Thermo-desorption measurements during N-doped Ge-rich Ge2Sb2Te5crystallization.

Ge-rich Ge2Sb2Te5(GGST) is considered as one of the best candidates for industrial phase change memory production. GGST memory cells are generally embedded with Si or Ti nitride layers to prevent oxidation, as it leads to an undesired decrease of the GGST crystallization temperature. Furthermore, GGST films are usually doped with elements such as N, C, O, or Bi, aiming to delay GGST crystallization during the fabrication process as well as during memory cell operation. In this work, ultrahigh vacuum thermal desorption spectroscopy (TDS) was performed during isochronal annealing of a N-doped GGST film covered by a 10 nm-thick TiNxlayer. Desorption is observed before GGST crystallization, but the comparison between TDS andin situx-ray diffraction measurements shows that the main desorption peak, observed between 653 K and 703 K, occurs after GGST full crystallization. The most prominent desorbing species are Ar, N2, H2, and H. These results show that the TiNxpolycrystalline layer cannot prevent N atoms from leaving the GGST layer during annealing, suggesting a progressive change of the N-doped GGST chemical composition during thermal annealing and crystallization.

Kinetic Monte Carlo simulations of Ge-Sb-Te thin film crystallization.

Simulation of atomic redistribution in Ge-Sb-Te (GST)-based memory cells during SET/RESET cycling is needed in order to understand GST memory cell failure and to design improved non-volatile memories. However, this type of atomic scale simulations is extremely challenging. In this work, we propose to use a simplified GST system in order to catch the basics of atomic redistribution in Ge-rich GST (GrGST) films using atomistic kinetic Monte Carlo simulations. Comparison between experiments and simulations shows good agreements regarding the influence of Ge excess on GrGST crystallization, as well as concerning the GST growth kinetic in GrGST films, suggesting the crystallized GST ternary compound to be off-stoichiometric. According to the simulation of atomic redistribution in GrGST films during SET/RESET cycling, the film microstructure stabilized during cycling is significantly dependent of the GST ternary phase stoichiometry. The use of amorphous layers exhibiting the GST ternary phase stoichiometry placed at the bottom or at the top of the GrGST layer is shown to be a way of controlling the microstructure evolution of the film during cycling. The significant evolution of the local composition in the amorphous solution during cycling suggests a non-negligible variation of the crystallization temperature with operation time.

Spatially controlled positioning of coordination polymer nanoparticles onto heterogeneous nanostructured surfaces.

Prussian Blue Analog (PBA) nanoparticles were formed on a heterogeneous nanostructured surface made of an ordered nanoperforated titanium oxide thin film deposited on a gold layer. The study of the nanocomposite film by grazing-incidence wide angle X-ray scattering, infrared spectroscopy, scanning electron microscopy and atomic force microscopy shows that the PBA particles are precisely positioned within all the perforations of the oxide film over very large surface areas. Further investigation on the formation of the PBA particles demonstrates a decisive role of a heterogeneous nucleation of the coordination polymer driven by well-adjusted surfaces energies and reactant concentrations in the spatial positioning of the PBA particles. Thanks to the well-controlled positioning of the particles within the ordered nanoperforations, the latter were successfully used as nano crucibles for the local transformation of PBA into the corresponding metal alloy by heat treatment. The thin film heterostructure thus obtained, made of ferromagnetic islands isolated by diamagnetic walls, opens interesting perspectives for the design of magnetic storage devices.