,2'-bipyridine and bisbpy=2,2':5',3'':6'',2'''-quaterpyridine) are reported. Photocatalytic hydrogen generation was dependent on the nature of the peripheral ligand, on the catalytic centre and on the amount of water present in the photocatalytic mixture. The best catalytic conditions were obtained with the dceb peripheral ligand (turnover numbers up to 513 after 18 h). The experimental data and DFT calculations on both the bpy- and dceb-based compounds indicated that the peripheral dceb ligands participated in the photocatalytic process.

Peripheral ligands as electron storage reservoirs and their role in enhancement of photocatalytic hydrogen generation.

The contrasting early-time photodynamics of two related Ru/Pt photocatalysts with very different photocatalytic H2 generation capabilities are reported. Ultrafast equilibration (535 ± 17 fs) creates an electron reservoir on the peripheral ligands of the ester substituted complex, allowing a dramatic increase in photocatalytic performance. This insight opens the way towards a novel design strategy for H2 generating molecular photocatalysts.

Subtle Changes to Peripheral Ligands Enable High Turnover Numbers for Photocatalytic Hydrogen Generation with Supramolecular Photocatalysts.

The photocatalytic generation of hydrogen (H2) from protons by two cyclometalated ruthenium-platinum polypyridyl complexes, [Ru(bpy)2(2,5-bpp)PtIS](2+) (1) and [Ru(dceb)2(2,5-bpp)PtIS](2+) (2) [where bpy = 2,2'-bipyridine, 2,5-bpp = 2,2',5',2″-terpyridine, dceb = 4,4'-di(carboxyethyl)bipyridine, and S = solvent], is reported. Turnover numbers (TONs) for H2 generation were increased by nearly an order of magnitude by the introduction of carboxyethyl ester units, i.e., from 80 for 1P to 650 for 2P after 6 h of irradiation, with an early turnover frequency (TOF) increasing from 15 to 200 h(-1). The TON and TOF values for 2P are among the highest reported to date for supramolecular photocatalysts. The increase correlates with stabilization of the excited states localized on the peripheral ligands of the light-harvesting Ru(II) center.

Supramolecular bimetallic assemblies for photocatalytic hydrogen generation from water.

A series of supramolecular assemblies of the type [Ru(L-L)2(L'-L)MX2)](n+) are reported where L-L is 2,2'-bipyridine (bipy), 4,4'-di-tetra-butyl-bipyridine (tbbipy) or 4,4'-diethoxycarbonyl-2,2'-bipyridine (dceb), L-L' is tetrapyrido[3,2-a:2',3'-c:3'',2''-h:2''',3'''-j]phenazine (tpphz), 2,2':5',2''-terpyridine (2,5-bpp), 2,2':6',2''-terpyridine, (2,6-bpp), 2,5-di(pyridine-2-yl)pyrazine (2,5-dpp) or 2,3-di(pyridine-2-yl)pyrazine (2,3-dpp), and MX2 is PdCl2, PtCl2 or PtI2. The photocatalytic behaviour with respect to hydrogen generation of these compounds and their ultrafast photophysical properties are discussed as a function of the nature of the peripheral ligands, the bridging ligands and the catalytic centre. The results obtained show how differences in the chemical composition of the photocatalysts can affect intramolecular photoinduced electron transfer processes and the overall photocatalytic efficiency.

An investigation into the photochemistry of, and the electrochemically induced CO-loss from, [(CO)5MC(OMe)Me](M = Cr or W) using low-temperature matrix isolation, picosecond infrared spectroscopy, cyclic voltammetry, and time-dependent density functional theory.

The photophysics and photochemistry of [(CO)5MC(OMe)Me] (M = Cr or W) were investigated using picosecond time-resolved infrared spectroscopy (M = Cr or W), low-temperature matrix isolation techniques (M = Cr), and time-dependent density functional calculations (M = Cr or W). These studies provide unambiguous evidence for the photochemical formation of a long-lived, 18-electron metallaketene species capable of acting as a synthetically useful intermediate. For the Cr complex, an intermediate metallacyclopropanone singlet excited state was detected on the reaction path to the metallaketene species. This metallacyclopropanone excited state species has a lifetime of less than 100 ps and a characteristic bridging carbonyl band at 1770 cm(-1). The tungsten ketene species was also detected but in contrast to the chromium system, this forms directly from a low-lying triplet excited state. The electrochemical release of CO showed a greater efficiency for the chromium complex when compared to the tungsten.

Carboxy derivatised Ir(III) complexes: synthesis, electrochemistry, photophysical properties and photocatalytic hydrogen generation.

In this contribution the synthesis and characterisation of a series of novel mixed ligand iridium(iii) complexes, functionalised with a carboxy ester or phosphonate groups are reported. These groupings are introduced on the 4-position of either the phenyl pyridine or the 2,2'-bipyridyl ligands. A low temperature high yield synthesis for the precursor [Ir(ppy-COOEt)2(µ-Cl)]2 was developed. The photophysical and electrochemical properties of these compounds are also described, together with their behaviour as photosensitisers for the generation of hydrogen from water.

Controlled CO release using photochemical, thermal and electrochemical approaches from the amino carbene complex [(CO)5CrC(NC4H8)CH3].

Multimodal photo, thermal and electrochemical approaches toward CO release from the amino carbene complex [(CO)5CrC(NC4H8)CH3] is reported. Picosecond time resolved infrared spectroscopy was used to probe the photo-induced early state dynamics leading to CO release, and DFT calculations confirmed that CO release occurs from a singlet excited state.

Excited state evolution towards ligand loss and ligand chelation at group 6 metal carbonyl centres.

The photochemistry and photophysics of three model "half-sandwich" complexes (η(6)-benzophenone)Cr(CO)3, (η(6)-styrene)Cr(CO)3, and (η(6)-allylbenzene)Cr(CO)3 were investigated using pico-second time-resolved infrared spectroscopy and time-dependent density functional theory methods. The (η(6)-benzophenone)Cr(CO)3 complex was studied using two excitation wavelengths (470 and 320 nm) while the remaining complexes were irradiated using 400 nm light. Two independent excited states were detected spectroscopically for each complex, one an unreactive excited state of metal-to-arene charge-transfer character and the other with metal-to-carbonyl charge transfer character. This second excited state leads to an arrested release of CO on the pico-second time-scale. Low-energy excitation (470 nm) of (η(6)-benzophenone)Cr(CO)3 populated only the unreactive excited state which simply relaxes to the parent complex. Higher energy irradiation (320 nm) induced CO-loss. Irradiation of (η(6)-styrene)Cr(CO)3, or (η(6)-allylbenzene)Cr(CO)3 at 400 nm provided evidence for the simultaneous population of both the reactive and unreactive excited states. The efficiency at which the unreactive excited state is populated depends on the degree of conjugation of the substituent with the arene π-system and this affects the efficiency of the CO-loss process. The quantum yield of CO-loss is 0.50 for (η(6)-allylbenzene)Cr(CO)3 and 0.43 for (η(6)-styrene)Cr(CO)3. These studies provide evidence for the existence of two photophysical routes to CO loss, a minor ultrafast route and an arrested mechanism involving the intermediate population of a reactive excited state. This reactive excited state either relaxes to reform the parent species or eject CO. Thus the quantum yield of the CO-loss is strongly dependent on the excitation wavelength. Time-dependent density functional theory calculations confirm that the state responsible for ultrafast CO-loss has significant metal-centred character while the reactive state responsible for the arrested CO-loss has significant metal-to-carbonyl charge-transfer character. The CO-loss product (η(6)-allylbenzene)Cr(CO)2 formed following irradiation of (η(6)-allylbenzene)Cr(CO)3 reacts further with the pendent alkenyl group to form the chelate product (η(6),η(2)-allylbenzene)Cr(CO)2.