Technological review on thermochemical conversion of COVID-19-related medical wastes.

COVID-19 pandemic has brought tremendous environmental burden due to huge amount of medical wastes (about 54,000 t/d as of November 22, 2020), including face mask, gloves, clothes, goggles, and sanitizer/disinfectant containers. A proper waste management is urgently required to mitigate the spread of the disease, minimize the environmental impacts, and take their potential advantages for further utilization. This work provides a prospective review on the possible thermochemical treatments for those COVID-19 related medical wastes (CMW), as well as their possible conversion to fuels. The characteristics of each waste are initially analyzed and described, especially their potential as energy source. It is clear that most of CMWs are dominated by plastic polymers. Thermochemical processes, including incineration, torrefaction, pyrolysis, and gasification, are reviewed in terms of applicability for CMW. In addition, the mechanical treatment of CMW into sanitized refuse-derived fuel (SRDF) is also discussed as the preliminary stage before thermochemical conversion. In terms of material flexibility, incineration is practically applicable for all types of CMW, although it has the highest potential to emit the largest amount of CO2 and other harmful gasses. Furthermore, gasification and pyrolysis are considered promising in terms of energy conversion efficiency and environmental impacts. On the other hand, carbonization faces several technical problems following thermal degradation due to insufficient operating temperature.

Lithium recovery from spent Li-ion batteries using coconut shell activated carbon.

Lithium is one of scarce natural resources in the world that need to be preserve. One of the way in preserving the resource is by recovery the rich source of the lithium such as in the spent batteries. It is necessary to develop a recovery method which is efficient and low-cost to be able to recover the lithium in an economic scale. In this study, low-cost activated carbon (AC) from coconut shell charcoal was prepared by chemical and physical activation methods and tested for Li removal from Co, Mn, and Ni ions in semi-continuous columns adsorption experiments. The maximum surface area is 365 m2/g with the total pore volume is 0.148 cm3/g that can be produced by physical activation at 800 °C. In the same activation temperature, activation using KOH has larger ratio of micropore volume than physical activation. Then, the adsorption capacity and selectivity of metal ions were investigated. A very low adsorption capacity of AC for Li ions in batch adsorption mode provides an advantage in column applications for separating Li from other metal ions. The AC sample with chemical activation provided better separation than the samples with physical activation in the column adsorption method. During a certain period of early adsorption (lag time), solution collected from the column outlet was found to be rich in Li due to the fast travel time of this light element, while the other heavier metal ions were mostly retained in the AC bed. The maximum lag time is 97.3 min with AC by KOH activation at 750 °C.