En Route to a Molecular Terminal Tin Oxide.

In the pursuit of terminal tin chalcogenides, heteroleptic stannylenes bearing terphenyl- and hexamethyldisilazide ligands were reacted with carbodiimides to yield the respective guanidinato complexes. Further supported by quantum chemical calculations, this revealed that the iso-propyl-substituted derivative provides the maximum steric protection achievable. Oxidation with elemental selenium produced monomeric terminal tin selenides with four-coordinate tin centers. In reactions with N2O as oxygen transfer reagent, silyl migration toward putative terminal tin oxide intermediates gave rise to tin complexes with terminal ─OSiMe3 functionality. To prevent silyl migration, the silyl groups were substituted with cyclohexyl moieties. This analogue exhibited distinctively different reactivities toward selenium and N2O, yielding a 1,2,3,4,5-tetraselenastannolane and chalcogenide-bridged dimeric compounds, respectively.

Boosting quantum yields and circularly polarized luminescence of penta- and hexahelicenes by doping with two BN-groups.

The incorporation of boron-nitrogen (BN) units into polycyclic aromatic hydrocarbons (PAHs) as an isoelectronic replacement of two carbon atoms can significantly improve their optical properties, while the geometries are mostly retained. We report the first non-π-extended penta- and hexahelicenes comprising two aromatic 1,2-azaborinine rings. Comparing them with their all-carbon analogs regarding structural, spectral and (chir)optical properties allowed us to quantify the impact of the heteroatoms. In particular, BN-hexahelicene BN[6] exhibited a crystal structure congruent with its analog CC[6], but displayed a fivefold higher fluorescence quantum yield (φfl = 0.17) and an outstanding luminescence dissymmetry factor (|glum| = 1.33 × 10-2). Such an unusual magnification of both properties at the same time makes BN-helicenes suitable candidates as circularly polarized luminescence emitters for applications in materials science.

Synthesis and crystal structure of bis-(9-mesityl-9,10-di-hydro-10-aza-9-borabenzo[h]quinolinato-κ2N1,N10)zinc(II).

The title compound, [Zn(C20H18BN2)2] (Zn L 2), is an overall uncharged chelate that consists of two units of an NH-deprotonated 10-aza-9-borabenzo[h]quinoline ligand (L) per ZnII center. It was synthesized in two steps by treating the protonated ligand HL with lithium bis-(tri-methyl-sil-yl)amide and further conversion with di-ethyl-zinc. Its asymmetric unit comprises one ZnL fragment; the mol-ecule is completed by application of inversion symmetry at Zn. Due to the fourfold coordination with nitro-gen atoms, the zinc(II) ion is located in a distorted tetra-hedral environment. Besides the relatively short N-Zn bonds, Zn L 2 is characterized by the significant protrusion of the central ion from the plane of the ligand backbone. The crystal structure is consolidated by intra- and inter-molecular π-π stacking inter-actions, while the polarized B-N bond is barely involved in any close atom contacts.

A Photomechanical Film in which Liquid Crystal Design Shifts the Absorption into the Visible Light Range.

Liquid crystalline polymer networks (LCN) with azobenzene monomers bend reversibly under UV-light irradiation, combining photomechanical and photothermal effects. However, the harmful nature of UV-light limits their use in biology and soft robotics. Although visible light-absorbing tetra-ortho-fluoro-substituted azobenzenes exist, liquid crystalline monomers have never been prepared. Previously, such azobenzenes were added as photoactive additives (up to 10%) to otherwise passive liquid crystalline polymer networks. In this work, a molecular design of a liquid crystalline, polymerizable azobenzene switchable by visible light is presented. The monomer assembles in a highly fluid nematic phase, but polymerizes in a layered smectic C phase. The films are produced solely from the monomer without additional liquid crystalline components and are actuated with visible light. Bending experiments in air and under water differentiate photomechanical and photothermal effects. Remarkably, a 60 µm splay aligned film maintains its deformation for hours, slowly reverting over days. Monomer liquid crystallinity is characterized using differential scanning calorimetry (DSC), wide-angle X-ray scattering (WAXS), and polarized optical microscopy (POM); polymer films are analyzed using WAXS and DSC on a homogeneously aligned film. The synthetic procedure is high yielding and polymer film fabrication is scalable, which enables the use of safe and efficient photomechanical LCNs in soft robotics, engineering and biology.

Nickel and Palladium Complexes of a PP(O)P Pincer Ligand Based upon a peri-Substituted Acenaphthyl Scaffold and a Secondary Phosphine Oxide.

A PP(O)P pincer ligand based upon a peri-substituted acenaphthyl (Ace) scaffold and a secondary phosphine oxide, (5-Ph2P-Ace-6-)2P(O)H, was prepared and fully characterized including a neutron diffraction study. The reaction with [Ni(H2O)6]Cl2 and PdCl2 produced ionic metal(II) complexes [κ3-P,P',P''((5-Ph2P-Ace-6-)2P(OH))MCl]Cl, which upon addition of Et3N gave rise to zwitterionic metal(II) complexes κ3-P,P',P''((5-Ph2P-Ace-6-)2P(O))MCl (M = Ni, Pd). The reaction with Ni(COD)2 (COD = cyclooctadiene) provided the η3-cyclooctenyl Ni(II) complex κ3-P,P',P''((5-Ph2P-Ace-6-)2P(O))Ni(η3-C8H13). A detailed complementary bonding analysis of the P-H, P-O, and P-M interactions was carried out (M = Ni, Pd).

Improvement in the Palladium-Catalyzed Miyaura Borylation Reaction by Optimization of the Base: Scope and Mechanistic Study.

Aryl boronic acids and esters are important building blocks in API synthesis. The palladium-catalyzed Suzuki-Miyaura borylation is the most common method for their preparation. This paper describes an improvement of the current reaction conditions. By using lipophilic bases such as potassium 2-ethyl hexanoate, the borylation reaction could be achieved at 35 °C in less than 2 h with very low palladium loading (0.5 mol %). A preliminary mechanistic study shows a hitherto unrecognized inhibitory effect by the carboxylate anion on the catalytic cycle, whereas 2-ethyl hexanoate minimizes this inhibitory effect. This improved methodology enables borylation of a wide range of substrates under mild conditions.

Sila-Ibuprofen.

The synthesis, characterization, biological activity, and toxicology of sila-ibuprofen, a silicon derivative of the most common nonsteroidal anti-inflammatory drug, is reported. The key improvements compared with ibuprofen are a four times higher solubility in physiological media and a lower melting enthalpy, which are attributed to the carbon-silicon switch. The improved solubility is of interest for postsurgical intravenous administration. A potential for pain relief is rationalized via inhibition experiments of cyclooxygenases I and II (COX-I and COX-II) as well as via a set of newly developed methods that combine molecular dynamics, quantum chemistry, and quantum crystallography. The binding affinity of sila-ibuprofen to COX-I and COX-II is quantified in terms of London dispersion and electrostatic interactions in the active receptor site. This study not only shows the potential of sila-ibuprofen for medicinal application but also improves our understanding of the mechanism of action of the inhibition process.

Selective Hydrogenation of α,ß-Unsaturated Aldehydes and Ketones by Air-Stable Ruthenium NNS Complexes.

The selective hydrogenation of the carbonyl functionality of α,ß-unsaturated aldehydes and ketones is catalysed by ruthenium dichloride complexes bearing a tridentate NNS ligand as well as triphenylphosphine. The tridentate ligand backbone is flexible, as evidenced by the equilibrium observed in solution between the cis- and trans-isomers of the dichloride precatalysts, as well as crystal structures of several of these complexes. The complexes are activated by base in the presence of hydrogen and readily hydrogenate carbonyl functionalities under mild conditions. Despite the activation by base, side reactions are negligible, even for aldehyde substrates, because of the low amount of base. Thus, the corresponding allylic alcohols can be isolated in very good yields on a 10-25 mmol scale. Turnover numbers up to 200 000 were achieved.